More than 1 smtp server for out going mail

I am working off-site and need to send email from my Mail accounts. I am also connecting wireless. I can receive mail but cannot send.
Can I have more than one smtp server for an account?
Or do I need a separate account for this situation?

i had the same problem, i changed port# from 25 to 587, i think it was, & sent e again,it won't send it so i change back to 25 & send then it worked. In mail under help on menu bar it said i.s.p's sometimes shut down port 25 for junk mail reason's,so it could be temporary.

Similar Messages

SMTP+Iron port out going mail issue

Hi,
One of the EBiz instance is configured with Iron port SMTP server for outgoing workflow mails.
Th IRONPOrt mails are relayed using round robin technique.
From the EBiz server OS if i fire mails the mails mails are relying using the round robin technique but from Oracle if i am firing some test mails all of them are relying though only smtp server where the scenario should be both the Iron port server should fire mails in a round robin fashion.
Just want to know if there is anything from Ebiz notification mails side we need to take care.
Ajay

Outgoing mail shouldn't be using port 993, that's an incoming mail port (IMAPS). Outgoing should be using either port 25, 587, or in some cases, 465.

How do I add more than 1 picture to an e-mail???

Hi,
I'm a new Mac user... I was just wondering if there was a way to select more than 1 picture for an e-mail. When I'm using iPhoto, it will only allow me to select 1 picture and then click the e-mail button.. If I press "shift" and "click", then it highlights all the photos in between the 2 pictures I clicked.. Can I just select a few random ones from here and there?
Thanks!

To select more than one non-contiguous photo use the cmnd key (the one with the Apple on it), and then click on the photos you want.

Time Warner/RoadRunner out-going mail server

Has RR got there out-going mail working correctly yet..........Im still using cwmx.com
Thanks

I hit problems with this - this afternoon. I couldn't send while at a Caribou Coffee this afternoon. I kept getting the "can not find outgoing server" message. I remembered you referencing port 25 vs 587 so I went in and switched the port TO 25 then my e-mails went without a problem for the rest of the afternoon.
Just out of curiosity - what's the difference in the ports?

How do I change out going mail server

How do I change out going mail server

Go to
Settings
Mail, Calendars, Contacts,
Tap on the account you want to change
and go to Outgoing Mail Server
Please note that there are email accounts for which you cannot adjust those settings

Why is Mail asking me for the name of an smtp server for an email address that doesn't exist?

I've migrated from Snow Leopard to Mountain Lion on a new Mac, but in trying to use Mail on ML, it keeps asking me for the name of an smtp server for an email address that's never existed. The addy has my user name correct, but the server part of the address doesn't exist, or at least I've never used an email address with that provider. On ML there's no plist file for Mail, so nothing to delete there. What else can I do to get Mail working? The only other option I have is to abandon Mail as being crippled and useless, and use Postbox, which for it's price (US$9.95) is an attractive option. OTOH, I've paid for Mail after all, so it really ought to work. Any clues as to what I can do to stop its nonsensical behaviour? How do I file a bug report?
TIA.
Pauline

Amasis wrote:
On ML there's no plist file for Mail, so nothing to delete there.
~/Library/Containers/com.apple.mail/Container.plist
(Go to your Finder "Go" menu hold the option key to choose "Library", since the ~/Library is hidden on ML)

IPhoto 11 (9.2.1) can't use iCloud Mail smtp server for email.

iPhoto 11 (9.2.1) can't use iCloud Mail smtp server for email. "The email server didn't recognise username/password combination". Both appear correct in preferences/accounts. Mail sends and receives messages perfectly.
(This problem also occurs when trying to send from Thunderbird, however both iPhoto and Thunderbird can send perfectly well using the Gmail server).

Hi there
I should explain that I have 5 days experience of the iMac but have had a working iCloud account with my iPad for several months. I don't think this is an iCloud issue as such. My thought is that this is something to do with the Mail application itself and its relationship to my Apple ID etc. (Perhaps when the iMac first configured itself?)
I have deleted and manually reset both Mail and iPhone account settings for iCloud using the Apple recommended settings and I have tentatively checked that the username/password combination is as expected in Keychain but I'm too much of an Apple novice to go any further with that.
On a PC I think I would try reinstalling the Mail programme but I don't see that as an option.

SMTP host for the e-mails in Oracle Application Server 10g

Hi,
I would like to ask in which file from the Oracle Application Server 10g is the configuration for SMTP Host for the e-mails.
Thank you,
Mihaela

Hi Ibrahim,
You can do an easier installation by only using base release of 10.1.2.0.2. What I stated would be good practice:
By * DB 10.2.0.3 ---- > u mean (Database Version) => Yes, use Database version 10.2.0.3
By * Identity Management 10.1.4.0.1 (OID/SSO) -----> u mean (Application Server infrastructure) => Yes, use Identity Management 10.1.4.0.1 instead of the infrastructure on Application Server 10.1.2.0.2
By * Application Server 10.1.2.0.2 -----> u mean (Middle Tire Forms&Report Services) => Yes, use Application Server 10.1.2.0.2 as middle-tier. When installed, upgrade it to 10.1.2.2 (with the latest patchset)
By * Patch Application Server DB client to 10.1.0.5 ----> u mean what? => Before you upgrade AS to 10.1.2.2 it's mandatory to upgrade the Database client software in the Application Server 10.1.2.0.2 home to 10.1.0.5. Default is 10.1.4. You'll see database client version by for instance starting SQL*Plus.
For your Developer (Forms) upgrade: Forms 4.0/4.5 - 6i -> 10g. See: http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html. If you have tons of Forms, then I recommend using a tool like the great PITTS.CON (http://www.pitss.com/en/pcon/index.htm).
Regards,
Martin

HT4864 How do I directly change the incoming mail server for icloud in Mail? It's grayed out.

How do I directly change the incoming mail server for icloud in Mail? It's grayed out.
I ask this because I have suddenly stopped receiving most e-mails in Mail. I've found that my incoming mail server (p01-imap.mail.me.com) is different from what the Apple mail setup assistant recommends (mail.me.com), but I cannot change it because it is grayed out. Any ideas?

I'm afraid that AFAIK you've gone through the card. You could try Support, though I don't know how helpful they are likely to be.
To contact iCloud Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee.

Using BT Mail smtp server for non-bt account

Having recently discovered the hard way that I was migrated (and had no BT e-mail for 3 days), I have now discovered that all the authorisations I had set up for sending of e-mail fwith the senders address being a non-bt account have gone.
The help files point me in the direction of setting up BT Mail to get non-bt mail for me. This is not what I want. All I need is to authorize andrew@******.org.uk as an authorised user on my BT account. Thunderbird is quite capable of getting the mail from mail.****.org.uk with POP3. I just need to be able to use the BT smtp server for outgoing mail only.
Help Please
Andrew Johnson
Solved!
Go to Solution.

Appears to be working again with andrew@******.org.uk
I guess it was just a glitch.

Mail having more than one notification for each mail received

ever since I've upgraded to Yosomite X from Mavericks the Mail built in app is been acting weird. As Soon As it is connected to the internet the Mail Application collects emails n i keep on getting notifications at the top right bar for each single mail i would get minimum two notifications if not four or three. Am getting annoyed by this issue especially if ur waiting for an email n hyped about it i would be disappointed lol.
Plz if anyone has a solution for this offer you're help and it is well appreciated.

Mail preferences under Compose tab. Set which account to send mail from, or set it to use the highlighted account.
You might also verify in Mail preferences under Accounts, that each account has it's own SMTP server. Be sure the correct one shows for each account. I would also check the box to use only that server for that account, which will insure that the correct server and only that server will be used for the account. Otherwise if the SMTP server for the sending account fails, it will just switch to another account's server.

TS3899 What out going mail server should I use?

What out going mail server should I use with 1, 3G , 2, using wifi at home with telecom, 3 using wifi at work using call plus ( slingshot)

Ask the email service provider.
No one here can tell you as you've provided no information.

What is the AT&T smtp server for? The SSL is set to "off"

I was looking around at my Mail settings on my iPhone and noticed there's an AT&T smtp server window. You access it my Settings/Mail Contacts Cal/one of your email accounts/SMTP server/. At the top is the smtp server for your email address which is on, and below are smtp server panes for your other email accounts which are set to off. But one of those smtp server panes is for the AT&T smtp. For what function is it used for? It's vreyed out but SSL set to OFF for the AT&T smtp and the Yahoo smtp, but all the other smtp's are set to ON for SSL.
Isn't it better for the Secure Sockets Layer (SSL) to be on? Why is Yahoo's and AT&T's set to OFF. I can't find where to access a non-greyed out AT&T's smtp window pane.

Allan Sampson wrote:
when sending/receiving via AT&T's cellular network, all data is encrypted over the network, which is a GSM standard.
Note that in the USA a weaker version of the GSM encryption is used than in Europe.
http://www.gsm-security.net/faq/gsm-encryption-algorithm-a5-cipher.shtml
Also, the GSM encryption has been broken a long time ago, but someone whould have to sit between the phone and the basestation to capture and decode the traffic (or they must have access to the network operator's, so called, Legal Intercept interface).
http://www.gsm-security.net/faq/gsm-a5-broken-security.shtml
And, AFAIK, the GSM encryption is only in use on the wireless connection between the device and the basestation it is connected to (not on the operator's backbone network, and not when the traffic exits the operator's network and goes to the Internet outside, which it must, in order to get to SMTP servers not in the operator's machine rooms).
And a last point: Even if you use SSL/TLS between the client and the SMTP server, it is not necessarily used from the SMTP server to the receiving email server (which might mean that the message travels through tens of systems unencrypted until it reaches its destination).

Creating more than one account for a single user

I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
Thanks for all the help! It feels good to be a part of the goodguys team =)
Thanks again!

Ghost,
First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
Scott

Has anyone used more than one event for one project?

Hi,
I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it. I waited to see if I would get used to it. But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'. The separation of the media and projects creates more problems than solutions with my workflow.
The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same. The new Event and Project system adds complexity to organization and archiving. I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly. I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
Has anyone out there used more than 1 Event for 1 Project? Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project. I don't need to use the media from multiple Events for the same Project. And I've never used it for a reason. I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project. I think we should bring back the connection between Events and Projects in a meaningful way.
This is a throw back to the older days, but that's not always a bad thing. Let us keep our projects, or timelines, in the Events folder. Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section. Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
Thanks,
- David

My original fear was that FCPX was just going to be iMovie Pro... It so is not!
People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows. For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder. I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
But that's me.
Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.] You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

More than 1 smtp server for out going mail

Similar Messages

Maybe you are looking for