Most users can not use TEST PANELS or run EXE built vi's?

On any fresh install of NI-DAQ, the System Administrator and the first user logged in afterwards can use the Test Panels... button in the "Measurement & Automation Explorer" as well as run the Standalone programs made by Application Builder (LabView 7.1)...all other users can not use the Test Panels... or run the Built-vi's that shows up with plenty of error code 21, "an external subroutine required for execution could not be found", and it seems to be vi's that are called by the vi's we use, like one step away. I have set the permissions to all the related files to FULL as well as hacked the registry's HKeyLocalMachine->Software->NI... as well as the CurrentControlSet->...->DAQCARD... all to full control.
Since the Administrator and the frist user can run the programs it is definitely not a case of missing software, but just permission rights. Please help to get the other users productive as well!

Hi, they have not got the application builder license here...

Similar Messages

HT203042 I need to deactivate my iphone 4. I no longer own and the new user can not use it.

I need to deactivate my iphone 4. I no longer own it and the new owner can not use it.

Giop123 wrote:
this is very easy to do. if you go to : Settings > General > Reset > Erase All Content And Settings. This will restore all factory settings and wipe the phone completely of all your information and data.
Hope this helps
Please reread the OP question: it states that he/she no longer owns the iphone.

Windows 7 64 bit.. When using 32 bit HDR can not use Adj panel

I can bring 3 photos into HDR , brings up preview then I go to Adjust photo in 32 bit and the Adjustment panel is deemed. Has anyone else had this problem? Thanks
Will Moore

Thanks for your quick response I should have known I had cs3 extended and upgraded to cs4. This will save a lot of time trying to make this work.
Regards

I want to ask company when user update to ios7 it stuck all of device and not clearly about apple id to active how to solve it or just keep all of device into recycle because can not use?

i want to ask company when user update to ios7 it stuck all of device and not clearly about apple id to active how to solve it or just keep all of device into recycle because can not use?

You need to enter the Apple ID and password that was used to set up/activate the phone. There is no way around this.

Using LDAP in 9.3.1, I can got the user list but can not use their password

Hey guys, I need your help.
I am using msad for Shared Services External Authentication.
I configurate the msad successfully.
And I could find the user in local domain. But I can not use their password in workspace.
That mean's I could find the user in local domain and do the provision job.
But I can not use their password in localdomain to login on workspace.
Is there any thing I missed when configurate the Shared Services?
Need your help.

you may have trouble -
if password use NATIONAL character, such letters like (я ч ъ ю )
if user, who's have access from SS to AD under "NATIONAL" folder
p.s. my settings for AD
Name: NTLM Domain NAME
Hostname: x.x.x.x
Port: 389
Base DN: DC=NAME,DC=domain suffix
User DN: CN=user_name, CN=Users Catalog
Login: sAMAccountName
Email: mail

Mac users DO NOT use this Desktop software! it will cause hours of heartache

I have exactly the same issue with a Bold and have still to find any option to resolve the issue other than to entirely wipe the device and go through the tiresome process of reinstalling and updating everything to the way i had it.
I am utterly furious with myself for trusting RIM to release a desktop option for Mac users. I choose a Blackberry for its push email and i love the device very much, even despite Initially going through 6 Bolds until i received a new one from Vodafone UK that was not reconditioned and finally worked properly. Since then everything has been fine until this amateur attempt at writing software for Mac users.
I don't have a lot of time to myself and i can think of nothing worse than spending the little time i have searching through endless ill concieved solutions that simply do not work. Just by plugging in my Bold and hitting sync has destroyed my contacts, ringtones and other settings. Why bother to release software until it is entirely tested? Why would you want to put your customers through this demorolising procedure which does nothing more than further emphasise your true lack of interest in supporting anything Mac. I dont want an iphone, i believe that your phones aresuperior for business users like myself.
Please, please, if you are a Mac user DO NOT use this software unless you really want to go through hell just trying to get it back to the customised form you spent loving hours to get right. It destroys your address book and other elements and not one solution posted anywhere on the Blackberry web site works. YOU HAVE BEEN WARNED.
The reason i am a Mac users is because i need a reliable hardware/software solution that works out of the box. It is entirely obvious that RIM havent quite realised the long term benefits of this really very simple idea!

thecount wrote:
well, I attempted to use it, but I initially just tried syncing just the tasks and it would not do that! so I gave up and uninstalled.
I now have been trying to sync with pockmac but that also has issues.
Only reason I am not going to get an iphone, is that I really need to sync with entourage and I use notes on it extensively. and I don't think you can sync an iphone with entourage notes?
can't win can we?
this was one reason i've been sticking with the blackberry as well. it appears though that now you can... http://support.apple.com/kb/HT1670
i really have liked my blackberry, and have been waiting for this software for some time now, but if this is rims idea of a client i have no choice but to go to the iphone...

Can not use 'AT LINE-SELECTION' with SET PF-STATUS

Hi experts,
my code is like below:
PARAMATERS: .....
SET PF-STATUS 'st_nam'.
Perform Load_data . ' For list display
START-OF-SELECTION.
AT LINE-SELECTION.
Perform list_detail.
AT USER-COMMAND.
CALL SCREEN '1001'.
END-OF-SELECTION.
When I execute the report , the basic was displayed , but when then i double click on the list to call the next screen '1001'. It did not work , but if i omit the SET PF-STATUS m AT LINE-SELECTION worked week , so in this case what has happened i how can i solve this problem,
Thaks,
PS: Reward immediately

Hi,
Thank you very much for your helpful answers, I have copied the report downto my system and test it , When i used SET PF-STATUS , i can not use AT LINE-SELECTION to capture events ...May be we can not use these 2 statements in parallel,...:D
Thanks,

User can not print

One user can not print from Photoshop CC. I have test other users from the same computer and they can print.
I use Windows 7 Ultimate and SBS 2011.
Is there a way to clear all Photoshop CC from a user profile? it must be the first try.
Does someone know other user related problem with printing in Photoshop?

Thanks.
After lots of work, I found the problem. A corrupt local user profile.
After logon on another computer and everything work, I try to identify the cause on the user profile.
After I remove the local profile, I using a network so it creates minor problems, everything works.
The thing which make me not think about this was that all other program, even Adobe, could print.

Weblogic user can not access WebCenter Spaces

I have WebCenter PS2 integrated with osso and oid 11g. I created a user weblogic_admin to be an administrator for WebCenter (as per the install instructions).The weblogic_admin user can log onto WebCenter as an administrator. The weblogic user can not log in to WebCenter at all, but can sign on to Weblogic Console and Ent. Mgr.
Does anyone know what can cause this to occur and how to fix it?
Thank you.

You probably need to check the securityrealm inside of WebLogic and see how your authenticators are set up and what order they are in. You may also need to use the Webcenter configuration to add weblogic as an AUTHORIZED user to get into your Spaces.
Most likely, your WebCenter/WebLogic is configured not to allow people to log in as weblogic (which is a good thing, by the way).

How to set up the time a user can control a remote panel

Hi Everybody.
I'm doing an application using remote panels, however, I can't find information about how can I limit the time a user can control the remote panel.
I've seen in the Property Node in Remote Panels:Connection To Clients the value "Control end time" which I supose it contains the time when the control is returned to the server but I have no idea how to modify this.
Best Regards.

Hi inner_trax, actually LabVIEW does not provide such a feature natively; however you can start thinking about having your remote panel VI shutting down after some specific time and then having in your server another VI running always and that each specific time ti starts the remote VI; think about it, it may help you reaching your goal.
Eric NI

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

DBCA can not use ASM for database storage due to following reason: Could no

Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advance

Thanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks

Have been having issues with firefox crashing & v e r r y s l o w also sluggish, I removed by the programs & features than redownloaded it, I can not use it.

Had to remove it for the last & final time. I love & miss my Firefox, but can't take the chance of someone getting into my system. The upgrade had yahoo toolbar which is always easy to get rid of (thank God) but I have this yellow sign in my popup that says something about the system not being safe, & we can not go to any web sites. Why is it everything that is upgraded always turns out to be BULL. I can not use Firefox for anything, so once again had to remove it using the programs & features update/remove. Windows7 Home Premium 64-bit Operating System. HELP.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' After resetting Firefox, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Reset Firefox – easily fix most problems]] article for more information.
To Reset Firefox:
# Open the Troubleshooting Information page using one of these methods:
#*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Reset Firefox" that looks like this: [[Image:Button reset]]. Click on it.
#Firefox will close and reset. After it is done, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!

Can not use previous password in ISE 1.1.2 patch-5

this is my password-policy:
password-policy
lower-case-required
upper-case-required
digit-required
no-username
disable-cisco-passwords
min-password-length 6
password-lock-retry-count 5
I also entered the followings:
conf t
password-policy
no password-locked-enabled
no no-previous-password
my initial "admin" account has the password of "Checkpoint1234". It locked me out after 5 attempts from the webUI. Fine, I CLI into the box and reset
the password, when I tried to reset the password for "admin" to "Checkpoint1234", it tells me that I can NOT use a previous password.
How do I disable this option altogether? In other words, I want to use previous password.
By the way, in the webUI password-policy, you have to set the "Password History" between 1 and 10. WTF!!!
Thanks in advance.

Admin account for the web UI seems to be locked out. So it needs to be reset from CLI.
An incorrect password for your administrator user ID entered enough times to disable the administrator password. The minimum and default number is five. The Cisco ISE user interface “locks you out” of the system and suspends the credentials for that administrator ID until you have an opportunity to reset the password that is associated with that administrator ID. It does not affect the CLI password for the specified administrator ID
Step 1 Access the direct-console CLI and enter the following command:
admin# application reset-passwd ise
Step 2 Specify a new password that is different from the previous two passwords that were used for this administrator ID:
Enter new password:
Confirm new password:
Password reset successfully
If you only want to use the previous password, you should change the password policy first. After you have successfully reset the administrator password, the credentials become immediately active in the Cisco ISE and you can log in with the new password without having to reboot your system.
Review the section "Password Negated Due to Administrator Lockout" at the folowing location:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/installation_guide/ise_postins.html

I can not use CanoScan N670U with my Macbook pro. I download canoscan toolbox 4.1 from Cannon website. It keep saying "the scanner plug-in was not found". Please help

I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help

There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
Problem:
You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
You get a couple of error messages, which you click through.
You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
Solution:
BEFORE you restart, and with the installer package still open -
1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
Applications : Canon Utilities
Applications : Canoscan Toolbox
and remove the prefix Into_ from each folder
2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
Library : CFMSupport
and if it didn't, move it there yourself
THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know.

Most users can not use TEST PANELS or run EXE built vi's?

Similar Messages

Maybe you are looking for