Monthly Cost Forecast In SAP PS

Hello All
Is it possible to show monthly cost forecast in SAP PS?
If yes can you please explain how to do it,
Thanks & Regards
Shailesh

Hi,
For Forecast, view Report S_ALR_87013540. On leftside click on Period/Year.
For Plan & Actual cost for each month, view reports S_ALR_87100186 & S_ALR_87100185
Regards,
Kabir

Similar Messages

  • 12 Months rolling forecast with prev. 4 month actuals - Integrated Planning

    Hi,
    What is the best practice for setting up a 12 month rolling planning with -4 months of actuals and +12 months of forecast with IP?
    Let's think about a very basic setup, Cost Center planning:
    - We have 2 infoproviders (for act/plan) and they are combined as a multiprovider and that is used on the aggregation level.
    In the planning layout/query:
    - On the lines Cost Elements are shown
    - On the columns periods and keyfigures are shown.
    The requirement is that actuals are shown for 4 previous months and planning is open & visible for the current month +11 months. We do not wish to show any actuals beside the figures for planning NOR old planned values beside the actuals for the previous months.
    Versioning works as follows: Zero version is always open for planning and snapshots are loaded into different versions at a given point in time. Actuals are also loaded as version 0.
    Value types are as usual: actual = 10, Plan = 20 and we use 0FISCPER for periods.
    So the result should be that we'll show 16 periods for each line (cost element) with the 4 first columns as static cells displaying only actuals and the 12 latter as input ready cells open for planning.
    All tips leading to workable solution are rewarded!
    -Miikka

    Hi
    Miikka Åkerman  
    how are you set 4 first columns as static cells displaying only actuals and the 12 latter as input ready cells open for planning.?
    and how about you designer cube that is include what characterices and key figure
    you said
    In the planning layout/query:
    - On the lines Cost Elements are shown
    - On the columns periods and keyfigures are shown.
    this periods is set as a keyfigures?
    Now I am face the same problem
    how to  set 4 first columns as static cells displaying only  and how to set the 12 latter as input ready cells open for planning.?
    if periods is move to next periods
    how to rolling this plan ??
    hope you can help me
    thanks a million

  • CJ9L, calculation of cost forecast plan

    Hi,
    Prerequisites: Plan work 260 hours. Constraints on start and finish date. Distribution rule is equal to distribution according to factory calender. For scenario 2) actual work is 100 hours. Remaining work is 160 hours. Duration of activity is 1 year.
    Scenario 1) When calculating project cost forecast without any actual cost from time reporting, the cost forecast is distributed over the remaining duration of the activity.
    Scenario 2) When calculating project cost forecast with actual cost from time reporting, the cost forecast is planned on the same period as the forecast report is run. We would like this to be done in the same way as in scenario 1 above and distributed according to the factory calendar and not have all of the remaining cost on the last period of the activity.
    If someone out there has experience of this issue, we appeciate your advice.
    Best Regards ,
    Ioannis

    Hi Ioannis,
    Please see the online document
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c2/1ad778462611d2b4310060
    94b9c9be/content.htm                                                    
    to see how the internal-processed activity should work in CJ9L.
    I do think, the described scenario 2 do not work in that way because the factors you described.  As far as I remember, the following factors are relevant for such case.
    1. If the activity is paritally confirmed. What are the actual finish and forecast finish (or remaining duration).
    2. Is the forecast work maintained.
    3. What is the key date of CJ9L.
    Generally there is no logic just to put the remaining costs in the last period, but it can happend that based on the factors above, which uses the last period as remaining time frame.
    Kind regards,
    Zhenbo

  • How much would be the monthly cost to host a small Linux instance in Azure?

    Hello Guys,
    I just wanted to ask how much would be the monthly cost of hosting a Small instance of Linux VM in Azure.  I doubt this
    detail has all the pricing parameters included. It’s just the VM itself it seems.
    I know there is a pricing calculator but I’m not sure what parameters would be involved for this very basic instance. If you guys can give me an example calculation or at least point me to the basic parameters to include in the calculation, I will really appreciate
    it.
    FYI – these instances will be running a FreePBX system. I hope this helps to point out which parameters should be considered and included in the calculation.
    Thank you very much,
    Arnel

    Hi Noctis0791,
    Thanks for your feedback. As far as I know, Azure didn't support Provisioned IOPS. You could submit the feature request on custom wish (http://feedback.windowsazure.com/forums/217298-storage/suggestions/4900829-provisioned-iops
    And about billing question, I suggest you could contact azure billing support team to get more detail.
    Channel:
    Please contact support team by creating a support ticket at http://www.windowsazure.com/en-us/support/contact/
    Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
    http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
    Please try it.
    Thanks
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What is the monthly cost to add an addittional smartphone?

    My daughter would like a phone for Christmas. We are attempting to determine what the additional monthly costs would be to add a additional smartphone to our plan (above and beyond the initial costs for the phone itself).

    That would depend on the plan and the way you purchase the phone.  More Everything - $40 line access, discounted for EDGE payment plan, or no contract purchase (full price) based on total data bucket.  $9.99 line fee and $30 for 2gb data if you are on the old Nationwide plan and want to stay there. 
    Basically $40 added to your monthly bill for the additional line and data...with a [possible discount based on other factors.

  • Costs Involved with SAP Netweaver PI 7.1?

    Hi SAP Experts,
    Just wanted to ask if there are any transaction based costs for the SAP Netweaver PI 7.1? 
    For example, data is sent to PI -> PI sends data to 3rd party software (and vice-versa).
    Would there be a transaction costfor the scenario above?  Thank you in advance for your help.
    Regards,
    Paul

    Hi,
    If I'm not mistaken, with PI you have to pay for messages sent to a non SAP system.
    I know that we do pay for our B2C Rosettanet messages.
    But each customer will have a different contract...
    Regards,
    Olivier

  • 12 months rolling forecast

    I am trying to write a calc script that should be able to do 12 months rolling forecast in one of our cubes.
    The months are the fourth gen of dimension "Period", "Year" has FY07, FY08, FY09.... in it and the "Scenario" has projection, budget, forecast, actual, etc.
    Can someone please help me out and tell me what do I have to write in my script to be able to do the forecasting.
    Thanks in advance,
    Bobby

    1) put 0fiscper in the heading but your variables for the dynamic columns need to be set to the right type of text heading for that or you set it to characteristic value.
    2) I could not get quarterly totals as
    P1 P2 P3 Q1 P4 P5 P6 Q2 etc since the dynamic columns does not allow for BPS totals on quarterly in BPS layout definition but I use local Excel formula in layout definition in that at the last page of the layout definition, I count out 12 columns in the heading to figure out where the monthly amounts P12 ends and the following 4 columns I set up 4 Excel formula totals for sum(p1column:p3column), sum(p4column:p6column) etc.  I tend to put the annual total after the 4 quarterly totals and specify the excel formulas as sum(p1column:p12column).  If you want it even nicer since you don't know the number of rows of data, you would actually have something like:
    IF(ISBLANK(A4),"",SUM(C4:E4))
    Hope this helps,
    Mary
    Hope this helps.

  • HT204053 what is the monthly cost of using icloud

    What is the monthly cost of using icloud on your iphone or pc

    kzin69 wrote:
    What is the monthly cost of using icloud on your iphone or pc
    None... iCloud is Free...  >  http://www.apple.com/icloud/
    https://discussions.apple.com/message/17292613#17292613

  • Cost Sheet from SAP

    Dear All,
    I am consulting with Cement Industry client, here we have only one Final Product i.e., Cement. We implemented SAP FI and CO module 2 yrs back but till now they are not using Controlling module properly in SAP. Now they need total costing from SAP, mainly Cost Sheet as per Indian cement industrys format. We are following repetetive manufacturing process, by using Product Cost Collectors. Can any body explain what to check for getting Cost Sheet and useful T.codes please.
    Regards,
    Prasad

    The process in SAP costing is you set a standard cost estimate for a material (say Cement bag) and release it to the material master. The cost estimate shall be with quantity structure (i.e with a Bill of material and routing). This will serve as the standard for all production during the year (or any period you decide). To do this you need to set up a costing variant T-code OKKN)
    You also need to design a cost component structure created OKTZ to capture various cost element that would be involved in representing the cost of making the cement bag. This can be tailored to suit the format regulated by the industry.
    For e.g
    Raw materials to include powder of alumina, silica, lime, iron oxide, and magnesium oxide)
    Conversion (kiln operations cost)
    Pulverizing
    Depreciation (of kiln etc)
    Labour cost
    Packaging etc.
    Once you have assigned, you can run the cost estimate through CK40N collectively or cK11N individually.
    Cost sheet or costing sheet within SAP is a terminology used to allocate overheads to products. You can also use this feature (found under SPRO>Controlling>PCP>Basic settings>Overheads) This feature will ensure to transfer cost from cost centers to the products on any preferred basis.

  • Cost forecast and project stock

    Dear all,
    in our setup, we are using non valuated project stock. However, the 1st project to buy a component has to pay for it. Therefore, we activated the "Planification" flag in the network type (OPSC).
    As a consequence, planned costs from network orders append the WBS element planned costs but not the assigned values.
    We would like now to use cost forecast. It means we have to assign values which is exactly what we disabled by our previous config.
    We are looking for a way to raise assigned values and roll up planned costs for project stock materials.
    I tried to have a look in the Item Category setup but so far, I did not find anything.
    Would anyone have an idea?
    Thanks,
    Thibault

    Hi
    thank you for your reply.
    OPUV and OPSV are already configured as per your details.
    However, we needed to tick the "Planification" in OPSC in order to have planned cost for Project Stock materials.
    We are using non valuated project stock and it's the only way we found to roll up planned costs for those materials...

  • What is the monthly cost of apple tv

    I want to know what the monthly costs of apple tv are

    Some information in this article and video "might" be useful in your question
    Apple TV
    Per Apple policy, we want you to know we might benefit from your visit to our free information or even profit.
    We hope you find the information and video(s) useful.

  • Delete a Cost Forecast version

    All,
    I have a CO 'Cost Forecast' version in a development client. It is only flagged for 'Plan'.
    It has been used for project forecasting (cj9l).
    I want to delete the version. How do I delete the dependent entries before I could delete the version itself?
    Appreciate your help.
    thanks, Mathavan
    Edited by: T.P.R. Mathavan on Apr 22, 2010 4:01 PM

    therefore donot varry about the CE, it is okay latest one is valid for your production
    i hope you got the point.
    reward amd close the thread or come with the question

  • How to upload forecast into sap.

    how to upload forecast into sap.

    Hi
    You can use MD61 - create planned independent requirements or MM17 - Mass Maintenance
    Thanks !
    E.Avudaiappan

  • How to accomplish Revenue and Cost forecasting in Oracle?

    We are implementing Oracle Rel 11.5.10. and have a specific business requirement for Revenue and Cost Forecasting.
    We have Projects integrated with OM using custom extensions (We are not using Project Manufacturing). Revenue is based on scheduled shipment dates and Cost is based on PO Promise Dates. Both Revenue and Cost are forecasted for 2 quarters and are rolled up on revenue category level. When Scheduled shipment date changes it is required to automatically forecast the revenue in the period scheduled ship date falls into. We understand that out of the box functionality does not support roll up of forecast at revenue category level which leads to displaying budgets, commitments and atuals in different lines. Has any one done this in any of there client engagements? Can anyone explain how Revenue and Cost forecasting is done in a High tech Network Equipment manufacturer which usies Projects.
    Any help will be highly appreciated.
    Thanks in advance
    Amit

    Hi
    My understanding is that your entire solution is based on custom proceses.
    You might have a program that reads the scheduled shipment date from OM and generate budget lines for revenue.
    You might have a program that reads the PO Promise date from Purchasing, and generate budget lines for costs.
    You could integrate those sources and generate a new version of forecast every time you need to update your plans in Oracle Projects.
    Dina

  • Uploading External Forecast to SAP

    Hi.
    I'm trying to identify what's the best way to upload external forecast to SAP. My customers are using FORECAST program and I don't know if they have the forecast in this tools what i'm going to do with this information.
    I was thinking to put it into MD61, creating LSF then execute DRP process. My problem is that I don't know if my LSF requirements will desappear..I don't think so.
    Someboday can help me, what's the best way to upload external forecast and where is it?
    Thanks in advance.
    Diego

    Hi,
    The best way to load your external forecasts to PIR using MD61 transactions.
    Regards,
    V. Suresh

Maybe you are looking for