Mounting NTFS on Solaris 10

How can i munt the NTFS partition of my Windows XP on Solaris 10?
Can somebody help me????
It can be possible?

Package FSWmisc now mounts NTFS partitions directly. No special mount_ntfs program required. It is based on Martin Rosenau's mount_ntfs. Package FSWpart comes with prtpart, which displays all the partitions, including extended partitions, and partition types.
See http://www.genunix.org/distributions/belenix_site/binfiles/README.FSWfsmisc.txt
Download from http://www.belenix.org/binfiles/FSWpart.tar.gz and http://www.belenix.org/binfiles/FSWfsmisc.tar.gz
Install with pkgadd -d . (in the directory you unpacked the above two tarballs).
Here's a sample /etc/vfstab line:
/dev/dsk/c0d0p1     -     /c     ntfs     -     no     roAnd sample output from mount and xlsmounts:
# mount
/c on 127.0.0.1:/ remote/read only/setuid/devices/port=33249/public/vers=2/proto=udp/xattr/dev=4700004 on Sun Nov 26 19:42:29 2006
# xlsmounts
PHYSICAL DEVICE                 LOGICAL DEVICE      FS    PID         ADDR Mounted on
/dev/dsk/c0d0p1                /dev/dsk/c0d0p1    ntfs   3354 127.0.0.1:/ /cAlso both mount_ntfs and FSWfsmisc work with Solaris 10 and OpenSolaris ("Nevada").

Similar Messages

Ask about mounting NTFS in Solaris 10

hello ev body
I got a 80Go hard drive
in which installed win XP .. linux mandrake9.2 and reecently the Solaris10
the partition of my disk are
[b]principal -1-
Fat32 partition [32 Mo] principal (is the booting )
Fat32 parttition [6.6 Go] for data storing purpse
[b]principal -2-
Solaris Partition [15 Go] where Solaris is installed
also mounted / ; /export/home ;/... all typical unix mounted
[b]principal -3 -
NTFS partition [10 Go] for data purpse
NTFS partition [10 Go] for data purpse
NTFS partition [15 Go] for data purpse
NTFS partition [14 Go] where installed win Xp
linux swap partion [512 Mo]
ext2 partition [3 Go] where installed linux
free space [<500M]
I wish this is detailled enough to give me the right solution to see all partions when running Solaris
I don't care about writing access in NTFS ..
Personally I successfully mounted The 2 Fat32 partions in solaris with
#mount -F pcfs -o rw /dev/dsk/c0d0p0:c /mnt/C
#mount -F pcfs -o rw /dev/dsk/c0d0p0:c /mnt/C
and I failed to see the NTFS Partions
So please if there is a way to do tell me how to do
or if you need more details I will do better expl..

Still Have no Answer !!
but when

Mount NTFS under Solaris 10

Hi can anybody tell me if i can mount a NTFS partition under Solaris 10??
Thanks for ur help.

<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>korsabad wrote on Wed, 11 January 2006 06:23</b></td></tr><tr><td class="quote">
if you use solaris x86 and the ntfs-partition
Not possible. NTFS has those windows-security-id's (you know, those about-40-character-long-id's) for each object which cannot be read from solaris.
</td></tr></table>
I think writing to NTFS is nearly impossible (due to changes of the NTFS version, security stuff, and so on).
However reading from an <u>unencrypted</u> NTFS partition seems to be a possible thing. I do not know if a tool or a driver <u>already</u> exists but I think it is a possible task to write a tool that reads from NTFS partitions.
I think writing a tool that reads from UFS partitions under Windows is an easy task, too. I wrote such a tool for reading the EXT2 file system under Windows long time ago.
Martin

Mounting zfs in Solaris 10

Currently I have three hard drives with:
Disk1: Solaris 10
Disk2: SXDE
Disk3: OpenSolaris (ZFS)
What is the proper way to mount Disk3 from Solaris 10 or SXDE

Hi
I think that the command that you need is 'zpool import' (on its own it will list pools that are available to import).
You may have problems if the version of ZFS on disk 3 is higher than the drivers on either Solaris 10 or SXDE (I recently tried importing an SXCE created ZFS partition into FreeBSD 7, but it failed for this reason).
Paul

Can not able to mount ntfs external hard disk

Hi
Getting the below error when try to mount NTFS external harddisk
Disk /dev/sdb: 1000.2 GB, 1000204885504 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 121602 976761558 7 HPFS/NTFS
sudo mount -t ntfs /dev/sdb1 /media
[root@devtest ~]# sudo mkdir /media/Skliros_Diskos
[root@devtest ~]# sudo mount -t ntfs-3g /dev/sdb1 /media/Skliros_Diskos
mount: unknown filesystem type 'ntfs-3g'
Rgrds,

Oracle Linux NTFS how-to:
Oracle Linux NTFS how-to

[Solved] Non-root user cannot access mounted ntfs filesystem

Hi -,
i have a dualboot system (arch/xfce + win7) and i use a ntfs partition /dev/sda2 to store files i use with both operating systems. I added the partition to fstab and it gets mounted, but i cannot access it with my non-root user. With root it works fine...
My fstab:
# cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
LABEL=home /home ext4 defaults 0 1
LABEL=root / ext4 defaults 0 1
LABEL=swap swap swap defaults 0 0
/dev/sda2 /media/sda2 ntfs defaults 0 2
Is there any option that allows all users to use the mounted device? Or how is this usually done ...
Last edited by muzzel (2012-05-30 20:39:58)

See: NTFS-3G for important setup information.
My fstab line looks like:
/dev/sdb1 /media/Win_USB ntfs-3g uid=1000,gid=users,fmask=113,dmask=0022 0 0
This sets up some important parameters which the NTFS-3G Wiki Page covers. Basically, "ntfs" is only a basic driver and is built into the kernel. "ntfs-3g" is a much better, and less disk-eating, driver that you should install and use if you need the drive in Linux any more than occasionally. My fstab line makes my user (1000) the owner and the masks lets me write and etc to it. When you install NTFS-3G it is automatically used when you use the mount command to mount NTFS drives. In fstab, as above, you would specify it explicitly.
You can find your own user number by entering "id" at a terminal.

Mount NTFS...

How can i mount ntfs partitions in arch like i had in ubuntu?
Automatic mount only for usb and cd...
And list all ntfs on places without mount... and when i click on one, it automount...

mrunion wrote:
Here:
http://wiki.archlinux.org/index.php/NTFS_Write_Support
Remeber, SEARCH before asking.
I search but didn't find nothing...
And your link doesn't help much...
I know how to manualy mount a ntfs... but i wanted to have all listed on "places" in gnome like i had on ubuntu.

Mounting ntfs on linux

How to mount NTFS partition on linux?
thanks in advance

I assume you mean redhat, oracle enterprise linux or Centos.
(it's a good practice to include as much information in a question as possible, the quality of the answer is strongly depended on the quality of the question)
http://www.google.nl/url?sa=t&source=web&ct=res&cd=10&url=http%3A%2F%2Fmicro.stanford.edu%2Fmediawiki-1.11.0%2Fimages%2FHowto_access_NTFS_v2.pdf&ei=nPhESbGKA8aC-gb5qLS7Aw&usg=AFQjCNGz2lxYoNW7rfDdZFaJ19wr5A3DYQ&sig2=IUYyYeCMnGz4MNGDee_yKQ

KDE's Dolphin can't mount NTFS partitions after upgrade to systemd

Hi, I just finished to migrate my system to a pure systemd setup. Everithing seems to work fine, except that Dolphin can't mount NTFS partitions anymore, as it was able to do before. I'm not 100% sure that systemd is the culprit, but nevertheless it is a big change in my system so I assume that it may be the problem.
Trying to mount with Dolphin I get this error message:
An error occurred while accessing 'sATA-a', the system responded: The requested operation has failed.: Error mounting: mount exited with exit code 1: helper failed with:
Error opening '/dev/sdb1': Permesso negato
Failed to mount '/dev/sdb1': Permesso negato
Please check '/dev/sdb1' and the ntfs-3g binary permissions,
and the mounting user ID. More explanation is provided at
http://tuxera.com/community/ntfs-3g-faq/#unprivileged
I used to get this kind of error aeons ago when trying to mount from CL; puzzling enough, mounting from CL now works:
$ mount /media/disks/sATA-a
$ ls /media/disks/sATA-a
Documenti Download $RECYCLE.BIN RECYCLER sATA-b System Volume Information Temp Video
This is the relevant entry in my fstab (I don't know if Dolphin cares about it...):
#sATA-a
UUID=D6789B21789B0003 /media/disks/sATA-a ntfs-3g noauto,users 0 0
And finally:
$ ll `which ntfs-3g`
-rwsr-xr-x 1 root root 125K 21 apr 12.13 /bin/ntfs-3g
Can anybody give me a hint? Thanks.

OK, the mess is growing up. Today I switched my laptop to systemd, and the mount problem has appeared on this system as well. So I am confident that this is a systemd-related issue, and maybe some stock Arch config file is broken. I have this entry on my /etc/fstab for the ntfs-3g drive:
UUID=88705BA9705B9D2E /media/vista ntfs-3g noauto,users,exec 0 0
I compiled ntfs-3g with internal fuse support and did the setuid trick:
$ ls -l `which ntfs-3g`
-rwsr-xr-x 1 root root 125K 16 apr 2012 /bin/ntfs-3g
I can mount the disk using the command:
$ mount /media/vista/
$
It works flawlessly, so ntfs-3g works. If I try to mount it with udisks I get:
$ /usr/bin/udisks --mount /dev/sda2 --mount-options users,exec
Mount failed: Error mounting: mount exited with exit code 1: helper failed with:
Error opening '/dev/sda2': Permesso negato
Failed to mount '/dev/sda2': Permesso negato
Please check '/dev/sda2' and the ntfs-3g binary permissions,
and the mounting user ID. More explanation is provided at
http://tuxera.com/community/ntfs-3g-faq/#unprivileged
It sounds to me that udisks is trying to mount the disk as a different user, but I'm not an expert so I might be wrong. If I remove the entry in /etc/fstab then udisks will ask for the password. Repeating the same steps but for an ext3 partition, I am able to mount with udisks when there is a proper fstab entry, and I'm asked for a password when that entry is commented out.
Based on these findings, I strongly suspect that there is some problem with logind configuration in my system. I have been going round and round for hours, serching the web and the wiki (which BTW is in a very bad shape, containing outdated or no informations about mount policies in the polkit and udev sections), and now I feel I need some help to go through it... thanks.

"mount: only root can mount" or "Unprivileged user can not mount NTFS"

I'm trying to set up an NTFS partition to use as a common data partition between Arch and Windows. I have it added to fstab so that any user in the ntfsuser group can have access to it, but if it gets unmounted accidentally from the "eject" symbol in the nautilus gui, you have to sudo to mount it back up. Is there a way for it to be remounted automatically when you click on the partition again in Nautilus? I've searched all through the forums and looked through several articles on the wiki but haven't been able to come up with anything. The error I get says
mount: only root can mount /dev/sda4 on /home/adam/UserData
I've tried adding the users option to fstab, but that only manages to change the error to
Unprivileged user can not mount NTFS block devices using the external FUSE
library. Either mount the volume as root, or rebuild NTFS-3G with integrated
FUSE support and make it setuid root. Please see more information at
http://ntfs-3g.org/support.html#unprivileged
I've tried the suggestions at the link in the error, as well as tried the solutions given in [solved] Gnome : mounting NTFS partition as user and a few other posts, but still nothing. If possible, I'd prefer to stay away from the users option in fstab, since it adds a redundant link to the sidebar in nautilus with a different name.

@Mr.Elendig: It is mounted through fstab normally, but in nautilus there's an eject icon on the sidebar next to the name of the drive which I've accidentally clicked on a couple times if I'm just trying to open the drive real quick. Once its been unmounted like that it won't let me remount unless I use sudo. I'm just looking for something to make it a little more convenient than having to pop open a cli and type in a password.
I'll try the suid root when I get home tonight, otherwise I'll look into autofs.

Can't mount ntfs from linux

Dear Sirs,
I have install linux Redhat5.3 release 2.6.18-128.el5PAE.i am trying to mount some of the drive of windows 7 on my linux system.
Someone can help me with the rpm for the same.

[linux.softpedia.com/get/System/.../ntfs-3g-15028.shtml] linux.softpedia.com/get/System/.../ntfs-3g-15028.shtml
or
[www.tuxera.com/community/ntfs-3g-download|www.tuxera.com/community/ntfs-3g-download] www.tuxera.com/community/ntfs-3g-download|www.tuxera.com/community/ntfs-3g-download
Use ntfs-3g package to mount ntfs drives into linux.
use following command at shell prompt
$ mount -t /dev/sda1 /mnt/drive_win7
Please find your drive such as sda1 or sda2 or anything from fdisk command and press p to print and press q to quit.
Also, if you want to mount every time you login into linux system.
Then you have to change /etc/inittab file.
Google it out. Easy commands out there for newbies like me and you there.
Regards,
Dave.
Edited by: 897450 on Dec 19, 2011 3:15 AM

Mount NTFS volumes in Solaris 10 update 8

Hi All,
I have a requirement to mount a windows share to two different Solaris 10 update 8 hosts . The below are the steps that i have done for the same but it got failed .
Please suggest a procedure and solution .
1 . Created the network share named " csv_source " on windows 2008 server . The share is given permission to everyone full access
2 . I have enabled the samba service on solaris server
3 . Created a directory on solaris server using mkdir /data
4 . Used the " mount " command to mount the volume but its failed .

Can you boot from DVD and do an "upgrade?"

Mount partition in solaris 11

hi ,
I have an unallocated space 11 gb in solaris 11. Using GParted i have created an extended partition then make an logical partition of it. It make an ntfs file system by default. Now my question is where i see this partition i have use the mount command but it does not work showing the below message.
mount: /dev/dsk/c3d0p5 is not this fstype
Kindly guide me how i can make this partition in my use.
Thanks
Zeeshan

I'm going to presume your disk is physically inside the computer.
(You didn't describe the system, nor where that drive was. In fact, you gave no usable hardware information.)
If you have ANYTHING in the computer that you would find painful to lose, such as another OS ...
If you have never installed Solaris before ...
... get a new disk drive and have that be the only disk in the computer.
Yes, that means actually spending money, but you will be happier with the results.
The Solaris installation process wil see your disk (or disks if you have more than one) and it will ask you where you want to install the OS. You will be presented with a number of opportunities to customize your choices. Solaris does not need third party utilities to prepare the hardware. So long as your components are known to be compatible, it wil "just work".
---> Just leave the space unconfigured. Let the installation process take care of it.
Learn by installing the OS.
Then re-install it immediately again with different defaults.
Then re-install it again, with yet a different set of settings.
Don't try to get fancy with multi-boot or alternate-boot lash-ups.
Keep everything simple and you will become competent at this.

Error in mount FAT in Solaris 10 x86.

Hi all,
I did try mount an FAT partition in Solaris, but I receive an error, see:
# /usr/bin/prtpart /dev/rdsk/c1d0p0 -ldevs
Fdisk information for device /dev/rdsk/c1d0p0
** NOTE **
/dev/dsk/c1d0p0 - Physical device referring to entire physical disk
/dev/dsk/c1d0p1 - p4 - Physical devices referring to the 4 primary partitions
/dev/dsk/c1d0p5 ... - Virtual devices referring to logical partitions
Virtual device names can be used to access EXT2 and NTFS on logical partitions
/dev/dsk/c1d0p1 IFS: NTFS
/dev/dsk/c1d0p2 WIN95 Extended(LBA)
/dev/dsk/c1d0p5 IFS: NTFS
/dev/dsk/c1d0p6 IFS: NTFS
*/dev/dsk/c1d0p7 WIN95 FAT32(Upto 2047GB)*
in bold is the partition that I want mount.
dir that I want mount in:
# pwd
/mnt/windows
# mount -F pcfs /dev/dsk/c1d0p7 /mnt/windows
mount: /dev/dsk/c1d0p7 is already mounted or /mnt/windows is busy
/dev/dsk/c1d0p7 is not mounted, when I navigate to mnt/windows it is void..
what is wrong?
thanks to all...

Well, you can't stand in the directory you are trying to mount, if you stand in '/mnt/windows' you will not be able to mount anything over it. (thats what 'busy' means in this context).
Basically your pwd can be anything except the mountpoint.
Hence, try a 'cd /' first, then try again.
.7/M.

Cannot mount USB on Solaris 10 10/08

I inserted the USB drive, I have tried the following, however it didnt work.
devfsadm -Cv
Format>
In format, Im seeing only 1 disk. (that is my harddisk)
0 -> c1todo
I did few more things,
Mount -F pcfs /dev/dsk/c2t0d0p0:c /mnt
How I found out its c2, iostat -En output.
Please someone assist.
Thanks,
Sylvester, Prasanth

& I tried making ZFS file system on pendrive,
zpool create myusb c2t0d0p0
zpool list myusb
Now I can see the file system, however windows doesnt recosgnise it now :( screwd again !!!Right, Windows has no idea what ZFS is so there is no way that it can mount the drive.
In order for it to work on both Windows and Solaris then you need to format the device with a filesystem in common.
The most common way to do this is to format it with a FAT32 filesystem or you could use NTFS if you load up the drivers for it on the Solaris side.
After you format it FAT32 then Windows should have no problems with it since it's a native format and Solaris vold mounts my FAT32 USB devices automatically.
alan

Mounting NTFS on Solaris 10

Similar Messages

Maybe you are looking for