Monitor Wireless services

Hi,
I would like to monitor Wireless services and I wonder if I could to this with an AP.
In one of our customer sites there are many problems with the wireless connections; we can monitor the RADIUS service, if the firewall is working correctly as well and any issue regards the wired network, also if the radio's AP are up/down by the WCS, but there is no garanty that the user with his laptop could associate to the AP in the correct SSID and have the wireless service unless we went to the site and verified it.
I read about the AP monitor mode, but, if I didn't misunderstand it, it only detects rogue AP, doesn't it? Is there any way in order to monito this service? Could an AP join to another AP as a client, in some similiar way an user could do it?
Many thanks in advanced!
Laura

Hi Laura
Yes, Monitor mode APs are mostly for enhanced rogue detection.
They do not support the feature you are mentioning (act as a client to connect to AP to validate radio)
This has been proposed in the past, and it is something we are tracking. I would suggest to get in contact with your account team, so they are aware of your needs, and this can help that the feature gets higher priority.
Thanks!

Similar Messages

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had t

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.

Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg

America's top number one wireless service...does not work in Puerto Rico

Please come back to Puerto Rico. I have been a member for over ten years. I live in Ohio and will have to relocate to Puerto Rico. My daughter is enrolled in college to become a school teacher in Puerto Rico. My family plan is not working well in Puerto Rico. I am paying for a family plan, (here in Ohio) and my daughter has two phones in Puerto Rico. They are not working. I had called Verizon Support, and was told that the phones must be mailed back to (Ohio) me here in the states to be reactivated. Verizon phones cannot be activated in Puerto Rico. I prefer only Verizon, which is why I have not switched to any other provider. But, because Verizon does not have towers or businesses in Puerto Rico, even though we have 4G phones, we now have no service in Puerto Rico. I am stuck with the choices of AT&T, T-Mobile, or Straight Talk from Wal-Mart, or the WORSE are the wireless and Internet services of Puerto Rico, Claro.. Claro has outages for DAYS and still expect full payment, regardless of how many days lost for service. Claro does not credit your account even if you had an outage for a week; you are still billed for the full month. It is difficult to avoid this company in Puerto Rico. This is a message to CEO of Verizon...please bring your business back to Puerto Rico. When people asked my daughter what service she uses, they were excited when she said that she uses Verizon. But were disappointed when she said that her account is back in (Ohio) the states, there are no stores here. I have to send (AGAIN) two new phones activated here in the states back to Puerto Rico, so that my daughter can still use our Verizon Family Plan. There is nothing Verizon Support can do. Once I move to Puerto Rico, there will be no one to send our phones to in (Ohio) the states to reactivate for our Verizon Family Plan. The phone service works for about three or four months, (in Ohio) than there is no service at all. Please bring America's top number wireless service back to Puerto Rico. Or Make some kind of deal with the wireless tower owners in Puerto Rico, so people that even visit Puerto Rico can use your phone service. Thank you for reading my request

Our home line has had no dial tone for two days now. When a repair was requested, we received a commitment of 8/8. That timing was not sufficient. I updated the repair request on line indicating that we needed the repair by today. I called this morning and a recording told me that Verizon was committed to repair the phone by 8pm tonight. Well, 9:30pm and no Verizon. I tried calling with my cell phone and sat on the phone for over 30 minutes. Either no one was home or it was past business hours. In any event, here we sit with no home phone service. We are elderly. My husband has a heart condition. I am grateful for our cell phones, not Verizon. What if we had a real emergency and didn't have cell phones? This is not customer service. We never even received a phone call or an email as we requested on the repair status. So sit another day or maybe more. Frustrated in NJ. P.S. Our experience with My Verizon is it sends you round and round and round with no real solution to your problem. Any suggestions? Thanks.

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Z

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Zip Code 22580.

Out of curiosity how much data per month are you using? Another factor could be if neighbors have all done the same thing as you and the node is being overloaded on home internet use.

Monitor all services on all servers?

Hi all
I'm looking for the easiest way of monitoring all services with startupmode=auto and alerts when state!=running. I found this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/dbb175c4-8ec0-4427-9d10-9382044144e7/monitor-all-windows-services-on-multiple-servers-and-recover?forum=operationsmanagerauthoring
So I took this code
Dim oAPI, oBag
Set oAPI = CreateObject("MOM.ScriptAPI")
Set oBag = oAPI.CreatePropertyBag()
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colListOfServices = objWMIService.ExecQuery _
("SELECT * FROM Win32_Service WHERE StartMode = 'Auto' AND Started = false")
If colListOfServices.Count > 0 Then
For Each objService in colListOfServices
If strDesc = "" Then
strDesc = objService.Caption
Else
StrDesc = StrDesc & ", " & objService.Caption
End if
Next
Call oBag.AddValue("Description", strDesc)
Call oBag.AddValue("State", "BAD")
Else
Call oBag.AddValue("State", "OK")
End if
Call oAPI.Return(oBag)
I used this in a two state monitor I created in our SCOM 2012 environment. For starters it runs every 2 minutes, it's enabled, monitor target is Windows Server 2008 Operating System, it's set to generate alerts on warning, the Unhealthy expression is:
Property[@Name='State'] Equals BAD
And the Healthy Expression is:
Property[@Name='State'] Equals GOOD
Unfortunately I'm getting no alerts at all. And I dont think I have any way of seeing if it's actually discovering all the services? AND I have no previous experience with vb scripting, but do have some powershell experience.
Any suggestions on how to get this up and running please?
Update: I just got alerts from all servers:
Workflow Runtime: Failed to run a process or script
The process started at 11:25:%1 failed to create System.PropertyBagData, no errors detected in the output. The process exited with 1.
Command executed "C:\Windows\System32\cscript.exe" /nologo "Company.ServiceMonitoring"

At the first point make sure that you are creating the service monitor in Authoring --> Management Pack Templates --> Windows Service.
The place where we change is within the discovery part and not monitor. Search for the text what you entered as Service Name while creating the service monitor. You should see something similar to this,
<Discovery ID="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec.DiscoveryRule" Enabled="false" Target="Windows!Microsoft.Windows.Computer" ConfirmDelivery="false" Remotable="true" Priority="Normal">
        <Category>Discovery</Category>
        <DiscoveryTypes>
          <DiscoveryClass TypeID="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec" />
        </DiscoveryTypes>
        <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.Win32ServiceInformationProviderWithClassSnapshotDataMapper">
          <ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
          <ServiceName>------------ServiceName>
          <Frequency>60</Frequency>
          <ClassId>$MPElement[Name="ServiceStateProbePage_5409ab4012384fb28dea99f892e28fec"]$</ClassId>
          <InstanceSettings>
            <Settings>
              <Setting>
                <Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
                <Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceName$</Name>
                <Value>$Data/Property[@Name='Name']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceProcessName$</Name>
                <Value>$Data/Property[@Name='BinaryPathName']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/DisplayName$</Name>
                <Value>$Data/Property[@Name='DisplayName']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/Description$</Name>
                <Value>$Data/Property[@Name='Description']$</Value>
              </Setting>
              <Setting>
                <Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
                <Value> </Value>
              </Setting>
            </Settings>
          </InstanceSettings>
        </DataSource>
      </Discovery>

The problem related to wireless service Wi-Fi connectivity Never work properly

Hi
i am bashair from KSA
I have iPhone 5, you update your iPhone to version 6.1.3
The problem related to wireless service Wi-Fi connectivity
Never work properly, you try Method posed but did not succeed..
i need help me please
thanks..

UPDATE
Hey this is totally weird. I haven't done jailbreak at all and I won't But how is possible that default apps such as Safari and Appstore have the problem I've mentioned before and Skyfire works perfectly without any trouble.
So to sum up:
Safari: loading stucks after few seconds on wi-fi, mostly doesn't load pictures
Appstore: loading stucks after few seconds on wifi and it keeps saying "loading"
Facebook and Youtube: doesn't load pictures
SKYFIRE: loads everything without any trouble
and completely everything works on Edge...
So tell me W.T.F. :-D

CSS 11501 7.40 Monitoring the services on real servers?

Hi,
Just want to ask some basic questions, How can i monitor the services (ie 80 and 443) of the real servers. So that when the CSS11501 detects that one of the services of one of the real servers is down, it will not forward the traffic to that server. Or is the CSS is configured to monitor the services by default?
Because we are planning to upgrade one of the webservers (web01) while web02 is running, if we shutdown the service 80 and 443, does it affect the end-user, will CSS automatically redirect it to web02?
Regards,
Marlon

Here is my sample configuration
!************************** SERVICE **************************
service WEB01-79-HTTP
ip address 172.20.13.4
keepalive type tcp
keepalive port 80
active
service WEB01-79-HTTPS
ip address 172.20.13.4
keepalive type tcp
keepalive port 443
active
service WEB01-80-HTTP
ip address 172.20.13.5
keepalive type tcp
keepalive port 80
active
service WEB01-80-HTTPS
ip address 172.20.13.5
keepalive type tcp
keepalive port 443
active
service WEB01-82-HTTP
ip address 172.20.13.6
keepalive type tcp
keepalive port 80
active
service WEB01-82-HTTPS
ip address 172.20.13.6
keepalive type tcp
keepalive port 443
active
service WEB01-83-HTTP
ip address 172.20.13.7
keepalive type tcp
keepalive port 80
active
service WEB01-83-HTTPS
ip address 172.20.13.7
keepalive type tcp
keepalive port 443
active
service WEB01-79
ip address 172.20.13.4
active
service WEB01-80
ip address 172.20.13.5
active
service WEB02-82
ip address 172.20.13.6
active
service WEB02-83
ip address 172.20.13.7
active
!*************************** OWNER ***************************
owner VRL
content VIP
redundancy-l4-stateless
content WEB-HTTP1
vip address 172.20.10.85
protocol tcp
port 80
advanced-balance sticky-srcip
add service WEB01-79-HTTP
add service WEB01-82-HTTP
redundancy-l4-stateless
active
content WEB-HTTP2
vip address 172.20.10.86
port 80
protocol tcp
advanced-balance sticky-srcip
add service WEB01-80-HTTP
add service WEB01-83-HTTP
redundancy-l4-stateless
active
content WEB-HTTPS1
advanced-balance sticky-srcip
vip address 172.20.10.85
protocol tcp
port 443
add service WEB01-79-HTTPS
add service WEB01-82-HTTPS
redundancy-l4-stateless
application ssl
sticky-inact-timeout 20
active
content WEB-HTTPS2
advanced-balance sticky-srcip
vip address 172.20.10.86
protocol tcp
port 443
add service WEB01-80-HTTPS
add service WEB01-83-HTTPS
redundancy-l4-stateless
application ssl
sticky-inact-timeout 20
active
content WEB01-79
add service WEB01-79
vip address 172.20.10.79
redundancy-l4-stateless
active
content WEB01-80
add service WEB01-80
vip address 172.20.10.80
redundancy-l4-stateless
active
content WEB02-82
add service WEB02-82
vip address 172.20.10.82
redundancy-l4-stateless
active
content WEB02-83
add service WEB02-83
vip address 172.20.10.83
redundancy-l4-stateless
active
!*************************** GROUP ***************************
group WEB01-79
add service WEB01-79
vip address 172.20.10.79
redundancy-l4-stateless
active
group WEB01-80
add service WEB01-80
vip address 172.20.10.80
redundancy-l4-stateless
active
group WEB02-82
add service WEB02-82
vip address 172.20.10.82
redundancy-l4-stateless
active
group WEB02-83
add service WEB02-83
vip address 172.20.10.83
redundancy-l4-stateless
active

Monitor all service Start with the word "SAP"

Hallo
i have sccm 2012
Can monitor services start with the word "SAP"
Instead of monitoring all service set separately .
thanks

Hi,
Did some research and came to the following solution
Open the System Center Operations Manager Console.
Go to Authoring and expand Management Pack Templates
Right Click Windows Service and click Add Monitoring Wizard
On the Monitoring Type page select Windows Service and click Next
Give the Service and store the it in a New Created Management Pack and click Next
On the Service Name Type SAP* on the Target group Select Windows Server Computer Group and click Next
On the Performance Data page click Next
On the Summary page click Create
Export the Management Pack pack you created
In the Management pack replace the following code:
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.Win32ServiceInformationProviderWithClassSnapshotDataMapper">
<ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<ServiceName>sap*</ServiceName>
<Frequency>60</Frequency>
With the following code
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.WmiProviderWithClassSnapshotDataMapper">
<NameSpace>root\cimv2</NameSpace>
<Query>select * from win32_service where name like 'sap%'</Query>
<Frequency>60</Frequency>
Second replace
<Value>$Data/Property[@Name='BinaryPathName']$</Value>
With
<Value>$Data/Property[@Name='PathName']$</Value>
Save the management pack and upload it to System Center Operations Manager.
In the Operations Console Click Monitoring
Click Discoverd Inventory and change the target type to the target you created. Then the view should look something like this:
I created the management pack You can download it from here: http://www.ms-opsmgr.eu/wp-content/uploads/Download/2015/SAP/SAP.Services.xml
GReetings Roel Knippen
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Vista-windows wireless service can't start......

Hi I have 2 XP desktops and a Vista Home laptop all sharing internet through a lynksys wireless router for weeks. I've had no problems untill a couple days ago, the Vista laptop suddenly couldnt see the network let alone connect to it. The WIFI light is on. Ive tried the useless repair connection button but it says "windows wireless service is not running on this computer" so i click repair only to be told it cant fix the problem. Is ther a way to start the service? I cant find it in services.mcs or msconfig. I ran sfc /scannow and it said there were errors but they couldnt be fixed. Ive tried everything and called Dell tech support but they say it has to be an OS error and all i can do is backup and reinstall the whole OS but I would prefer not to. Any ideas? Please help!!!!!!

Hi again,
As you all had the same problem, I had it too. I got a nasty virus/spyware and my anti-virus didn't got it.
After removing the virus/spyware, and when I wasn't able to use my wireless internet connection became really really frustrating including the fact that no internet resource was available on this issue.
After investigating a little, I tried to restore my windows services to the original state. After typing 'windows vista default services' in Google I found a script that supposed to do what I was needed. That site contained also a description for each windows service, so this way I found out about the wireless service that was shut-down, and that couldn't be started because of a missing dependency (that couldn't be started using the windows software (I forgot the name for it .
So looking at the script (the one for defaulting the state of windows services), and finding the name for that dependency that was stopped by that mallware, I did it a try and it worked.
So, funny thing, I'm not a windows fan ("Long live UNIX"), my expertise with windows is fairy limited, and with a little luck I figured out.
Why I was so stubborn? I had to chat with my girlfriend
Funny thing though is that some one stoled my laptop 1 mo later and I lost my girlfriend too )
Regarding the answer to the question if your computer is still infected.... I have no idea....

How to monitor RAC services and nodeapps in Grid Control

Hi,
I have created a number of RAC service names such as GL on a 2-node RAC and would like to use Grid control 10.2.0.2 to monitor the availability of those services and nodeapps. I was not able to find anything in Grid Control that would allow me to configure that. What are being monitored now are the listeners, database instances and nodes. Would it be possible to monitor more than just the RAC listeners, instances and nodes?
thanks.

I don´t think that there is an out-of-the-box metric. However, CRS monitors your services and Grid Control monitors CRS errors. If you need more granular monitoring, I have 2 suggestions:
1) user callouts:
[http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/hafeats.htm#RACAD7133]
2) extending oracle enterprise manager
I have written a paper on how to extend oem at [http://www.ora-solutions.net/web/papers/]
"Extending Oracle Enterprise Manager to collect HP-UX glance data"
You can follow the instructions to build a new target type called "RAC_SERVICE" and add your serivces as targets, e.g. S_BATCH, S_ONLINE, S_HR.
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 2, 2009 10:57 AM
Edited by: mdecker on Jan 2, 2009 10:59 AM

Need help converting imac 2003/2004 model to wireless service???

I have a 2003 or 2004 imac and want to be able to use wireless service. Have purchased a ASUS USB N13 Wireless Adapter. Any knowledge out there on how to go about doing this? Thanks

I have a 2003 or 2004 imac and want to be able to use wireless service. Have purchased a ASUS USB N13 Wireless Adapter. Any knowledge out there on how to go about doing this? Thanks

Transaction Monitor u2013 Services Processes into BI

Hello Experts,
I'm wondering if it is possible to get tickets information from Solution Manager and have some statistics in BI.
For instance the average time of ticket resolution, number of tickets per team/person/month, etc, etc
At this moment Iu2019m using the ZNTP transaction in solution manager to access Transaction Monitor u2013 Services Processes.
I would like to install BI Content to have some summary queries about the activity within ZNTP.
I already connected BI to SMP and also replicated metadata, however the data sources available just by the name donu2019t help me much.
Perhaps I should check the content version within solution manager and BI but I don't know how to performe such verifications.
Thanks

using rsa3 in the source system I'm getting the follow error:
The extraction program does not support object 0CRM_SRV_PROCESS_H
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0CRM_SRV_PROCESS_H.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Can you help me?

Why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data

why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.

ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport

How to monitor Radius services on ACS 5.4

Hi All,
I want to monitor Radius services of ACS 5.4, In case of failure any radius service on ACS.
ACS should send alert to Syslogs or email notification
Is there any way to monitor Radius services ? Anyone have any idea how to monitor.
Regards.

Hi Narinder,
I dont think so there is any particular way you can do that, Because ACS 5.x doesnt have any particluar Radius service.
The services which are available and can be viewed through CLI and GUI are following:
Database
Management (ACS management subsystem)
Ntpd
Runtime (ACS runtime subsystem)
View-alertmanager
View-collector
View-database
View-jobmanager
View-logprocessor
htt https://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-ususer/guide/acsuserguide/viewer_sys_ops.html#pgfId-1052845
Cheers
Minakshi

Google's wireless service is official, dubbed Project Fi (Update: app hits Google Play)

Google's wireless service is official, dubbed Project Fi (Update: app hits Google Play)

There is no harm in having multiple A-V software installations as long as only one is running real-time / on-access detection in the background. That will cause you a lot of slowness as they struggle to scan files simultaneously. It's unlikely that any of them will find anything that isn't already detected by OS X as long as you keep it fully up-to-date, don't disable it's protection and pay attention to alerts they give you.
I have at least six A-V products installed at the moment, but only use them for testing and rarely have one of them running background processes other than updates.

Monitor Wireless services

Similar Messages

Maybe you are looking for