Monitoring Messaging with SNMP, anyone?

Hi,
is there anyone (successfully) monitoring his/her Messaging Server through SNMP?
I have 2004Q2 under Solaris 9. I successfully started the Master Agent (.../mps/serverroot/plugins/snmp/magt/magt -p 48472 CONFIG INIT), and an snmpwalk fails when it is stopped (so I am sure no other SNMP deamon is running on the server).
I successfully start subagents following what is written in the SNMP chapter of the Messaging Admin Guide.
An snmpwalk on the public community returns no "JES" MIBs, but only the standard ones.
So, is someone monitoring a JES Messaging server through SNMP? If so, were extra configuration steps necessary?
Thanks

Thanks!
I had everything set-up, but was missing the OID parameter in the snmpwalk query.
For the records, adding "-m ALL" helps snmpwalk to resolve the dotted notation into somewhat meaningful strings, provided MIB files have been installed:
snmpwalk -v 1 -m ALL -c public srvmsg01.csi.it mib-2.27
snmpwalk -v 1 -m ALL -c public srvmsg01.csi.it mib-2.28
("-m ALL" is a quick solution, the single file might be specified for each MIB query, I think)
I am having a look at Big Brother, altought my organization uses MRTG for basic performance monitoring.
Paolo

Similar Messages

  • Would like to monitor teaming with snmp

    Hello,
    I would like to use snmp to monitor the state of teaming/vibe. I can't seem to find much information on the subject in general and none specifically to do with teaming/vibe. Does teaming/vibe have an OID? If not, is there some way I can give it one? It is a java process and I can monitor a process such as java with snmp but I can't differentiate between different java processes such as indexServer and icecore. Any information or links would be appreciated.
    Thanks!
    Toney.

    toneyc,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Monitoring VLANs with SNMP

    Can someone remind me how I can monitor a VLAN other than VLAN 1 with SNMP I think it's something along the lines of public@....
    Any help would be much appreciated.
    Thanks
    Jon

    The @ represents community string indexing. So if you wanted to get snmp output for VLAN 200 you would do something like this:
    snmpwalk -Os -c public@200 -v 2c 10.1.1.1 dot1dTpFdbAddress
    Keep in mind the flags I use above are from my specific snmpwalk utility (net-snmp) but you would add the @ to the comm string and then the value to collect the data

  • Monitoring Cpu with SNMP

    Hello,
    I'am trying to monitor the CPU usage with snmp.
    I found ssCpuRawIdle.0 but each time I do :
    # snmpget -v 2c -c public localhost ssCpuRawIdle.0
    UCD-SNMP-MIB::ssCpuRawIdle.0 = Counter32: 0
    The answer is always 0.
    I think is wrong, there must be value, but I cannot interdstand what.
    snmpd is running and I can obtain answer with other request.
    Thanks in advance fr your help.
    Jacques

    I will add this to my queue of SNMP bugs.
    Incorrect data like this are because OS X looks like FreeBSD to the Net-SNMP project, but OS X has some new APIs/SPIs/KPIs that deprecate or eliminate those used by FreeBSD in an attempt to be a more secure consumer-oriented OS.
    Macs. Lotsa macs. All without SNMP.    

  • Monitoring hardware with SNMP

    I am performing a Systems Admin role for 30 Solaris 10 systems (consisting of 67 Solaris zones and domains) at present.
    My support team colleagues have installed Nagios (an open source SNMP based monitoring software) to enable alerting should any issues occur.
    This works fantastically for our database tables, applications, and even elements such as memory usage, CPU usage, filesystem usage, processes running etc.
    However, what this seems to lack is the ability to detect physical hardware failures.
    For example, over the past month, I have by pure chance (walking past the systems and seeing error lights, or probing the system for training purposes to the other Sys Admin in my team) discovered two hardware failures, which we are not picking up with Nagios.
    These were 1) a hard disk failure - all filesystems on this hard disk were RAID 1 metadevices, so from an filesystem / Nagios POV there was no error.
    2) A PSU failure - there is a redundant PSU in this system, so we did not lose the system, and from a functionality POV we did not have any issues.
    Each of these errors shows up in the messages files, and also in the hardware probes Sys Admins run, such as prtdiag, or cfgadm for the disk, but Nagios failed to detect them.
    So - my question is around whether it is possible to use snmp to query the hardware status on a Solaris 10 system?
    I know SunMC is a monitoring suite which uses SNMP tables to query usage and hardware, so know it should be possible - I am just unable to figure out which tables to query, etc.
    Help, please!

    What we're doing is writing a custom nagios module to scan /var/adm/messages and watch for problems. The hard bit it tuning it so it alerts for real problems and ignores the dross.

  • PRI monitoring problem with SNMP

    Hello
    I'm having some problems with PRI monitoring.
    I'm using cpmDS1ActiveDS0 MIB on a 3800 VoIP gateway with 4 PRI (2x2) (IOS 12.4(4)T1)
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0 - I can see PRI 0/0/0 total number of calls
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1 - I can see PRI 0/0/1 total number of calls
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.0 - Error
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.1 - Error
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0.x - Error
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1.x - Error
    The PRIs that we want to see are 0/1/0 e 0/1/1...... (bad luck!)
    Do I need to make some special configuration on the Router?

    Have you had any responses to this issue ?
    I am running into exactly the same issue and have tried everything I can find to get these individual PRI (count of channels/lines in use) statistics.
    Just for the record, here are some of the SNMP OIDs that I have tried (the ISRs do respond to them, only thing is, the data they send back is mostly rubbish...) the output below is from two separate routers, with different versions of IOS running (which is shown in the sysdescr response):
    Note that the query in red in the second router was responded to with a valid response in the FIRST router...
    All of these OIDs have been suggested at various sites online as useable SNMP OIDs for the ISR, but at other sites, they are suggested to be faulty.  I have found no definitive statement for ways to get these stats successfully on the ISR platform (which amazes me.)  Output below is using net-snmp to collect the stats.
    I welcome any suggestions as to how this can be done reliably for the ISR, and what IOS versions WILL work.  (since I am getting way different reponses to the same OIDs on the two versions below).
    You'll see that for the second (DC) router below, the values are always Zero.
    Yet I can guarantee that the ACTUAL stats are NEVER zero during the time period queried.
    Timestamp: 2010-12-27_13:56:31.73
    C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmActiveDS0s.0
    .1.3.6.1.4.1.9.10.19.1.1.4.0
    C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0
    .1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0
    C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0
    .1.3.6.1.4.1.9.10.19.1.1.3.0
    C:\usr\share\snmp\mibs>snmptranslate -On CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0
    .1.3.6.1.4.1.9.9.63.1.3.3.0
    C:\usr\share\snmp\mibs>snmptranslate -On ISDN-MIB::isdnBearerOperStatus.32
    .1.3.6.1.2.1.10.20.1.2.1.1.2.32
    From ROUTER2 - HQ:
    SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software,
    3800 Software (C3825-ADVIPSERVICESK9-M),
    Version 12.4(15)T8, RELEASE SOFTWARE (fc3)
    CISCO-POP-MGMT-MIB::cpmActiveDS0s.0 = Gauge32: 14
    CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0 = Gauge32: 14
    CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0 = Gauge32: 7
    CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0 = Gauge32: 7 interfaces
    ISDN-MIB::isdnBearerOperStatus.32 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.33 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.34 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.35 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.36 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.37 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.38 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.39 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.40 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.41 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.42 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.43 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.44 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.45 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.46 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.47 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.48 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.49 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.50 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.51 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.52 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.53 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.54 = INTEGER: idle(1)
    From ROUTER2 - DC:
    SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software,
    3800 Software (C3825-ADVIPSERVICESK9-M),
    Version 12.4(18), RELEASE SOFTWARE (fc1)
    CISCO-POP-MGMT-MIB::cpmActiveDS0s.0 = Gauge32: 0
    CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0 = Gauge32: 0
    CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0 = Gauge32: 0
    CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0 = No Such Object available on this agent at this OID
    ISDN-MIB::isdnBearerOperStatus.32 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.33 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.34 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.35 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.36 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.37 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.38 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.39 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.40 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.41 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.42 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.43 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.44 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.45 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.46 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.47 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.48 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.49 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.50 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.51 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.52 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.53 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.54 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.81 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.82 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.83 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.84 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.85 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.86 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.87 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.88 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.89 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.90 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.91 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.92 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.93 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.94 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.95 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.96 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.97 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.98 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.99 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.100 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.101 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.102 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.103 = INTEGER: idle(1)
    Timestamp: 2010-12-27_13:56:35.02

  • Monitor RSSI with SNMP

    I have project where I have 24 Cisco 2602 AP as a wireless bridge. (12 pcs root bridge and 12 pcs of non-root)
    I would like to use "whatsup Gold" to monitor the RSSI on my wireless links.
    I have been told that if information is availeble through SNMP, it is possible to monitor in "Whatsup Gold"
    I'm a little "green" when we're talking snmp.
    Are there someone  that can tell me what information I need from my Cisco access points to monitor the RSSI via SNMP
    Hope there is a friendly auxiliary will help :-) I have project where I have 24 Cisco 2602 AP as a wireless bridge. (12 pcs root bridge and 12 units of non-root)
    I would like to take "whatsup Gold" to overgåge RSSI on my wireless links.
    I have been told that if information is tilgångelige via SNMP, it is possible to monitor in "whatsup"
    I'm a little "green" when we're talking snmp.
    Are there some that can tell me what information I need from my Cisco access points to monitor the RSSI via SNMP
    Hope there is a friendly soul that will help :-)
    /Lars

    Originally Posted by markcasey
    Hi
    I had a problem with my GMS services
    The GroupWise Sync Agent had stopped
    Is it possible to monitor the status of this service using SNMP ??
    Thanks in advance
    Mark
    We use snmp with zenoss and it can for example monitor the status of the ports gms uses.
    Thomas

  • Cisco WCS integration with SNMP based monitoring

    I am looking for a solution to integrate Cisco WCS with any SNMP based monitoring solution.  My requirement is below,
    - Alerts for Access points up/down should be picked up by an alerting system in its console through SNMP.
    - I dont want all access points to be monitored, but only a critical group.
    Currently all access points are configured on LWAP mode under a wireless controller.  Can i configure APs individually for SNMP and get it monitored through the 3rd party monitoring tool.
    Can anyone please guide me to find a solution for this.

    http://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch2_CAS.html

  • Since upgrading to 10.7.2 to use iCloud, i keep getting a message with ubd wants to use the login keychain, anyone for help to how to get rid of this...

    since upgrading to 10.7.2 to use iCloud, i keep getting a window message with ubd wants to use the login keychain, i put the right password but it keeps coming back, anyone for help to how to get rid of this...

    This is what I did and it seems to have worked so far. While that little annoying box is up you need to open the Keychain access by:
    going to applications -> open utilities folder -> click to open Keychain Access
    Now here is the stupid part, you have to continue to press the cancel button on the "ubd wants to use login keychain" box for the kaychain window to open. Once you have keychain access open go to:
    the top of your monitor and select "Keychain Access" right next to the little apple logo -> click preferences in the options panel-> the preference box will open now -> click "Reset My Default Keychain" -> another box will pop up that says "Please enter your login password. This password will be used to create your new keychain" (of course this is assuming that you use a login password to access your mac) -> enter your login password and a box shows up that says "created a new empty 'Login' keychain"
    After that you should be good to go. This new keychain you created with your login password overides the old keychain. The old keychain is still available in the Keychain's folder but is not being used and therefor can be deleted. All you have to do now is press ok, and your good. If the "ubd wants to use login keychain" box is still there after you reset your keychains just hit cancel and it should be gone for good or you can enter your login password.
    Is this a fixall that will work forever? I have no idea but doing this has allowed me to access my network at work and all the servers I need to get to.
    Oh and one more thing. You may need to press cancel on the ubd box throughout this entire process, I just gon in the habit of clicking a button hitting cancel on the ubd box and the new window would pop up.
    I hope this helps you! Sorry if it's long, I was trying to be as detailed as possible to make it  easier. Let me know how it goes.

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly.  I have uninstalled/reinstalled evernote but it still doesn't work.  Anyone know where evernote stores their files on a Mac/

    I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it.  I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work.  Anyone know where evernote stores their files on a Mac?  Or had this problem.

    Are there any dialog boxes popping up behind your Yahoo screen?
    I have intermittent problems attaching files in Yahoo mail and this is usually the reason.  I'm also using an iMac (10.7.3) and this is likely the problem.
    It is generally a Yahoo issue rather than a Mac problem.

  • Cannot open Contact Sheet II on my Elements 12, gives me error message. Can anyone help with this?

    In Elements 12, I cannot open Contact Sheet II. I keep getting an error message.  Can anyone help with this?

    That's a different file.
    Try this:
    1. Click on your desktop
    2. Then in the Go menu click on Go To Folder
    3. Paste the following line in the Go To Folder dialog and press Go
    ~/Library/Preferences/Adobe/Plugins/Adobe Contact Sheet II PSE12/Elements
    4. That should open a finder window something like below.
       Drag the Adobe Contact Sheet PSE12 Prefs to the Trash on the dock
    5. Start the pse 12 editor and see the contact sheet II works.

  • TS3510 Can't receive emails or messages with FaceTime can anyone help please thanks

    Can't receive emails or messages with FaceTime can anyone help please thanks

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
     Cheers, Tom

  • Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

    Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

    Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you.  TanishaS1_VZW Follow us on Twitter @VZWSupport  If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for

  • Failed to Run OLE Excel program in background JOB (SM36)

    Please help. I have write a program to use OLE to create a Excel file. The program can run successful in front end workstation. However, when I run the program in background job by SM36. The statement "CREATE OBJECT EXCEL 'EXCEL.APPLICATION'" return

  • Cannot save to this filename

    I am a newer user, to CS4, and recently when I try to save my work (to the same filename) I get this error message: "Cannot save to this filename. Please save the document with a different name or in a different folder".  It is very inconvenient to h

  • Safari randomly crashing OSX 10.5.8 PPC

    I've tried repeatedly to solve this including installing other browsers- which crash too- so I think its a java or flashplayer issue.  But I'm no expert, looking for help in solving. Thanks for any help! Crash report: Process:         Safari [172] Pa

  • ITunes Canada Question

    I'm unable to buy apps for my 32gb iPod touch due to iTunes not accepting gift cards for them. I'm currently living abroad for some time before I head back to Canada and don't have a Canadian Credit Card to buy the apps. My uncle is visiting in 2 wee

  • Problem on Business Components

    Hi, i repost this problem because i didn't succeed on resolev it. See below : Business Components: Unable to find referenced object Object: easyges.commercial.eos.affaires. Owner: easyges.eos.GdaDemandeAffectationPFk1Assoc2 BC Project: easyges.view.V