MOPatch error OUI-67074 on Solaris

I'm new to Oracle so bear with me.
I'm trying to patch 11.2.0.3 with the latest Oracle patch bundle from SAP (SBP_112032_201207). I'm using the latest version of OPatch from Oracle and the latest MOPatch from SAP.
So I run the mopatch command and it fails on 1 of 70, but does install a bunch of them. The failure is on package 14079778. I see the following at the end of the log file:
UtilSession: Backup area for restore has been cleaned up. For a complete list of files/directories
deleted, Please refer log file.
[Jul 25, 2012 7:27:15 AM] [ Error during Prerequisite for apply phase ] Detail: OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckPatchApplyDependents" failed.
[Jul 25, 2012 7:27:15 AM] OUI-67035:System is intact, OPatch will not restore the system
[Jul 25, 2012 7:27:15 AM] Finishing ApplySession at Wed Jul 25 07:27:15 EDT 2012
[Jul 25, 2012 7:27:15 AM] Total time spent waiting for user-input is 0 seconds. Finish at Wed Jul 25 07:27:15 EDT 2012
[Jul 25, 2012 7:27:15 AM] Log file location: /oracle/SM2/112_64/cfgtoollogs/opatch/14079778_Jul_25_2012_07_27_04/apply2012-07-25_07-27-04AM_1.log
[Jul 25, 2012 7:27:15 AM] Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckPatchApplyDependents" failed.
[Jul 25, 2012 7:27:15 AM] StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:6420)
[Jul 25, 2012 7:27:15 AM] StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3856)
[Jul 25, 2012 7:27:15 AM] StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5932)
[Jul 25, 2012 7:27:15 AM] StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:2063)
[Jul 25, 2012 7:27:15 AM] StackTrace: oracle.opatch.OPatch.main(OPatch.java:583)
Can anyone tell me how I should begin to troubleshoot this? I've verified that no *ora processes are running...
THanks.

I should add that there is another log file for package 13343438 which has the following error in it.
OUI-67135:Argument(s) Error... Illegal file format for composite patch. There is no composite.xml file. Either this composite patch is not packaged properly, or you are applying a constituent individually.
[Jul 25, 2012 7:27:03 AM] Please check the arguments and try again.
Is the SBP corrupt??

Similar Messages

Error OUI-25031 - default installation

All day Im trying to install Oracle 10g Release 2 (10.2) for Solaris 10 (x86).
Each time it finishes with error: OUI-25031.
Its going to be just a default installation. I did it many times ago but never had this problem.
The log file is telling nothing to me. It complains about Enterprise Manager Grid which I dont wont to install.
Does anyone know what is the problem with it ?

I have downloaded it on MAY previous year.
I believe the link is this, as the size of the file is exactly this same: http://www.oracle.com/technetwork/database/10202solx86soft-089512.html
Although I need to correct entry on my above post: file size on the UFS partition is: 681,090,961 bytes
The document I refer to is: database\doc\relnotes.102\b15696.pdf (inside of the 10202_database_solx86.zip)
Here is last 50 lines on installActions2011-01-08_09-56-02PM.log
# An error report file has been saved as hs_err_pid6915.log.
# Please refer to the file for further information.
Command = /oracle/product/10.2.0/db_2/jdk/jre//bin/java has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /oracle/product/10.2.0/db_2
Configuration directory is set to /oracle/product/10.2.0/db_2/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Created a new file /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands
INFO: Since the option is to overwrite the existing /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Since the option is to overwrite the existing /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands.bak.1
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: The OUICA command is launched from /oracle/product/10.2.0/db_2/oui/bin/ouica.sh.
WARNING:
The following configuration scripts need to be executed as the "root" user.
#!/bin/sh
#Root script to run
/oracle/product/10.2.0/db_2/root.sh
To execute the configuration scripts:
    1. Open a terminal window
    2. Log in as "root"
    3. Run the scripts
    4. Return to this window and click "OK" to continue
*** Starting OUICA ***
Oracle Home set to /oracle/product/10.2.0/db_2
Configuration directory is set to /oracle/product/10.2.0/db_2/cfgtoollogs. All xml files under the directory will be processedEdited by: user639256 on Jan 9, 2011 4:06 AM
Edited by: user639256 on Jan 9, 2011 4:09 AM

"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Error: OUI.exe Stopped Working 11g R2 32-bit Client on Win 7 64-bit

I am receiving an error "oui.exe stopped working" when running setup.exe to install Oracle 11g R2 (win32_11gR2_client.zip for Win 32-bit) client on Windows 7 Enterprise 64-bit. I never even get as far as the Oracle installation dialog box. I am trying to install 11g R2 32-bit because it is my understanding the 64-bit version of Oracle client is not compatible with Toad for Oracle.
I have read numerous posts on the subject and have tried just about everything I can think of to get around the error. When I run the setup.exe -debug I can see that teh files are unzipped and the installer seems to fail when it hit the section where it tries executing java.exe. Once the dialog box appears with the error message, I am not able to get back to the command window to extract the debug results. I can only see it partially in the background behind the dialog box. When I hit cancel to close the error dialog, the debug window also closes, so no way to get the details of the debug results
I am logged into Win 7 as a member of the Adminstrators group and have verified that the Windows User Access Control (UAC) is turned off. I get the erorr message whether I run as Administrator or not. I have unzipped all the files and folders under the \client directory from the zip file to a folder c:\temp\. So the setup.exe and all folders below it are in the c:\temp directory. I did this because one post suggested an issue with long path names or path names with spaces when executing setup.exe.
Seems like it should not be this difficult. I never had issues in the past installing Oracle client on Windows XP Pro. This is my first attempt at installing under Win 7.
Any help or direction would be much appreciated.
Edited by: user10421280 on Nov 21, 2011 1:27 PM

orafad and PavanG,
First let me thank you both for your multiple attempts to help me. I finally figured out what was causing the issue with the Oracle Installer, oui.exe not running properly. Last night I was looking around into the Windows Event Viewer and found an Error entry for oui.exe that pointed to a program directory and .dll in the \\program files\appsense\ directory path. It seems that in addition to the McAfee virus scan, host intrusion, unwanted programs, group policy manager, etc., there is another application installed on the machine that governs what programs can and cannot run. I don't know much about it other than when the program was temporarily suspended, the setup.exe and oui.exe install kicked off fine without the "oui.exe stopped working" error message. It proceeded happily to the Oracle Client installation dialog. All along our IT desktop support was trying to help me with the install and they repeatedly disabled the McAfee programs to no avail, but not the other utilities. It was almost like even they were unaware of this other application running in the background since they never suggested disabling it.
Either way, I'm happy to say that I am now able to successfully launch the Oracle Client installer without issue. I've also learned a little about getting the Oracle 11g Instant client to work with Toad while I worked through the issue with the installer. I could almost get by completely with just using the Instant Client if I didn't have to use SQL*Loader (sqlldr.exe) and tnsping.exe. Any suggestions for getting these two functions to work with the Instant Client would be appreciated. I tried copying the binaries and the message files into the appropriate instant client directories, but windows kept complaining about missing .dll's when I tried executing the commands.
If there is no workaround for getting these functions to work with the Instant Client, and I have to do an Oracle Client install, at least now I can. Do you know if I would need to do the full "Administrator" install to get these functions, or can I do just the "Run Time" install to get sqlldr and tnsping?
Thanks again for your help

Grid Control 11g R1 installation error OUI-10133

Hello All,
I'm installing Oracle Enterprise Manager 11g Release 1 on SUSE Linux 10 x86_64. Here I'm facing an error *"OUI-10133:Invalid staging area. There are no top level components for Linux available for Installation in this staging area."*. Installation packages were downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unzipped. Someone in internet said these zip files should be extracted in one directory. But I see some folders exist in all three unzipped folders are same but contain different files. If I put them in one directory they would be overwrote. What should I do? Please suggest. Thanks in advance.
Best Regards,
Guangming Duan

864397 wrote:
Hello All,
I'm installing Oracle Enterprise Manager 11g Release 1 on SUSE Linux 10 x86_64. Here I'm facing an error *"OUI-10133:Invalid staging area. There are no top level components for Linux available for Installation in this staging area."*. Installation packages were downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unzipped. Someone in internet said these zip files should be extracted in one directory. But I see some folders exist in all three unzipped folders are same but contain different files. If I put them in one directory they would be overwrote. What should I do? Please suggest. Thanks in advance.
Best Regards,
Guangming DuanHello Guangming,
You need to unzip all files into a same directory. Don't worry about folders. Unzip tool will extract the files into the correct folders (will not overwrite the content of the folder).
Regards
Gokhan

Error: OUI cannot be launched

Hi,
Try to install 9i patch, update 9i to 9.2.0.4 after installing 9i. Patch was copied from other server.
$cd /tech/oracle/Oracle_9i_Software/Patch/Disk1
$./runInstaller -ignoreSysPrereqs -invPtrLoc /var/opt/oracle/oraInst.loc
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8 or 5.9. Actual 5.10
Failed <<<<
Ignoring required pre-requisite failures. Continuing...
Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will make it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
what is wrong...?
Thanks
Jerry
Edited by: jerrygreat on Jul 24, 2009 11:00 AM

jerrygreat wrote:
Thanks
acturally , it is same
$/tech/oracle/Oracle_9i_Software/Patch/Disk1/runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8 or 5.9. Actual 5.10
Failed <<<<
Ignoring required pre-requisite failures. Continuing...
Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will make it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
Regards,
Edited by: jerrygreat on Jul 24, 2009 11:22 AMOK, so you are using a full path spec to launch the copy of runInstaller located at /tech/oracle/Oracle_9i_Software/Patch/Disk1, but what is your "current working directory" at the time you execute this command? Show us:
$> pwd

ERROR: OUI files not found at their expected location. while cloning 11.5.9

Dear Friends,
Getting error when cloning 11.5.9 from PROD to DEV:
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
I applied the patch 5035661 also but still the error exists.
Please let me know the fix.
[appldev@betestoracle bin]$ perl adcfgclone.pl appsTier
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
Enter the values for the new APPL_TOP Context:
Does the target system have more than one application tier server node (y/n) [n] ?:
Is the target system APPL_TOP divided into multiple mount points (y/n) [n] ?:
Target system APPL_TOP mount point [apps/applprod/prodappl]:/apps/DEV/devappl
Target system COMMON_TOP directory [apps/applprod/prodcomn]:/apps/DEV/devcomn
Location of JDK 1.3.1 on the target system [usr/java/jdk1.3.1_10]:
The new context file has to contain port numbers related to target system.
Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:n
Clone Context uses the same port pool mechanism as the Rapid Install
Once you choose a port pool, Clone Context will validate the port availability.
Enter the port pool number:[0-99]
50
Checking the port pool 50
done: Port Pool 50 is free
Web Listener port is 8050
Complete port information available at /apps/DEV/devappl/admin/out/PROD_betestoracle/portpool.lst
Backing up /apps/DEV/devappl/admin/PROD_betestoracle.xml to /apps/DEV/devappl/admin/PROD_betestoracle.xml7.bak
Creating the new APPL_TOP Context file from :
/apps/DEV/devappl/ad/11.5.0/admin/template/adxmlctx.tmp
The new APPL_TOP context file has been created :
/apps/DEV/devappl/admin/PROD_betestoracle.xml
Log file located at /tmp/CloneContext_05131045.log
Please enter the APPS password:
apps
Running Rapid Clone with command:
perl ./adclone.pl java=/apps/DEV/devcomn/util/jre/1.1.8 mode=apply stage=/apps/DEV/devcomn/clone component=appsTier method=CUSTOM appctxtg=/apps/DEV/devappl/admin/PROD_betestoracle.xml
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
Starting application Services for PROD:
Running:
/apps/DEV/devcomn/admin/scripts/PROD_betestoracle/adstrtal.sh APPS/<appspwd>
Regards,
DB

ERROR: OUI files not found at their expected location.Please see these docs.
Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1] -- adcfgclone.pl appsTier fails with "ERROR: OUI files not found at their expected location"
Preclone DBtier Fails: Error: Oui Files Not Found [ID 739589.1]
Troubleshooting Guide and Known Issues List for the Oracle Application Management Pack for Oracle E-Business Suite [ID 812294.1]
Application Management Pack for Oracle E-Business Suite Release 2.0.x Troubleshooting Guide [ID 412044.1]
Thanks,
Hussein

Error: Couldn't open solaris/machines/conf003.rc

Hi:
Installing Solaris 8 Intel is a total nighmare. What a great difference with Red Hat 6.1 (which is practically plug&play)
After following all the installation steps over a complatible hardware intel platform (AMD k6, Samsung Ultra Ata 10gb, no network card), the configuration assistant stops in the first boot showing the following:
Running Configuration Assistant
error: Couldn't open solaris/machines/conf003.rc
The root filesystem is not mounted and the configuration assistant has exited prematurely. Booting is unlikely to succeed. CTL-ALT-DEL may be used to reset the machine.
Well, can anyone tell me what is going on? I can see the blue screen at the begining and i have 2 partitions (boot and solaris). I boot from the boot partition of course. AARRRGHHHHHH�� I NEED SOME HELP GUYS, i know i am a newby :-)

The missing file solaris/machines/conf003.rc seems to hint at a
corrupted saved configuration on the diskette. (You should find
three files conf003.{nam,rc,rf} in the solaris/machines subdirectory
on the DCA diskette). Using a fresh DCA
diskette might indeed help.
Another option is to try to install directly from cdrom - ignoring the
DCA floppy. If your
system can boot from the cdrom drive, try to boot using the
"Software 1 of 2" CD (or the "Installation" CD).

ERROR: OUI-10180:Invalid Operating System group name specified. em12c instl

Hi All,
I am doing a silent install of EM12C, I have downloaded the 2 zip files from e-delivery.
The installation is done as ora3010 user whose group id is ems3010. On the same machine I have installed 11.2.0.2 with the same ora user ora3010 and group ems3010 for EM repos.
Now when I try to do the silent install of EM12C with the command
<EM_DUMP>/runInstaller -silent -responseFile $CONFIG_HOME/software_only.rsp -invPtrLoc $HOME/Middleware/oraInst.loc -waitForCompletion
with the contents of "software_only.rsp" file like below
RESPONSEFILE_VERSION=2.2.1.0.0
UNIX_GROUP_NAME=ems3010
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
DECLINE_SECURITY_UPDATES=true
INSTALL_UPDATES_SELECTION="skip"
ORACLE_MIDDLEWARE_HOME_LOCATION=/slot/ems3010/oracle/Middleware
FROM_LOCATION="../oms/Disk1/stage/products.xml"
DEINSTALL_LIST={"oracle.sysman.top.oms","12.1.0.1.0"}
b_upgrade=false
EM_INSTALL_TYPE="NOSEED"
CONFIGURATION_TYPE="LATER"
TOPLEVEL_COMPONENT={"oracle.sysman.top.oms","12.1.0.1.0"}
I get this error
ERROR: OUI-10180:Invalid Operating System group name specified.
As you can see the UNIX_GROUP_NAME is set to proper group id ems3010
-bash-3.2$ id ora3010
uid=60103010(ora3010) gid=60403010(ems3010) groups=60403010(ems3010)
Please Help.

Thanks Asheoran.
However the issue was with my Ora Inventory file OraInst.loc. I had actually installed 11.2.0.2 database on the same machine and as same user, and for that db I had a different OraInst.loc file. When I give the same OraInst.loc file for the EM install too, the error goes away. It seems we just need to have one Inventory file for both installations.

10g Universal Installer kernel errors while installing on Solaris 5.10

Hi all,
I have been trying to install Oracle 10g on a Solaris 5.10 machine (32-bit) as per the official Oracle Documentation for a couple of days now. It seems that the Universal Installer fails it's pre-installation steps and throws up error at the following kernel parameters:
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
I have followed the Oracle Documentation which says to change the kernel parameters using the resource control facility. For this I already have a project "oracle" which the user "oracle" has been assigned to:
$ id -ap oracle
uid=100(oracle) gid=100(oinstall) groups=100(oinstall),101(dba) projid=100(oracle)
Following are the snapshots from the prctl command on the current state of the kernel paramters:
For Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
$ prctl -n project.max-shm-memory -i project oracle
project: 100: oracle
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 254MB - deny -
system 16.0EB max deny -
The Oracle recommended value is 4GB - I expect Universal Installer check to fail for this, so I change the parameter using the resource control facility by logging in as root in a new terminal and keeping one oracle session active.
# prctl -n project.max-shm-memory -v 4gb -r -i project oracle
I can see that the parameter has been set correctly when I do:
$ prctl -n project.max-shm-memory -i project oracle
project: 100: oracle
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 4.00GB - deny -
system 16.0EB max deny -
For Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
$ prctl -n project.max-sem-ids -i project oracle
project: 100: oracle
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-sem-ids
privileged 128 - deny -
system 16.8M max deny -
The Oracle recommended value is 100 - I do not expect Universal Installer check to fail at this parameter
For Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
$ prctl -n project.max-shm-ids -i project oracle
project: 100: oracle
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-ids
privileged 128 - deny -
system 16.8M max deny -
The Oracle recommended value is 100 - I do not expect Universal Installer check to fail at this parameter
Also when I try to issue the command:
$ prctl -n project.max-sem-nsems -i project oracle
I get:
prctl: failed to get resource control for project.max-sem-nsems: Invalid argument
Oracle recommends I should set a value of 256.
After setting up all this I still get the following errors from Universal Installer:
Checking for shmsys:shminfo_shmmax=4294967295; found no entry. Failed <<<<
Checking for shmsys:shminfo_shmmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmni=100; found no entry. Failed <<<<
Checking for semsys:seminfo_semmsl=256; found no entry. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Now when I modify the kernel settings by editing the /etc/system file without even a reboot I'm can see all my Universal Installer Kernel checks as passed.
Not sure if I'm missing out some crucial step while setting up the kernel parameter using the resource control facility?
~ Somjit

It is bug in OUI.
OUI is looking at /etc/system to check the kernel parameter settings, but this file is not used (by default) in Solaris 10
It should check the kernel parameter settings using the prctl.
Check metalink note 363436.1
workaround is to
./runInstaller -ignoreSysPrereqs
or as You already did, change /etc/system as well.

Error while creating a Solaris Resource

I got the following error while creating the following solaris resource:
Test connection failed for resource(s):
Solaris: Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "_,)#+(:".\n
I have the sudo permissions for the following commands:
(ALL) NOPASSWD: /usr/bin/auths, /usr/sbin/groupadd, /usr/sbin/groupdel, /usr/sbin/groupmod, /usr/bin/last, /usr/bin/listusers, /usr/bin/logins, /usr/bin/passwd, /usr/bin/profiles, /usr/bin/roles, /usr/sbin/useradd, /usr/sbin/userdel, /usr/sbin/usermod, /usr/bin/ypmatch, /usr/bin/ypcat, /usr/bin/ypasswd, /usr/bin/awk, /usr/bin/cat, /usr/bin/chmod, /usr/bin/chown, /usr/bin/cp, /usr/bin/cut, /usr/bin/diff, /usr/bin/echo, /usr/bin/grep, /usr/bin/ls, /usr/bin/mv, /usr/bin/rm, /usr/bin/sleep, /usr/bin/sort, /usr/bin/tail, /usr/bin/touch, /usr/bin/which
Please let me know what could be the problem?

This doesn't look like a Sun Directory Server issue. You may want to post this to another forum.
Regards,
Ludovic.

Error while installing on Solaris 10

Hi
i am getting following error while installing weblogic server10.3.1 on Solaris 10.
+Installation fails with Fatal error encoutered during self-extraction. Click Yes to exit, No to continue as a Net installation.[No space left on device] message.+
I tried redirecting it to new local temp folder but it didn't helped.
Please help.
Thanks
Chinmay
Edited by: user12143775 on Nov 13, 2009 8:53 AM

Hi Vijay
I can see a constarint on / and /dev directory.Rest Of directory has a lot of available space.Can this cause the problem.
Filesystem size used avail capacity Mounted on
/ 2.0G 1.6G 371M 82% /
/dev 2.0G 1.6G 371M 82% /dev
/lib 59G 8.3G 50G 15% /lib
/platform 59G 8.3G 50G 15% /platform
/sbin 59G 8.3G 50G 15% /sbin
/usr 59G 8.3G 50G 15% /usr
/usr/local 30G 2.3G 26G 8% /usr/local
/usr/openv 6.0G 3.1G 2.8G 53% /usr/openv
proc 0K 0K 0K 0% /proc
ctfs 0K 0K 0K 0% /system/contract
mnttab 0K 0K 0K 0% /etc/mnttab
objfs 0K 0K 0K 0% /system/object
swap 102G 392K 102G 1% /etc/svc/volatile
/platform/SUNW,T5240/lib/libc_psr/libc_psr_hwcap2.so.1
59G 8.3G 50G 15% /platform/sun4v/lib/libc_psr.so.1
/platform/SUNW,T5240/lib/sparcv9/libc_psr/libc_psr_hwcap2.so.1
59G 8.3G 50G 15% /platform/sun4v/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
swap 102G 48K 102G 1% /tmp
swap 102G 48K 102G 1% /var/run
3.24.144.10:/vol/preprovis_88
25G 972M 24G 4% /u01
Thanks
Chinmay

Install Errors for 9i on Solaris 9

I am installing Oracle 9i Solaris 9 and the install went well until the Oracle Database Configuration Assistant. It failed with the following errors:
Oracle Database Configuration Assistant Errors for install
ORA-27303
ORA-27146
ORA-27300
ORA-27301
ORA-27302
Can someone enlighten me as to what these mean?
Message was edited by:
d072330

For all of those newbies like me I forgot to set some system settings. Here are the system settings I needed to put into /etc/system:
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=3000
set semsys:seminfo_semmsl= 256
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=200
set shmsys:shminfo_shmseg=20

Error installing SOA in Solaris 10 x86 VM

I am trying to install SOA 11.1.1.2.0 on Solaris 10 x86 VM machine. When the runInstaller is invoked from Disk1, i get the following error and the installer quits. Any clues?
-bash-3.00$ ./runInstaller
./runInstaller: /export/home/oracle/ofm_soa_generic_11/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected

Can you try with jreLoc parameter -
./runInstaller -jreLoc <path of JRE 1.6>
You may refer -
SOA Suite Installation
Regards,
Anuj

Error Generating Chart on Solaris

We're running OBIEE 10.1.3.2.1 on Solaris 10 and receive the following error when creating charts:
Error Generating Chart
An error occurred during execution of "send". Broken pipe [Socket:16]
Error Details
Error Codes: ETI2U8FA During install we used JDK1.5.0_07, I've now installed JDK1.6.0_01 and changed the instanceconfig.xml file so it points to the new JDK1.6.0_01 environment. After restarting the presentation service (run-saw.sh), the error still exists.
Does anyone know what might be the issue? Do I've to change the JDK-version also on other locations?
Michael

Solved by changing the common.sh in the <OracleBI>/setup directory, this file holds the JAVA_HOME-path. After editing restart the run-sa.sh and run-saw.sh.
Michael

MOPatch error OUI-67074 on Solaris

Similar Messages

Maybe you are looking for