Mounting? suddenly didn't work

I have a problem mounting nowadays, not too sure what happened. It has been working for me all along. here's my entry within /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /proc proc defaults 0 0
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
#sysfs /sys sysfs defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
/dev/cdroms/cdrom0 /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/cdroms/cdrom1 /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/floppy/0 /mnt/fl vfat user,noauto,unhide 0 0
#/dev/sda1 /mnt/thumb vfat rw,user,umask=022 0 0
#/dev/sda1 /mnt/hd2 vfat rw,user,umask=022 0 0
/dev/discs/disc0/part1 /mnt/win_c ntfs ro,user,noauto 0 0
/dev/discs/disc0/part2 /mnt/win_d vfat rw,user,noauto,umask=022 0 0
/dev/discs/disc0/part3 swap swap defaults 0 0
/dev/discs/disc0/part6 / ext3 defaults 0 1
/dev/discs/disc0/part5 /boot ext3 defaults 0 1
/dev/discs/disc0/part7 /home ext3 defaults 0 1
If i put a CD in my CD and type 'mount /mnt/cd' it returns: no medium found.
If i put a CD in my DVD-ROM, and type 'mount /mnt/dvd', it returns:
mount: wrong fs type, bad option, bad superblock on /dev/cdroms/cdrom1,
       or too many mounted file systems
Anyone have an idea what's going on? I've managed to mount any CD all this time with similar entry, and now I'm stuck with no clue whatsoever. Please help[

I am going to start with one that seems highly suspect to me and that is your "No medium found" when you try to mount your /mnt/cdrom.  Assuming that the mount command is ok,  this indicates that it's searching the wrong drive to me (and I said as much when I posted the first time).  so if you have not already checked it could you check and make sure
ls -l /dev/cdroms/cdrom0 is pointing to the correct /dev/hdx (ie. you cdrom?) .  your DVD sounds like it's pointing correctly.  did you also try mounting it manually like so:
#mount -t  udf /dev/cdroms/cdrom1 /mnt/dvd
(This doesn't go through /etc/fstab BTW, so it's worth a try)
I don't know how the kernel is configured so I am going to guess: you did install the correct version of the kernel right? kernel26 instead of kernel26scsi?

Similar Messages

  • Toshiba LCD 46RV600T HDMI suddenly didn't work

    Hi all,I used to connect my laptop to Toshiba 46RV600T via HDMI for watching films and so on as the second screen.Yesterday, I had a new xbox 360 slim, then I tried to connect xbox via HDMI but it didn't work on Toshiba but for other Samsung worked fine via HDMI. On Toshiba, I only can connect my xbox via AV composite input.After several tries to unplug and connect my Xbox between my Toshiba LCD and Samsung LCD, now when I get back to connect to my laptop, the laptop didn't recognize Toshiba anymore, only VGA worked, HDMI totally didn't work now.I have many tries and methods but didn't solve the problem. Can anyone here give me an advice? Thanks!

    Nothing's working with that HDMI input on your Toshiba TV now at all?

  • Afp mount suddenly doesn't work

    Hi All
    I have a Lacie Ethernet disk mini with assigned IP address 169.254.1.4. Been able to connect fine using 'Connect to Server' in Finder and in fact set to mount automatically from login. Suddenly, today, been unable to connect using this method. I get to the "connect as.." dialogue box with username and password, put those entries in, and get to the "EDmini, select the volumes to mount" screen, Share is selected. I click OK, then nothing happens. Looking in activity monitor, AFP Client has hung.
    I've tried deleting the keychain entry, deleting the .Globalpreferences.plist file, re-entering my username and password.
    However, connecting using the IP address of the ethernet disk in the browser works OK, ie, http://169.254.1.4/. From there I can select to connect via http or ftp. Using ftp will mount the disk. Even so, I can't write to the disk. It says zero K available. I've tried logging on to the admin section using the browser, but all my username and password is not being accepted.
    What is going on here and what do I need to do to sort it out?
    Michael
    iMac 20" Intel Core Duo 2GHz running 10.4.6 fully updated except QT 7.1.1 and Sec Update 003

    Hi Jason
    SMB is working after a reset. AFP is still no go. I have yet to get back to Lacie since they sent me instructions on how to reset the EDmini.
    I've used EXT3 format on the drive, and to truly back up my home directory I need to use AFP. I am unable to get any files with disallowed characters copied over using SMB, eg those with *, ?, / etc. I can't manually change them all because some are part of the Tiger system, and others are things like emails within the Entourage database.
    I will contact Lacie again.
    BTW if you look in the system log of the EDmini (via the browser admin feature), you'll see the count for the number of AFP users go up each time you try to connect. I told Lacie this, but they didn't respond to this fact.

  • Brand new macbook air charger suddenly won't work

    I bought a new macbook about four weeks ago. Everything is in great shape, inlcuding the charger. It suddenly didn't work yesterday. I've tried some of the troubleshooting stuff, nothing is working. Any ideas?

    Failure to wake from sleep is not normal regardless of the Energy Saver settings.
    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Wireless suddenly doesn't work, both in OSX and windows 7

    I have got a new model of MacBook Pro 13-inch. Everything work fine until one day I found the wireless suddenly didn't work, both in OSX and windows 7(boot camp.)
    I tried my USB-wireless adapter on macbook, it works fine.
    In bootcamped windows 7, I have uninstalled and re-install the wireless adapter, still doesn't work.
    Actually it can find the wireless networks but cannot join them.
    I need to mention before then I kept play heavy games like starcraft2 frequently, and macbook got so hot during playing, so maybe the wireless module was damaged by heat somehow??
    Seeking for help ~~~
    Message was edited by: demax
    Message was edited by: demax

    Seems I'm pretty annoying but I need to post again because I found something interesting: once I plug my external monitor to the macbook, the wireless strikes, and once I plug out the monitor, wireless recovers... Anyone has any idea?
    Message was edited by: demax

  • I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

    I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

    If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    Or sent it to Apple

  • So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't

    So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't work. I don't know what to do!!

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • My iphone all a sudden it turn off then now i cant even turn it on and i tried to restore but it didn't work. please help

    while my iphone is charging at my laptop all the sudden my phone turn off and  tried to turn it on but it didn't work, i even tried to press the home botton and the lock button but still i cant turn it on. i also did plugging my iphone to itunes to restore but it didn't go through. i dont know what else to do. please help.

    That's the same problem I'm having.   No response or juice.

  • Hello, my backspace and enter keys suddenly stopped working. I have done a PRAM reset and used the keyboard viewer to see if the buttons work and they don't.  The PRAM reset didn't work  either

    Dear All,  the backspace and enter keys on my wireless keyboard suddenly stopped working.  Im using OS 10.7.5 and have tried a PRAM reset which didn't work.  I also used the keyboard viewer to see if the keys worked on that but they don't.  This is driving me mad, can anyone please tell me what to do?  It happened just after an update but this could be a coincidence.  Thank you for your time 

    For my computers, though some of them support BlueTooth devices and accessories,
    my preference and economy of standard, is to have wired USB and also use powered
    USB hubs for accessories.
    I've used USB wired keyboards and mouse products; and some I've bought from the
    original owners who had upgraded to BT, and never used the new Apple USB model;
    so I have spares of these on-hand since they seldom fail, but do work when BT won't.
    {A SMC reset should not cause a problem, or seldom has; but can solve some.}
    In my opinion, the wired USB keyboard is an essential accessory, if not a necessary
    primary means of user access on a continuous basis. At least until the wires fail...!

  • Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

    Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

    Have you tried re-booting your WiFi router ?  It may seem OK on your PC, but a re-boot may help.

  • If I try to send an email ,I got the message "the server doesn't accept this email address".It happened suddenly,before it worked correctly and I didn't change anything

    If I try to send an email ,I got the message "the server doesn't accept this email address".It happened suddenly,before it worked correctly and I didn't change anything

    Change the password on that e-mail account. It's possible that your account has been hacked/spoofed and spammers have used it to blast out junk, leaving you to 'pay the price'. If it's one where you can contact the company, contact them and ask them what's going on. (if this is g-mail, yahoo, hotmail, don't bother, there's no way to contact any sort of support)

  • My bluetooth suddenly stopped working soon after I upgraded to OS 10.9.4. I rebooted SMC, didn't work. Any other ideas?

    My bluetooth suddenly stopped working soon after I upgraded to OS 10.9.4. I rebooted SMC, didn't work. Any other ideas? Don't know if it's related to the upgrade. I see other complaints about bluetooth in the thread but none of the solutions offered there have worked for me.

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Was just scrolling through my apps when the screen suddenly froze. A force shutdown didn't work and when I pressed the silent on/off button, there was no vibration either. The frozen screen faded to white with a few lines and about 10 minutes later, the

    I was just scrolling through my apps when the screen suddenly froze. A force shutdown didn't work and when I pressed the silent on/off button, there was no vibration either. The frozen screen faded to white with a few lines and about 10 minutes later, the edges started to turn black, forming a ring which got larger till about 4 hours later, the screen turned completely black. I tried connecting to iTunes but it wasn't detecting the phone and I can't do anything with it now... When it turned completely black, I charged it and after a while, the low batt screen came on but it was fuzzy and flickering with the white ring... What to do know ???????

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • "Extra" Internal Hard Drives won't mount - swap, /, and /home work.

    Hello All,
    *** I'm updating my post finally. Sorry it's so long, I'm not entirely sure what is and isn't relevant.
    *** Also I think it's a mix up with RAID causing the issue, as I'll address below, but in case I'm wrong I wanted to include the other information that came to mind before I noticed the RAID issue (because the RAID issue doesn't make a lot of sense to me).
    First off, I'm running Arch64 and KDE4 with my system up to date. Also I have Gamin installed and not FAM. I use ReiserFS on all of my partitions and drives.
    I have six hard drives in my computer, all of which are SATA drives. One is a WD 150GB Raptor with my swap, /, and /home partitions on it, the other five are for extra storage on what I call my media-server (they mount to /media/media-server/1 ,2 ,and so on). They only have one partition each. Of those five the first (/media/media-server/1) is a WD 1TB drive, the other four are WD 500GB drives of identical model.
    All of the Raptor's patitions, swap, /, and /home mount just fine.
    On top of that the 1TB drive mounts just fine. But the four 500GB drives will not mount at all. They show up in Dolphin, Disk Utility, KwikDisk, KDiskFree, and Partition Manager. However, their size is not shown and/or marked N/A, except in Partition Manager, where their size is shown. They are not seen by 'df'.
    Output from 'df':
    df -h
    Filesystem Size Used Avail Use% Mounted on
    udev 10M 308K 9.7M 4% /dev
    /dev/sda2 25G 7.7G 17G 32% /
    none 4.0G 0 4.0G 0% /dev/shm
    /dev/sda3 112G 90G 22G 81% /home
    /dev/sdb1 932G 919G 13G 99% /media/media-server/1
    *** As for removable media, it's being a bit odd. When I first wrote this post removable media, specifically USB flash drives and SD media cards mounted fine. A while after that they'd show up in Device Notifier, but wouldn't mount. Just a little while ago they wouldn't show up in Device Notifier and wouldn't mount. Now they show up fine and mount fine again. This is possibly unrelated, I'm not sure.
    Depending on what method I try to mount my hard drives I either get an 'only root can mount that' error or else a HAL drive busy or already mounted error, followed by a 'drive is not mounted' error when I use umount to double check.
    *** Permissions are working better now , Dolphin isn't giving me the 'only root can mount' errors anymore. Still can't mount the drives though.
    All of this output is from when the drives are listed in /etc/fstab:
    Konsole output:
    mount /dev/sdf1
    mount: only root can mount /dev/sdf1 on /media/media-server/5
    sudo mount /dev/sdf1
    mount: /dev/sdf1 already mounted or /media/media-server/5 busy
    umount /dev/sdf1
    umount: /dev/sdf1 is not mounted (according to mtab)
    sudo umount /dev/sdf1
    umount: /dev/sdf1: not mounted
    Dolphin output:
    An error occurred while accessing 'MediaServer5', the system responded: org.freedesktop.Hal.Device.Volume.PermissionDenied: Device /dev/sdf1 is listed in /etc/fstab. Refusing to mount.
    Device Notifier output (pops up when I try to mount the drives in Dolphin):
    org.freedesktop.Hal.Device.Volume.PermissionDenied: Device /dev/sdf1 is listed in /etc/fstab. Refusing to mount.
    Partition Manager:
    The file system on partition /dev/sdf1 could not be mounted.
    Details
    ==========================================================================================
    Command: mount -v /dev/sdf1 /media/media-server/5
    ==========================================================================================
    mount: /dev/sdf1 already mounted or /media/media-server/5 busy
    mount: you didn't specify a filesystem type for /dev/sdf1
    I will try type reiserfs
    At boot, when the daemons are starting I get:
    mount: /dev/sdc1 already mounted or /media/media-server/2 busy
    mount: /dev/sdd1 already mounted or /media/media-server/3 busy
    mount: /dev/sde1 already mounted or /media/media-server/4 busy
    mount: /dev/sdf1 already mounted or /media/media-server/5 busy
    This is from when the drives are not listed in /etc/fstab:
    Dolphin output:
    An error occurred while accessing 'MediaServer5', the system responded: org.freedesktop.Hal.Device.InterfaceLocked: The enclosing drive for the volume is locked
    Device Notifier output (pops up when I try to mount the drives in Dolphin):
    An error occurred while accessing 'MediaServer5', the system responded: org.freedesktop.Hal.Device.InterfaceLocked: The enclosing drive for the volume is locked
    I have tried listing (with the UUID method and the /dev method) and not listing the drives in /etc/fstab, and I have 'hal' and 'dbus' daemons in /etc/rc.conf (and I've tried using only the hal daemon and not the dbus in /etc/rc.conf). I've also tried not listing 'hal', 'dbus', and 'kdm' and only booting to terminal and then mounting the drives manually, that doesn't work either.
    Here is my /etc/fstab (back to using UUID's):
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /dev/pts devpts defaults 0 0
    none /dev/shm tmpfs defaults 0 0
    UUID=699cdd5e-3f4a-4b85-8dcb-5d00c00c94a9 swap swap defaults 0 0
    UUID=ce94e7a3-3e07-41e5-90d7-1116e5da3121 / reiserfs defaults 0 0
    UUID=a1dce435-df90-4f0d-892c-61ff3ea0c8d1 /home reiserfs defaults 0 0
    ## Media-Server
    # media-server/1
    UUID=81998a75-f887-4a35-b3fa-e159190f25a3 /media/media-server/1 reiserfs defaults 0 0
    #/dev/sdb1 /media/media-server/1 reiserfs defaults 0 0
    # media-server/2
    UUID=8cdd114a-b190-44f6-9240-1910a5d048f7 /media/media-server/2 reiserfs defaults 0 0
    #/dev/sdc1 /media/media-server/2 reiserfs defaults 0 0
    # media-server/3
    UUID=59164593-b56d-4c49-8837-277b3c392dfb /media/media-server/3 reiserfs defaults 0 0
    #/dev/sdd1 /media/media-server/3 reiserfs defaults 0 0
    # media-server/4
    UUID=ba6007bd-1e36-431c-85f4-857c83845c86 /media/media-server/4 reiserfs defaults 0 0
    #/dev/sde1 /media/media-server/4 reiserfs defaults 0 0
    # media-server/5
    UUID=6fab5364-1acb-4ba3-9f83-bb171a6d398a /media/media-server/5 reiserfs defaults 0 0
    #/dev/sdf1 /media/media-server/5 reiserfs defaults 0 0
    ## VirtualBox USB
    none /proc/bus/usb usbfs auto,busgid=108,busmode=0775,devgid=108,devmode=0664 0 0
    Here's the daemons line from /etc/rc.conf:
    DAEMONS=(syslog-ng !dbus hal network netfs crond wicd openntpd sshd avahi-daemon avahi-dnsconfd samba alsa mysqld lircd mythbackend !mpd !sensors !sensord !fancontrol cups keytouch kdm)
    Also, /etc/mtab because only the first media-server drive is listed in it (the one that does mount):
    proc /proc proc rw,relatime 0 0
    sys /sys sysfs rw,relatime 0 0
    udev /dev devtmpfs rw,nosuid,relatime,size=10240k,nr_inodes=1014438,mode=755 0 0
    /dev/sda2 / reiserfs rw,relatime 0 0
    fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
    none /dev/pts devpts rw 0 0
    none /dev/shm tmpfs rw 0 0
    /dev/sda3 /home reiserfs rw 0 0
    /dev/sdb1 /media/media-server/1 reiserfs rw 0 0
    none /proc/bus/usb usbfs rw,busgid=108,busmode=0775,devgid=108,devmode=0664 0 0
    I attempted to add the other drives to /etc/mtab but they get overwritten upon a reboot. I've drived mounting the drives from konsole and dolphin.
    All my drives used to work. At one point I had Chakra installed and had this issue after an update, however after thinking about it the problem may have actually started after the power flashed on and off here. I couldn't fix it so I installed Arch64 and KDE4 (the normal KDE from the Arch repos, not KDEMod) thinking maybe it was a Chakra specific issue. That fixed it at the time. It later happened on my Arch install. I reinstalled Arch again and the issue was gone. However the issue is back. Again I think it was after a power outage/flash but it was also after an update that included a kernel update. Best I can remember each time it's happened has been after a kernel update and power flash. So I can't say for sure which is the cause.
    Oddly though if I boot from a live disc (in my case a Chakra Live DVD) I can mount and access all of the drives just fine.
    Another oddity, is that in 'Disk Utility' (palimpsest) there is a 1.5TB RAID-5 array listed. The only thing I can figure is that that is what is making the individual drives busy.
    Here's a screenshot from Disk Utility of the RAID-5 array:
    http://theavataroftime.com/sites/defaul … enshot.png
    After talking to a friend I remembered that quite a while back (over a year) we had messed around trying to setup a RAID array and dual boot WindowsXP. However, we never could get it working quite right, not even just in Linux without dual booting. I really can't say what all we did/tried, it's been too long. I realize that's not much help but...
    Anyway I'm pretty certain I deleted everything RAID related at the time and turned it off. However I must be mistaken or I guess the array wouldn't be showing up.
    I apologize, I really know nothing about RAID or RAID controllers. I do have an onboard RAID controller, but it's not a full fledged hardware RAID controller. It's onboard, but doesn't have it's on proccessor like good hardware RAID would. Or that's the way I understand it. Perhaps 'hybrid' is the proper term?
    I checked in BIOS and my onboard RAID controller is off.
    I take it that my attempts at setting up a RAID array before are still in the MBR (on that note I use GRUB and have never used LILO)? That's the only place I can think of that any leftover RAID configurations wouldn't have been wiped during reinstalling and reformatting the drives and partitions? I've reformatted my drives completely and changed the size of swap, /, and /home on several occasions since then, as well as formatting the media-server drives to ReiserFS (not sure what FS I was using when trying to setup RAID before. Perhaps FAT32 since I was trying to dual boot).
    I clicked the stop array button in Disk utility, and then all the options except start array went away. Then I clicked start, and instead of my four media-server drives being listed at the side of Dolphin there was one 1.4TB drive. I rebooted and now it's back to the 4 500GB media-server drives.
    I'm worried about losing a bunch of data, so I'm hesitant to start experimenting. How should I go about getting rid of the remnants of the RAID array safely?
    Also here's a screenshot of MediaServer5 from Disk Utility. The other 500GB drives have the same info minus the names and labels of course:
    http://theavataroftime.com/sites/defaul … enshot.png
    *** I had forgotten about dmesg output. It's quite long so instead of copying it, here's a link to it:
    http://theavataroftime.com/sites/defaul … /dmesg.txt
    Thanks for advice on the matter.
    Last edited by The Avatar of Time (2010-10-07 08:27:06)

    Thanks for the reply.
    Here is my output from the commands you suggested:
    fuser -v -m /media/media-server/2
    USER PID ACCESS COMMAND
    /media/media-server/2:
    root kernel mount /
    theavataroftime 2518 fr.e. startkde
    theavataroftime 2561 Frce. gpg-agent
    theavataroftime 2575 .rce. dbus-launch
    theavataroftime 2576 .rce. dbus-daemon
    theavataroftime 2584 Fr.e. kdeinit4
    theavataroftime 2585 Fr.e. klauncher
    theavataroftime 2587 fr.e. kded4
    theavataroftime 2592 .r.e. kglobalaccel
    theavataroftime 2605 .r.e. kwrapper4
    theavataroftime 2613 Fr.e. ksmserver
    theavataroftime 2622 .r.e. kwin
    theavataroftime 2656 fr.e. knotify4
    theavataroftime 2658 fr.e. plasma-desktop
    theavataroftime 2662 .rce. kuiserver
    theavataroftime 2665 .r.e. akonadi_control
    theavataroftime 2667 .r.e. akonadiserver
    theavataroftime 2670 Fr.e. mysqld
    theavataroftime 2714 .r.e. akonadi_contact
    theavataroftime 2715 .r.e. akonadi_contact
    theavataroftime 2716 .r.e. akonadi_ical_re
    theavataroftime 2717 .r.e. akonadi_ical_re
    theavataroftime 2718 .r.e. akonadi_maildir
    theavataroftime 2719 .r.e. akonadi_maildis
    theavataroftime 2720 .r.e. akonadi_nepomuk
    theavataroftime 2721 .r.e. akonadi_vcard_r
    theavataroftime 2739 .r.e. nepomukserver
    theavataroftime 2741 .r.e. nepomukservices
    theavataroftime 2747 .r.e. kaccess
    theavataroftime 2759 fr.e. krunner
    theavataroftime 2765 Fr.e. virtuoso-t
    theavataroftime 2772 Fr.e. kio_http_cache_
    theavataroftime 2774 .r.e. kmix
    theavataroftime 2782 Fr.e. konsole
    theavataroftime 2785 .r.e. kjots
    theavataroftime 2790 .r.e. bash
    theavataroftime 2807 .r.e. kalarm
    theavataroftime 2809 fr.e. kopete
    theavataroftime 2812 .r.e. polkit-kde-auth
    theavataroftime 2815 .r.e. kwin
    theavataroftime 2821 .r.e. dolphin
    theavataroftime 2822 Fr.e. firefox
    theavataroftime 2834 .r.e. kwalletd
    theavataroftime 2839 .r.e. kwalletmanager
    theavataroftime 2842 Frce. gconfd-2
    theavataroftime 2850 .r.e. python
    theavataroftime 2854 .rce. wicd-client
    theavataroftime 2858 .r.e. klipper
    theavataroftime 2861 .r.e. nepomukservices
    theavataroftime 2862 .r.e. nepomukservices
    theavataroftime 2865 .r.e. nepomukservices
    theavataroftime 2867 .r.e. nepomukservices
    theavataroftime 2868 .r.e. nepomukservices
    theavataroftime 2869 .r.e. nepomukservices
    theavataroftime 2870 .r.e. nepomukservices
    theavataroftime 2871 .r.e. korgac
    theavataroftime 2883 fr.e. kmozillahelper
    theavataroftime 2979 .r.e. amarokapp
    theavataroftime 2989 .r.e. plugin-containe
    theavataroftime 3010 .r.e. npviewer.bin
    theavataroftime 3048 Fr.e. kdeinit
    theavataroftime 3051 Fr.e. dcopserver
    theavataroftime 3053 Fr.e. klauncher
    theavataroftime 3055 fr.e. kded
    theavataroftime 3075 .r.e. ruby
    theavataroftime 3081 fr.e. kio_file
    theavataroftime 15311 .r.e. kio_http
    theavataroftime 15312 .r.e. kio_http
    theavataroftime 15313 .r.e. kio_http
    theavataroftime 15314 .r.e. kio_http
    theavataroftime 15315 .r.e. kio_http
    theavataroftime 15316 .r.e. kio_http
    fuser -v -m /dev/sdb1
    USER PID ACCESS COMMAND
    /dev/sdb1: root kernel mount /media/media-server/1
    I ran 'fsck.reiserfs --check' one /dev/sdf1, which is the /media/media-server/5 hard drive.
    Here are the results:
    fsck.reiserfs --check /dev/sdf1
    reiserfsck 3.6.21 (2009 www.namesys.com)
    ** If you are using the latest reiserfsprogs and it fails **
    ** please email bug reports to [email protected], **
    ** providing as much information as possible -- your **
    ** hardware, kernel, patches, settings, all reiserfsck **
    ** messages (including version), the reiserfsck logfile, **
    ** check the syslog file for any related information. **
    ** If you would like advice on using this program, support **
    ** is available for $25 at www.namesys.com/support.html. **
    Will read-only check consistency of the filesystem on /dev/sdf1
    Will put log info to 'stdout'
    Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
    reiserfsck --check started at Mon Sep 27 19:21:20 2010
    Replaying journal: Done.
    Reiserfs journal '/dev/sdf1' in blocks [18..8211]: 0 transactions replayed
    Checking internal tree.. finished
    Comparing bitmaps..finished
    Checking Semantic tree:
    finished
    No corruptions found
    There are on the filesystem:
    Leaves 77863
    Internal nodes 474
    Directories 2856
    Other files 18718
    Data block pointers 77184421 (0 of them are zero)
    Safe links 0
    reiserfsck finished at Mon Sep 27 19:29:03 2010
    Also I just used Partition Manager to check /media/media-server/5 as well.
    Check and repair partition '/dev/sdf1' (465.76 GiB, reiser)
    Job: Check file system on partition '/dev/sdf1'
    Command: fsck.reiserfs --fix-fixable -q -y /dev/sdf1
    reiserfsck 3.6.21 (2009 www.namesys.com)
    ** If you are using the latest reiserfsprogs and it fails **
    ** please email bug reports to [email protected], **
    ** providing as much information as possible -- your **
    ** hardware, kernel, patches, settings, all reiserfsck **
    ** messages (including version), the reiserfsck logfile, **
    ** check the syslog file for any related information. **
    ** If you would like advice on using this program, support **
    ** is available for $25 at www.namesys.com/support.html. **
    Will check consistency of the filesystem on /dev/sdf1
    and will fix what can be fixed without --rebuild-tree
    Will put log info to 'stdout'
    reiserfsck --fix-fixable started at Wed Oct 6 22:29:02 2010
    Replaying journal: Replaying journal: Done.
    Reiserfs journal '/dev/sdf1' in blocks [18..8211]: 0 transactions replayed
    Checking internal tree..
    ***I'm cutting most of this out, it's insanely long: \|/-\|/-\|finished
    Comparing bitmaps..Bad nodes were found, Semantic pass skipped
    3 found corruptions can be fixed only when running with --rebuild-tree
    reiserfsck finished at Wed Oct 6 22:36:43 2010
    block 32772: The level of the node (48287) is not correct, (1) expected
    the problem in the internal node occured (32772), whole subtree is skipped
    block 262149: The level of the node (28423) is not correct, (1) expected
    the problem in the internal node occured (262149), whole subtree is skipped
    block 11326: The level of the node (63701) is not correct, (1) expected
    the problem in the internal node occured (11326), whole subtree is skipped
    vpf-10630: The on-disk and the correct bitmaps differs. Will be fixed later.
    Check file system on partition '/dev/sdf1': Error
    Check and repair partition '/dev/sdf1' (465.76 GiB, reiser): Error
    Thanks for the advice.
    Last edited by The Avatar of Time (2010-10-07 05:53:05)

  • Mail suddenly doesn't work

    I have a hotmail.com email adress. It always worked great with Mail. But suddenly I can't receive any mail.
    I've already deleted my account and made a new one. Also I've made a gmail account. But it still doesn't work.
    With gmail I've got one mail send and one received. But the next time I opened Mail they were both gone, and Mail didn't worked also.
    I hope someone could help me.
    If you're able to speak dutch it should be great! As you see, I'm not good in English.

    All of a sudden the other day I could no longer import emails from the Comcast server to my mail program on my computer (10.5.4, macbook pro) but those emails DO exist on the Comcast server.
    I still receive emails from my business address through my web site, but NOTHING comes in from Comcast.
    I called Comcast and they tried to help me reset my Mail Preferences - but that didn't help. The person at Comcast told me there are problems since an Apple update of the software, and they have no solution for it.
    Is this true? When will it be fixed? How can I make it work???

Maybe you are looking for

  • Mid 2013 Macbook Air Battery Fix

    Hello everyone, I'm getting 5-6 hours on a 11' Macbook Air 2013. Here are below stats: Hardware Information:           MacBook Air (11-inch, Mid 2013)           MacBook Air - model: MacBookAir6,1           1 1.3 GHz Intel Core i5 CPU: 2 cores        

  • Weather icon that shows the current weather?

    My blackberry weather app used the icon to show the current weather conditions (sunny, rain, etc). The iphone calendar icon can show the current date. Is there a weather app that can use the iphone icon to show the current weather? I haven't found on

  • I'm unable to reinstall apps.  I get the Download error message. What to do?

    I"m reinstalling Adobe apps on a new computer and I get the Download error message.  I"ve uninstalled everything, used the Adobe Clean tool, reinstalled Creative Cloud and still get the Download error message.  Any advice for me?

  • Error Payment budget exceed

    Hi Experts, I have an issue about payment budget. We had open item Rs. 37000 for previous year 2009 & same would carryforward to 2010 year through FMJ2. But in FMJ2 there is no document number & I tried to reverse the same document but there was no d

  • Multi media key wont function N95

    hi all, Has any one encountered problems with the multimedia key on the keypad.(where you have an animated/scrolling menu)nokia N95 handset Mine has ceased to function ever since i changed the default image in the background to an image stored in the