Motion 5.1 problem - not appearing!
I kept having problems with Motion 5.1 and on several occasions trashed it and re-installed the 'paid for' Motion 5.1 from Apple. On the last attempt I found that I was not able to download and re-install the programme unless I also downloaded and installed Maverick so I complied. From that point in time, about a month ago, I've been unable to get the programme to appear on screen, just the screen centre box announcing it, nothing else. Force Quit shows its presence in thenokrmal colouring, not in red to show it's not responding.
Hunting around in the Appe Store, I found an update, Motion Content V 1.1 which advised that all Motion 5 users should download, so I did that. Now I still can't raise theprogramme. That update was not available as an ordinary update through the usual way of Software Update to me. I had to find it!
As an extra precaution, I checked on the OS needed for this programme and note that my Maverick (10.9.1) is supposed to be correct.
Does anyone know what's going on with this Motion 5 and can provide help, please?
Whether or not my achievement is temporary I don't know but, by restarting my computer whilst the Motion5 box was aggravatingly remaining on screen, the opening screen came up and I then selected the programme as normal.
Similar Messages
-
"Motion and Compressor Will Not Open Because Of A Problem"?
Last week I installed FCS 3 on my iMac and everything appeared to work OK.
However, as my iMac had been cluttered with rubbish for 2 years I erased the Hard Drive and reinstalled OSX 10.6.3 together with all FCS 3.
I have only used FCP and STP since then but today I discovered that Motion and Compressor "will not open because of a problem".
Here are the reports where it appears that in both cases the "Dyld Error Message", whatever that is, reports that "Library not loaded etc. etc."
Incidentally there are mentions of 14 and 18 crashes since last reports. This is ridiculous as I have only just tried to open them 3 or 4 times in the last 5 minutes . . . . and the computer OS and apps are all freshly installed.
Process: Motion [578]
Path: /Applications/Motion.app/Contents/MacOS/Motion
Identifier: com.apple.motion
Version: ??? (???)
Build Info: Motion-6870000~22
Code Type: X86 (Native)
Parent Process: launchd [98]
Date/Time: 2010-05-21 15:45:02.265 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 148993 sec
Crashes Since Last Report: 14
Per-App Crashes Since Last Report: 2
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Motion.app/Contents/MacOS/Motion
Reason: image not found
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, Unknown
Process: Compressor [629]
Path: /Applications/Compressor.app/Contents/MacOS/Compressor
Identifier: com.apple.compressor.Compressor
Version: ??? (???)
Build Info: Compressor-3015328~22
Code Type: X86 (Native)
Parent Process: launchd [98]
Date/Time: 2010-05-21 15:52:33.008 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 149440 sec
Crashes Since Last Report: 18
Per-App Crashes Since Last Report: 6
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/StompTypes.frame work/Versions/A/StompTypes
Reason: image not found
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, UnknownAs I was installing Motion from a backup disk image, I thought maybe the .dmg was corrupt, so after deleting again I put the original DVD in and reinstalled.
However, it still won't open and the crash report seems a little different:-
Process: Motion [783]
Path: /Applications/Motion.app/Contents/MacOS/Motion
Identifier: com.apple.motion
Version: 4.0.0 (687)
Build Info: Motion-6870000~22
Code Type: X86 (Native)
Parent Process: launchd [131]
Date/Time: 2010-05-21 17:44:14.127 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 153737 sec
Crashes Since Last Report: 27
Per-App Interval Since Last Report: 218 sec
Per-App Crashes Since Last Report: 4
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __ZN14LiSimpleCamera15setDOFDepthModeEi
Referenced from: /Library/Application Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Versions/A/Ozone
Expected in: /Library/Application Support/ProApps/SharedA/Frameworks/Lithium.framework/Versions/A/Lithium
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, Unknown -
I have a problem in exporting the video icon does not appear "share"
Hi,
I purchased the program motion 5 from Apple Store
But I have a problem does not appear Icon
I experimented with the trial version before to buy the full version
Now I am very disappointed because all attempts failed
I have read some of the solutions in this site but to no avail
Thank you in advance for helping me
SaidBut I have a problem does not appear Icon " share "
-
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
I have a problem with my apple tv, I can watch my music of my mac in the TV but I cant
transmit music or video from my mac to my apple tv because not appear the logo
Apple Tv in my itunes. Somebody help me?Welcome to the Apple Community.
The Apple TV 2 doesn't show up under devices like the Apple TV 1, to send video and music to the Apple TV you need to use the Airplay Option which appears in the lower right corner of iTunes. -
good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?
?
-
I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?
Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.
-
When I forgot my password, my husband received the instructions at his email. His email does not appear any where in my account. How do I solve this problem?
When you set up your ipad did you or your husband also set up a rescue e-mail address for you? If so, that would be why he received the instructions. Or do you sync your ipad with his computer?
Actually in terms of it being a problem, it actually makes it easier for you to answer your security questions and follow the instuctions to get back on your ipad. Otherwise, you'll have to call Apple Support.
To delete the rescue e-mail account pleases read this thread. (Poster's photos did not come through with the instructions.)
https://discussions.apple.com/thread/5218141?start=0&tstart=0 -
A word document was emailed to me. I can open the document without a problem on my iPad 2. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.
If you want to edit a word document then you will need an app on your iPad that supports word so that you can copy them to it via 'open in' e.g. Apple's Pages app or a third-party app such as Documents To Go or QuickOffice HD
-
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
Content type problem for 'does not appear to be a proper arcive'
Hi all,
The following code will create a ZipOutputStream using ByteArrayOutputStream (not FileOutputStream) and attach the outputstream to a MIME multipart email using ByteArrayDataSource (so the file never exists physically).
It works and sends the email but the zip 'does not appear to be a valid archive' even though it looks about the right size. If I do the same and use FileOutputStream to create a physical file it works OK. I think it is an issue with the content type, or maybe this just isn't possible!
I have tried:
byteArray.toByteArray(),
byteArray.toString().getBytes() and application/zip & application/unknown.
Can anyone help or suggest an alternative way to create a 'in-memory' zip file that can then be emailed?
Many thanks
// Specify files to be zipped
String[] filesToZip = new String[3];
filesToZip[0] = "C:\\Program Files\\NetBeans3.6\\firstfile.txt";
filesToZip[1] = "C:\\Program Files\\NetBeans3.6\\secondfile.txt";
filesToZip[2] = "C:\\Program Files\\NetBeans3.6\\thirdfile.txt";
byte[] buffer = new byte[18024];
// Specify zip file name
String zipFileName= eq_rt.getReportName() + ".zip";
try {
// Create ZipOutputStream to store the FileOutputStream
//ZipOutputStream out = new ZipOutputStream(new FileOutputStream(zipFileName));
ByteArrayOutputStream byteArray = new ByteArrayOutputStream();
ZipOutputStream out = new ZipOutputStream(byteArray);
// Set the compression ratio
out.setLevel(Deflater.DEFAULT_COMPRESSION);
// iterate through the array of files, adding each to the zip file
for (int a = 0; a < filesToZip.length; a++) {
System.out.println(a);
// // Associate a file input stream for the current file
FileInputStream in = new FileInputStream(filesToZip[a]);
// This ROCKS as it is passing a array into the text file .getBytes() seems
// to be the KEY in getting ByteArrayInputStream to WORK
String strSocketInput = "TAIWAN";
ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
//ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc() ) );
// Add ZIP entry to output stream.
out.putNextEntry(new ZipEntry(filesToZip[a]));
// Transfer bytes from the current file to the ZIP file
int len;
while ((len = baIn.read(buffer)) > 0)
out.write(buffer, 0, len);
// Close the current entry
out.closeEntry();
// Close the current file input stream
baIn.close();
// DataSource sourcezip = new FileDataSource(zipFileName);
//DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/octet-stream");
DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/octet-stream" );
// Create a new MIME bodypart
BodyPart attachment = new MimeBodyPart();
attachment.setDataHandler(new DataHandler(sourcezip));
attachment.setFileName(zipFileName);
/* attach the attachemnts to the mail */
multipart.addBodyPart(attachment);
// Close the ZipOutPutStream
out.close();Many thanks Dr Clap. Moving the Closing the ZipOutputStream before I attached it to the email solved my problem.
/* Close the ZipOutPutStream (very important to close the zip before you attach it to the email) Thanks DrClap */
out.close();
/* Create a datasource for email attachment */
// DataSource sourcezip = new FileDataSource(zipFileName);
DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/zip" );
/* Create a new MIME bodypart */
BodyPart attachment = new MimeBodyPart();
attachment.setDataHandler(new DataHandler(sourcezip));
attachment.setFileName(zipFileName);
/* attach the attachemnts to the mail */
multipart.addBodyPart(attachment); -
downloads do not appear all (only the first two) in the download statusbar (could be a ff19 or downloadhelper or unmht problem) and none in the download window
used ff19
with
Download Statusbar v0.9.10 by Devon Jensen
UnMHT v6.2.0 by http://www.unmht.org
DownloadHelper v4.9.14
had to revert to ff18.0.2Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
Did you try to disable other extensions?
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
My daughter and i use same computer she uses firefox and recently we have noticed on facebook apps we get the message This XML file does not appear to have any style information axxociated with it. The document tree is shown below
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Problem while sending mail -Logo not appearing.
Hi,
The requirement is to send a message as a text and not as a PDF attachment to a recepient.
( I am converting the smartform code into HTML format - I referred to url
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp which contains the rough code ) and am sending the mail to the
recepient.
The mail is getting generated, the text of the message is getting properly formatted as desired.
But the company logo is not appearing .
I am able to see the logo when I send the mail to my employer's mail server outlook, but am unable to see
the logo when I send the mail to the customer's mail server in outlook.
Can anybody suggest what could be going wrong?
Regards,
Girish.Hi Brad John,
Thank you for your reply.
I tried 2 methods :
1. I attached the logo to the smartform and sent the mail to my employer's mail id and
my customer's mail id.
I am able to get the logo and text in my employer's mail server but in my customer's mail server,
the text and logo are getting split into 2 attachments in the body of the mail
instead I require the text and logo in the body of the mail.
2. I removed the logo in the smartform and tried typing the url in the smartform window text as suggested in
URL http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/2273. [original link is broken] [original link is broken] [original link is broken]
The logo does not appear iin my employer's mail server but in my customer's mail server,
all I get is a text of the URL.
Can you please suggest the possible reason for this problem
The url of the IMG tag is accessible externall.
What is meant by drop/reference MIME data in a location that is external to corporate firewall.
Please elaborate.
Many thanks for your time and patience.
Regards,
Girish.
Maybe you are looking for
-
How can I get 2 different track from iTunes playing on 2 different stereos?
We are remodeling a part of our home and decided that this would be the time to install a whole house audio system. We would like to use our iTunes library as a source and be able to play different tracks in different parts of the house (also called
-
Function Module in Generic DataSources in BI
Hi, I appreciate your answer about the Function Module in Generic DataSources in BI. These are the steps I followd on R/3 side. 1) Create a structure with the R/3 table fileds based on the requirement. 2) Create a function module by copying RSAX (Fun
-
A clever way of replacing some characters in a string
I have a string passed between methods in classes. Due to a face that I don't have all data ready when the string is constructed at the first place. I need to a few of sections in the string before I can use it. I am wondering any clever way to carry
-
Could not load or refresh node tree creation failed on node
Hi Experts I created one user with MSS role and ERP COMM role. It is working fine. We restarted the server for other purpose. Then surprisingly the MSS role was locked. I am unable to see the MSS tab in the top level navigation. When i expand the wor
-
i am trying to restore my i tunes library from back up discs but 2 of the discs say there is not enough memory and wont restore can anybody help please?