More than 100 mb xml file , giving out of memory error in BIP 10.1.3.4

We are running outofmemory error, java heap space error, if we run a report which has more than 100mb xml, with two or more grouping in RTF template.
How to configure it to work with better performance for bigger XML files ?
Any particular setup , pointers are welcome.
Thanks.

Long time no see vet. Your problem sucks. I would go to sun site review there articles on JVM tunning. To solve this problem you will need to change the command line arguments to JVM to increase the heap space.
java -Xms<initial heap size> -Xmx<maximum heap size>
Defaults are usually: java -Xms32m -Xmx128m
-Xm*s* - initial java heap size
-Xm*x* - maximum java heap size
-Xm*n* - the size of the heap for the young generation
This is a good article: http://java.sun.com/developer/technicalArticles/Programming/turbo/
Also, if this solves your problem please check it off so I can get some points. I've been out of the game for awhile.
Ike Wiggins
http://bipublisher.blogspot.com

Similar Messages

E71 keeps giving out of memory error; I can't find...

My Nokia E71 (it's black so it may be an E71x, I guess) keeps giving me out of memory errors. I use my phone for nothing but voice calls, text messages, and emails. I have cleared all call logs, deleted all emails except 5 (they have no attachments) and cleared deleted emails, and deleted all text messages. I went into file manager and made sure there are no images, videos, etc. on the phone. I set up options to use memory card for emails. I've turned the phone off, waited 15 or 20 seconds, and turned it back on.
I did all this a couple weeks ago. Ever since then. every couple days I get these out of memory errors, and the phone memory shows me 119 MB used and something like 300K free. I'm at the point where every few emails that come in, I have to delete all emails, erase all text messages, etc. or the phone is just too low on memory to operate.
What else can I try? I don't have any additional applications installed. I've even tried to delete built-in apps such as RealPlayer but it didn't seem like that was possible.
This is getting really annoying. Please help!

@EricHarmon
Although all user data would be deleted, have you tried resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user)?
Happy to have helped forum with a Support Ratio = 42.5

Processing Multiple Files for more than 100 Receive Location - File Size - 25 MB each file, file type DML

Hi Everybody
Please suggest.
For one of our BizTalk interface, we have around 120 receive locations. We are just moving (*.dml) files from the source to destination without doing any processing.
We receive lots of files in different receive locations and in few cases the file size will be around 25 MB and so while moving these large files, the CPU usage is varying between 10% to 90+% and the time consuming for this single huge file is around
10 to 20 minutes. This solution was already in place and was designed by the previous vendor for moving the files to their clients. Each client has 2 receive locations and they have around 60 clients. Is there any best solution for implementing
this with in BizTalk or outside BizTalk? Please suggest.
I am also looking for how to control the number of files which gets picked from the BizTalk receive location. For example, If we have say 1000 files in receive location and we want to pick at a time only 50 files only (batch of 50) then is it possible?
because currently it is picking all the files available in source location, and one of the process is dropping thousands of files in to the source location, so we want to control the number of files getting picked (or even if we can control to pick the
number of KBs). Please guide us on how we can control the number of files.

Hi Rajeev,
25 MB per file, 1000 files. Certainly you got to revisit the reason for choosing BizTalk.
“the time consuming for this single huge file is around 10 to 20 minutes”
- This is a problem.
You could consider other file transfer options like XCopy or RobotCopy etc if you want to transfer to another local/shared drive. Or you can consider using SSIS
which does comes with many adapters to send to destination system depending on their destination transfer protocol.
But in your case, you have some of the advantages that you get with BizTalk. For your scenario, you have more source systems (more Receive locations), with BizTalk
it’s always easier to manage these configurations, you can easily enable and disable them when a need arise. You can easily configure tracking; configure host instances based on load etc. So you can consider following design for your requirement. This design
would suit you well since you’re not processing the message and just pass it through from source to destination:
Use a custom pipeline component in the Receive Locations which receives the large file.
Stores the received file into disk and creates a small XML metadata message that contains the information about where the large file is stored.
The small XML message is then published into the
message box db
instead of the large file. Let the metadata file also contain the same context properties as the received file.
In the send port, use another custom pipeline component that process the metadata xml file, retrieve the location of the disk where the file is stored, access the file and send it to destination.
Read the following article on this design..
http://www.codeproject.com/Articles/180333/Transfer-Large-Files-using-BizTalk-Send-Side
This way you don’t need to publish the whole message into message box DB which would considerably reduce the processing time and utilises host instance to process
more files. This way you can still get the advantages of BizTalk and still process large files.
And regarding your question of restricting the Receive location to handles the number of files from receives location. No it’s not possible.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

"rwbuilder" giving **Out of Memory" error

My environment Deatils:
Working on: Oracle EBS R12.0.6 with 10.2.0.2 on AIX 5L 64-bit
When trying to use the following utility on AIX machine then got some memory error:
$ rwbuilder
Unable to alloc heap of requested size, perhaps the maxdata value is too small - see README.HTML
for more information
**Out of memory, aborting**
*** panic: JVMST017: Cannot allocate memory in initializeMarkAndAllocBits(markbits1)
Abort(coredump)
$
Any helpful answer will be highly appreciated.
Regards,
M.U.N.A

Hello,
Oracle® Application Server
Release Notes
10g Release 2 (10.1.2) for AIX
B25203-10
http://download.oracle.com/docs/cd/B14099_19/aix.1012/relnotes.1012/relnotes.pdf
20.1.12 Set REPORTS_DEFAULT_DISPLAY and LDR_CNTRL in the reports.sh File
Ensure that the REPORTS_DEFAULT_DISPLAY and LDR_CNTRL variables are set to
the following in the reports.sh file:
LDR_CNTRL=MAXDATA=0x80000000; export LDR_CNTRL
REPORTS_DEFAULT_DISPLAY=NO; export REPORTS_DEFAULT_DISPLAY
If the LDR_CNTRL variable is not set, then an "Unable to allocate heap" message may
appear if you run Reports executables. For example, if you run rwrun.sh, the
following message appears if the LDR_CNTRL variable is not set:
Unable to alloc heap of requested size, perhaps the maxdata value is too small
REPORTS_DEFAULT_DISPLAY must be set to NO because AIX JDK 1.4.2 does not
support the headless option.
If the REPORTS_DEFAULT_DISPLAY variable is not set to NO, then some Reports
executables do not operate. For example, if you run rwrun.sh and the REPORTS_
DEFAULT_DISPLAY variable is not set to NO, then a core dump and a java core dump
are created
Regards

Outofmemory while creating a new object of file with size more than 100 MB

I have created an application which generates a report by getting the data from our archived files (.zip file).By the time, the application is reaching a file with size more than 100 mb, it is running out fo memory while creating the object of that particular file. Can some one help me by tellin if there id way to resolve this issue?
Thanks in advance

If you're getting OutOfMemoryError, the simplest thing to try is to give the VM more memory at startup. For Sun's VM, I believe the default is 64 MB. You can increase this by using the -X args that control the heap size. For example: java -Xms128m -Xmx256m ... etc. ... This says start with 128 MB of heap, and allow it to grow up to 256 MB.
One thing to consider, though, is do you need that much stuff in memory at once? A more intelligent approach might be to unpack the archive to the file system, and then read a file at a time or a line at a time or a whatever at a time is appropriate for the processing you need to do.

PO MORE THAN 100 CR

I WANT TO CREATE THE PO OF VALUE MORE THAN 100 CR BUT SYSTEM GIVING ERROR MESSAGE
VALUE OF SERVICE ITEM EXCEED THE ALLOWED VALUE LIMIT.
PL GIVE THE SOL'N

Hi,
Standard SAP is not possible to create one service item value more than 100 cores in one line item and also possible with ABAP to customized, But, using ABAP customized standard report problem coming in future.
So, SAP best practice in one service item more than 100 cores divided into two line items and SAVE the PO. The error message is not coming and your problem solved.
After that in PO printing two services same line items merged with one line item with actual value(more than 100 cores).
Note : Our company also do the above procedure.
Hope, it is useful for you,
Regards,
K.Rajendran

Out of Memory Error While deploying as EAR file

Hai,
I was trying to deploy an EAR file of size 63 MB which inturn containing about 60 EJB.jars. No WARs. application.xml has all the entries for the JARs. While I am deploying it is giving Out of Memory Error. Is there any way to tweak this problem. I am using my own hand written java application which uses the SunONE deployment APIs for deployment. Can u please tell how to tackle this problem. I am running my application through a batch file which uses jdk1.4.
Please help me regarding this issue.

You can set the initial heap size and maximum heap size for the JVM, either in the app-server admin console, or maybe in one of your scripts. You look-up the syntax!...
I had this error yesterday. I too had run out of memory (150Mb). You simply need to allocate more to the app-server.

Out of memory error in scaling

Hi,
Scaling my application just for 10 users creates plenty of threads (more than 500) and hanging bcs . of out of memory problem. My system has 512m RAM and i am using 256m for JVM. Hope this is more than enough for 10 users. Is the server releasing threads properly? Help Please
Thanks

Hi,
I am also facing the same problem.
If you have found the solution then please let me know it.
Thanks

Out of Memory Error in Java Agents running in lotus notes

I have a java agent running inside lotus notes jvm. It runs fine for some days but after some days start giving out of memory error and terminates.
I need to restart agent manager in notes to enable java agent running. Is there a way to catch out of memory error so that on its catch i could restart agent manager.
Regards,
Saitu

Dear Peter,
The agent is written in java and
I need to know a way to enter catch block of 'OUTOFMEMORYERROR'.
My whole code is in a try block with two catches, one for outofmemoryerror and another for exception. When outofmemory error occurs control passes to the exception catch and not outofmemoryerror catch.
Since out of memory is an error and not an exception, is there a way to catch it or run some code when out of memory occurs.
Regards,
Saitu

Splitting to multiple files in file adaptor when it's more than 100 records

Hi,
I have a scenario where I'm generating a xml file to the receiver using file adaptor I need to write 100 records per file, if it's more than 100 then I need to write into a different file, to say I need to have 100 records per file.
ABAP Proxy > PI- >File
Any help is really appreciated.
Thanks,
Joe.P

Hi Joe,
What is your source structure and what is your destination structure?
You can go the ABAP proxy route but then your control is not in the integration layer but in the business system. But if you prefer it, here's some code outlined:
data:
index type i,
lcl_proxy type ref to ZCL_Proxy.
i = 0.
try.
loop at lt_recordset into ls_record.
append ls_record to lt_output.
index = index+1.
if index = 100.
create object lcl_proxy.
lcl_proxy->execute_asynchronous(output = lt_output).
index = 0.
clear lt_output.
endif.
end loop.
if index>0.
create object lcl_proxy.
lcl_proxy->execute_asynchronous(output = lt_output).
endif.
catch CX_ROOT.
endtry.
commit-work.

Flex file upload more than 100 MB

Hi,
Is there possibly any method where I can upload file to the server which are more than 100 MB?
I've gone through the nice piece of code demonstrated at here : http://www.zehnet.de/2009/02/23/flex-fileupload-component/ , where it shown how we can upload files in chunks to the server following FP10, but it also limits to the FP max limit of 100 MB. I've also gone through the discussion followed at: http://forums.adobe.com/thread/494366 , where a process been discussed where FP first reads a defined amount of bytes from a file, loads them and upload them and then go for the rest of the bytes, following openAsync() method for FileMode.READ, but which is only available in AIR. So, I wonder, if there could possibly any way to upload more than of 100 MB files in chunks to the server in browser mode of the Flash Player.
Thanks for any coming suggestions.
Rgds,
Santanu.K

Long time no see vet. Your problem sucks. I would go to sun site review there articles on JVM tunning. To solve this problem you will need to change the command line arguments to JVM to increase the heap space.
java -Xms<initial heap size> -Xmx<maximum heap size>
Defaults are usually: java -Xms32m -Xmx128m
-Xm*s* - initial java heap size
-Xm*x* - maximum java heap size
-Xm*n* - the size of the heap for the young generation
This is a good article: http://java.sun.com/developer/technicalArticles/Programming/turbo/
Also, if this solves your problem please check it off so I can get some points. I've been out of the game for awhile.
Ike Wiggins
http://bipublisher.blogspot.com

I red that Oracle Data Integrator provides more than 100 KMs out-of-the-box

I red that
Oracle Data Integrator provides more than 100 KMs out-of-the-box.
Is anybody have any idea how I can reach or view it or use it ?

I got it its under <Oraclehome>oracledi>impexp

Converting document files of more than 100 Mb?

Is it true that you cannot convert document files with more than 100 Mb to PDFs because of that limit on Adobe CreatePDF?
Is there a way of solving this problem e.g. document files with 285 Mb?

have you tried compressing the images in the original document? You can probably compress to 200 dpi if they are only for printing.

I updated my ipod but then all my music deleted, could you please help me figure out how to redownload it? there was more than $100 worth of songs on there.

I updated my iPod Touch but then my computer crashed while it was updating and all my music deleted, so i would like to know how to redownload all my music just this once because there was more than $100 dollars of songs on there and its pretty unfair if ithere isnt a way redownload all that. and i did try backing up my ipod before updating but i cannot find the back up on my computer.

How to redownload purchased apps from the App Store

I bought a MacBook Pro Retina a few months ago. I do not understand why I have more than 100 GB of Others in my storage? Can anyone please explain?

My MacBook Pro with Retina display suddenly gave me a message when I boot up ie 'Your startup Disk is full' then after using a few more times, the screen suddenly become frozen white. Upon getting help, I managed to delete some files but when I checked the Storage space, the largest occupied space was orange color, named 'Others' which is more than 100 GB out of the total 120 GB!! I am surprised and do not understand what 'Others' mean. It is definitely not Audio, Video, Pictures, documents etc It is not mail too. If anyone can tell me what 'Others' in storage mean and how to see the contents of 'Others' so that I can delete those irrelevant files. Any advice and guidance is very much appreciated. Thanking you in anticipation of your early reply.
Joe

"Other" includes everything that is not audio, movies, photos, apps and backups. In other words it includes the OS, mail, documents... See http://pondini.org/OSX/LionStorage.html and What is "Other" and What Can I Do About It?- Apple Support Communities https://discussions.apple.com/docs/DOC-5142
To clear disk space see https://discussions.apple.com/message/24012341#24012341 (in addition to Body's excellent document).

More than 100 mb xml file , giving out of memory error in BIP 10.1.3.4

Similar Messages

Maybe you are looking for