Monitor Files installed in system by installer

Hi all,
I have one installer of my application built through LabVIEW. I need to monitor the files like *.dll and other files which are installed on the system.
Can we get a list of files installed by the installer on the system for monitoring purposes?
Thanks.
-Parag D
-FraggerFox!
Certified LabVIEW Architect, Certified TestStand Developer
"What you think today is what you live tomorrow"
Solved!
Go to Solution.

I am quite sure that Labview installer is based on Microsoft Installer (MSI)
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Similar Messages

Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?

Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.

Hi,
Creating package doesn't mean it will install the product,
You will need to install the package now. Please follow the instructions mentioned in the below articles
Creative Cloud Help | Creating or editing packages
Creative Cloud Help | Deploying packages
Please let me know if it doesn't help.
Regards,
Devendra

Error phase Install Common system files SAP NW 7.1

Hello
I have a problem in my installation of SAP NW 7.1 for PI
I was installating the SAP NW but I stopped it and deleled this system (SID=TPI), then I started again the installation (SID=PI1) but in the phase Install Common System Files i got this message:
sapint_dev.log
           CJSlibModule::writeInfo_impl()
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO       2010-07-09 17:30:13.765
           CJSlibModule::writeInfo_impl()
File system node D:/usr/sap exists already. Nothing to do.
INFO       2010-07-09 17:30:13.765
           CJSlibModule::writeInfo_impl()
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921 [ianxbservi.hpp:244]
           CServiceHandle::Open(ClusSvc)
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR      2010-07-09 17:30:14.234 [sixxcstepexecute.cpp:984]
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING    2010-07-09 17:30:14.437 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2010-07-09 17:30:14.437 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO       2010-07-09 17:30:45.921 [sixxcstepexecute.cpp:1072]
An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories".
INFO       2010-07-09 17:30:48.640 [synxccuren.cpp:1016]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS)
           lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS.
   LOG sapint.log
INFO 2010-07-09 17:30:13.296
Execute step createFirstSystemDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0
INFO 2010-07-09 17:30:13.750
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437
FJS-00010 Could not get value for property
I had found information about saploc however still I got the same
The installation is on Windows 2003 + Sql 2005
Any suggestion    for this problem
Thanks
Danny

Hello
I deleted the system with the wizard on sapinst
NetWeaver Process Integration 7.1 Software Life-Cycle Options Uninstall Uninstall ‒ SAP systems or
single instances .
Danny
Edited by: Danny Sanchez on Jul 12, 2010 4:17 PM

I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock. Looked in applications and the mail application is missing. Any thoughts?

I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock. Looked in applications and the mail application is missing. Any thoughts?

Thanks Paul; but, taking your suggestion didn't solve the problem. As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS. I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock. Thanks again for trying.

Sapinstallation error in second step Install common system File.

Hi,
I am installing the SOLMAN on Linux RHEL5 and i am facing the error in second step Install common system File .
sapinst.log ERROR Logs ;
Output of /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh is written to the logfile installsapinit.sh.log.
WARNING 2011-08-15 09:56:21.770
Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.774
MUT-03011 Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.913
FCO-00011 The step installSAPInit with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_System|ind|ind|ind|ind|system|0|installSAPInit was executed with status ERROR ( Last error reported by the step: Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found).
Can any one please help me on this...

Hello,
the "uname" command is part of the coreutils package on RHEL. Please check if the coreutils package is installed:
rpm -qa | grep -i coreutils
If the coreutils package is not installed you can install it with
yum install coreutils
Regards,
Frank

Cannot update, repair, uninstall itunes in Windows7-64bit. Have itunes v10.5.0.142 installed but is missing "itunes64.msi" file . Need copy of itunes64.msi file which is located in the file folder ProgramData\Apple Computer\Installer Cache. Thanks.

Cannot update, repair, uninstall itunes in Windows 7-64bit. I have itunes version 10.5.0.142 installed but is missing the "itunes64.msi" file. Would like to obtain a copy of this file which is located in the file folder ProgramData\Apple Computer\Installer Cache. If someone could supply a copy of this file on this site, it would really be appreciated. Thanks in advance.

See Troubleshooting issues with iTunes for Windows updates for general advice.
If you want to install an older version of iTunes see http://support.apple.com/downloads/#itunes or OldApps.com.
tt2

Providing configuration file for SQL 2012 Express installation which installing HPC 2012 R2

Hi guys,
I need to know if there is any way to provide configuration file for SQL 2012 Express installation which installing HPC 2012 R2?
I am scripting installation on HPC 2012 R2 with default SQL 2012 Express edition but I am not able to find any option to provide a configuation file for SQL 2012 Express installaiton.
Thanks,
Vivs.

Hi Vivs,
As my understanding, you want to generate a configuration file and install SQL Server 2012 express edition using that configuration file.
If that is the case, firstly, you could generate the configuration file following the steps below since express edition is run in AutoAdvance mode which skips "Ready to Install" page.
1.Double-click SQL Server installation file in your local drive, you will see that the file will be extracted to a temporary folder. Please make a note of what directory it is extracted to. For example, it could be in c:\ followed by a folder name which
will be a set of random letters and numbers "gy7h8hjhhj67rfs7".
2.Cancel installation. Then click on the Start button on the task bar, click run, type the command cmd.exe, and go to that directory via cmd.
3.Execute the following command: setup.exe /ACTION=INSTALL /UIMODE=Normal
4.Follow the wizard through to the 'Ready to Install' page. The path to the configuration file is specified in the 'Ready to Install' page in the configuration file path section.
5.Cancel the setup without actually completing the installation, to generate the INI file.
Secondly, to install SQL Server using Command Prompt, go to the SQL Server installation media root (the temporary folder) from the command prompt and specify the ConfigurationFile.ini as a parameter as shown below.
Setup.exe /ConfigurationFile=ConfigurationFile.INI
For more information about the process, please refer to the article:
http://www.mssqltips.com/sqlservertip/2511/standardize-sql-server-installations-with-configuration-files/
Regards,
Michelle Li

When installing a system upgrade, do i need to backup my files, photos, etc. first?

When installing a system upgrade, do i need to backup my files, photos, etc. first?

No, you don't need to, but it is highly recommended. Upgrades can fail, the computer may fail, the may be a power outage, etc. Never be without a current backup. Never upgrade until after you make a backup.
I recommend making a bootable backup by cloning:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

MBP w/10.9.1, how to download the "Install OS X Mavericks" installer file

My MBP runs 10.9.1, would like to make a bootable recovery USB and need the "Install OS X Mavericks" installer to download from mac app store into the applications folder but it won't download because I already have mavericks installed.

You can redownload OS X Mavericks from the Mac App Store, so do it. You can do this even if OS X Mavericks is already installed.
However, if the Mac App Store says that OS X Mavericks is installed and you cannot download the installer, it means that you already have got the installer, so go to Applications folder and you will find it there. Then, use DiskMaker X to create a bootable USB drive with the Mavericks installer.
If you have got a Late 2013 MacBook Pro, note that you cannot download OS X Mavericks from the Mac App Store because that version is not supported. In this case, you cannot create a bootable USB drive, so you will only be able to reinstall OS X through the Recovery partition

REDHAT LINUX 7.3 on nForce based systems - An installation guide.

INSTALLING REDHAT LINUX 7.3 ON NFORCE BASED SYSTEMS.
A) Preface
I'm a Linux newbie, just sharing my experience with installing linux on nforce.
in my opinion Linux is a powerful but still a nascent operating system (in terms of user friendliness atleast!). many features are extremely 'release' and 'version' dependent. this means that, what works in redhat might not work in mandrake or what works in redhat 7.3 might not work in redhat 7.1 or likewise...
the steps i'm listing below just reflects how i went about installing RH 7.3 on my machine (K7N420D). it MAY not work for other versions or releases.
B) BIOS SETTINGS
1. I recommend, PnP disabled, ACPI/APIC disabled.
for Mandrake 8.2 install on some machines (mine included), i suggest disabling audio and network in the bios till you get a stable level 3 (console without X windows) or level 5 install. for some reason, sometimes, on some boards, Mandrake 8.2 hangs when probing audio and lan during boot.
C) PREPARING TO INSTALL
1. i suggest you get the three iso images from the internet and burn them into installation disks. though there are other ways of installing, this is the simplest way of doing it.
2. if you have windows installed already, make sure you have a windows boot floppy in case of boot problems, you can also make one for linux during installation.
3. using windows or fdisk strip off a sufficient chunk of hard disk space from an existing partition if you don't have a free partition. you need not create any partitions, just the non-allocated space would do. (as red hat can beautifully split this partition into /boot, / & swap partitions!)
4. i recommend using GRUB (GRand Unified Boot-loader) instead of LILO for boot management. if you prefer the same way, get good documentation/how-to for grub from the net. this will be handy if you mess up your boot partition and end up in a grub prompt during boot.
5. goto nvidia's drivers page and get appropriate drivers. i always recommend tar balls or src.rpm files instead of pre-compiled rpms. if you are using EXACT same version of the linux release as mentioned in the drivers page you can use rpms. If you wish to upgrade your kernel or use a different version of linux then make sure you have tar balls or source rpm files. make sure you also print the installation instructions from the same page.
6. the drivers you need are
a. NVIDIA_nforce-1.xxxx. - you need this one for audio & lan. (found in nforce link in drivers menu in nvidia site with an instruction manual)
b. NVIDIA_kernel-xxxx AND NVIDIA_GLX-xxxx- both these for Graphics in Xwindows. these two drivers should be exactly matched. i suggest you download all of them along with a files named NVchooser.sh found on the same page. NVchooser will tell you which pair to install for your linux kernel version and CPU.
D) LINUX INSTALLATION
1. boot from 1st installation disk that you made. go through the GUI installer and choose automatic partitioning, it will take you to the Disk Druid and you can select the partition in which you wanna install linux. if the partition you choose is unallocated, most of the times didk druid will make three patrtions on its own, one is /boot (boot partion), /swap (partition for swap, similar to ramdisk) and / (root partition). all the three mount-points may be allocated on the same partition too.
2. Choose GRUB (if you prefer) as boot loader and set Linux as primary boot OS and this page would've detected windows if you've already (it may appear as DOS). Choose "MBR" to install GrUB. If you get any warning ignore it. IMPORTANT: If you have NTFS partition for windows and you had windows as primary OS, there is a reported problem that says, in some versions of the linux installer, choosing MBR to install GRUB makes it hard to boot into windows. i haven't tried that option yet as i don't have a NTFS partition. If you have an NTFS partition, you may prefer to choose the other option to install GRUB or you may choose to install it later. in either case make sure you have a boot floppy to get you into linux or windows, whichever one you want.
3. choose automatic install if you don't want to control which packages you want to install. else choose expert installation and proceed with it.
4. when prompted to check the packages you want to install, choose "development tools" or something similar without fail. This is for installing a C compiler which is a must have for some driver installations. (this also installs perl and other dev tools, if you're an 'expert', there's an option in this page to custom select modules)
5. somewhere you'll be asked to provide a root password, in the same page there'll be a provision to add users other than root. create atleast one user other than root at this time.
4. somewhere you'll be shown a list of video adapters with NVIDIA Geforce 2 generic driver already highlighted. Below this screen you'll see a "Skip X install" or something similar. CHECK THIS TAB and this will NOT install the generic driver for your integrated GPU and also will not configure the GUI environment for Linux. This makes your video configuration a little easier.
5. now linux will install, get configured and will ask if you wanna create a boot floppy. make one just in case you
6. RH 7.3 will not recognize your APU and integrated LAN. you can install the drivers for this later.
7. After installation boot into Linux, if you just followed the steps above you'll nicely end up in level 3 console!
E) INSTALLING DRIVERS
1. Assuming you got all the drivers in CD/floppy, login as 'user', type command "su" (super user) supply root password, now you are logged in as root. read the installation manual for the NVIDIA drivers and install NVIDIA_nforce-1.xxxx drivers for audio/LAN. do these series of steps from the console prompt,
#vi /etc/modules.conf
press INSERT key, add the following lines,
alias eth0 mcpeth
alias sound-slot-1 i810_audio
alias usb-interface usb-ohci
press ESC, (Shift) colon, wq and Enter.
This will save the changes you made.
2. Now install the NVIDIA_kernel-xxxx AND NVIDIA_GLX-xxxx- drivers as per instructions. follow the steps below.
#XConfigurator
Choose settings that are relevant to the monitor you use and mode supported. Choose custom configuration wherever possible. If your monitor is not listed, choose 'custom' all the way through and provide hardware details such as horiz/vert freq range, video memory and clock settings (choose 'recommended').
DO NOT LET THE XCONFIGURATOR PROBE ANYTHING. sometimes this might cause a hang that is not necessary at all.
select all videomodes and color depths that you think your monitor will support and exit XConfigurator without any probing.
3. Now at the prompt do the following,
#vi /etc/X11/XF86Config-4
Press INSERT and make following changes.
replace line
Driver "nv"
with
Driver "nvidia"
In the Module section, make sure you have:
Load "glx"
Remove the following lines: (or put a hash before)
Load "dri"
Load "GLcore"
and the whole
Section "DRI" (last three lines usually, DRI may be in lower case usually)
Press Esc, (Shift) colon, wq, Enter to save and exit.
4. using vi make sure you have these lines in /etc/modules.conf file
alias char-major-195 NVdriver
5. edit /etc/rc.d/rc.local and insert
/sbin/modprobe nvaudio
/sbin/modprobe nvnet
save and exit. ( this is a crude way of loading modules but it works though!)
6. Type "reboot" at prompt and reboot your system.
7. get into bios and load original settings. (get back ACPI if you have windows, enable PnP OS etc)
8. During restart linux may get you into the kudzu installer to install network drivers/audio, ignore this.
9. login as "user" and type "startx" from console, your GUI should start smooth and you'll have video, sound, USB, LAN working (you need to fiddle a little bit more to get things work perfect) !
10. There is extensive documentation found in the internet on these topics, have fun exploring them.
F) TWEAKING YOUR HARD DRIVE
most of the modern hard drives support UDMA transfers and usually linux is pretty much conservative on this option. so you might want to force linux to use UDMA. the following discussion assumes that your hard drive is /dev/hda, change it to hdb, hdc etc as per your setup.
CAUTION: The 'hdparm' utility described here is a very powerful and dangerous if used improperly. USING hdparm IMPROPERLY MIGHT CORRUPT YOUR PARTITIONS AND RESULT IN SEVERE DATA LOSS. hdparm works with IDE drives. i'm not sure how it works on SCSI drives.
@ console,
1. type "man hdparm" and read through the hdparm manual atleast twice before you understand what it can do. THIS IS A MUST.
2. login as root or get into super user mode and try the following. all commands are shown after #
3. Benchmark the hard drive
# /sbin/hdparm -t -T /dev/hda
this should spit out the transfer rate both cached and sustained. note this value. if these values are close to what you expect out of your drive, you are OK. you may get out of further adventures! if the transfer rates are horrible like 3.5 Mbps etc (it was on my seagate ata IV drive!), then proceed with the tweaks. the golden rule is, after each tweak, run the benchmark and record your transfer rate. if there is no significant improvement, revert back to the default settings.
4. # /sbin/hdparm -i /dev/hda
note down MaxMultSect, MultSect, Modes supported : PIO/DMA, especially the mode with a 'star' in front of it. (prefered mode)
5. 32 bit I/O : to enable 32 bit I/O over the PCI bus
# /sbin/hdparm -c1 /dev/hda
this usually doubles your transfer rate if the drive supports. you may need to use -c3 for some chipsets.
6. Enable DMA and set DMA mode
if your drive supports DMA find out the prefered DMA mode using -i option.
# /sbin/hdparm -d1 -Xab /dev/hda, where
ab=64 + uDMA mode number (for eg. 66 for UDMA 2)
ab=32 + DMA mode number (for multi-word DMA mode)
you might need to prepare the chipset to enable DMA but on most of the modern hard dirves this works. refer to the "man hdparm" for details. beware, the options to 'prepare' the chipset for DMA should be used with EXTREME caution. if you do not know what you are doing, don't try it.
7. To set multiple sector mode I/O,
# /sbin/hdparm -m XX /dev/hda
where XX is the MaxMultSect value obtained using -i option. if the MaxSect is already set to this value, you need not tweak this.
after all these tweaks run the benchmark atleast three times consecutively and average the transfer rates. make sure you don't hear grinding noises in the hard drive. use these tweaks a couple of times manually and if verything appears to be working fine, add the necessary commands to the rc.local script to execute them automatically during start up.
G) FINAL WORDS
I assumed that you're a total 'newbie' to linux when writing this so i followed a conservative approach. most of the things that i described can be done in many ways, it's up to you to explore them! as usual, there MIGHT be typos and other serious errors in this guide. also the driver files that i might have mentioned here are the ones that were available when i wrote this. so you might wanna try their latest equivalents. i'm open to all healthy criticism and suggestions. when i installed linux on my nforce board, i was badly looking for an article like this on the net. i missed one, if it exists at all. so am i writing this. i hope you'll get benefitted by this in some way.
-Venk@

Venkat,
Thanks for this really really amazingly accurate and exhaustive post that helped me A LOT to install linux on my machine!!! Otherwise, I think I would still be hanging with a mandrake 8.2 trying to load sound...
My system is now fully functional but, (yes, there is a little but) I was not able to make the LAN function properly. When booting, while linux tries to load the ethernet module, I get something like:
'mcpeth device does not seem to be present, delaying eth0 initialiation'. Then, I open an X session, I try to use the network configurator, the ethernet device is there but when trying to activate, it fails... I swear I enabled the LAN in my BIOS.
I also tried to replace 'alias eth0 mcpeth' with 'alias eth0 nvnet' in /etc/modules.conf after reading the installation notes of NVIDIA drivers. I get a slighty different result: my boot error is now 'failed to load module'.
It is a shame I have to boot back to Windows to use my DSL connection. I think i need some insights. It will be greatly appreciated!
Thanks,
Chouch
>I'm a Linux newbie, just sharing my experience with
>installing linux on nforce.
Not bad for a Newbie...

IMPORT MONITOR JOBS ERROR IN ECC 6 INSTALLATION

WARNING 2014-12-18 23:54:18
Execution of the command "C:\Program Files\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "E:\ECC EXPORT 1\EXPORT_51031897-1\EXP1;E:\EXPORT 2\51031897-2\EXP2;E:\EXPORT 3\51031897-3\EXP3;E:\EXPORT 4\51031897-4\EXP4;F:\EXPORT 5\51031897-5\EXP5;F:\EXPORT 5\51031897-5\EXP6;F:\EXPORT 5\51031897-5\EXP7;F:\EXPORT 5\51031897-5\EXP8;F:\EXPORT 5\51031897-5\EXP9;F:\EXPORT 5\51031897-5\EXP10;F:\EXPORT 5\51031897-5\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe F:\usr\sap\AMC\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output: java version "1.4.2_13"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)Import Monitor jobs: running 1, waiting 3, completed 68, failed 0, total 72.Import Monitor jobs: running 2, waiting 2, completed 68, failed 0, total 72.Import Monitor jobs: running 3, waiting 1, completed 68, failed 0, total 72.Loading of 'SAPAPPL1_14' import package: ERRORLoading of 'SAPAPPL2_2' import package: ERRORImport Monitor jobs: running 1, waiting 1, completed 68, failed 2, total 72.Import Monitor jobs: running 1, waiting 1, completed 68, failed 2, total 72.Loading of 'D010TAB' import package: ERRORImport Monitor jobs: running 0, waiting 1, completed 68, failed 3, total 72.
this is the error i'm getting
i started oracle instance through command prompt but in vain. only four jobs r not completing.
i checked virtual memory.
please help me out.
thanks
krish

Hi Krish,
Welcome to SDN.
The installation log files would help figure out the exact error.
In the below case, the log file SAPAPPL2_2.LOG might give more information. Let us if the logs have any errors mentioned.
Logs should be in the <OS drive>\Program Files\sapinst_instdir\.... folfer.
Regards,
Srikishan

Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
2.5. After upgrade if I go to selfservice portal via
https://myserver.mycompany.com/selfservice, I get this error:
Server Error in '/SelfService' Application.
Could not load file or assembly 'System.Web.WebPages.Razor,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly
'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
System.Web.Mvc.PreApplicationStartCode.Start() +0
[InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
[HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
Anyone know how to solve this? Thanks in advance

Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
here.
If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

No JRE version found in launch file for this system

Hi,
I have an application which is launched by JWS.
When we use JWS from 1.4, it runs fine. But JWS from 1.5.0_15 gives the error "No JRE version found in launch file for this system"
In both the JWS(1.4 and 1.5.0_15)cases, we install JRE1.5.0_15 using the installer and used for invoking the application.
We invoke mailclient.jnlp, which inturn invokes the installer.jnlp and KanaJreInstaller.asp
<<mailclient.jnlp>>
<?xml version="1.0" encoding="utf-8"?>
<jnlp
spec="1.0"
codebase="http://mpshanmu-gx520:80/10r3/"
href="mailclient.jnlp">
<information>
<title>KANA Agent</title>
<vendor>KANA Software, Inc.</vendor>
<homepage href="http://www.kana.com"/>
<description>KANA Suite 10.3.0</description>
<icon href="images/mail_logo.gif"/>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="KANA1.5.0_15" href="KanaJreInstaller.asp"/>
<jar href="lib/mailclient_s.jar"/>
<jar href="lib/link_s.jar"/>
<jar href="lib/spell_s.jar"/>
<jar href="lib/ssce_s.jar"/>
<jar href="lib/kc_framework_s.jar"/>
<jar href="lib/kc_sharedGUI_s.jar"/>
<jar href="lib/xalan_s.jar"/>
<jar href="lib/xerces_s.jar"/>
<jar href="lib/java2com_s.jar"/>
<jar href="lib/jgl3.1.0_s.jar"/>
<jar href="lib/rsrcbundle_s.jar"/>
<jar href="lib/response_s.jar"/>
<jar href="lib/HTMLEditorEnterprise_s.jar"/>
<jar href="lib/jakarta-oro-2.0.4_s.jar"/>
<jar href="lib/jdic_s.jar"/>
<extension name="Sun Libraries" href="sunextensions.jnlp"/>
</resources>
<resources os="Windows">
<nativelib href="lib/windlls_s.jar"/>
<nativelib href="lib/jdic-native.jar"/>
</resources>
<application-desc main-class="kana.mail.wkstn.AppMain">
<argument>-serverlist</argument>
<argument>http://mpshanmu-gx520:80/10r3/servers.xml</argument>
</application-desc>
</jnlp>
<<KanaJreInstaller.asp>>
<%@ language="vbscript"%>
<%
Response.ContentType="application/x-java-jnlp-file"
Response.AddHeader "x-java-jnlp-version-id","KANA1.5.0_15"
dim fs,f,ts
set fs=Server.CreateObject("Scripting.FileSystemObject")
Set f=fs.GetFile("C:\Program Files\KANA\KANA Response Web Server_10r3\installer.jnlp")
Set ts=f.OpenAsTextStream(1)
Response.Write(ts.ReadAll)
ts.Close
set ts=nothing
set f=nothing
set fs=nothing
%>
<<installer.jnlp>>
<?xml version="1.0" encoding="utf-8"?>
<jnlp
spec="1.0"
codebase="http://mpshanmu-gx520:80/10r3/"
href="installer.jnlp">
<information><title>KANA J2RE 1.5.0_15 Installer</title>
<vendor>KANA Software, Inc.</vendor>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.3+"/>
<jar href="lib/installer.jar"/>
<jar href="lib/JRE_KANA1.5.0_15.jar"/>
<property name="jre.container" value="JRE_KANA1.5.0_15.jar"/>
<property name="jre.execute" value="bin\\javaw.exe"/>
<property name="jre.version" value="KANA1.5.0_15"/>
</resources>
<installer-desc main-class="JREInstaller"/>
</jnlp>
Thanks

>
We are using sun JRE(1.5.0_15) only. We extract Sun JRE and build it as KANAJRE.jar and signing.>I have never heard of KANAJRE. Would you care to post a link to the site, or should we just keep guessing? (My patience for random guesses is running out.)
>
We install using Intaller class and that is getting listed in the Java Control panel and enabled too.>List as what?
Does it list it with the entire string "KANA1.5.0_15" or is is just listed as "1.5.0_15"?
Because this line from the JNLP file..
<j2se version="KANA1.5.0_15" href="KanaJreInstaller.asp"/>..had me convinved it was a non-Sun JRE. Not so much the href, but most especially the version attribute.
If it really is the Sun JRE, I would expect this to work.
<j2se version="1.5.0_15" href="KanaJreInstaller.asp"/>And as an aside. If this installer is giving you trouble and the app. requires the 1.5.0_15 JRE, why not simply the default Sun JRE installer? What advantages do you think this installer offers?

N1 system manager installation faied (newer version of Java web console)

Hi,
I am trying to install Sun N1 system manager on Solaris x86 U3 + all patches. Once I run the installer I got:
N1SM Installer (version 1.3.2 on SunOS)
1. Install OS packages. [Completed]
2. Install Expect. [Completed]
3. Install IPMI tool. [Completed]
4. Install JDK 1.5. [Completed]
5. Install service provisioning components. [Completed]
6. Install OS provisioning components. [Completed]
7. Copy DHCP configuration file. [Completed]
8. Install user interface components. [Partially Run]
9. Install service container components. [Not Completed]
10. Install N1 System Manager. [Not Completed]
Failed Step: Install user interface components.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
The Sun Java(TM) Web Console software already installed (version 3.0.2)
is newer than the version (3.0) you are attempting to install.
Downgrading is not supported. If you wish to run the older version,
you can install it after unintalling the currently installed version.
Error running lockhart setup: 1792
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.9327.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x) x
Is there any way to continue my installation and using currently installed version of Java Web Console?

Tried removing the currently installed Java Web Console as described at http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l4?a=view
It says to simply run /usr/share/webconsole/bin/setup -u, however there is no setup binary in the listed dir.
# ls -l /usr/share/webconsole/bin/
total 396
-r-xr-xr-x 1 root sys 9995 Oct 9 08:18 smcwebserver
-r-xr-xr-x 1 root sys 6571 Oct 9 08:17 smloginmodule
-r-xr-xr-x 1 root sys 171907 Oct 9 08:17 smreg
-r-xr-xr-x 1 root sys 1456 Oct 9 08:17 smwebapp
-r-xr-xr-x 1 root sys 2917 Oct 9 08:17 wcadmin
# uname -a
SunOS host 5.10 Generic_118855-33 i86pc i386 i86pc
It seems the docs are wrong?

Erase & Install vs. Automatic Installation of Snow Leopard?

We have a MacMini running OS 10.4.11 and want to install Snow Leopard on it. One reason, among many, is that we want to run the newest version of Mac Dictate - v.1.5.8. We're concerned about different information we have received on which form of installation we need to make, and I know the installer options for Snow Leopard have changed from previous OSes. I'm not sure whether we can do an "Automatic" installation, or whether we have to do an "Erase & Install." Here's the conflicting information I've read or received, and I need some guidance on which is the best to follow.
Pogue in his "Missing Manual Snow Leopard" makes very clear that the new, improved and much smarter installer makes it so that there's "no longer any need for the classic "clean install"... every installation is, in effect, a clean install." He says that Snow Leopard can turn any OS X version 10.0 through 10.5-point-anything into version 10.6. He says, there are of course incompatible programs in the Applications folder, for which its one's job to check to make sure they've all been updated to 10.6-compatible versions.
However, the MacSpeech Mac Dictate people say, "if you are currently running 10.4.11 you will not be able to "upgrade" your operating system, you will have to do a clean install of Snow Leopard which will require your programs be reinstalled. For more information on Snow Leopard system requirements please contact Apple."
This seems to be in direct conflict with Pogue's information, which I have found to be extremely reliable - my go to source almost equal to the Apple discussion forums if I have a problem. But, Mac Dictate has a history of quirks. Is it possible that if I did an "automatic" install, the one program Mac Dictate could cause problems, or, not allow me to upgrade/install the new version of Mac Dictate?
Any help on this one? I'd like to do an automatic install and be able to utilize this improvement Apple made with the new OS, an easier installation process.
Thanks.

What about the possibility of older OS components that remain.
FWIW, I have never seen any credible evidence that this actually occurs. It seems to be a theory meant to explain some problems some users have after upgrading, but usually there are other reasons that could explain the same behavior that haven't been ruled out. AFAIK, it is kind of a "maybe/just in case" thing that justifies to some the "nuclear" solution of an erase & install to get rid of vaguely defined problems, including some unspecified 'left over' OS components that nobody seems able to identify.
Personally, I agree with Pogue & with several other users that post here frequently that consider an erase an unnecessary waste of time, except for a few very specific issues like a file system so corrupted that Disk Utility can't repair it or a HD not formatted with the GUID partition scheme.
If it were me & some company like the supplier of MacSpeech said "if you are currently running 10.4.11 you will not be able to 'upgrade' your operating system," I would at the very least ask specifically what they meant by that & why the scare quotes around the work "upgrade." This doesn't seem to have anything to do with the application itself or with installing it -- there is no mention I can find of this in any installation or upgrade instructions at the MacSpeech web site.

Monitor Files installed in system by installer

Similar Messages

Maybe you are looking for