Monitoring VLANs with SNMP

Can someone remind me how I can monitor a VLAN other than VLAN 1 with SNMP I think it's something along the lines of public@....
Any help would be much appreciated.
Thanks
Jon

The @ represents community string indexing. So if you wanted to get snmp output for VLAN 200 you would do something like this:
snmpwalk -Os -c public@200 -v 2c 10.1.1.1 dot1dTpFdbAddress
Keep in mind the flags I use above are from my specific snmpwalk utility (net-snmp) but you would add the @ to the comm string and then the value to collect the data

Similar Messages

  • Would like to monitor teaming with snmp

    Hello,
    I would like to use snmp to monitor the state of teaming/vibe. I can't seem to find much information on the subject in general and none specifically to do with teaming/vibe. Does teaming/vibe have an OID? If not, is there some way I can give it one? It is a java process and I can monitor a process such as java with snmp but I can't differentiate between different java processes such as indexServer and icecore. Any information or links would be appreciated.
    Thanks!
    Toney.

    toneyc,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Monitoring Cpu with SNMP

    Hello,
    I'am trying to monitor the CPU usage with snmp.
    I found ssCpuRawIdle.0 but each time I do :
    # snmpget -v 2c -c public localhost ssCpuRawIdle.0
    UCD-SNMP-MIB::ssCpuRawIdle.0 = Counter32: 0
    The answer is always 0.
    I think is wrong, there must be value, but I cannot interdstand what.
    snmpd is running and I can obtain answer with other request.
    Thanks in advance fr your help.
    Jacques

    I will add this to my queue of SNMP bugs.
    Incorrect data like this are because OS X looks like FreeBSD to the Net-SNMP project, but OS X has some new APIs/SPIs/KPIs that deprecate or eliminate those used by FreeBSD in an attempt to be a more secure consumer-oriented OS.
    Macs. Lotsa macs. All without SNMP.    

  • PRI monitoring problem with SNMP

    Hello
    I'm having some problems with PRI monitoring.
    I'm using cpmDS1ActiveDS0 MIB on a 3800 VoIP gateway with 4 PRI (2x2) (IOS 12.4(4)T1)
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0 - I can see PRI 0/0/0 total number of calls
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1 - I can see PRI 0/0/1 total number of calls
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.0 - Error
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.1 - Error
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0.x - Error
    1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.1.x - Error
    The PRIs that we want to see are 0/1/0 e 0/1/1...... (bad luck!)
    Do I need to make some special configuration on the Router?

    Have you had any responses to this issue ?
    I am running into exactly the same issue and have tried everything I can find to get these individual PRI (count of channels/lines in use) statistics.
    Just for the record, here are some of the SNMP OIDs that I have tried (the ISRs do respond to them, only thing is, the data they send back is mostly rubbish...) the output below is from two separate routers, with different versions of IOS running (which is shown in the sysdescr response):
    Note that the query in red in the second router was responded to with a valid response in the FIRST router...
    All of these OIDs have been suggested at various sites online as useable SNMP OIDs for the ISR, but at other sites, they are suggested to be faulty.  I have found no definitive statement for ways to get these stats successfully on the ISR platform (which amazes me.)  Output below is using net-snmp to collect the stats.
    I welcome any suggestions as to how this can be done reliably for the ISR, and what IOS versions WILL work.  (since I am getting way different reponses to the same OIDs on the two versions below).
    You'll see that for the second (DC) router below, the values are always Zero.
    Yet I can guarantee that the ACTUAL stats are NEVER zero during the time period queried.
    Timestamp: 2010-12-27_13:56:31.73
    C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmActiveDS0s.0
    .1.3.6.1.4.1.9.10.19.1.1.4.0
    C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0
    .1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0
    C:\usr\share\snmp\mibs>snmptranslate -On CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0
    .1.3.6.1.4.1.9.10.19.1.1.3.0
    C:\usr\share\snmp\mibs>snmptranslate -On CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0
    .1.3.6.1.4.1.9.9.63.1.3.3.0
    C:\usr\share\snmp\mibs>snmptranslate -On ISDN-MIB::isdnBearerOperStatus.32
    .1.3.6.1.2.1.10.20.1.2.1.1.2.32
    From ROUTER2 - HQ:
    SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software,
    3800 Software (C3825-ADVIPSERVICESK9-M),
    Version 12.4(15)T8, RELEASE SOFTWARE (fc3)
    CISCO-POP-MGMT-MIB::cpmActiveDS0s.0 = Gauge32: 14
    CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0 = Gauge32: 14
    CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0 = Gauge32: 7
    CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0 = Gauge32: 7 interfaces
    ISDN-MIB::isdnBearerOperStatus.32 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.33 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.34 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.35 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.36 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.37 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.38 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.39 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.40 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.41 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.42 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.43 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.44 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.45 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.46 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.47 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.48 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.49 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.50 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.51 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.52 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.53 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.54 = INTEGER: idle(1)
    From ROUTER2 - DC:
    SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software,
    3800 Software (C3825-ADVIPSERVICESK9-M),
    Version 12.4(18), RELEASE SOFTWARE (fc1)
    CISCO-POP-MGMT-MIB::cpmActiveDS0s.0 = Gauge32: 0
    CISCO-POP-MGMT-MIB::cpmDS1ActiveDS0s.0.0 = Gauge32: 0
    CISCO-POP-MGMT-MIB::cpmISDNCfgBChannelsInUse.0 = Gauge32: 0
    CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0s.0 = No Such Object available on this agent at this OID
    ISDN-MIB::isdnBearerOperStatus.32 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.33 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.34 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.35 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.36 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.37 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.38 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.39 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.40 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.41 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.42 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.43 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.44 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.45 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.46 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.47 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.48 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.49 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.50 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.51 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.52 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.53 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.54 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.81 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.82 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.83 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.84 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.85 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.86 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.87 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.88 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.89 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.90 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.91 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.92 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.93 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.94 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.95 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.96 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.97 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.98 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.99 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.100 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.101 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.102 = INTEGER: idle(1)
    ISDN-MIB::isdnBearerOperStatus.103 = INTEGER: idle(1)
    Timestamp: 2010-12-27_13:56:35.02

  • Monitoring hardware with SNMP

    I am performing a Systems Admin role for 30 Solaris 10 systems (consisting of 67 Solaris zones and domains) at present.
    My support team colleagues have installed Nagios (an open source SNMP based monitoring software) to enable alerting should any issues occur.
    This works fantastically for our database tables, applications, and even elements such as memory usage, CPU usage, filesystem usage, processes running etc.
    However, what this seems to lack is the ability to detect physical hardware failures.
    For example, over the past month, I have by pure chance (walking past the systems and seeing error lights, or probing the system for training purposes to the other Sys Admin in my team) discovered two hardware failures, which we are not picking up with Nagios.
    These were 1) a hard disk failure - all filesystems on this hard disk were RAID 1 metadevices, so from an filesystem / Nagios POV there was no error.
    2) A PSU failure - there is a redundant PSU in this system, so we did not lose the system, and from a functionality POV we did not have any issues.
    Each of these errors shows up in the messages files, and also in the hardware probes Sys Admins run, such as prtdiag, or cfgadm for the disk, but Nagios failed to detect them.
    So - my question is around whether it is possible to use snmp to query the hardware status on a Solaris 10 system?
    I know SunMC is a monitoring suite which uses SNMP tables to query usage and hardware, so know it should be possible - I am just unable to figure out which tables to query, etc.
    Help, please!

    What we're doing is writing a custom nagios module to scan /var/adm/messages and watch for problems. The hard bit it tuning it so it alerts for real problems and ignores the dross.

  • Monitor RSSI with SNMP

    I have project where I have 24 Cisco 2602 AP as a wireless bridge. (12 pcs root bridge and 12 pcs of non-root)
    I would like to use "whatsup Gold" to monitor the RSSI on my wireless links.
    I have been told that if information is availeble through SNMP, it is possible to monitor in "Whatsup Gold"
    I'm a little "green" when we're talking snmp.
    Are there someone  that can tell me what information I need from my Cisco access points to monitor the RSSI via SNMP
    Hope there is a friendly auxiliary will help :-) I have project where I have 24 Cisco 2602 AP as a wireless bridge. (12 pcs root bridge and 12 units of non-root)
    I would like to take "whatsup Gold" to overgåge RSSI on my wireless links.
    I have been told that if information is tilgångelige via SNMP, it is possible to monitor in "whatsup"
    I'm a little "green" when we're talking snmp.
    Are there some that can tell me what information I need from my Cisco access points to monitor the RSSI via SNMP
    Hope there is a friendly soul that will help :-)
    /Lars

    Originally Posted by markcasey
    Hi
    I had a problem with my GMS services
    The GroupWise Sync Agent had stopped
    Is it possible to monitor the status of this service using SNMP ??
    Thanks in advance
    Mark
    We use snmp with zenoss and it can for example monitor the status of the ports gms uses.
    Thomas

  • Monitoring Messaging with SNMP, anyone?

    Hi,
    is there anyone (successfully) monitoring his/her Messaging Server through SNMP?
    I have 2004Q2 under Solaris 9. I successfully started the Master Agent (.../mps/serverroot/plugins/snmp/magt/magt -p 48472 CONFIG INIT), and an snmpwalk fails when it is stopped (so I am sure no other SNMP deamon is running on the server).
    I successfully start subagents following what is written in the SNMP chapter of the Messaging Admin Guide.
    An snmpwalk on the public community returns no "JES" MIBs, but only the standard ones.
    So, is someone monitoring a JES Messaging server through SNMP? If so, were extra configuration steps necessary?
    Thanks

    Thanks!
    I had everything set-up, but was missing the OID parameter in the snmpwalk query.
    For the records, adding "-m ALL" helps snmpwalk to resolve the dotted notation into somewhat meaningful strings, provided MIB files have been installed:
    snmpwalk -v 1 -m ALL -c public srvmsg01.csi.it mib-2.27
    snmpwalk -v 1 -m ALL -c public srvmsg01.csi.it mib-2.28
    ("-m ALL" is a quick solution, the single file might be specified for each MIB query, I think)
    I am having a look at Big Brother, altought my organization uses MRTG for basic performance monitoring.
    Paolo

  • Monitoring the Cisco ACE module with SNMP

    We use 2 redundant Cisco ACE loadbalancer in our datacenter
    The models are ACE20-MOD-K9 with software A2(2.0)
    Does anybod know how to monitor the environment (cpu, memory) of such a module with snmp?
    We were not able to find an applicable MIB for that module.
    The CISCO-PROCESS-MIB.oid (ftp://ftp.cisco.com/pub/mibs/oid/CISCO-PROCESS-MIB.oid) seems not to reflect the correct oid's.
    What are the correct oid's for cpu and memory?
    Where can I find a detailed documentation for snmp-monitoring the cisco ace module?
    thanks

    Hi Patrik,
    to monitor the ACE I use these two MIB's:
    ftp://ftp.cisco.com/pub/mibs/v2/CISCO-SLB-MIB.my
    ftp://ftp.cisco.com/pub/mibs/v2/CISCO-ENHANCED-SLB-MIB.my
    Example for CPU:
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Normale Tabelle";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    cpmCPUTotalEntry 1.3.6.1.4.1.9.9.109.1.1.1.1
    The resource usage and other interesting things you will find with a MIB browser.
    Achim

  • Monitor with SNMP

    Hello,
    we would like to monitor client connection by webapp with SNMP.
    How can i make this?
    Wich OID ?
    THKS in adv.

    Start here:
    http://edocs.bea.com/wls/docs81/snmpman/index.html
    And then here:
    http://edocs.bea.com/wls/docs81/snmp/index.html
    ~Ryan Upton
    pasbien wrote:
    Hello,
    we would like to monitor client connection by webapp with SNMP.
    How can i make this?
    Wich OID ?
    THKS in adv.

  • How to monitor VLAN trffic

    I want to Monitor Vlan traffic
    some of our equipment is not supported SNMP.
    so all our customer gateway is defined in NoC L3 swith
    as a differnt VLAN
    when ever we try to take MRTG from L3 it shows vlan traffic is 100bits/sec but this customer is geetiing 2 MB/sec
    how can we monitor any idea or help

    As far as I'm aware (at least on the layer 3 switches I've dealt with) you can't get per-VLAN throughput statistics by monitoring SVIs/VLAN interfaces.
    If you want per-VLAN stats (assuming you're trunking multiple VLANs over a single interface and want the stats for one VLAN) you may be able to poll the CISCO-CLASS-BASED-QOS-MIB if you're using policies on your physical interfaces.
    I haven't found another way to obtain per-VLAN stats - I'd be happy to be corrected.
    Of course it may be viable in your situation (depending on the connectivity) to simply monitor the physical ports to which customer routers are attached. (or maybe not, hence your VLAN question)

  • Using JConsole in combination with SNMP

    I have created a simple agent (using version 5 JDK) to handle an MBean. Within this agent I have created two adapters; an HTML and SNMP adapter. The HTML adapter is working fine via the browser (i can execute the operations on the MBean).
    Question is; Can I use JConsole to connect to the SNMP adapter?; if not how then?
    Code:
    public void addSnmpAdapter(int port)
                   throws Exception {
              // Register and start the SNMP adapter
              SnmpAdaptorServer snmpAdapter = new SnmpAdaptorServer();
              ObjectName snmpAdapterName = new ObjectName(
                        "MBeanAgent:name=snmpadapter,type=SNMP,port=" + port);
              snmpAdapter.setPort(port);
              mbs.registerMBean(snmpAdapter, snmpAdapterName);
              snmpAdapter.start();
              System.out.println("SnmpAdapter on port " + port);
         }Start command:
    java -Dcom.sun.management.jmxremote -Dcom.sun.management.snmp.acl=false -Dcom.sun.management.snmp.port=162 MBeanAgent

    Hi Willem,
    No you cannot use JConsole to "connect to the SNMP adapter".
    JConsole is a JMX Console, not an SNMP console.
    What are you trying to do with that SNMP Adaptor anyway?
    If you use Java DMK to start an SNMP adapter, and do nothing more,
    the adaptor will show you nothing. It is empty. You still need to
    generate, implement, and add at least one SNMP MIB to the adaptor.
    For more information on this, see the Java DMK documentation.
    http://java.sun.com/products/jdmk/jdmk_docs.html
    Java SE 5.0 has a built-in SNMP agent that can be started using System
    properties on the Java command line. This agent implements a single MIB,
    the JVM-MANAGEMENT-MIB, that exposes the JVM Management and Monitoring
    data through SNMP.
    See here for more info on the JVM SNMP Agent:
    What is the JVM SNMP Agent?
    http://blogs.sun.com/jmxetc/entry/what_is_the_jvm_snmp
    See also here for a discussion of using SNMP versus JMX to monitor your JVMs.
    JVM Monitoring: JMX or SNMP?
    http://blogs.sun.com/jmxetc/entry/jmx_vs_snmp
    Hope this helps,
    -- daniel
    JMX, SNMP, Java, etc...
    http://blogs.sun.com/jmxetc

  • LMS 4.0.1 and User tracking with SNMP v3

    Hi! (again )
    I've another problem with our new LMS 4.0.1.
    We manage our devices with SNMP v3 but the user tracking don't want to work flawlessly.
    I've attached an example from our SNMP configuration. Basicly it's the same in our devices.
    1st the problem was that no matter what I did the User tracking didn't want to find any host. I left it and worked on something else. After 2 weeks suddenly appeard couple of thousand end host.
    As earlier (LMS 2.6 or 3.2 with snmp v2) it is the same that LMS cannot differentiate normal end host and IP Phones although we have several thousand from both. But this is only one problem.
    The other is that there are switches with the same IOS and SNMP configuration and from one I get the UT data and from another one I didn't get anything. Only from some 4506 (aprox. 12-15) and 6506 (2) works and we have 20+ 4506 and 10+ 6506. Not to mention the other switches (couple of houndred 2960 and 3750).
    I'll be grateful if somebody could advice what to do.
    Thanks
    Gabor

    Understanding Debugger Utility
    The utility displays a report on the reasons why User Tracking failed to discover end hosts on specific ports.
    In many cases, User Tracking may not perform as expected. This may be  because of problems in other LMS applications. For instance LMS Server  may have devices that are not discovered or inadequate VLAN discovery in  Topology Services.
    You can run the utility to troubleshoot problems, or provide the report  and log generated by the utility when you contact TAC for help in  diagnosing problems.
    The debugger utility uses the data collected by LMS Server and reports the reasons for the missing ports in User Tracking.
    This tool also has an SNMP component embedded which runs an SNMP query  for the table as a part of verification for SNMP failure. For example,  SNMP bugs in Catalyst operating system because of which User Tracking  may fail to discover devices.
    This generates an Action Report that you can use to analyze the data.
    The Debugger Utility:
    1. Checks the switch ports in a sequential order.
    2. Reports violation of basic rules for each of the missing ports such as link ports and trunk ports.
    3. Checks for SNMP retrieval of data, if the ports pass the validity check.
    4. Generates an Action Report suggesting possible remedial actions to retrieve the valid missing ports.
    Using Debugger Utility
    The Debugger Utility is available at $NMSROOT/campus/bin/ (where $NMSROOT is the directory where you have installed CiscoWorks).
    To run the Debugger Utility, run the command:
    utdebug -switch switch-ip -port port1[,port2 ...] [-export filename]
    where,
    switch is the switch to which the end hosts are connected.
    ports are the ports on the switch which have missing end hosts User Tracking.
    -export filename specifies  that the debug messages be stored in the file specified. If this option  is not used, the messages are displayed on the console.
    For example,
    utdebug -switch 10.29.6.12 -port 5/12
    utdebug -switch 10.29.100.10 -port Fa0/10
    utdebug -switch 10.29.6.14 -port Gi6
    Pretty sure you will find this and perhaps more in the build in help of LMS
    Cheers,
    Michel

  • UPS monitoring support with Cisco Prime Infrastructure 1.2

    Dear Members,
    Good day,
    I am having a project implemented wherein i have the UPS power redudancy solution for our network devices.
    Now can anyone gide that is it possible for below :-
    UPS units installed with SNMP cards be monitored via Cisco Prime Infrastructure 1.2 as our monitoring & management solution is Cisco Prime Infrastructure 1.2 ?
    if yes
    Can you guide if following action would be possible to export the below logs from UPS unit to our Cisco Prime Infrastructure 1.2
       a) UPS fault status information
       b) UPS operational status(input power available Y/N)
       c) Battery fault status
       d) Battery charging current
       e) Battery charge level
       f) Output current
    Conclusion is we need to confirm that would it be posible to achieve remote monitoring of these UPS units via our CPI 1.2
    Thanks in Advance for your support & replies to this query.
    Regards,
    Muzammil N.

    Prime Infrastructure 1.2 can manage non-Cisco devices in a limited fashion via SNMP query and trap processing. It cannot import logs and does not have a generic syslog server,
    So if your devices have snmp read only support and can generate SNMP traps for the above you can add them to PI. Follow the manual add device procedure here.

  • Monitoring JMX with What's Up Gold v11

    I'm not a Java developer but work with a lot of them (I am in IT, not dev). We use What's Up Gold to monitor our servers and applications. We would like to monitor our Java application with What's Up Gold. This includes monitoring Java and Tomcat.
    Any help would be appreciated!
    We've not been able to even get simple SNMP monitoring going. Would like something more like the JConsole within What's Up Gold.
    Thanks,
    Chris

    Hi,
    I am not too sure about how you could possibly plug any of this in "What's Up Gold" as I don't
    know this product, but the apache site has some doc about monitoring Tomcat with JMX, using
    a JMX ant task on the client side.
    http://tomcat.apache.org/tomcat-5.5-doc/monitoring.html
    I have also written some example to show how to get at the JVM information using java, or jruby..
    See:
    http://blogs.sun.com/jmxetc/entry/a_small_program_that_prints
    http://blogs.sun.com/jmxetc/entry/how_to_retrieve_jvm_information
    http://blogs.sun.com/jmxetc/entry/how_to_retrieve_remote_jvm
    Hope this helps,
    -- daniel
    http://blogs.sun.com/jmxetc

  • Monitoring VLAN traffic

    I moved from 2500 series routers to a switched network using a Catalyst 3750 and 3560 switches over the course of the last year. In my routed network I used MRTG to monitor traffic on my interfaces. In my switched network environment I have not been able to find a free or low cost tool that will monitor VLAN traffic. Any suggestions?

    I have the same problem and found these links that provided answers:
    http://forums.cacti.net/about29656.html&highlight=
    http://www.experts-exchange.com/Hardware/Networking_Hardware/Switches/Q_23738165.html
    Vlans on 3560s, 3750s and 3550s do not show stats.  The packets are forwarded with the ASIC chips and do not cross the CPU for actual processing.  To actually see the traffic you will need to turn off CEF, which decrases the performance significantly (not recommended, see links above).

Maybe you are looking for