Mounting Oracle DVD's

Hello Everyone,
Just thought I would share an experience here, with the hope it helps someone.
This note is about mounting Oracle DVD's on HPUX 11.11, on a RP5470 Unix Server. In the past, we have used the pfs_mount command. pfs_mount has caused nothing but lots of trouble. As ridiculous as this sounds, reboots were sometimes required to get the DVD or CD to eject.
After some digging around, we have found that using the following command solved all our issues.
mount -F cdfs -e -o ro,rr /dev/rmt/<device_file> <mount_directory>
Hope this helps...Colin

Colin,
Thanks for sharing this with us.
Regards,
Hussein

Similar Messages

Unable to mount the DVD on Oracle VM Server 2.2.1

Hi All,
Good day, We are unable to mount the DVD on Oracle VM Server 2.2.1. System is throwing the following info in messages file.
Server X4170 M2
OS: Oracle VM Server 2.2.1
usb 2-3.1: reset low speed USB device using ehci_hcd and address 8
usb 2-3.2: reset low speed USB device using ehci_hcd and address 9
USB disconnect, address 8
Regards
Gurudatta N.R

and i go to the temp mountpoint that the script will mount on
Starting install...
ERROR: Invalid NFS location given: [Errno 2] No such file or directory: '/var/lib/xen/xennfs.7x4Rf4/boot/x86_64/vmlinuz-xen'
[root@ovs2 opt1]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/cciss/c0d0p2 3050092 3033308 0 100% /
/dev/cciss/c0d0p1 101086 47114 48753 50% /boot
tmpfs 288856 0 288856 0% /dev/shm
none 288768 40 288728 1% /var/lib/xenstored
/dev/cciss/c0d0p3 288623616 301056 288322560 1% /var/ovs/mount/A52CB661C1CF41D198D50F6379822694
/var/isos/OracleLinux-R5-U7-Server-x86_64-dvd.iso
3755446 3755446 0 100% /el/EL5-x86
192.168.229.110:/el/EL5-x86
3755456 3755456 0 100% /opt1
192.168.229.110:/el/EL5-x86/
3755456 3755456 0 100% /var/lib/xen/xennfs.NnE54I
[root@ovs2 opt1]# cd /var/lib/xen/xen
xend-db/ xennfs.7jHT0q/ xennfs.fQNnQD/ xennfs.LR6hDx/ xennfs.QnxyeH/
xennfs.5Pr0vm/ xennfs.8aMSAA/ xennfs.fRhXiN/ xennfs.NnE54I/ xennfs.yEw4KL/
[root@ovs2 opt1]# cd /var/lib/xen/xen
xend-db/ xennfs.7jHT0q/ xennfs.fQNnQD/ xennfs.LR6hDx/ xennfs.QnxyeH/
xennfs.5Pr0vm/ xennfs.8aMSAA/ xennfs.fRhXiN/ xennfs.NnE54I/ xennfs.yEw4KL/
[root@ovs2 opt1]# cd /var/lib/xen/xennfs.NnE54I/
[root@ovs2 xennfs.NnE54I]# ls
blafdoc.css EULA GPL README-en RELEASE-NOTES-en.html Server VT
Cluster eula.en_US images README-en.html RPM-GPG-KEY supportinfo
ClusterStorage eula.py isolinux RELEASE-NOTES-en RPM-GPG-KEY-oracle TRANS.TBL
[root@ovs2 xennfs.NnE54I]# find . -name vmlinuz\*
./images/pxeboot/vmlinuz
./images/xen/vmlinuz
./isolinux/vmlinuz
[root@ovs2 xennfs.NnE54I]#

Can't mount oracle database on linux system

This is same as previous posting just added
e-mail and username info fo forum posting.
I am not able to mount an Oracle database.
I am new to Oracle and am working on an Oracle8i installation on an
Intel Linux Suse 6.3 platform. I am using only one harddrive and am
not using the 4 mount points as mentioned for efficiecy purposes in
the Oracle documentation..I am using the installation cd from Oracle8i
for Linux Starter Kit by Oracle Press. If anyone has this book they
can refer to pages 41-44 for the examples I followed.
As sysdba in sqplplus using the STARTUP command I can not Mount the
database -step 2 of the 3 stage process (Start, Mount and Open the
database) of opening an Oracle database.
I show the errors I encountered when I did the first 2 of the 3 steps
in the step-by-step mode (STARTUP NOMOUNT pfile=, ALTER DATABASE
MOUNT) in the sqlplus session and alert log respectively with startup
nomount and alter database mount for this sqlplus session.
Additionally I show the init.ora file lines referring to control file
which seem to be referred to by the sqlplus error messages and the
alert.log file. Perhaps some can give me some advice as what I can try
to fix this problem.
At the end of this e-mail I added several questions I had in regard to the control
files. Any help is appreciated.
Well, here are the sqlplus session results and its alert.log file:
Oracle sqlplus session usr/oracle as sysdba
oracle@CHESTNUT:~ > sqlplus
SQL*Plus: Release 8.1.6.0.0 - Production on Mon Mar 19 20:47:49 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: usr/oracle as sysdba
Connected to an idle instance.
SQL> startup nomount pfile=/usr/oracle/dbs/init.ora ;
ORACLE instance started.
Total System Global Area 24989680 bytes
Fixed Size 69616 bytes
Variable Size 24637440 bytes
Database Buffers 204800 bytes
Redo Buffers 77824 bytes
SQL> alter database mount ;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying controlfile, check alert log for more
info
SQL> shutdown immediate ;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected
oracle@CHESTNUT:~ >
alert.log file for above session
Mon Mar 19 20:48:38 2001
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.6.1.0.
System parameters with non-default values:
processes = 50
shared_pool_size = 3500000
control_files = ora_control1, ora_control2
db_block_buffers = 100
log_buffer = 32768
log_checkpoint_interval = 10000
db_files = 80
db_file_multiblock_read_count= 8
global_names = TRUE
db_name = DEFAULT
parallel_max_servers = 5
max_dump_file_size = 10240
PMON started with pid=2
Load Indicator not supported by OS !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon Mar 19 20:48:58 2001
alter database mount
Mon Mar 19 20:48:58 2001
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Mar 19 20:49:01 2001
ORA-205 signalled during: alter database mount
Mon Mar 19 20:49:12 2001
Shutting down instance (immediate)
License high water mark = 1
Mon Mar 19 20:49:12 2001
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
archiving is disabled
init.ora control files
# define two control files by default
control_files = (ora_control1, ora_control2)
Here are my control file questions:
I need to know several points:
1) What are control files susposed to
contain and how would I recognize them?
I used the
unix find /usr/oracle \*ctl* -print
command to locate files with a ctl extension.
This resulted in about a dozen such files in
different directories as shown below:
./bin/lsnrctl
./bin/extractlib
./bin/agtctl
./bin/oidctl
./bin/lsnrctl0
./bin/agtctlO
./rdbms/demo/ulcase1.ctl
./rdbms/demo/ulcase10.ctl
./rdbms/demo/ulcase2.ctl
./rdbms/demo/ulcase3.ctl
./rdbms/demo/ulcase4.ctl
./rdbms/demo/ulcase5.ctl
./rdbms/demo/ulcase6.ctl
./rdbms/demo/ulcase7.ctl
./rdbms/demo/ulcase8.ctl
./rdbms/demo/ulcase9.ctl
./ldap/load/dn.ctl
./ldap/load/attr_store.ctl
./ord/ts/demo/tsquick/tsquick.ctl
./ord/ts/demo/usageutl/utildat.ctl
./ord/ts/demo/usage/stockdat.ctl
./ord/ts/demo/usage/stockinc.ctl
./ord/ts/demo/retrofit/sales.ctl
./ord/ts/demo/retrofit/sales2.ctl
./ord/ts/demo/applet/indexdemo.ctl
./javavm/admin/libjox8com_sun_jndi_ldap_ctl.so
./md/demo/examples/migctl.h
./md/demo/examples/migctl.c
2) On page 100 in the book Oracle 8i A Beginners's
by Oracle Press mention is made of a
CREATE CONTROLFILE command that can under
circumstances be used to re-create a control-file.
but that is all that is said about it. Perhaps
you might know something more about it.
3) Would you recommend any good text for
Oracle DBA's, especially for the problem of the sort
that I am encountering?
[email protected]
null

It's probably not supported on RHEL5/Centos5/etc., but...
You can get the installer to function using the following steps:
- extract the cal_linux_*.tar.gz, and cd into the OracleCalendar_inst directory
In there is the actual installer, cal_linux.
- the cal_linux is shell script wrapped around some binary blobs. The installer's
problem is that Oracle is setting the LD_ASSUME_KERNEL=2.2.5 environment
variable, which is a mistake on RHEL5. You need to make it not set that variable,
but you need to do so in a way that the size of the shell script does not change at all,
and none of the binary blobs are impacted.
- the approach I took was
mv cal_linux cal_linux.BAK
sed -e 's/LD_ASSUME_KERNEL=2.2.5/LD_ASSUME_KERNEL= /g' < cal_linux.BAK > cal_linux
chmod a+rx cal_linux
cal_linux -i gui
Note: you must have exactly 5 spaces in the substitution part of the sed command, because you're replacing 5 characters (2.2.5), and the size of the shell script must not change.
If you do that, the installer should run (one warning from awk still) and you should be able to install the product.
Tim

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

Mounting a dvd on Solaris 10

I am a linux user, not a Solaris user and I am running solaris 10 on a Blade 100. I want to mount a dvd but am unsure of how to mount it because of the difference between Solaris and Linux command lines. "mount cdrom" does not work. I am sure this is an easy answer to this question but I can't seem to get this DVD mounted.
Thanks,
Michael

Unless you've changed the system's configuration, mounting
CD/DVD media is supposed to happen automatically, with the
help of the "vold" daemon.
The CD/DVD will be mounted somewhere in /cdrom/xxxx with a
symbolic link /cdrom/cdrom0 pointing to the root directory of the
media.
If you've disabled "vold", of if you didn't install it, manual mounting
works like this:
1. iostat -En
This command can be used to print a list of SCSI/ATAPI/USB/
Firewire disk/cdrom/dvdrom devices. Note the disk id in front
of the entry, for example "c1t1d0":
% iostat -En
c1t1d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: HL-DT-ST Product: DVDRAM GMA-4020B Revision: A105 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 02. Manually mount the device, using the device id from the above
iostat command, with slice "s2" appended (on Solaris x86:
append "p0").
# mount -F hsfs /dev/dsk/c1t1d0s2 /mnt

How to mounted oracle database automatically in oracle version 8.1.7?

i want to know,how to mounted oracle database automatically in oracle version 8.1.7?

Does this mean you are not using the WIndows operating system, or you doi not want to do this 'manually' using some point and click method?
If this means, "do it automatically for reboots" and you are using the Windows OS, you need to set up a service and set it to automatic at reboot. Or, again in a Windows environment but at commnand line, use "net start {service name}" - as described in the manual.

Roof Mount TV/DVD Issues

Guys,
We recently had two roof mount TV/DVD systems installed in our pediatric ambulances. The problem that we're having is that because it is so bumpy in the back of the amblance, that the screens are dropping down when not in use, and the tabs that are supposed to hold the screens up are snapping off. Any suggestions on how to secure them without making it look totally ghetto? We have explored the use of velcro, but are afraid that after much use, they will just start tearing the frames off of the TV. (IE: The velcro is stronger than the plastic).
The units are Pyle Audio PLRD175IF, 17" TV/DVD player
Thanks for any suggestions.

the screens should have come with a metal brackett for support. these bracketts are the backbone of the screen staying in place. looks like you need to have them secured properly to the top of the vehicle useing some type of speed clips or short bolts with lock washers. i'm not sure what type of screens you have but you should use universal top mount screens.

IMac G5 won't mount commercial DVDs

I have a 1-year old iMac G5 that suddenly stopped mounting commercial DVDs (e.g., movies). DVDs and CDs containing software programs mount fine, as do unformatted DVDs for burning. But not movie DVDs. My software is up to date, including latest security upgrades (so I'm kind of suspecting the latter as a possible cause for the problem). But have others seen this or worked out solutions?

Mine has done this on occasion.
After ejecting a few times/restarting, it works.
I can't get it to do it consistently though so I can't troubleshoot it.

MacBook will not mount CDs but will mount & read DVDs

This MacBook is used mainly for surfing, email and word processing. Very few other programs are installed and/or used. Recently it stopped mounting and reading CD's. It continues to mount & read DVD's. When I insert a CD (commercial or home burned) the drives sounds like it is trying to read it and then after awhile it ejects the CD. I have other Macs & PC's which can read the rejected CDs.
All software is up-to-date and disk permissions are in good shape. AppleCare had me reset the PRAM. Would appreciate any other steps I can try to fix the situation. In several weeks, I will be traveling to a city with an authorized Apple repair unit where I can have the computer looked at. I'd rather fix it myself if possible

If your computer is covered by warranty or extended Applecare they will probably replace the drive.
In many cases, though, these sorts of problems can be simply overcome using a drive cleaning disc.
Certainly worth a try if you are out of warranty (Apple have said that they don't like cleaning discs in the past so you may not want to use one if you are still under warranty etc. I have personally used cleaning discs for many years in Apple slot load drives without the slightest problem however, and they have instantly "fixed" drives that would otherwise seem to be beyond redemption!).
Cheers
Rod

SAP NW Installation on Oracle with original Oracle DVDs

Hi all,
I heard that it should be possible to instal SAP NW 7.0 with Oracle DVDs which are not packaged by SAP.
If this would be the case I have 2 questions:
- is this procedure documented (and where)
- would the resulting SAP system supported by SAP
Thanks in advance Gerold

Hello Gerald,
Just be careful, because if you face any issue during the installation no using the SAP DVDs the support may no be able to help you.
Also, one of the most important thing, follow the guide:
http://service.sap.com/instguides
> Database Upgrades
> Oracle
> Choose the Oracle version and Platform
Regards,
Eduardo Rezende

Force mount nonexistent dvd drive

Hello all, So intro: The other day I pop in a dvd backup that has some files I need, now the dvd is not readable, no scratches or anything to the disk read surface. The dvd is just dead. So what I want to do is to force mount the dvd and make an image and then try and sort through the files if at all possible. What I would like to do is:
sudo mount -t iso9660 /dev/sr0 /mnt/dvd -o force,ro
and possibly create an image or what I am most leaning towards is dumping the image to a file and then analyising it later:
dd if=/dev/sr0 of=/home/x/dvdrec.iso conv=noerror
but doing so gives me an error
dd: opening '/dev/sr0': No medium found
and of course the force mounting results in an error saying no media was detected...
Is there anyway to trick fstab into thinking there is a medium mounted there (like there is)
I have searched around the net trying to find some way to recover the files but have had no success. So I was wondering if what I said above would be possible and would work at recovering my files. Any other suggestions on recovering my data? Any feedback is greatly appreciated.

Nope no error with the drive (at least I dont think so), it reads other dvds perfectly fine, and before it read the dvds that I am trying to get it to read, I always run a data verification check after burning a disk and they always pass, then I try them just to double check.... I havent had a chance to try it on another dvd drive but I have arranged to use my friends computer to see if it works with his computer, if it does then the my drive is gone.... on the other hand if it doesnt work who knows. Another thing is that I have some other dvds from the same set that are perfectly fine, partly corrupt, and fully unreadable. I dont mistreat my dvds and I can see the burnt in data in the disk, but my comp just cant read it. Im at a loss. Possibly defective media? but that wouldnt explain why it worked before....

Need drivers, Vista won't mount Leopard DVD

Somehow Parallels Desktop (or something) hosed the drivers on my BootCamp partition. Result: can't mount DVDs. Since the only solution for restoring the drivers is to insert the Leopard DVD, you can see my problem. I need drivers to mount the DVD and I need to mount the DVD to get the drivers!
Is there any way out of this vicious circle?

Use another Windows system to put the Drivers folder from the Leopard CD on a USB or FW storage device and then apply the drivers individually on your BootCamp Vista from the storage device. There is some information about this on page 24 of the BootCamp installation instructions.
Message was edited by: xnav

Error trying to mount the DVD to a network based ISO image in Windows 2008 Hyper-V RC0

Greetings,
When I try to configre the guest OS settings to mount the CD/DVD drive to an ISO image I have setting on a file share, I consistently get an error. The only time I have been able to mount an ISO since upgrading to RC0 (I don't remember if I tested this in the BETA) is when the ISO is locally on the Windows 2008 Hyper-V server.
To be specific, I get the following error:
Virtual Machine Connection (title of the window)
Inserting the disk failed.
Failed to add device 'Microsoft Virtual CD/DVD disk'.
User account does not have sufficient privelage to open attachment '\\remoteserver\share\ISONAME.ISO'.
Error: 'General access denied error'
'NEWGUESTOSNAME' failed to add device 'Microsoft Virtual CD/DVD Disk'. (VMID 26C8B66F-5D3F-47F9-9D80-474D0F778522)
'NEWGUESTOSNAME': User Account does not have sufficient privelage to open attachement '\\remoteserver\share\ISONAME.ISO'.
Error: 'General access denied error' (0x80070005). (VMID 26C8B66F-5D3F-47F9-9D80-474D0F778522)
I am not sure what credentials it is using. It looks almost like it is using the new computer name as credentials or something like that. The account I am logged in as at the time is a Domain Admin and has access to every server and every share. I can browse to the ISO just fine through the Hyper-V Insert Disk function, it just won't take.
I have checked the Hyper-V server settings and the Guest OS settings and can't find where to specifcy what account to use to connect to remote ISOs. Anyone have any clue on what I am doing wrong?

Thanks for the various replies.
Understood it is an issue with the Hyper-V server computer account getting the files, and not the actual guest OS. At this point I think I will just copy some ISO's to the server. I did note the last time I used a "local" ISO that I had to manually type out the local path to the files on the server, as when I tried to browse to the local server drives through the console I got an error about connecting to the local server (which wasn't really local) through the network drives. I don't remember the exact error, but I know I couldn't get it to point to the ISO on the D:\ drive through the browse feature, but rather I just typed out the path and it was fine. That too seems like a bit of a buy/annoyance as I should be able to browse files local to the Hyper-V server, and not have to type out the path.
I guess I would ask MSFT to consider changing the behavior of the console just a little before RTM if it is being run remotely against the Hyper-V server, versus locally on it, if the permissions being used to get to the remote files are going to be different depending. I.E. It is not intuitive that the same exact action in the same exact console would behave any differently when the console is run on the Hyper-V server versus remotely against the Hyper-V server. I.E. Add in a pop-up when remotely connected to the Hyper-V server to let the user know that some permissions may not proxy through (or whatever verbiage you want to use).
This will pop-up more and more as people like me try to deploy Hyper-V on Core servers, and they used Hyper-V on a normal Windows 2008 server previously.
Thanks!

PI 7.1 EHP1 - Installing SP03 - Can't mount Kernel DVD

Hi Experts,
I'm presently intalling the latest packs on a PI7.1 EHP1 box.
I've dowloaded all the files in a folder and started the upgrade with the Upgrade master.
Entered the the up keyword, download directory path, did the DDIC and OS password. It seems to be extracting the kernel etc.
Now I'm up to the point where there asking me to point to the where the Kernel DVD is mounted.
I'm at a lost here... I have a couple files identified has Kernel files which I extrated and there was no MID.XML fiel.
I've also tried to point to the Export Upgrade DVD with not luck.
What I'm I missing?
Thanks and regards.

Hi Experts,
I'm presently intalling the latest packs on a PI7.1 EHP1 box.
I've dowloaded all the files in a folder and started the upgrade with the Upgrade master.
Entered the the up keyword, download directory path, did the DDIC and OS password. It seems to be extracting the kernel etc.
Now I'm up to the point where there asking me to point to the where the Kernel DVD is mounted.
I'm at a lost here... I have a couple files identified has Kernel files which I extrated and there was no MID.XML fiel.
I've also tried to point to the Export Upgrade DVD with not luck.
What I'm I missing?
Thanks and regards.

Mount my dvd and Cd drives

I have both cd and dvd burning drives, and ever since I first installed arch they've been innaccesable, and their contenst invisible.
Two cd drives (one too many) and a dvd drive are listed in /media, but I can't see any of their contents.
Something I used to be able to do using nautilus (I'm using whatever xfce4 comes with now) in ubuntu.
I've tried
mount -t auto /dev/dvd /media/dvd
But I get told to specify the filesystem type. Which I don't know, and probably varies accross different types of cdrom and dvdrom.
I'd like to be able to see, and use, both my cd and dvd drives for movies, music, and burning. And I'd like to be able to see their contents easily in the termnal or the file broswer.
Any help would be appreciated, I don't want to use Ubuntu

Forgot to mention - I've been using root, which is in the optical group.
It didn't work, and just told me to specify the filesystem type again.
My fstab says:
/dev/cdrom /media/cdrom auto ro,user,noauto,unhide 0 0
/dev/cdrom1 /media/cdrom1 auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
Again, one to many cdrom entries, but I don't know which one is correct.
hal is currently added to the deamons to run at startup.
Last edited by desm (2009-03-01 16:22:54)

Mounting Oracle DVD's

Similar Messages

Maybe you are looking for