[mount] FAT: codepage cp1252 not found
Hello
When I mount an usb memory (FAT32), accents (special non-english characters) are incorrectly read by the system (bad display when listing files for example). mount uses "cp850" for FAT32. For western european microsoft codepage (cp1252), I try to use :
mount /mnt/cle -o codepage=1252
And I get :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
And with dmesg | tail :
FAT: codepage cp1252 not found
How to read my FAT32 drives (same problem with a FAT32 Windows disk) ?
Sylvain
Hi,
I've tried a few things, but there is an error which stands out:
# modprobe nls_iso8859-1
modprobe: ERROR: could not insert 'nls_iso8859_1': Invalid argument
# modprobe --show-depends nls_iso8859-1
insmod /lib/modules/3.16.2-1-ARCH/kernel/fs/nls/nls_iso8859-1.ko.gz
# insmod /lib/modules/3.16.2-1-ARCH/kernel/fs/nls/nls_iso8859-1.ko.gz
insmod: ERROR: could not insert module /lib/modules/3.16.2-1-ARCH/kernel/fs/nls/nls_iso8859-1.ko.gz: Invalid parameters
That doesn't seem right ...
Similar Messages
-
Standby mount ID 0x number not found
Hi All,
Recently I have found in my bdump of the database the following trace files are generating and its updating several times per min.
-rw-r----- 1 oracle dba 3174592 Dec 7 01:49 alert_ORAJDEPD.log
-rw-r----- 1 oracle dba 2934 Dec 7 01:49 sid_lns1_1406.trc
-rw-r----- 1 oracle dba 954 Dec 7 02:00 sid_m001_20074.trc
-rw-r----- 1 oracle dba 5389 Dec 7 02:00 sid_lgwr_1344.trc
-rw-r----- 1 oracle dba 23735 Dec 7 02:11 sid_arc1_1404.trc
There is standby database configured for the SID database.
Conetnts of the above one trace file is
+[SID:/d002/oracle/SID/dumpb] tail -f sid_arc1_1404.trc+
*** 2009-12-07 02:08:13.607
Standby mount ID 0xXXXXXXXX not found
*** 2009-12-07 02:09:13.762
Standby mount ID 0xXXXXXXXX not found
*** 2009-12-07 02:10:13.917
Standby mount ID 0xXXXXXXXX not found
*** 2009-12-07 02:11:14.068
Standby mount ID 0xXXXXXXXX not found
*** 2009-12-07 02:12:14.225
Standby mount ID 0xXXXXXXXX not found
*** 2009-12-07 02:13:14.372
Standby mount ID 0xXXXXXXXX not found
*** 2009-12-07 02:14:14.516
Please advice me what is the problem here and what is the effect to the database. The standby is in sunc with the production.
Thanks in advance.
Arun kumarHi Adroit,
Follwong is the part of the alert log file.. I have pasted only part of it as it is too big... and there is nothing interesting too other than the below.. Please advice.
Mon Dec 7 01:49:44 2009
LNS: Standby redo logfile selected for thread 1 sequence 13259 for destination LOG_ARCHIVE_DEST_2
Mon Dec 7 02:22:54 2009
Thread 1 advanced to log sequence 13260 (LGWR switch)
Current log# 3 seq# 13260 mem# 0: /d701/oracle/SID/redo03_SID_01.log
Current log# 3 seq# 13260 mem# 1: /d702/oracle/SID/redo03_SID_02.log
Mon Dec 7 02:23:10 2009
LNS: Standby redo logfile selected for thread 1 sequence 13260 for destination LOG_ARCHIVE_DEST_2
Mon Dec 7 02:52:57 2009
Thread 1 advanced to log sequence 13261 (LGWR switch)
Current log# 1 seq# 13261 mem# 0: /d701/oracle/SID/redo01_SID_01.log
Current log# 1 seq# 13261 mem# 1: /d702/oracle/SID/redo01_SID_02.log
Mon Dec 7 02:52:58 2009
LNS: Standby redo logfile selected for thread 1 sequence 13261 for destination LOG_ARCHIVE_DEST_2
Mon Dec 7 03:03:49 2009
Thread 1 advanced to log sequence 13262 (LGWR switch)
Current log# 2 seq# 13262 mem# 0: /d701/oracle/SID/redo02_SID_01.log
Current log# 2 seq# 13262 mem# 1: /d702/oracle/SID/redo02_SID_02.log
Mon Dec 7 03:03:55 2009
LNS: Standby redo logfile selected for thread 1 sequence 13262 for destination LOG_ARCHIVE_DEST_2 -
Could not mount device..vtoc not found
I try installing and end up with this mesage.. any help how to make a bootable cd ?
Hi,
Thank you for replying
I have created /u02/crs on both nodes and this folder belongs to user oracle group dba
First i was creating cluster.conf using ocfs2console then propagate this files to node2. After that i load and online the cluster using o2cb command and format /dev/sdc1 using ocfs2console. Then i was trying to mount the /u02/crs for ocfs2, on node 1 the mounting was successfully without any errors but when i was trying to mount on node 2 the errors came out
root@rac2>#mount -t ocfs2 -o datavolume,nointr -L "crsshared" /u02/ocrs
ocfs2_hb_ctl: Bad magic number in inode while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted"
any idea of this?
appreciate for your help
cheers -
GUI_DOWNLOAD - error codepage could not foune.
Hi All,
I m downloading data from SAP tables to txt file.
When I m running this program in SE38 then it works fine. But when I m scheduling it in background it is giving error - CODEPAGE COUND NOT FOUND.
I kept exception codepage = ' '.
Reply. Thanx.
-- umeshHai Umesh
Check the following Documentation
Character Representation for Output
Description
Use parameter CODEPAGE to specify the desired target codepage. If this parameter is not set, the codepage of the SAP GUI is used as the target codepage.
Value range
4-digit number of the SAP codepage. The function module SCP_CODEPAGE_BY_EXTERNAL_NAME returns the SAP codepage number for an external character set name, for example, "iso-8859-1". The function module NLS_GET_FRONTEND_CP returns the appropriate non-Unicode frontend codepage for a language.
You can determine the desired codepage interactively, if the parameter with_encoding of method file_save_dialog is set by cl_gui_frontend_services.
SPACE: Codepage of the SAP GUI
Default
SPACE
Thanks & regards
Sreenivasulu P -
[Solvd]hd0,gpt1error: file /EFI/Microsoft/Boot/bootmgfw.efi' not found
I'm trying to configure GRUB2 to load Windows 8 on UEFI system.
os-prober does not detect it.
grub-mkconfig creates only for Linux (tried both with mounted and unmounted Windows partition).
So I went for manual entry.
I executed the following
$ mount /dev/sde1 /boot/efi/
$ grub-probe --target=fs_uuid /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
69DB-D2EB
# grub-probe --target=hints_string /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
--hint-bios=hd4,gpt1 --hint-efi=hd4,gpt1 --hint-baremetal=ahci4,gpt1
Created menuentry for /boot/grub/grub.cfg
menuentry "Microsoft Windows 8" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid --hint-bios=hd4,gpt1 --hint-efi=hd4,gpt1 --hint-baremetal=ahci4,gpt1 69DB-D2EB
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
And when I choose it it says
hd0,gpt1error: file /EFI/Microsoft/Boot/bootmgfw.efi' not found
Note that EFI partition is not mounted is fstab (does it make a difference for GRUB?).
Also, specifying
chainloader /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Gives the same not found.
P.S. Windows "fast start" is disabled
Last edited by Doctor Drive (2013-09-29 09:57:25)Doctor Drive wrote:
Thank you, the.ridikulus.rat.
I just booted back from windows to tell the same.
I just found the solution here
http://unix.stackexchange.com/questions … th-windows
I was configuring according to the ArchWiki.
The ArchWiki was missing that point.
https://wiki.archlinux.org/index.php/GR … I-GPT_Mode
it said
menuentry "Microsoft Windows Vista/7/8 x86_64 UEFI-GPT" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid $hints_string $uuid
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
Just edited the wiki. Thanks!
I initially wrote that section of the wiki (with "--set=root" included), but someone had changed it recently ( https://wiki.archlinux.org/index.php?ti … did=276742 ).
Last edited by the.ridikulus.rat (2013-09-29 10:02:48) -
Hello,
I have a Cisco IPS4255 that will not boot an image. I'm seemingly successfully completing a TFTPDNLD each time, but it keeps rebooting with the cannot find image in \ error.
Here is a detailed snap shot:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
#1- I TFTP image to device which automatically starts the output below:
ENABLING IO-APIC IRQs
Setting 14 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 14 ... ok.
Setting 13 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 13 ... ok.
..TIMER: vector=0x31 pin1=2 pin2=0
testing the IO APIC.......................
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3000.1599 MHz.
..... host bus clock speed is 200.0105 MHz.
cpu: 0, clocks: 2000105, slice: 1000052
CPU0<T0:2000096,T1:1000032,D:12,S:1000052,C:2000105>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xff648, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 16
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B2,I1,P0) -> 18
PCI->APIC IRQ transform: (B3,I1,P0) -> 24
PCI->APIC IRQ transform: (B3,I2,P0) -> 24
PCI->APIC IRQ transform: (B3,I2,P1) -> 25
PCI->APIC IRQ transform: (B3,I3,P0) -> 26
PCI->APIC IRQ transform: (B3,I3,P1) -> 27
PCI->APIC IRQ transform: (B4,I2,P0) -> 16
PCI->APIC IRQ transform: (B4,I3,P0) -> 17
PCI: Cannot allocate resource region 0 of device 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
keyboard: controller not found
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SER
IAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 30720K size 1024 blocksize
loop: loaded (max 8 devices)
lpc: version 0.1 (Mar 4 2005)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: TOQHIBA THLCD512MBA, CFA DISK drive
hdb: QalDisi QDAF@-510, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
Partition check:
hda: hda1 hda2 hda3 hda4
hdb: hdb1 hdb2 hdb3 hdb4
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
i2c-core.o: i2c core module version 2.8.7 (20040611)
i2c-dev.o: i2c /dev entries driver module version 2.8.7 (20040611)
i2c-proc.o version 2.8.7 (20040611)
i2c-i801 version 2.8.7 (20040611)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 26522k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 136k freed
init started: EXT2-fs warning: checktime reached, running e2fsck is recommended
BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
init started: BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
Starting pid 10, console /dev/ttyS0: '/etc/init.d/rcS'
Recovery version 1.13
Started on Sun Mar 7 05:17:41 UTC 2010
Full system recovery
A
Please press Enter to activate this console.
tarting pid 86, console /dev/ttyS0: '/bin/sh'
BusyBox v1.00-rc1 (2005.03.04-09:39+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
#2- I’m not a unix/linux person so I don’t have the knowledge to fix the “hdx” errors above, so after reboot it goes to “rommon”
Booting system, please wait...
CISCO SYSTEMS
Embedded BIOS Version 1.0(10)0 03/25/05 22:42:05.25
Low Memory: 631 KB
High Memory: 3968 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 2578 Host Bridge
00 01 00 8086 2579 PCI-to-PCI Bridge
00 03 00 8086 257B PCI-to-PCI Bridge
00 1C 00 8086 25AE PCI-to-PCI Bridge
00 1D 00 8086 25A9 Serial Bus 11
00 1D 01 8086 25AA Serial Bus 10
00 1D 04 8086 25AB System
00 1D 05 8086 25AC IRQ Controller
00 1D 07 8086 25AD Serial Bus 9
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 25A1 ISA Bridge
00 1F 02 8086 25A3 IDE Controller 11
00 1F 03 8086 25A4 Serial Bus 5
00 1F 05 8086 25A6 Audio 5
02 01 00 8086 1075 Ethernet 11
03 01 00 177D 0003 Encrypt/Decrypt 9
03 02 00 8086 1079 Ethernet 9
03 02 01 8086 1079 Ethernet 9
03 03 00 8086 1079 Ethernet 9
03 03 01 8086 1079 Ethernet 9
04 02 00 8086 1209 Ethernet 11
04 03 00 8086 1209 Ethernet 5
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(10)0) #0: Fri Mar 25 23:02:10 PST 2005
Platform IPS-4255-K9
Management0/0
Link is UP
MAC Address: 000f.f775.7e24
Use ? for help.
rommon #0>
#3- If the TFTP is rerun the entire cycle starts again.The IPS 4255 sensor appliance has only a single 512 MB internal CompactFlash module for storage by-default, so this part of the output you posted is interesting:
hda: TOQHIBA THLCD512MBA, CFA DISK drive
hdb: QalDisi QDAF@-510, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
As it appears that two (2) 256 MB ("248 MB") storage devices are being detected (despite the model of the first even containing "512MB" in its name).
I'd recommend double-checking that there is nothing installed in the "External compact flash device" slot located on the back of the appliance. See here for reference: http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_installing_4240_4255.html#wp2726
If there is a CompactFlash module installed there, eject and remove it, then power-cycle the appliance and attempt the re-image ("recovery") process once more. If the boot output still contains the same errors for hda and hdb, then it is probably a failing/failed CompactFlash module, so an RMA will likely be necessary to resolve. -
Dreamweaver reports file "not found" when attempting to open files from SMB server...
User's work-files are hosted on a Windows Server 2003 SP2 volume accessed via SMB. She's been opening and saving the files from the server successfully in Dreamweaver for years from other Macs running Dreamweaver CS4.
Now she has an iMac running 10.7.4 and Dreamweaver CS6... and it's not the SMB problem you'd expect.
She mounts the server volume. She opens and saves files normally with full r/w permissions from any app... except Dreamweaver. For any file that she attempts to open in Dreamweaver -- whether from the Finder or from within Dreamweaver -- Dreamweaver pops up an alert reporting that the file at the file-path was not found. The same file is easily accessible from other apps and from the Finder. She continues to have full read/write access to the shared volume.
Local copies of the files do not have the problem. It only affects files hosted on the server and it only happens in Dreamweaver.
So, I create a new user account and everything works fine... The user mounts the sharepoint, opens a file with Dreamweaver... perfectly normal. Then she quits Dreamweaver and relaunches it... everything's fine. Repeatedly. It all works normally. She quits Dreamweaver and unmounts the share, then she mounts the share again and tries to open a file in Dreamweaver again... and it reports that the file was not found.
This is reproducible: If the server volume has been mounted and unmounted repeatedly under any user account, that triggers the error which continues occurring under that user account from that point on. A restart will not fix it. A safe-boot will not fix it. (In fact, restarting seems to trigger the problem by unmounting the volume.)
I tried trashing the entire contents of the ~/Library folder in one of the test-user accounts. It doesn't fix the problem. Once it strikes a user account, the only temporary fix seems to be using a new user account. And that's like a ticking time bomb just waiting for the problem to pop up again.
Any ideas?
TIA!!I've seen on two computers so far. Looking at the mount point under unix, the share is being mounted at two different locations. This is normal behaviour for Macs when you mount two different shares with the same name.
From terminal I run:
df
Which returns something like
/dev/disk0s2 1951845952 224463456 1726870496 12% /
devfs 360 360 0 100% /dev
map -hosts 0 0 0 100% /net
map auto_home 0 0 0 100% /home
//[email protected]/website 204360384 38067872 166292512 19% /Volumes/website
//[email protected]/website 204360384 38067872 166292512 19% /Volumes/website-1
map -fstab 0 0 0 100% /Network/Servers
Notice that the share "website" has been mounted once as website, and again as website-1. This is the underlying unix name for the share, which is how most programs (99% sure including Adobe suite products) will reference files. So, if it thinks that the file is at /Volumes/website/site/index.html but can only see /Volumes/website-1/ then it doesn't know what to do.
The confusion arises because both will show in Finder as "website". Even more annoying is that Finder does not always unmount shares correctly, so that /Volumes/website might not be accessible but /Volumes/website-1 will be. As far as the user is concerned, the share "website" is still mounted, but as far as Dreamweaver is concerned, it isn't, although website-1 is.
It's the same share, same data, but is being referenced by different names, so does not seem accessible.
BUT
I don't have a solution yet, apart from force unmounting both (or rebooting), remounting, and checking that Dreamweaver is using the right share (perhaps by removing and readding from within Dreamweaver).
Tedious. -
[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'
$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55) -
HP DV6700 Operating System Not Found- How Can I Access & Back Up Files?
1. HP Pavillon DV6700 -> old yes, I know
2. Operating System: Vista
3. Black Screen -> Err2Err3 Operating System Not Found
I ran the Primary Hard Drive Self Test > Hard Disk Self Test and it was a quick test. After it finished it came back with "#10009- Replace Hard Disk"
My question is: I've been tring to make this laptop last for as long as possible (obviously considering I was still using Vista). I plan to trash this laptop, but I need to know somehow, some way to access my files. There are pictures and essays that I absolutely need and I didn't do any back up in the last 2 months.
Please any suggestions!Yes use a usb to SATA adapter:
http://www.amazon.com/Patuoxun-Converter-Adapter-Cable-Drive/dp/B008ASF5MC/ref=sr_1_3?ie=UTF8&qid=13...
That one is very inexpensive on amazon.com. Connect the SATA hard drive to the adapter (after removing the drive from the laptop) and plug the usb connectors into two usb ports on any other computer running XP or greater. The laptop drive will (if you are lucky) mount as a lettered drive on the host computer and you can copy and paste files off the drive with Windows Explorer file browser. -
"Client error not found" = DOOOOOOOOMMMMMM!!!!!!!
Ok been getting this a lot recently and I think it is to do with my printer setup script. There must be a way to fix it, but for the life of me I can not find the solution.
It usually starts with all printers on the system being paused. You can unpause them, but as soon as you try print they automatically pause again.
You can reset the print system, but when you try readd a printer you get the message of doom "client-error-not-found".
From then on I can not add any printer to the system and the only fix is a wipe and reinstall.
I mentioned above that I use a printer script to install the 10+ printers in the office onto the 80+ machines. All the machines are running 10.5 and upto date.
I have put the script to have a look at, but even if it is causing the problem there should be a way to fix the issue.
#Reset print system.
do shell script "lpstat -p | cut -d' ' -f2 | xargs -I{} lpadmin -x {}" with administrator privileges
#log onto the server and mounts the IT_support folder. If the IT_support folder is already mounted it will skip the mount and move on.
if {"IT_support"} is not in paragraphs of (do shell script "/bin/ls /Volumes") then
mount volume "afp://192.168.1.251/IT_support"
end if
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/drivers/* /Library/printers/PPDs/Contents/Resources/" with administrator privileges
#Add the printers to the system.
#Colour Printers.
#Colour_Printroom Appletalk.
do shell script "lpadmin -p Colour_PrintRoom -L FirstFloorPrintRoom -E -v pap://*/Colour_PrintRoom/LaserWriter -P /Library/printers/PPDs/Contents/Resources/xrx7655.ppd -o printer-is-shared=false" with administrator privileges
#Colour_Kitchen Appletalk.
do shell script "lpadmin -p Colour_Kitchen -L First\\ Floor\\ Kitchen -E -v pap://*/DC3535_DC3535Print/LaserWriter -P /Library/printers/PPDs/Contents/Resources/Xerox\\ DocuColor3535\\ PS -o printer-is-shared=false" with administrator privileges
#BizHub Appletalk.
do shell script "lpadmin -p Colour_BizHub -L Colour_BizHub -E -vpap://*/X3eBizhub45035C-KMPrint/LaserWriter -P /Library/printers/PPDs/Contents/Resources/en.lproj/Fiery\\ X3eTY\\ 35C-KM\\ PS\\ v2.01\\ eu -o printer-is-shared=false" with administrator privileges
#Admin Printers.
#Reception Bonjour.
do shell script "lpadmin -p Reception -L Ground\\ Floor\\ Reception -E -v mdns://Reception%20%2892%3A1b%3A58%29.pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#A3_Northside Bonjour.
do shell script "lpadmin -p A3_Northside -L First\\ Floor\\ North\\ Side -E -v mdns://A3Northside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#A3_Southside Bonjour.
do shell script "lpadmin -p A3_Southside -L First\\ Floor\\ South\\ Side -E -v mdns://A3Southside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#Studio3_Admin Bonjour.
do shell script "lpadmin -p Studio3_Admin -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Studio1_Admin Bonjour.
do shell script "lpadmin -p Studio1_Admin -L First\\ Floor\\ Studio\\ 1 -E -v mdns://Studio1Admin%20%2892%3A41%3Af6%29._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#Studio3_A3 Bonjour.
do shell script "lpadmin -p Studio3_A3 -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3A3._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ LaserJet\\ 5100\\ Series.gz -o printer-is-shared=false" with administrator privileges
#Plotters.
#PlotterDeathstarHP4500ps Bonjour.
do shell script "lpadmin -p PlotterDeathStarHP4500ps -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterDeathstar_HP4500ps._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ Designjet\\ 4500\\ PS3.gz -o printer-is-shared=false" with administrator privileges
#PlotterPosterEpson7600 Bonjour.
do shell script "lpadmin -p PlotterPosterEpson7600 -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterPosterEpson7600.printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/en.lproj/stp-escp2-7600.5.2.ppd.gz -o printer-is-shared=false" with administrator privileges
#Copy a fresh copy of the printer driver settings back onto the system after the printers have been installed. driver settings are stored in /etc/cups/PPD admin rights required to copy files into this folder
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/ppd/* /etc/cups/PPD" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences" with administrator privileges
#The following printer is added into the system speratly due to a driver selection issue when adding more than one Xerox Phaser 4510DT. The system seems to apply the correct driver to the first one that is added to the system. The second Xerox Phaser 4510DT does not get the correct driver applied to it.
#Studio2_Admin Bonjour.
do shell script "lpadmin -p Studio2_Admin -L First\\ Floor\\ Studio\\ 2 -E -v mdns://Studio2Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences"
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04_Printers/PrinterAutoInstall/ppd/Studio2Admin.ppd /etc/cups/PPD/" with administrator privileges
#Reset file permissions
do shell script "chmod 664 /Library/Printers/PPDs/Contents/Resources/*" with administrator privilegesWell, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ... -
[SOLVED] Kernel panic at boot due to root FS not found
When I try to boot using a new kernel version (eg. 3.0.1 or 2.6.39), I get a kernel panic with an "init not found" error message. I haven't been able to get any more detailed error messages, but I assume that there's a problem with finding or mounting my root filesystem.
For now, I'm stuck with 2.6.38.7-1, which boots without any problems. (I keep trying the new kernel, then rolling it back using a Live CD.)
I have a shared EXT4 root and boot partition, and I'm using Grub 0.97. Other than that, I'm not sure what information would be helpful in tracking down this problem, and any help would be appreciated.
Last edited by dcecile (2011-08-10 00:41:46)No problem.
Here's my full Grub. It has a lot of trial-and-error entries, and I made *-old copies of my 2.6.38 kernel files:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 2
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
title Arch Linux
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/initramfs-linux.img
title Arch Linux Fallback
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/initramfs-linux-fallback.img
title Arch Linux Ext4
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/initramfs-linux-ext4.img
title Arch Linux Log
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /boot/initramfs-linux.img
title Arch Linux Break
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro rootwait break=y panic=30 vga=0x318
initrd /boot/initramfs-linux.img
title Arch Linux Nonboot Log
root (hd0,2)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /initramfs-linux.img
title Arch Linux Baduuid Log
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/1ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /boot/initramfs-linux.img
title Arch Linux LTS
root (hd0,2)
kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-lts.img
title Arch Linux LTS Fallback
root (hd0,2)
kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-lts-fallback.img
title Arch Linux LTS Log
root (hd0,2)
kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /boot/kernel26-lts.img
title Arch Linux Old
root (hd0,2)
kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-old.img
title Arch Linux Old Fallback
root (hd0,2)
kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-old-fallback.img
title Arch Linux Old Log
root (hd0,2)
kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
initrd /boot/kernel26-old.img
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
This is the 3.0 entry that doesn't work:
title Arch Linux
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/initramfs-linux.img
And this is the 2.6.38 entry that does work:
title Arch Linux Old
root (hd0,2)
kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
initrd /boot/kernel26-old.img
Here's "lsinitcpio /boot/initramfs-linux.img":
./etc
./etc/udev
./etc/udev/udev.conf
./etc/modprobe.d
./etc/modprobe.d/usb-load-ehci-first.conf
./init
./init_functions
./bin
./bin/busybox
./sys
./proc
./dev
./hooks
./hooks/udev
./run
./config
./usr
./usr/bin
./usr/sbin
./lib
./lib/udev
./lib/udev/usb_id
./lib/udev/firmware
./lib/udev/scsi_id
./lib/udev/path_id
./lib/udev/ata_id
./lib/udev/rules.d
./lib/udev/rules.d/50-udev-default.rules
./lib/udev/rules.d/80-drivers.rules
./lib/udev/rules.d/50-firmware.rules
./lib/udev/rules.d/60-persistent-storage.rules
./lib/modules
./lib/modules/3.0-ARCH
./lib/modules/3.0-ARCH/modules.alias.bin
./lib/modules/3.0-ARCH/modules.symbols.bin
./lib/modules/3.0-ARCH/kernel
./lib/modules/3.0-ARCH/kernel/fs
./lib/modules/3.0-ARCH/kernel/fs/ext4
./lib/modules/3.0-ARCH/kernel/fs/ext4/ext4.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/mbcache.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/jbd2
./lib/modules/3.0-ARCH/kernel/fs/jbd2/jbd2.ko.gz
./lib/modules/3.0-ARCH/kernel/sound
./lib/modules/3.0-ARCH/kernel/sound/core
./lib/modules/3.0-ARCH/kernel/sound/core/seq
./lib/modules/3.0-ARCH/kernel/sound/core/seq/snd-seq-device.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/snd.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/snd-rawmidi.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/soundcore.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers
./lib/modules/3.0-ARCH/kernel/drivers/ata
./lib/modules/3.0-ARCH/kernel/drivers/ata/libata.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/ahci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/libahci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb
./lib/modules/3.0-ARCH/kernel/drivers/usb/core
./lib/modules/3.0-ARCH/kernel/drivers/usb/core/usbcore.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/uhci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ehci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight/lcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/fb_sys_fops.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysimgblt.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/syscopyarea.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysfillrect.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/input
./lib/modules/3.0-ARCH/kernel/drivers/input/ff-memless.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi
./lib/modules/3.0-ARCH/kernel/drivers/scsi/sd_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ezkey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sjoy.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gyration.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-samsung.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-lcpower.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kye.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-dr.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-wacom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-keytouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-uclogic.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cherry.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zpff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-elecom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-common.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-waltop.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-picolcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-twinhan.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-emsff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sunplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-apple.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-topseed.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-chicony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-magicmouse.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cypress.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kensington.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kone.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-axff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-multitouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-logitech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-petalynx.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-prodikeys.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid/usbhid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zydacron.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gaff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-microsoft.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-monterey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ntrig.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-belkin.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-pl.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-a4tech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ortek.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-quanta.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-tmff.ko.gz
./lib/modules/3.0-ARCH/kernel/lib
./lib/modules/3.0-ARCH/kernel/lib/crc16.ko.gz
./lib/modules/3.0-ARCH/modules.dep.bin
./sbin
./sbin/blkid
./sbin/udevadm
./sbin/modprobe
./sbin/udevd -
TP Agreement Not Found -- OAGIS XML document over AS2
Hi,
I am getting TP Agreement not found error while receiving OAGIS XML document over AS2. Below is error message.
Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND
I am not sure why it says null-INBOUND. It appears like it is not able to identify Document Version. DOCTYPE_REVISION=7.2.1 is being passed in the AS2 transport headers but still it does not recognize the version.
I am not sure what is missing. Please give some ideas hints.
Below is the Business Message:----
Id AC12149513F1F78141400000E7DEDE00
Message Id AC12149513F1F78136200000E7DED800
Refer To Message Refer To Message
Sender Type AS2 Identifier
Sender Value SOALocal
Receiver Type AS2 Identifier
Receiver Value PowellIndustries
Sender SOALocal
Receiver Powell
Agreement Id
Agreement
Document Type PROCESS_INVOICE_002
Document Protocol OAG
Document Version 7.2.1
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 06/07/2013 11:28:49 AM
Receive Time Stamp 06/07/2013 11:28:50 AM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)
Document Remaining Retry(Agreement)
Native Message Size 10788
Translated Message Size
Business Action Name
Business Transaction Name
Xpath Name1
Xpath Value1
Xpath Expression1
Xpath Name2
Xpath Value2
Xpath Expression2
Xpath Name3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
Correlation To XPath Value
Correlation To XPath Expression
Wire Message Wire Message
Application Message Application Message
Payload Storage Payload Storage
Attachment Attachment
Label
Collaboration Id AC12149513F1F7813BF00000E7DEDB00
Collabration Name
Collabration Version
Business Action Name
Exchange Protocol Name AS2
Exchange Protocol Version 1.1
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code B2B-50547
Error Description Machine Info: (pwl.pri) Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Below is the Wire Message:----
Id AC12149513F1F78115400000E7DED600
Message Id AC12149513F1F78115400000E7DED600
Business Message AC12149513F1F78141400000E7DEDE00
Packed Message Packed Message
Payload Payload
Protocol Message Id <38383939373331343630313931303737@SOALocal>
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding ChannelName=SOALocal dcID=CHANNEL_nlzbB-7511847722850817684 AS2-To=PowellIndustries DOCTYPE_NAME=PROCESS_INVOICE_002 TE=trailers, deflate, gzip, compress DOCTYPE_REVISION=7.2.1 Date=Fri, 07 Jun 2013 16:28:49 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=SOALocal url=http://pwl.pri/b2b/transportServlet Content-Transfer-Encoding=binary Message-ID=<38383939373331343630313931303737@SOALocal> Content-type=application/pkcs7-mime; smime-type="enveloped-data" MSG_RECEIVED_TIME=Fri Jun 07 11:28:49 CDT 2013 ECID-Context=1.71b9d2a41e5aaef0:-10db6371:13f1ee6cb74:-8000-000000000000276d;khvE MIME-version=1.0 tpName=PowellIndustries User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Length=13663 Host=pwl.pri:8001 Connection=close, TE useProxy=false From=SOALocal additionalHeaders=DOCTYPE_NAME=PROCESS_INVOICE_002#DOCTYPE_REVISION=7.2.1
Message Digest Message Digest
Digest Algorithm md5
Transport Protocol HTTP
Transport Protocol Version 1.1
Url http://pwl.pri:8001/b2b/transportServlet
security
Transport Headers ChannelName=SOALocal dcID=CHANNEL_nlzbB-7511847722850817684 AS2-To=PowellIndustries DOCTYPE_NAME=PROCESS_INVOICE_002 TE=trailers, deflate, gzip, compress DOCTYPE_REVISION=7.2.1 Date=Fri, 07 Jun 2013 16:28:49 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=SOALocal url=http://pwl.pri:8001/b2b/transportServlet Content-Transfer-Encoding=binary Message-ID=<38383939373331343630313931303737@SOALocal> Content-type=application/pkcs7-mime; smime-type="enveloped-data" MSG_RECEIVED_TIME=Fri Jun 07 11:28:49 CDT 2013 ECID-Context=1.71b9d2a41e5aaef0:-10db6371:13f1ee6cb74:-8000-000000000000276d;khvE MIME-version=1.0 tpName=PowellIndustries User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Length=13663 Host=pwl.pri:8001 Connection=close, TE useProxy=false From=SOALocal additionalHeaders=DOCTYPE_NAME=PROCESS_INVOICE_002#DOCTYPE_REVISION=7.2.1
certificates certificates
State ERROR
Reattempt Count
Error Code B2B-50547
Error Description Machine Info: (pwl.pri) Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Error Text Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
exchangeRetryInterval
exchangeRemainingRetry
Message Size 10788
Thanks
Ismail M.Hi Anuj,
Here is the payload from the wire message. We are using 11.1.1.6.0
<?xml version = '1.0' encoding = 'UTF-8'?>
<PROCESS_INVOICE_002 xmlns="http://www.openapplications.org/171_process_invoice_002">
<CNTROLAREA xmlns="">
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="INVOICE">INVOICE</NOUN>
<REVISION value="002">002</REVISION>
</BSR>
<SENDER>
<LOGICALID>POWELLIND</LOGICALID>
<COMPONENT>B2B</COMPONENT>
<TASK/>
<REFERENCEID/>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>ENG</LANGUAGE>
<CODEPAGE/>
<AUTHID>oracle B2B</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION">
<YEAR/>
<MONTH/>
<DAY/>
<HOUR/>
<MINUTE/>
<SECOND/>
<SUBSECOND/>
<TIMEZONE/>
</DATETIME>
</CNTROLAREA>
<DATAAREA xmlns="">
<PROCESS_INVOICE>
<INVHEADER>
<AMOUNT qualifier="DOCUMENT" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<DATETIME qualifier="DOCUMENT" index="1">
<YEAR>2013</YEAR>
<MONTH>03</MONTH>
<DAY>15</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0500</TIMEZONE>
</DATETIME>
<DOCUMENTID>1000182</DOCUMENTID>
<DESCRIPTN/>
<DOCTYPE/>
<PAYMETHOD/>
<REASONCODE/>
<USERAREA/>
<PARTNER>
<NAME index="1">Powell US Operating Unit</NAME>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1">Powell US Operating Unit</NAME>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<CONTACT>
<NAME index="1">No Sales Credit</NAME>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">PO Box 843823, Dallas, Dallas, TX, 75284-3823, United States</NAME>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>RemitTo</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1">PO Box 843823, Dallas, Dallas, TX, 75284-3823, United States</NAME>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<ADDRESS>
<ADDRLINE index="1">PO Box 843823</ADDRLINE>
<ADDRTYPE/>
<CITY>Dallas</CITY>
<COUNTRY>United States</COUNTRY>
<COUNTY>Dallas</COUNTY>
<DESCRIPTN/>
<FAX index="1"/>
<POSTALCODE/>
<REGION/>
<STATEPROVN>TX</STATEPROVN>
<TAXJRSDCTN/>
<TELEPHONE index="1"/>
<URL/>
<USERAREA/>
</ADDRESS>
<CONTACT>
<NAME index="1"/>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1"/>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>Carrier</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1"/>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<ADDRESS>
<ADDRLINE index="1"/>
<ADDRTYPE/>
<CITY/>
<COUNTRY/>
<COUNTY/>
<DESCRIPTN/>
<FAX index="1"/>
<POSTALCODE/>
<REGION/>
<STATEPROVN/>
<TAXJRSDCTN/>
<TELEPHONE index="1"/>
<URL/>
<USERAREA/>
</ADDRESS>
<CONTACT>
<NAME index="1"/>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<DOCUMNTREF>
<DOCTYPE>INV</DOCTYPE>
<DOCUMENTID>10005:21009</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<DESCRIPTN/>
<DOCUMENTRV/>
<LINENUM/>
<NOTES index="1"/>
<SCHLINENUM/>
<SUBLINENUM/>
<USERAREA/>
</DOCUMNTREF>
<INVTAX>
<AMOUNT qualifier="TAX" type="T" index="1">
<VALUE>413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<AMOUNT qualifier="TAXBASE" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<QUANTITY qualifier="PERCENT">
<VALUE/>
<NUMOFDEC/>
<SIGN/>
<UOM/>
</QUANTITY>
<DESCRIPTN/>
<LINENUM/>
<TAXCODE/>
<TAXJRSDCTN/>
<USERAREA/>
</INVTAX>
<PYMTTERM>
<AMOUNT qualifier="DISCNT" type="T" index="1">
<VALUE/>
<NUMOFDEC/>
<SIGN/>
<CURRENCY/>
<DRCR/>
</AMOUNT>
<DATETIME qualifier="DISCNT" index="1">
<YEAR/>
<MONTH/>
<DAY/>
<HOUR/>
<MINUTE/>
<SECOND/>
<SUBSECOND/>
<TIMEZONE/>
</DATETIME>
<DATETIME qualifier="DUE" index="1">
<YEAR>2013</YEAR>
<MONTH>04</MONTH>
<DAY>14</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0500</TIMEZONE>
</DATETIME>
<DATETIME qualifier="PYMTTERM" index="1">
<YEAR>1952</YEAR>
<MONTH>01</MONTH>
<DAY>01</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0600</TIMEZONE>
</DATETIME>
<DESCRIPTN>Net Due in 30 Days</DESCRIPTN>
<TERMID>30 NET</TERMID>
<USERAREA>
<AMOUNT qualifier="TOTAL" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY/>
<DRCR>D</DRCR>
</AMOUNT>
</USERAREA>
</PYMTTERM>
</INVHEADER>
<INVLINE>
<AMOUNT qualifier="EXTENDED" type="T" index="1">
<VALUE>50</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<CURRENCY/>
<DRCR>D</DRCR>
</AMOUNT>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>5</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<CURRENCY/>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM/>
</OPERAMT>
<QUANTITY qualifier="ITEM">
<VALUE>10</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<UOM/>
</QUANTITY>
<LINENUM>1</LINENUM>
<DESCRIPTN>11GA SHEET STEEL HOT ROLLED-PICKLED-OILED COMMERCIAL QUALITY.</DESCRIPTN>
<ITEM>11GA SHEET STEEL HOT ROLLED-PICKLED-OILED COMMERCIAL QUALITY.</ITEM>
<ITEMTYPE/>
<ITEMX>11HRPO</ITEMX>
<OPENITEM/>
<PROJACTVTY/>
<UNIT>LB</UNIT>
<UPC/>
<USERAREA/>
<DOCUMNTREF>
<DOCTYPE>LINE</DOCTYPE>
<DOCUMENTID>10005:21009:19019</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<DESCRIPTN/>
<USERAREA/>
</DOCUMNTREF>
<DOCUMNTREF>
<DOCTYPE>SalesOrder</DOCTYPE>
<DOCUMENTID>600813</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE/>
<DESCRIPTN/>
<USERAREA/>
</DOCUMNTREF>
<DOCUMNTREF>
<DOCTYPE>PurchaseOrder</DOCTYPE>
<DOCUMENTID>TEST123</DOCUMENTID>
<PARTNRID>N/A</PARTNRID>
<PARTNRTYPE>Customer</PARTNRTYPE>
<DESCRIPTN/>
<DOCUMENTRV/>
<LINENUM/>
<SCHLINENUM/>
</DOCUMNTREF>
</INVLINE>
</PROCESS_INVOICE>
</DATAAREA>
</PROCESS_INVOICE_002> -
I published a 35 photo web gallery I thought successfully, but when I go to the url listed at the top of the photo event folder, I get a web site not found error. The photos did upload to the iDisk in the "sites" folder, but it would apppear no web page was created.. there is a web gallery icon to the right of the photo album name that was uploaded.. I have upgraded my iPhoto with the latest ver via software update.. any thoughts??
Welcome to the Apple Discussions. Try making some minor change to the gallery and republish. See if that will jump start the online gallery. If that doesn't work, mount the iDisk, go to the Web/Sites folder and delete the contents of the _gallery folder (assuming you only have one gallery). Then republish again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
./lsnrctl start effort- Message 1070 not found;
Message 1070 not found; No message file for product=network, facility=TNSTNS-125 error when trying to start the DB listiner?
oracle@linuxsrv:/u01/app/oracle/OraHome/bin> ./lsnrctl start
LSNRCTL for Linux: Version 10.1.0.4.2 - Production on 16-JUN-2009 17:16:15
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNS-125 45: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facili ty=TNS
TNS-00515: Message 515 not found; No message file for product=network, facilit y=TNS
Linux Error: 2: No such file or directory
oracle@linuxsrv:/u01/app/oracle/OraHome/bin>
OAS environment settings
LESS=-M -I
MACHTYPE=i686-suse-linux
LOGNAME=oracle
XDG_DATA_DIRS=/usr/share:/etc/opt/kde3/share:/opt/kde3/share
LESSOPEN=lessopen.sh %s
INFOPATH=/usr/local/info:/usr/share/info:/usr/info
ORA_NLS33=/u01/app/oracle/as10gHome/lib:/u01/app/oracle/bin:/u01/app/oracle:/u01/app/midtier:/u01/app/midtier/bin:/u01/app/midtier/as10gHome/opmm/lib:/OraHome/lib:/OraHome/opmn/lib/nls/admin/data
DISPLAY=192.168.2.9:0.0
ORACLE_HOME=/u01/app/oracle/as10gHome/lib:/u01/app/oracle/bin:/u01/app/oracle:/u01/app/midtier:/u01/app/midtier/bin:/u01/app/midtier/as10gHome/opmm/lib:/OraHome/lib:/OraHome/opmn/lib
LESSCLOSE=lessclose.sh %s %s
G_BROKEN_FILENAMES=1
COLORTERM=1
_=/usr/bin/env
OLDPWD=/u01/app/oracle/OraHome
oracle@linuxsrv:/u01/app/oracle/OraHome/bin> vi /home/oracle/.bash_profile
TMP=/usr/tmp
DISPLAY=192.168.2.9:0.0
ORACLE_BASE=/u01/app/oracle
ORACLE_MID=/u01/app/midtier
#ORACLE_OCA=/u01/app/OCA
LD_LIBRARY_PATH=$ORACLE_BASE/OraHome/opmn/lib:$ORACLE_BASE/OraHome/lib:$ORACLE_MID/as10gHome/opmn/lib:$ORACLE_MID/as10gHome/lib:$PATH
ORACLE_HOME=$ORACLE_BASE/as10gHome/lib:$ORACLE_BASE/bin:$ORACLE_BASE:$ORACLE_MID:$ORACLE_MID/bin:$ORACLE_MID/as10gHome/opmm/lib:$ORACLE_HOME/OraHome/lib:$ORACLE_HOME/OraHome/opmn/lib
ORACLE_SID=orcl
LISTENER=$ORACLE_HOME/bin/lsnrctl
TNS_ADMIN=$ORACLE_HOME/network/admin
ORA_NLS33=$ORACLE_HOME/nls/admin/data
PATH=/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:$ORACLE_HOME/bin:$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin/$ORACLE_HOME/lib:$PATH
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib:$ORACLE_HOME/opmn/lib:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORACLE_HOME/lib:$PATH
export TMP ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_MID ORACLE_OCA LD_LIBRARY_PATH LISTENER DISPLAY PATH TNS_ADMIN ORA_NLS33
Any suggestion in resolving?exit and log back..
oracle@linuxsrv:~> env
LESSKEY=/etc/lesskey.bin
NNTPSERVER=news
INFODIR=/usr/local/info:/usr/share/info:/usr/info
MANPATH=/usr/local/man:/usr/share/man:/opt/dx/man
HOSTNAME=linuxsrv
XKEYSYMDB=/usr/share/X11/XKeysymDB
HOST=linuxsrv
SHELL=/bin/bash
TERM=xterm
PROFILEREAD=true
HISTSIZE=1000
LISTENER=/u01/app/oracle/as10gHome/bin/lsnrctl
ORACLE_MID=/u01/app/midtier
GNOME_PATH=:/usr
MORE=-sl
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/OraHome/opmn/lib:/u01/app/oracle/OraHome/lib:/u01/app/midtier/as10gHome/opmn/lib:/u01/app/midtier/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/u01/app/oracle/as10gHome/lib:/u01/app/oracle/as10gHome/opmn/lib:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin:/u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin//u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
LS_COLORS=no=00:fi=00:di=01;34:ln=00;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=41;33;01:ex=00;32:*.cmd=00;32:*.exe=01;32:*.com=01;32:*.bat=01;32:*.btm=01;32:*.dll=01;32:*.tar=00;31:*.tbz=00;31:*.tgz=00;31:*.rpm=00;31:*.deb=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.lzma=00;31:*.zip=00;31:*.zoo=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.tb2=00;31:*.tz2=00;31:*.tbz2=00;31:*.xz=00;31:*.avi=01;35:*.bmp=01;35:*.fli=01;35:*.gif=01;35:*.jpg=01;35:*.jpeg=01;35:*.mng=01;35:*.mov=01;35:*.mpg=01;35:*.pcx=01;35:*.pbm=01;35:*.pgm=01;35:*.png=01;35:*.ppm=01;35:*.tga=01;35:*.tif=01;35:*.xbm=01;35:*.xpm=01;35:*.dl=01;35:*.gl=01;35:*.wmv=01;35:*.aiff=00;32:*.au=00;32:*.mid=00;32:*.mp3=00;32:*.ogg=00;32:*.voc=00;32:*.wav=00;32:
ORACLE_SID=orcl
XNLSPATH=/usr/share/X11/nls
ENV=/etc/bash.bashrc
ORACLE_BASE=/u01/app/oracle
HOSTTYPE=i386
FROM_HEADER=
PAGER=less
CSHEDIT=emacs
XDG_CONFIG_DIRS=/etc/xdg
MINICOM=-c on
TNS_ADMIN=/u01/app/oracle/as10gHome/network/admin
GNOMEDIR=/usr
MAIL=/var/spool/mail/oracle
PATH=/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin//u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
CPU=i686
INPUTRC=/etc/inputrc
PWD=/home/oracle
LANG=en_US.UTF-8
PYTHONSTARTUP=/etc/pythonstart
QT_SYSTEM_DIR=/usr/share/desktop-data
SHLVL=1
HOME=/home/oracle
LESS_ADVANCED_PREPROCESSOR=no
OSTYPE=linux
LS_OPTIONS=-N --color=tty -T 0
XCURSOR_THEME=DMZ
WINDOWMANAGER=/usr/bin/startkde
TMP=/usr/tmp
G_FILENAME_ENCODING=@locale,UTF-8,ISO-8859-15,CP1252
LESS=-M -I
MACHTYPE=i686-suse-linux
LOGNAME=oracle
XDG_DATA_DIRS=/usr/share:/etc/opt/kde3/share:/opt/kde3/share
LESSOPEN=lessopen.sh %s
INFOPATH=/usr/local/info:/usr/share/info:/usr/info
ORA_NLS33=/u01/app/oracle/as10gHome/nls/admin/data
DISPLAY=192.168.2.9:0.0
ORACLE_HOME=/u01/app/oracle/as10gHome
LESSCLOSE=lessclose.sh %s %s
G_BROKEN_FILENAMES=1
COLORTERM=1
_=/usr/bin/env
oracle@linuxsrv:~> -
Networkless install gives "not found in sync db" error
I'm trying to install on a laptop which whose network drivers are not in the install kernel and which doesn't have a cd. All files have to be transferred by usb till I can get it up and running and install the drivers.
I got the machine to boot from the network (pxeboot) and got into the install shell without any problems. On another machine I downloaded the current core iso, mounted it and copied all the packages to a usb disk which I then mounted as /src/arch/pkg on the laptop.
When doing step 2 of the install I got an error that it couldn't find /src/arch/pkg/setup so I created that directory, the errors went away but I then didn't get any packages in the package list. I tried mounting the package disk as /src/arch/pkg/setup and then tried again. This time I got a list of packages. I selected them all and went to step 3.
At this point it tries to access the network to refresh the package database, fails and gives me the error:
error: 'acl-2.2.47': not found in sync db
Looking in VT5 I get
error: failed to retrieve file 'current.db.tar.gz' from : No such file or directory
error: filed to synchronize current: no such file or directory
error: filed to synchronize any databases
Have I done something wrong? Having to create the setup directory feels wrong, I thought I just put the packages in /src/arch/pkg so I'm guessing that that may have something to do with it.
If not, how can I get round this? Can I create a database and drop it on the machine?unselect ABS from the package selection and try again.
Then install the abs package from the completed base install.
Maybe you are looking for
-
Field-symbols as class attribute
Hi Fellas, Is there a way we can define a field-symbols as a class attribute ? My requirement is that i am dynamically constructing a structure at runtime in my model class and binding the component of this structure to my view fields. I am able to c
-
<p>Also what are the limitations in terms of data size or performance related issues while using csv or text file?</p><p>Is it the best practice to use csv , text file to use as a datasource to improve performance?</p><p>Please Advice.... </p><p> </
-
Hi, I had a few single roles assigned to various composite roles. Question: As per my requirement I modified/updated few single roles to include new analysis authorization objects, There is not change in the Composite role assignment only change I ma
-
Error ME 083 if you add outline agreement in a PO
Hello Guru I have a issue when I perform next process: 1. I create a PO with a item with account assignment Q with a WBS element 2. I create an outline agreement with account assignment Q with the same WBS element 2. I modify the PO by ME22N or Bapi
-
ECommerce Product Import Issue - Need HELP!!!!
I'm trying to import 899 products into the ecommerce module but it's taking 6+ hours and I never get a completion message. The import shows as in progress and products do get added/updated but it takes a very long time and I never get a completion m