[Solvd]hd0,gpt1error: file /EFI/Microsoft/Boot/bootmgfw.efi' not found

I'm trying to configure GRUB2 to load Windows 8 on UEFI system.
os-prober does not detect it.
grub-mkconfig creates only for Linux (tried both with mounted and unmounted Windows partition).
So I went for manual entry.
I executed the following
$ mount /dev/sde1 /boot/efi/
$ grub-probe --target=fs_uuid /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
69DB-D2EB
# grub-probe --target=hints_string /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
--hint-bios=hd4,gpt1 --hint-efi=hd4,gpt1 --hint-baremetal=ahci4,gpt1
Created menuentry for /boot/grub/grub.cfg
menuentry "Microsoft Windows 8" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid --hint-bios=hd4,gpt1 --hint-efi=hd4,gpt1 --hint-baremetal=ahci4,gpt1 69DB-D2EB
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
And when I choose it it says
hd0,gpt1error: file /EFI/Microsoft/Boot/bootmgfw.efi' not found
Note that EFI partition is not mounted is fstab (does it make a difference for GRUB?).
Also, specifying
chainloader /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Gives the same not found.
P.S. Windows "fast start" is disabled
Last edited by Doctor Drive (2013-09-29 09:57:25)

Doctor Drive wrote:
Thank you, the.ridikulus.rat.
I just booted back from windows to tell the same.
I just found the solution here
http://unix.stackexchange.com/questions … th-windows
I was configuring according to the ArchWiki.
The ArchWiki was missing that point.
https://wiki.archlinux.org/index.php/GR … I-GPT_Mode
it said
menuentry "Microsoft Windows Vista/7/8 x86_64 UEFI-GPT" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid $hints_string $uuid
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
Just edited the wiki. Thanks!
I initially wrote that section of the wiki (with "--set=root" included), but someone had changed it recently ( https://wiki.archlinux.org/index.php?ti … did=276742 ).
Last edited by the.ridikulus.rat (2013-09-29 10:02:48)

Similar Messages

Build & Capture TS (MDT) - Capture fails at PrepareOS (sysprep) with "Boot Image package not found"

Hi all,
I'm searching for a while on this one now... I'm unable to perform a "ZeroTouch" Build & Capture of my reference machine to get a master image, with Capture Media it seems to be working, but this is a manual step...
While running a W7SP1 Build & Capture task sequence, the "Capture the reference machine" group fails at "PrepareOS". The step before "PrepareOS", "Prepare ConfigMgr Client" runs without any issues.
The only error I can find, shows up in the report "OSD - history of a TS":
... 0005 that is either already released or we have not connected to it.
BootImage::ResolveImageSource( pszPackageId, sImagePackageSourcePath, sImageSourcePath), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\bootimage.cpp,732)
TS::Boot::BootImage::StageBootImage(sPkgID), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\prepareos.cpp,917)
PreStageWINPE(m_bDebug), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\prepareos.cpp,1363)
pCmd->Sysprep(bActivate, bMsd), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\main.cpp,270)
De-Initialization successful
Exiting with error code 2
sending with winhttp failed; 80072ee2
SendResourceRequest() failed. 80072ee2
Download() failed. 80072ee2.
Boot Image package not found.
he system cannot find the file specified. (Error: 80070002; Source: Windows)
Failed to pre-stage WINPE image, hr=0x80070002
Unable to sysprep the machine, hr=80070002
Sysprep'ing the machine failed, hr=80070002
I've searched the smsts.log file hundreds of times for errors, nothing there...
Can anyone give me a clue or just something...? I really don't know what my next step, to make this work, could be...
Thanks!

The error Torsten pointed out gave me some clue... After much digging around on the web, I've stumbled upon this
article which led me into adding the following TS-variables:
SMSTSDownloadRetryCount: 5
SMSTSDownloadRetryDelay: 15
It seems to be working now on all types of hardware...
Case closed, thank you for the assistance!
Let's hope this article can save someone a couple of days... :)
Wesley

SCCM 2012 Matching Processor Architecture Boot Image (0) not found

SCCM2012 SP1 ,One Site, 3DP.
one DP can not install os with PXE boot. when start PXE F12, system crush with code 0x00000f. and Log like this
"00:0C:29:90:D1:C0, 291241B9-AB25-4400-B746-99E018F70F1A: device is in the database. SMSPXE 2014/10/1 2:28:11 4504 (0x1198)
Warning: Matching Processor Architecture Boot Image (0) not found SMSPXE 2014/10/1 2:28:11 4504 (0x1198)"
The BOOT.wim file works well in ither DP.
I have try to redeploment the PXE and reload the Boot.Wim file in this DP, but can not reslove this problem.
I'm afried reset the Boot.wim will take other 2 DP can not work too.
Please Help.

Hi Pazza,
As Torsten said, please ensure that you have an x86 and x64 boot image configured and deployed, regardless of the architecture of the OS that
you wish to deploy. Secondly, ensure that the boot images for both architectures have the network drivers for the respective model that you are imaging injected.
Otherwise, please review the link below:
ConfigMgr PXE Boot Warning: Matching Processor Architecture Boot Image (0) not found
http://www.systemcentercentral.com/configmgr-pxe-boot-warning-matching-processor-architecture-boot-image-0-not-found/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

JB-3300-cfgration file-demo/common/bc4j.xcfg is not found in the classpath.

Frnds,
Doing login application using ADF thru viewobjects and entity objects.Created login page with fileds and backing bean fetching values entered by user, in the same bean trying to get data(from database)thru viewobject ......iam getting this error
javax.faces.el.EvaluationException: oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.ConfigException, msg=JBO-33001: Configuration file /demo/common/bc4j.xcfg is not found in the classpath.
     at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
Caused by: oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.ConfigException, msg=JBO-33001: Configuration file /demo/common/bc4j.xcfg is not found in the classpath.
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:529)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1505)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1482)
code used in bean is:
ApplicationModule appmod = Configuration.createRootApplicationModule("demo.model","LAppModule");
ViewObject vo= appmod.findViewObject("ViewObj1");
pls help me.
Thanks and Regards,
Ashok B.

**LogBeanPage.java**
package project1;
import oracle.adf.model.BindingContext;
import oracle.adf.view.rich.component.rich.RichDocument;
import oracle.adf.view.rich.component.rich.RichForm;
import oracle.adf.view.rich.component.rich.input.RichInputText;
import oracle.adf.view.rich.component.rich.layout.RichPanelFormLayout;
import oracle.adf.view.rich.component.rich.nav.RichCommandButton;
import oracle.adf.view.rich.component.rich.output.RichMessages;
import oracle.binding.BindingContainer;
import oracle.binding.OperationBinding;
public class LoginPage {
private RichCommandButton cb1;
private RichInputText it1;
private RichInputText it2;
private RichPanelFormLayout pfl1;
private RichForm f1;
private RichMessages m1;
private RichDocument d1;
public LoginPage() {
public void setCb1(RichCommandButton cb1) {
this.cb1 = cb1;
public RichCommandButton getCb1() {
return cb1;
public void setIt1(RichInputText it1) {
this.it1 = it1;
public RichInputText getIt1() {
return it1;
public void setIt2(RichInputText it2) {
this.it2 = it2;
public RichInputText getIt2() {
return it2;
public void setPfl1(RichPanelFormLayout pfl1) {
this.pfl1 = pfl1;
public RichPanelFormLayout getPfl1() {
return pfl1;
public void setF1(RichForm f1) {
this.f1 = f1;
public RichForm getF1() {
return f1;
public void setM1(RichMessages m1) {
this.m1 = m1;
public RichMessages getM1() {
return m1;
public void setD1(RichDocument d1) {
this.d1 = d1;
public RichDocument getD1() {
return d1;
public String cb1_action()
String returnStr="error";
System.out.println("Inside loginBtn_action");
BindingContainer bindings=getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("checkLoginCredentails");
Object result = operationBinding.execute();
System.out.println(result);
if (operationBinding.getErrors().isEmpty())
returnStr= "success";
System.out.println("returnStr= " + returnStr);
return returnStr;
private BindingContainer getBindings()
return BindingContext.getCurrent().getCurrentBindingsEntry();
}

Error: Configuration file /model/common/bc4j.xcfg is not found in the classpath???

Hi Everyone,
My Jdev version is 11.1.2.3.0.
I have developed one ADF application and was working very fine.
But the Jdev got crashed so i re-installed the same version but the application which was running earlier is not working now. I tried by installing different versions of Jdevelopers but none seems worked for me.
Error is given below:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Configuration file /model/common/bc4j.xcfg is not found in the classpath.
oracle.jbo.ConfigException: JBO-33001: Configuration file /model/common/bc4j.xcfg is not found in the classpath.
at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:471)
at oracle.jbo.common.ampool.PoolMgr.loadConfiguration(PoolMgr.java:600)
What is this error about?
How can i solve this error t make my application to run?
Please give ur valuable suggestions...
Thanks.

Configuration file bc4j.xcfg not found in the classpath.

Configuration file /dbentities/common/bc4j.xcfg is not found in classpath

Hello,
I used database data control and drag & dropped onto the page.If I clean and build & then run its fetching the data but if run project without build then I get the following exception.
Configuration file /dbentities/common/bc4j.xcfg is not found in the classpath.
Error
java.lang.NullPointerException
<MDSBackingStore> <obtainMetadataObject> Exception while getting mutable object
oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/DbEntities/common/bc4j.xcfg"
I used depreceted method for getting BindingContainer as follows
*public BindingContainer getBindings() {*
FacesContext fc = FacesContext.getCurrentInstance();
Application app = fc.getApplication();
*ValueBinding vb = app.createValueBinding("#{bindings}");*
*return (BindingContainer)vb.getValue(fc);*
Edited by: 925410 on Jul 2, 2012 10:36 PM

Hi,
Open your application module ->configuration then click on the link of bc4j.xcfx
when it is open check the path of your bc4j file which will be show on the title bar when u open the bc4j.xcfx file.
match that path and your error path sourly it will not be match .Now open your project from program file ond copy the bc4j.xcfx and past it here(..../dbentities/common/bc4j.xcfg (at same path where it showed in error )) now again reopen your project then do clean and build all after that your problem will b solved.But carefully the path will have to same as show in your log.

I've Downloaded twice ''Additional Contents'' but the issue is still unresolved ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)

I've Downloaded twice ''Additional Contents'' but the issue is still unresolved ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)
Please Help

"Additional Contents" I don't even know what that is? What app is it for?

Audio file "Male Narrator Noisy#05.aif" not found.

I just spent five hours editing a particularly annoying recording for a client. The project was saved and I was just about to export it when GB crashed. When I re-opened the file, I get this message:
"Audio file “Male Narrator Noisy#05.aif” not found."
This .aif contained 90% of the edits. I've look under the "media" folder inside the .band file and it's not there. I've searched my hard drive, trash, etc, can't find this missing file.
Can anyone tell me if it's recoverable at all or do I need start from scratch?

One thing I learned to do a while back was to avoid editing the original recording. I always create a copy of the original and edit the copy. That way if anything horrible happens (which often does), I have a backup.
In this case I did the following:
1. Right-click on the .band file for the original recording.
2. Select "Show Package Contents".
3. Open up the media folder.
4. In there I found the .aif file which was missing from the copy .band project.
5. I simply pasted that into the media folder for the copy project and PRESTO! all of my edit returned.
Hope that helps and that you have the original file on the hdd.

Audio file "Stw ped v1 024.AIF" not found!

Hi
I created a Logic 9 multy track project on my Mac pro and did save as, then tried to open the project on my Imac which has Logic 9 and LogicX but I get this message 'Audio file “Stw ped v1 024.AIF” not found!' when I open in Logic 9 or X.
I have searched for answers but have not found a difinitve simple answer on how to fix
Can anyone help please

https://discussions.apple.com/thread/3601266?start=0&tstart=0

Publish cloud service fails from Visual Studio 2013 Update 4: Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.

I have a cloud service project with two roles (service and worker). In Visual Studio 2013 Update 4 when I choose "Publish..." from the "Solution Explorer", it opens "Microsoft Azure Activity Log" and quickly terminates.
Here the log:
9:43:47 AM - Applying Diagnostics extension.
9:44:09 AM - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
All works fine when uploading the package and updating from https://manage.windowsazure.com/. It only fails from within Visual Studio.
What can I do to get it working?

I have the same problem with our Azure project. Two web roles (service and worker). Just updated from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD and in doing so, of course directly
move to the new diagnostics version.
Now, I get the same error message in Visual Studio:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
With my small testing project - also two roles (service and worker) - everything is fine. However, I'm looking for a solution to make by existing production service working.
Also the test project shows no Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml,
but this is no problem - so what's the meaning of or solution to this error messages?
What I found so far:
I deployed the Azure project from the same development environment to another Azure test service: Deployment
showed no errors and the service is running fine! So the problem is not with the source, the development environment, library dependencies etc.
Trying Azure cmdlets for PowerShell also work fine for the new service and fails for the production service with almost the same error message:
Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx
I tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced
by a new deployment... So what are possible reasons or fixes for this behaviour?
Best regards,
Andreas

EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)....

The Issue :
The steinway piano. exs can be seen in 'Library/ Application Support/ Logic / sampler instruments / Acoustic pianos - when double click on it ''Can't be open''
c
Same in Garageband & MainStage
When launching Logic pro , Garageband or MainStage : EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)..
After having spoken on phone to a technician (Apple support ) ,i followed his instructions which was to '' Download Additional Contents via the Logic Pro menu:'' ( I've Downloaded twice already) but the issue was unresolved ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)..
Then last night i tried : Via the LOGIC PRO MENU : Click on '' Download Additional Content then select ''Logic Pro & Mainstage Essential Contents'' click install .
It took about 2 hours and finally afterwards when loading song in logic pro ; steinway piano was still there but this time it worked same for Garageband & MainStage.

"Additional Contents" I don't even know what that is? What app is it for?

Error in compiling: file javax\servlet\jsp\PageContext.class not found

Hi,
i'm getting an error when I'm trying to compile an java file. The error is as follows:
cannot access javax.servlet.jsp.PageContext
file javax\servlet\jsp\PageContext.class not found
Isn't the javax package included in jdk? I've installed jdk 1.3.1_03 and j2re1.4.0_02. Shouldn't this PageContext.class be automatically loaded when i've installed jdk?
I'm getting desperated! I've tried almost everything: i've changed the classpath, moved the directory of the java file I'm trying to compile over and over but i'm getting no success!
Any help is very welcome!
Thankx,
Nuno.

hmmm... i had a look and it seems that what you are trying to "import" is actually in a package... instead of import try:
package javax.servlet.jsp;you may need to go download this "package" and complile it in the directory you are working in.
my advice: try the above statement (which does compile for me), if it doesn't work, you will need to find the source code for this package and compile it just like you do any other source code.
hope this helps.

LAPTOP SHOWING BOOT DEVICE IS NOT FOUND.

sir,
my laptop showing BOOT DEVICE IS NOT FOUND. and i didn't get my hp care pack service certificate.
prodect serial number [Personal Information Removed]. PLEASE SENT MY SEVICE CERTIFICATE .

Contact HP Support. If you live in the US/CA, contact HP info Here. If you live in another part of the world, start here>>Contact HP

[SOLVED] Can't boot computer (device not found)

On boot (both Normal and Fallback) I get:
Waiting 10 seconds for device /dev/disk/by-uuid/d3c4f22d-65c6-4e06-bcc1-752db552061
ERROR: device '/dev/disk/by-uuid/d3c4f22d-65c6-4e06-bcc1-752db552061' not found
Skipping fsck
And then it drops to a shell, and I need to use "exit" to run, but it requires me to choose a boot partition (I tried exit /dev/sda1 and others but it says invalid number).
I know there are many posts on that, but since I believe this is a specific issue (I updated kernel last night with -Syyu'd), I decided to make my own.
Any ideas? Thank you in advance.
Last edited by ephan (2012-06-01 18:46:28)

edit: I'm way too slow
ephan wrote:
# mkdir /mnt/arch
# mount /dev/sdaX /mnt/arch (your root partition)
# cd /mnt/arch
# mount -t proc proc proc/
# mount -t sysfs sys sys/
# mount -o bind /dev dev/
# mount /dev/sdaX boot/ (your /boot partition) #This step is not needed if you do not have a separate boot partition
# chroot .
# pacman -Syu udev mkinitcpio
# mkinitcpio -p linux
About that, I have some questions...
1. How long can it take?
2. How dangerous is it?
3. Is it really what I need?
4. Can I lose files? Since I can't boot, is there a way to save them?
5. In order to find out what my root partition is, can I use Gparted?
5.1. Can I not use an Arch Live CD and use Ubuntu for example? It's much easier to do it.
6. How do I know if I have a separate boot partition? I have all /dev/sda's, and one of them is boot I think. Don't we all have?
Sorry and thank you!
Also, and I want to make this clear, I did *not* use force on pacman, I never do.
So, what caused?
I just updated it normally, like I always do, was it some arch error everybody else experienced?
1) The time to boot the live cd, type the commands and like 30 seconds for mkinitcpio.
2) lol, not dangerous
3) Since it's in the Q&A: most probably.
4) You can always lose files. Just boot a live cd, mount the partitions you want to save and the partition you want to save it to and copy (or rsync).
5) I don't think so, unless you gave your partitions a descriptive label. Just mount partitions until you find the root.
5.1) I don't think so.
6) If you find your root partition: if /boot is empty, you have a separate boot partition. You can check your fstab to see which one.
What caused? dunno
Was it something everybody experienced: no
Good luck! Just follow the instructions, it's not that hard.
Last edited by Terminator (2012-05-29 21:47:43)

Boot de vice not found

I turned on my computer and it says "boot device not found". "Please install an operating system on tour hard disk"
Please give me a direct awnser or sendo me a expessific link because im on mt phone and its linda hard

Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partitionis in a working condition or not, If yes you can easily recover/restore your Notebook If Recovery Partition is corrupted You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliestORYou need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

[Solvd]hd0,gpt1error: file /EFI/Microsoft/Boot/bootmgfw.efi' not found

Similar Messages

Maybe you are looking for