Monitoring BI PROCESS CHAIN with Solution Manager BPMON

Hello,
I'm trying to setup the monitoring of BI process chain using the BPMON
I setup the process chain monitoring using BPmon application monitoring "BI Process Chain Monitoring" (BOBIPCMO)
but than I'm not able to read the process chain names,steps,and variant from satellite system
On other systems,using different application monitor (like PI MONITOR) is working fine
i'm using the latest plug-in ST-A/PI 01L_BCO700 on entire landscape
My bi system is 7.01 EHP1 sp4
solution Manager is 7.01 EHP1 SP20
Any suggestiions?
Thanks
Marco

Hello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker

Similar Messages

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
== Checking profile: /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
 with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
 with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key: 10 Pool
 Size configured.....: 642000000 ( 612.3 MB)
 Size min. estimated.: 637597428 ( 608.1 MB)
 Advised Size........: 640000000 ( 610.4 MB)
Key: 40 Pool for database buffers
 Size configured.....: 1048000000 ( 999.4 MB)
 Size min. estimated.: 1468229308 (1400.2 MB)
 Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key: 1 Size: 2500 ( 0.0 MB) System administration
Key: 4 Size: 523648 ( 0.5 MB) statistic area
Key: 7 Size: 14838 ( 0.0 MB) Update task administration
Key: 8 Size: 67108964 ( 64.0 MB) Paging buffer
Key: 9 Size: 134217828 ( 128.0 MB) Roll buffer
Key: 11 Size: 500000 ( 0.5 MB) Factory calender buffer
Key: 12 Size: 6000000 ( 5.7 MB) TemSe Char-Code convert Buf.
Key: 13 Size: 200500000 ( 191.2 MB) Alert Area
Key: 16 Size: 22400 ( 0.0 MB) Semaphore activity monitoring
Key: 17 Size: 2672386 ( 2.5 MB) Roll administration
Key: 30 Size: 37888 ( 0.0 MB) Taskhandler runtime admin.
Key: 31 Size: 4806000 ( 4.6 MB) Dispatcher request queue
Key: 33 Size: 39936000 ( 38.1 MB) Table buffer, part.buffering
Key: 34 Size: 20480000 ( 19.5 MB) Enqueue table
Key: 51 Size: 3200000 ( 3.1 MB) Extended memory admin.
Key: 52 Size: 40000 ( 0.0 MB) Message Server buffer
Key: 54 Size: 20488192 ( 19.5 MB) Export/Import buffer
Key: 55 Size: 8192 ( 0.0 MB) Spool local printer+joblist
Key: 57 Size: 1048576 ( 1.0 MB) Profilparameter in shared mem
Key: 58 Size: 4096 ( 0.0 MB) Enqueue ID for reset
Key: 62 Size: 85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key: 2 Size: 31168040 ( 29.7 MB) Disp. administration tables
Key: 3 Size: 114048000 ( 108.8 MB) Disp. communication areas
Key: 6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key: 14 Size: 28600000 ( 27.3 MB) Presentation buffer
Key: 19 Size: 90000000 ( 85.8 MB) Table-buffer
Key: 42 Size: 13920992 ( 13.3 MB) DB TTAB buffer
Key: 43 Size: 43422392 ( 41.4 MB) DB FTAB buffer
Key: 44 Size: 8606392 ( 8.2 MB) DB IREC buffer
Key: 45 Size: 6558392 ( 6.3 MB) DB short nametab buffer
Key: 46 Size: 20480 ( 0.0 MB) DB sync table
Key: 47 Size: 13313024 ( 12.7 MB) DB CUA buffer
Key: 48 Size: 300000 ( 0.3 MB) Number range buffer
Key: 49 Size: 3309932 ( 3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key: 18 Size: 1792100 ( 1.7 MB) Paging adminitration
Key: 41 Size: 25010000 ( 23.9 MB) DB statistics buffer
Key: 63 Size: 409600 ( 0.4 MB) ICMAN shared memory
Key: 64 Size: 4202496 ( 4.0 MB) Online Text Repository Buf.
Key: 65 Size: 4202496 ( 4.0 MB) Export/Import Shared Memory
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring V01.0
Key: 58900130 Size: 4096 ( 0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....: 73
System-imposed number of shared memories.: 1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB, 99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool: 34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................: 1
Warnings detected................: 9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
 additional CENTRAL system y/[n] ? :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
 CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
 compiled at Jun 28 2010
 systemid 324 (IBM RS/6000 with AIX)
 relno 6400
 patch text patch collection 2010/1, OSS note 1304480
 patchno 335
INFO Runtime:
 running on saptqa01 AIX 3 5 00069A8FD600
 running with profile /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
 alert/MONI_SEGM_SIZE = 200000000
 alert/TRACE = 1
 SAPSYSTEM = 30
 SAPSYSTEMNAME = TQA
 SAPLOCALHOST = saptqa01
 DIR_CCMS = /usr/sap/ccms
 DIR_LOGGING = /usr/sap/TQA/DVEBMGS30/log
 DIR_PERF = /usr/sap/tmp
INFO:
 pid 4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
 segment status ENABLED
 segment started at Tue Sep 14 09:35:56 2010
 segment version 20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
 Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
 Please change configuration with profile parameters
 ipc/shm_psize_01 = -<different pool nr>
 xor
 ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

Solution Monitoring configuration with solution manager 4.0

Hi Friends,
I have to the Solution Monitoring configuration with solution manager 4.0.
Please provide steps or screen shot if any body having that.

Hi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C

SABRIX/JBOSS monitoring with Solution Manager and Wily Introscope

Reading SCN discussions it is not quite clear to me if an extra (Wily) license is needed for monitoring SABRIX/JBOSS with Solution Manager and Wily Introscope. Does someone have experience in this area what exact to do?

Hi GSAP,
Please check this pdf file:
Wily Introscope a CA Product- Utility that Comes with Solution Manager Specifically for Java Monitoring
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50973df5-e1d1-2c10-cf89-c177fbfd7e65?QuickLink=index&…
Thanks
Vikram

How to downloadin Business Process Repository in Solution Manager?

Hello,
Does anybody know how to download whole Business Process Repository from solution manager?
I know how to download BPR, that are related to project, to excel file, but I want to download all the scenarios,processes are inbuilt to the Solution Manager business blueprint.
Can anybody help me?
Thanks,
Mahantesh

Hello Mahantesh,
I suppose that your idea behind this question is that you would like to browse the contents of the BPR. For this specific pupose, SAP will deliver a new web dynpro application with SAP Solution Manager 4.0 SP 12 and the respective stack coming out mid June 2007 which allows you to browse all BPR contents in your SAP Solution Manager system. So you no longer have to create a seperate project and select the contents via F4 value help in SOLAR01 in order to access the contents.
For further updates, please check the news mid June:
<a href="http://service.sap.com/solutionmanager">http://service.sap.com/solutionmanager</a>
Media Library -> Technical Papers. It will probably be called: "4.0 Support Package Stack <latest stack> [probably stack 12]"
However, please note that an individual download of the entire or partial BPR structures into MS Excel will not be possible.
Best regards,
Doreen Baseler

Big Problem With Solution Manager EHP1 ?

Dear all,
I have already installed SAP Solution Manager EHP1, after the installation sucessfuly. I check the function: Project Administration ( T code : Solar_Project_Admin), then select New project button.
The program inform that:
"Runtime Errors: Message Type Unknow
What happened:
Error in ABAP Application program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated because
it has come across a statement that unfortunately cannot be excuted.
etc
Do you know about this problem, what is the errors ?
Thanks all.

Dear all.
With Solution Manager EHP1
SAP Basis: SAPKB7001-SAPKB70016, SAPKB70101-SAPKB70102
SAP ABA: SAPKA7001-SAPK70016, SAPKA70101-SAPKA70102
Detail log as below:
Runtime Errors MESSAGE_TYPE_UNKNOWN
Date and Time 28.04.2009 16:47:15
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"SAPLSPROJECT_SYSTEM_LANDSCAPE" or "LSPROJECT_SYSTEM_LANDSCAPEU28"
"SPROJECT_SYSL_CHECK_CENTRAL_SY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" - in
"SPROJECT_SYSL_CHECK_CENTRAL_SY".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 29
of the (Include) program "LSPROJECT_SYSTEM_LANDSCAPEU28".

SAP CPS Redwood integration with Solution Manager 7.1 SP8

Hi experts,
I need your help..!!
We are planning to integrate SAP CPS Redwood with Solution Manager 7.1 SP8, I have no idea about it, Can you please provide me a step-by-step document, to complete this task?
Regards
Zohaib

hi,
dont have any explicit step by step doc for CPS integration
but refer the source here http://www.sdn.sap.com/irj/sdn/nw-scheduling?rid=/library/uuid/c04021b0-5a4e-2a10-b3a0-eb8f0c799736
some more on SAP Central Process Scheduling by Redwood (CPS)
Thanks
Jansi

Use of CRMD_Order with Solution Manager

When you create a change request through the CRMD_order how do you link it to a business process structure in Solution Manager? Through custom fields? Or are you obligated to start the initiation of a change request within solution manager through issue/message tab in configuration (SOLAR02)?

I do not know if anyone can confirm this , but I finally was able to assign the business scenarios from my business process structure to the solution with the source project.
(For those interested you have to go into transaction DSWP, Select Solution Landscape, go into Solution Landscape Maintenance, select your solution structure on the left side of the screen and get into business scenarios, make sure you are in change mode, then use the download under scenario name to select your scenarios).
When I create an issue and this is what I hope someone can confirm, go into context and add a business scenario, it doesn't show in SOLAR02 under the issues/messages tab.
This is somewhat inconsistent, as when I create an issue out of SOLAR02 it does assign the business scenario automatically and obviously will show in the list. I am not sure why it doesn't show when I create the issue out of DSWP.
Thanks
Paul

BCP Microsoft Platform integration with Solution Manager

Hi
Is it possible to integrate BPC Microsoft platform 7.0 and 7.5 with Solution Manager?
If so how? Is there documentation available explaining the process?

Hi Johan,
There is some level of integration available with Solution Manager. To set up your system for Diagnostics, refer to "End-to-End Root Cause Analysis System Landscape Setup Guide", which is available on Service Marketplace at [https://service.sap.com/sapidb/011000358700000074392009E|https://service.sap.com/sapidb/011000358700000074392009E], and follow the chapters that apply to Planning and Consolidation.
You can also access this document by going to [http://service.sap.com/diagnostics|http://service.sap.com/diagnostics] and selecting the Media Library link under the "More Documentation" section. The document is labeled "SAP Solution Manager Landscape Setup Guide".
Thanks.

MDM Integration with Solution Manager

Hi Gurus,
Can any one explain me the process to Integrate MDM 7.1 with Solution Manager?
Thanks,
Anil

Hi Anil,
documentation is generally available on [Service Market Place|http://service.sap.com/installmdm71]. You might find the How-to Guide Configure the MDM Administration Cockpit helpful.
Best regards
Michael

Process Monitoring: Monitor BI Process Chains

Hello,
does someone know how to monitor Bi process chains in SolMan Process Monitoring? I tried to add the chain CCMS node, but for some reason it does not accept the chain (I guess because it is a dynamic created CCMS context).
Regards,
Frank

Hi,
I will monitor one process with the name
pmd, but 4 processes match on these chracters. How
can i tell SMC that the Process Monitoring shows only
the process who exactly Match the entered value ?Have you tried the extra optional user and/or argument filtering?
If all 4 of your processes run as the same user, with the same arguments (or none at all) then you could also symlink a different file name to the binary you want so it appears in your ps output as something unique. That only works if you have control over what launches that process to begin with (so you can change it to call that new name as well).
If you still can't make that process unique you could also write a small script to monitor it and dump back the interesting bits to stdout to be read by ScriptRunner (http://www.halcyoninc.com/products/ScriptRunner/index.php)
Regards,
[email protected]
http://www.HalcyonInc.com

CCMS is used for system monitoring , why should we use solution manage ?

CCMS is used for system monitoring , why should we use solution manage ?
Whats the relationship between CCMS system and SolMan?
Thank you .

hi,
I just want to ask a question. At our client we have solution manager and CCMS. There is data in CCMS I can extract, it is loading on BW side ok the same number of recs, but the problem on CCMS cubes says there are the same number of record in the cube and also showing as the data is ready for the reporting. But when I run the report and view the data as listcube it is empty.
ANy of you have the situation like this cube say it has the data but when do th BEX or infocube contents the cube is empty nothing in there. The same thing is happening with hourly, 15 minute and daily cubes.
Anyhelp on this matter is appreciated

How to implement system monitoring(IT performance rep) in Solution Manager.

Hi
1.How to implement system monitoring(IT performance report) in Solution Manager?
need to Monitroing *SAP Workload Areas -Total Database time,Total Avg. Response Time,ect..
&SAP Operation System Areas -CPU Utilization* in SM workcenter is it possible?
Please let me know how to configure ?
2. Is it possible to monitor Solman system itself to get system monitoring--this is to test?
regards
Neni

1.How to implement system monitoring(IT performance report) in Solution Manager?
need to Monitroing *SAP Workload Areas -Total Database time,Total Avg. Response Time,ect..
&SAP Operation System Areas -CPU Utilization* in SM workcenter is it possible?
Please let me know how to configure ?
Pls visit the roadmap of solution manager EHP1 -Operation with Solution manager
you get many pdf and sim files for the same.
https://websmp110.sap-ag.de/~sapidb/011000358700006940692005E.sim
2. Is it possible to monitor Solman system itself to get system monitoring--this is to test?
Yes it is possible
visit the above section
Hope solves prb
Regards
Prakhar

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

SMD Configuration on MDM 7.1 with Solution Manager 7.01 SP19

Hi,
Kindly let me know if someone has faced issue with configuring SMD on SMD 7.1 with Solution Manager 7.01 SP19. Presently I have configured that and System is being shown in Wily Introscope Webview but Saposcol is greyed out in that.
Also system is not showing any data in Introscope Dashboard. Any guess for this?
Earlier while I was configuring SMD, error related to null installation directory (...Invalid root directory: /usr/sap/SID/null ) were occuring. After that when I created a softlink for saposcol service from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe.
Still no data and still in SMD Agent logs saposcol service warning is there.
Thanks & Regards,
Manish Singh

Hi Jansi,
Thanks for the reply..
Here is our scenario. SAPOSCOL was not there in /usr/sap/SMD/SMDA97/exe first place. So I made the softlink from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe and than re-ran setup again but still of no use.
Our Soltuion Manager saposcol version and MDM saposcol version is same. Below is the SMD Agent log of MDM server:
Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Error      com.sap.smd.wily.hostagent.config.AgentConfigVO - finalizeDestination(): Initialization failed
[EXCEPTION]
com.sap.smd.wily.hostagent.PermanentException: Error: cannot connect to destination SapHostControl_Default. Probably saphostctrl is not installed. This error can be ignored if saposcol is available.
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:98)
at com.sap.smd.wily.hostagent.config.AgentConfigVO.finalizeDestination(AgentConfigVO.java:85)
at com.sap.smd.wily.hostagent.config.AgentConfigXmlHandler.endElement(AgentConfigXmlHandler.java:174)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:156)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1953)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2442)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1843)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
at com.sap.smd.wily.hostagent.config.AgentConfigParser.parseXml(AgentConfigParser.java:59)
at com.sap.smd.wily.hostagent.SapAgent.loadConfiguration(SapAgent.java:430)
at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:93)
at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
at java.lang.Thread.run(Thread.java:664)
Caused by: javax.xml.rpc.soap.SOAPFaultException: Method 'SOAP-ENV:Envelope' not implemented: method name or namespace not recognized
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:747)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:870)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1451)
at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:142)
at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:157)
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:94)
... 25 more
Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.SapAgent - startActions(): Action SAPOsColWs
[EXCEPTION]
com.sap.smd.wily.hostagent.TransientException: Destination not available:SapHostControl_Default
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlAction.init(SapHostControlAction.java:74)
at com.sap.smd.wily.hostagent.SapAgent.startActions(SapAgent.java:396)
at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:94)
at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
at java.lang.Thread.run(Thread.java:664)
Apr 20, 2011 2:36:20 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): saposcol exited with 255***********************************************************************
This is Saposcol Version COLL 21.01 711 - AIX v12.01 5L-64 bit 090324
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 1552388) is already running .....
Apr 20, 2011 2:36:23 PM [Thread[SAPOsCol,5,main]] Error      com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action throws exception, will be terminated: SAPOsCol
[EXCEPTION]
java.lang.NullPointerException:
at com.sap.smd.wily.hostagent.action.SapOsColAction.reportProperty(SapOsColAction.java:293)
at com.sap.smd.wily.hostagent.action.SapOsColAction.dumpSection(SapOsColAction.java:239)
at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:164)
at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:417)
at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
at java.lang.Thread.run(Thread.java:664)
Our MDM is 7.1 version and Solution Manager is 7.01 (EHP1) with SP19 so we should configure our MDM system as 7.1 version which we did but still data is not coming in Wily properly. Its not showing SID name under the hostname in Wily Introscope and neither is MDM Servers (Master Data Import Server, Master Data Server & Master Data Syndication Server under SID).
Now the interesting thing is that if we configure our MDM server as 5.5 version with Solution Manager and do the configuration than its showing in Wily but in that case MDM Cockpit doesn't work.
We want both to work Wily as welll as MDM Cockpit since our MDM and Solman version matches for both configuration.
Any ides or help steps to do that?
Thanks,
Manish Singh

Monitoring BI PROCESS CHAIN with Solution Manager BPMON

Similar Messages

Maybe you are looking for