Monitoring availability - Different action for Production/Non-production

Hi there,
We've configured availability monitoring on our central monitoring system using CCMSPING agent. Everything is configured correctly and working nicely. However, I have a problem how to take a different action depending on whether alert was raised for production or non-production system.
I've configured an autoreaction method for MTE class Availability_SysPercent_ABAP. This class is not dependent on the remote system. It is the same for all monitored systems, which is the reason for my problems.
If I assign an autoreaction method to the MTE class, the same method will be called if there is an alert for any of the monitored systems. The autoreaction method automatically logs a new ticket in our call handling system. Unfortunately the call handling system can't parse the email to find out which system was the alert generated for. It can only raise a ticket based on some keywords in the content of the email.
The way we configure CCMS for everything (apart from availability) is that we assign different autoreaction methods to different MTE classes. It can't be done in this case as there is only one MTE class. We can't assign different autoreaction method to individual MT elements as this is lost (see note 660126). One of the options could be to change CCMSPING to generate a different MTE class for production and non-production systems, but I haven't found a way of doing it. Another option was to have 2 CCMSPINGs, but they both use the same MTE class.
Has anyone got any experience with this or can suggest anything we can try?
Thanks,
Rob

Hi,
Its still available.
You can still assign different method to nodes.
Its working fine , we are using.
You can assign different method to different systems in RZ20 itself.
Regards,

Similar Messages

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

New Document Series for different locations for Production Orders

Hi Experts,
I have came across a scenario where we have to setup different Document Series for Different Locations. Actually the Company is having 2 units . First one is the factory itself and the second one is Subcontracting Unit to which the company sends the job work order . But there it wishes to track the productions processes and the Stock tracking Warehouse Wise for
this Second unit also . As Such I have created 2 locations and one warehouse for (RM,SFG,FG) for both the units.
The obvious requirement here is to maintain different Document Series for Productions orders for both the units .
Please guide me about how to overcome this scenario.
Thanks and Regards,
Pooja Singh.

Hi Pooja,
Yes. You can maintain different document series for production Order or any documents depending upon your business scenario. Let's say, you need to maintain Production orderu2019s of job work and sub contracting.
You can define this under Administration>System Initialization> Document numbering.
Select Production orders--> let say Factory first number 1, last number 199999, select current period indicator and update. Similarly for the subcontracting, in the name field, "work order", first number as 110001 or the way you desire, and then the last number.
Reards,
Senthil Maruthappan.

XML Monitor: no interface action for sender or receiver found

Hi,
I am new to XI and currently working on Supplier Network Collaboration ( SNC) to Integrate PO's from ECC to SCM system via XI. I have successfully triggered PORDCR1 message for which I was able to see the XML message in XI. The message is stuck on the Inbound of SCM system ( seen in SMQ2 with error message "Internal error, calling address update without address ID Message no. SR053).
When i double click on Inbound queue (SMQ2) in SCM system it takes me to SXI_Monitor
Below is the log from bottom screen for Trace. Can you please check and see if you could help to resolve the issue?
Thanks,
Tejinder
Below is the Trace bottom screen details
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">http content length 7569</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">Process ID: 27633</Trace>
<Trace level="1" type="T">Work Process ID: 0</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = AM2</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = ALE_SNC</Trace>
<Trace level="1" type="Timestamp">2014-09-10T15:06:15Z CST</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 005056B61D0E1ED48E9F7E70255B98CE</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0005</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0005</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface ReplenishmentOrderNotification_In</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SNC/Global</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace>

Hi Tejinder
Check this link
NO INTERFACE ACTION FOR SENDER OR RECEIVER FOUND
SXMB_MONI: no interface action for sender or receiver found
Error: no interface action for sender or receiver found
no interface action for sender or receiver found - SMQ2 SYSFAIL
Regards
Osman
Message was edited by: Osman Jabri

What are options for applying non-inventory costs to production orders?

We have a non-inventory costs that need to be assigned to product produced on production orders. There are two processes -make-to-order and make-to-stock.
Currently we use activity rates to apply labor and burden costs to our production. We use separate cost centers where needed to ensure that we have sufficient granularity to our activity rates applied.
We have a few specific issues where we need to understand the options for applying costs -
1) We have freight and duty costs related to inbound raw material that we want to assign to our final product. The amount assigned may be either a specific amount (or a specific amount per model), or a % of the total cost on that production order.
2) We have material on the production order bill of material that is called out by quantity and we are using discrete backflush, however we have found there are issues with the accuracy of the quantities. We want to have this product ordered using KANBAN (bin ordering) and have the value relieved from inventory when the bin is issued to production. The cost on the production order is envisioned to be an average amount for the product - or an average amount by model.
3) We want to have a portion of cost for production scrap included in the cost of each product produced. (similar to freight and duty).
In all cases- the amount can change depending on analysis from accounting regarding freight and duty costs (these fluctuate depending on the cost savings we achieve with combined loads and depending on the amount of out of country sourcing), the scrap amount may change periodically depending on the initiatives to reduce scrap on the production floor, etc.
We currently use three activity types, labor, burden and tooling. It is my understanding that there is a limitation in SAP that keeps us limited to 6 activity types.
My questions are:
Are we limited on activity types? these are an option to apply additional costs, but may not be the best option if we want to change the amount applied based on model or apply as a percentage.
Are there other options for applying costs that we can explore? I want to be sure we take into account the various options available before we start down a specific path.
Thank you in advance for your assistance.

As clarification- we are using standard costing for our raw material. We currently accumulate the incoming freight in a balance sheet account. This is treated as part of our inventory. We have considered using an activity type with a activity added to the BOM to apply the cost to the production order. Then we could use the secondarly cost element data to book an entry to relieve the freight account on the balance sheet.
Because we use standard costing- access to see production order variance is critical and must be maintained in any process we select. We also use COPA reporting- so the costing information must be able to flow to COPA for the specific orders/products/serial numbers.
We are doing make to order (production order / sales order specific combination) but also looking at a make to stock process - so the method to apply costs must take both of these configurations into consideration.
Rajneesh - you mentioned that I am limited to 6 activities in a work center- but does that mean I can have more than 6 activity types in SAP but only 6 activities in a work center/cost center combination?
Thank you.

Office 2013 - Excel 2013 - "This action is only valid for products that are currently installed."

I had Office 2010 starter and Outlook 2010 installed. I recently purchased the Office 2013 click to run version (paid monthly subscription) and installed Office 2013. After installing 2013 I noticed that when I opened up Excel files they would
still open in Office 2010. I uninstalled Office Starter 2010 and uninstalled Outlook 2010.
I then manually fixed the file associations for Word, PowerPoint, Publisher and such, however I could not manually fix the Excel file association.
Excel documents show the correct icon however when I double click on them the following error appears "This action is only valid for products that are currently installed."
I have used the Office 2013 repair process, I have uninstalled and reinstalled Office 2013, I have manually uninstalled office 2013 using KB 2739501 (
http://support.microsoft.com/kb/2739501/en-us ) and I still can not open Excel documents.
Recently I found that I can not do mail merges either using Excel documents as the data source and I believe the two items are related.
Any suggestions?

Hi,
Please try to turn off compatibility mode and then check the issue again. To do this, please follow:
1. Open this folder location:
For Windows 32-bit: C:\Program Files\Microsoft Office\Office15
For Windows 64-bit: C:\Program Files (x86)\Microsoft Office\Office15
2. Find Excel.exe, right-click it, and choose Properties.
3. Click on the Compatibility tab and ensure that all of the boxes are
un-checked.
For more information, please refer to this:
http://support.microsoft.com/kb/2674519/en-us
Thanks,
Steve Fan
TechNet Community Support

Different GL accunts during GR for PO and GR for production order

Hi
For posting GR for PO and GR for Production order we use movement 101 only then how we can define or e different GL accounts for both the transactions ?

Hi,
As per my undestanding
If you want to hit different GL for same material type for e.g. GR for PO and GR for Production order.
you can define split valuation, Suppose material A has two Split valuation External Procurement or Inhouse Production.
Now For valuation type External Procurement assign valuation class 1000 and for Inhouse Production 2000.
Now in GBB for valuation modifier BSX assign two separate GL
Like
GBB BSX 1000 120000(External Procurement)
GBB BSX 2000 130000(Inhouse Production)
Solution 2 :-
Define other movement type for Production create and create a new event key and assign GL to that one.
Hope HElp U !
Regards,
Pardeep Malik

User Exit/BADI for Production Order Availability Check

Hi PP experts,
Is there any user exit or BADI which can be used for Production Order Availability Check during order creation/release or while running collective availability check (COMAC) to include additional check conditions such as do not commit quantity (commitment qty = 0) if storage location for a component is missing in the production order due to storage location is not maintained/specified for that component in the material master.
Note: In this case the availability check is set (configured) to check at the storage location level.

Dear ,
Availablity Check is not Plant Specific or Storage Loaction spefic .ATP does not check the stock for any particualar stock in storage loaction rather it cheks various stocks based inward and out ward movement time through PR/PO/Dependent /Planned Order /Stock Type irrespective of any Storage Location .
BAPI which can be used :
1.BAPI_PRODORD_CHECK_MAT_AVAIL
can we exclude materials of prod order in availability check
what is availability check concept how it is used in SAP
Check the above if it is useful
Regards
JH

ITunes 7.0.2 Error - ""This action is only valid for products..." message

Hi,
I see other folk are having problems upgrading to iTunes 7.0.2 but I've had a read of some recent posts and can't find a problem quite like mine...
OK, so I decided to say yes to the "upgrade to iTunes 7.0.2?" prompt when I turned iTunes 7 on this afternoon. I followed all the prompts correctly and allowed the computer to re-start when installation was complete.
My iTunes "i" icon has disappeared from the QuickLaunch bar, and has been replaced by a Windows application blue and white square-window icon. When I click on it to run iTunes I get an error message prompt:
"This action is only valid for products that are currently installed."
I click "OK" and then nothing happens, iTunes (niether 7 nor 7.0.2) does not load and there is no way to get into iTunes. Going through the menu bar results in the same error message.
I am not sure what to do. I don't want to wipe iTunes and start again because I have quite a few purchased tracks that may be lost, and I doubt I would be able to get them back.
Does anybody have any advice?
Many thanks.
(I have tried playing a QuickTime movie file and that works fine).
QuickTime 7.1.3 seems to be working fine.

Remove the shortcut that is in the QuickLaunch bar.
Go to C:\Program Files\iTunes\ and make a new shortcut for iTunes.exe and put it in the QuickLaunch bar.
That should resolve the issue.
Hope this helps,
Nathan C.

HT3924 Can I use my 27"iMac late 2009 as an external display for a non apple product such as a cable box?

Can I use my 27"iMac late 2009 as an external display for a non apple product such as a cable box?

To get TV on your iMac off the cable box you would need to use an external TV tuner device such as the company ElGato is highly regarded for. I have used one of their EyeTV products for many years with my iMac to watch television shows from my Comcasst cable TV box. You can look at the models here:
http://www.elgato.com/elgato/na/mainmenu/products.en.html

How can we change the color of the image for product display for different

Hi All,
How can we change the color of the image for product display for different colors, to be displayed on site.
jeff

Hi priya,
The requirement that you have stated is not a standard feature in ISA CRM. In order to do the same, you will need to modify the standard ISA code in Java. A common path for the solution would be as follows:
1. Colours
    a. Maintain a text type for Color under the object - PCAT_ITM in Customizing.
    b. Modify the standard search of ISA to search within your new text type as well. (In standard it only searches in Description.
   c. Maintain all shirts colour data in the new type created in step a.
   d. Your requirement will be done!
2. Price
a. Use list prices for your shop and assign the appropriate condition type, acces in your catalog.
b. Modify the standard search of ISA to search on the list prices as well.
c. This too will be done!
3. Accessories - This is very tricky, and will require some exploration. However, here's my opinion,
a. Search for the standard function module, which will return the accessories when provided the product as an input.
b. Modify this function module according to your requirement and ensure that it can be accessed remotely.
c. Modify the JSP as in steps 1b and 2b above to call this new remote-enabled function module.
d. Now you're done!!
The ISA modification part is not so simple, you need a really good guy like "Sateesh Chandra" who'll be able to handle your requirements. This is all I could manage, hope it is some help to you!
Thanks & Regards,
Nelson.

Set a different form for a different e-commerce product?

Hi,
I'm new to Business Catalyst, so sorry if this is an obvious question
My client wants to set up registration for a conference on their website. This would be set up as if it was a product on the site (using PayPal standard). The site currently is used for customers to purchase a physical product, and so once they have added it to the cart they are taken to a registration form which asks for their shipping and billing addresses, etc.
This is the same form that customers would currently be directed to after adding the conference registration to their cart. The thing is, my client would like to be able to ask different questions for those registering for the conference- such as dietry needs, etc, which would ideally not be asked when a customer was purchasing a physical product, rather than conference registration.
So my question is, is it possible to redirect users to a different web form, dpending on which product they buy?
Currently the only two solutions I see are first setting up a web form with the questions about dietry requirements, etc, and then redirecting them to the conference 'registration' product (but this would make it more complicated for the user), or else purchasing a seamless gateway such as PayPal Pro, and setting up the conference as different web form
Is there a way to still set up the conference registration as a product, but ask the customer different questions/ have a different form?
Thanks
Sam

I'm pretty sure that there's no way you can change just the Game Center password, but once iOS 8 comes out, you may be able to add him to the Family Sharing App that they're rolling out with iOS 8 and he'll be able to enjoy the game, but it'll prompt you if he goes to buy an in-app purchase. They haven't released a date for iOS 8 but besides the "Coming this Fall" date. That is the only thing i can think of. I put the link at the bottom of my post for the Family Sharing App for iOS 8.
Hope it helps,
broken
https://www.apple.com/ios/ios8/family-sharing/

Exclude stock reserved for production order from availability check

Hi Experts,
We have a problem in the availability check.
There is a material used as selling product and components in the same time.
When the material has been reserved completely for a production order, the new sales order still get confirmed despite there is no physical stock at all!
Please advise how to exclude the stock reserved for production order from the availability check in sales order? Many thanks!
Regards,
Qiang

Go to MM02 and check what availability check is maintained for that material. Next go to OVZ9, select that available check with the combination "A" and maintain "X" or "F" in the field "Incl.production orders".
thanks
G. Lakshmipathi

How to make Different Price for same product in one Sale Order

How can i customizing my system?
I need to sale for different price same product A in one sale order. And price condition type cant be manually. i can separate them by position. for ex. in first position: product A is one price and in 2nd product A with discount. i tried to do it by changing a price group for 2nd position to determinate a discount condition but it generates invoice split.
Someone have any suggestions?

Hi
you can have it automatically determined after some custo and using userexit_pricing_prepare_tkomp in MV45AFZZ and RV60AFZZ.
The idea is to use ítem category field (PSTYV) as a part of pricing data to determine different prices for same material by changing manually ítem category when creating a sales order
- you'll need to create a new ítem category copied from the one you´re using and do all assignments
- add field PSTYV, if not there, to pricing field catalog. This thread has an example on how to and coding required for userexits
http://scn.sap.com/thread/1693234
- Adjust your pricing sequence as per new table
- Maintain specific prices in new table for materials with this new ítem category
Finally, when creating a sales order change, when required, default ítem category by new one to get specific price for material.
Regards,
JM

Material availability check for production order

Hello,
Is there any functional module to check the material availability of production order. So that it can be used in developments.
Regards,
Ganesh

Hi,
Following are the available Function Modules for avaibility checks in Production orders,
BAPI_PRODORD_CHECK_MAT_AVAIL - BAPI: Execute Material Availability Check for Production Orders
And for Process Orders,
BAPI_PROCORD_CHECK_MAT_AVAIL - BAPI: Execute Material Availability Check for Process Orders
Regards,
Dhaval

Monitoring availability - Different action for Production/Non-production

Similar Messages

Maybe you are looking for