Mounting XRAID onto a solaris server

Hi
I need to migrate data from a hitatchi RAID currently managed by a solaris server to an XRAID that will be managed by an Xserve. If they are on the same network can I just mount the XRAID temporarily on the solaris server using mount -F nfs Xservername:/newdirectory /mnt and then just use the cp command to transfer the data or is that just not sensible.
Regards
Mac OS X (10.4)

There's no problem exporting an Xserve RAID volume as NFS and then mounting it on the Solaris box.
You need to set up the sharepoint using Workgroup Manager on the Xserve RAID, but then you should be good to go. Of course, NFS security is... no security... so be careful with the default export rules.
Also, depending on how large the volume is, Solaris may have problems seeing exports that are larger than 1 or 2 TB. What version of Solaris is it?

Similar Messages

NFS4: Problem mounting NFS mount onto a Solaris 10 Client

Hi,
I am having problems mounting NFS mount point from a Linux-Server onto a Solaris 10 Client.
In the following
=My server IP ..*.120
=Client IP ..*.100
Commands run on Client:
==================
# mount -o vers=3 -F nfs 172.25.30.120:/scratch/pvfs2 /scratch/pvfs2
nfs mount: 172.25.30.120: : RPC: Rpcbind failure - RPC: Unable to receive
nfs mount: retrying: /scratch/pvfs2
nfs mount: 172.25.30.120: : RPC: Rpcbind failure - RPC: Unable to receive
nfs mount: 172.25.30.120: : RPC: Rpcbind failure - RPC: Unable to receive
# mount -o vers=4 -F nfs 172.25.30.120:/scratch/pvfs2 /scratch/pvfs2
nfs mount: 172.25.30.120:/scratch/pvfs2: No such file or directory
# rpcinfo -p
program vers proto port service
100000 4 tcp 111 rpcbind
100000 3 tcp 111 rpcbind
100000 2 tcp 111 rpcbind
100000 4 udp 111 rpcbind
100000 3 udp 111 rpcbind
100000 2 udp 111 rpcbind
1073741824 1 tcp 36084
100024 1 udp 42835 status
100024 1 tcp 36086 status
100133 1 udp 42835
100133 1 tcp 36086
100001 2 udp 42836 rstatd
100001 3 udp 42836 rstatd
100001 4 udp 42836 rstatd
100002 2 tcp 36087 rusersd
100002 3 tcp 36087 rusersd
100002 2 udp 42838 rusersd
100002 3 udp 42838 rusersd
100011 1 udp 42840 rquotad
100021 1 udp 4045 nlockmgr
100021 2 udp 4045 nlockmgr
100021 3 udp 4045 nlockmgr
100021 4 udp 4045 nlockmgr
100021 1 tcp 4045 nlockmgr
100021 2 tcp 4045 nlockmgr
100021 3 tcp 4045 nlockmgr
100021 4 tcp 4045 nlockmgr
# showmount -e 172.25.30.120 (Server)
showmount: 172.25.30.120: RPC: Rpcbind failure - RPC: Unable to receive
Commands OnServer:
================
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 tcp 49927 nlockmgr
100021 3 tcp 49927 nlockmgr
100021 4 tcp 49927 nlockmgr
100021 1 udp 32772 nlockmgr
100021 3 udp 32772 nlockmgr
100021 4 udp 32772 nlockmgr
100011 1 udp 796 rquotad
100011 2 udp 796 rquotad
100011 1 tcp 799 rquotad
100011 2 tcp 799 rquotad
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 1 udp 809 mountd
100005 1 tcp 812 mountd
100005 2 udp 809 mountd
100005 2 tcp 812 mountd
100005 3 udp 809 mountd
100005 3 tcp 812 mountd
100024 1 udp 854 status
100024 1 tcp 857 status
# showmount -e 172.25.30.120
Export list for 172.25.30.120:
/scratch/nfs 172.25.30.100,172.25.24.0/4
/scratch/pvfs2 172.25.30.100,172.25.24.0/4
Thank you, ~al

I also tried to run Snoop on the client and wireshark on Server and following is what I see:
One Server: Upon issuing mount command on client:
# tshark -i eth1
Running as user "root" and group "root". This could be dangerous.
Capturing on eth1
0.000000 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
0.205570 172.25.30.100 -> 172.25.30.120 Portmap V2 GETPORT Call MOUNT(100005) V:3 UDP
0.205586 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
0.207863 172.25.30.100 -> 172.25.30.120 Portmap V2 GETPORT Call MOUNT(100005) V:3 UDP
0.207869 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
2.005314 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
4.011005 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
5.206109 Dell_70:ad:29 -> SunMicro_70:ff:17 ARP Who has 172.25.30.100? Tell 172.25.30.120
5.206277 SunMicro_70:ff:17 -> Dell_70:ad:29 ARP 172.25.30.100 is at 00:14:4f:70:ff:17
5.216157 172.25.30.100 -> 172.25.30.120 Portmap V2 GETPORT Call MOUNT(100005) V:3 UDP
5.216170 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
On Clinet Upon issuing mount command on client:
# snoop -d bge1
Using device /dev/bge1 (promiscuous mode)
? -> * ETHER Type=9000 (Loopback), size = 60 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
atlas-pvfs2 -> pvfs2-io-0-3 PORTMAP C GETPORT prog=100005 (MOUNT) vers=3 proto=UDP
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (UDP port 111 unreachable)
atlas-pvfs2 -> pvfs2-io-0-3 PORTMAP C GETPORT prog=100005 (MOUNT) vers=3 proto=UDP
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (UDP port 111 unreachable)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> * ETHER Type=9000 (Loopback), size = 60 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
pvfs2-io-0-3 -> * ARP C Who is 172.25.30.100, atlas-pvfs2 ?
atlas-pvfs2 -> pvfs2-io-0-3 ARP R 172.25.30.100, atlas-pvfs2 is 0:14:4f:70:ff:17
atlas-pvfs2 -> pvfs2-io-0-3 PORTMAP C GETPORT prog=100005 (MOUNT) vers=3 proto=UDP
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (UDP port 111 unreachable)
Also I see the following on Client:
# rpcinfo -p pvfs2-io-0-3
rpcinfo: can't contact portmapper: RPC: Rpcbind failure - RPC: Failed (unspecified error)
When I try the above rpcinfo command on Client and Server Snoop And wireshark(ethereal) outputs are as follows:
Client # snoop -d bge1
Using device /dev/bge1 (promiscuous mode)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
atlas-pvfs2 -> pvfs2-io-0-3 TCP D=111 S=872 Syn Seq=2065245538 Len=0 Win=49640 Options=<mss 1460,nop,wscale 0,nop,nop,sackOK>
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (TCP port 111 unreachable)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=2004 (Unknown), size = 48 bytes
? -> (multicast) ETHER Type=0003 (LLC/802.3), size = 90 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> * ETHER Type=9000 (Loopback), size = 60 bytes
pvfs2-io-0-3 -> * ARP C Who is 172.25.30.100, atlas-pvfs2 ?
atlas-pvfs2 -> pvfs2-io-0-3 ARP R 172.25.30.100, atlas-pvfs2 is 0:14:4f:70:ff:17
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
atlas-pvfs2 -> pvfs2-io-0-3 TCP D=111 S=874 Syn Seq=2068043912 Len=0 Win=49640 Options=<mss 1460,nop,wscale 0,nop,nop,sackOK>
pvfs2-io-0-3 -> atlas-pvfs2 ICMP Destination unreachable (TCP port 111 unreachable)
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
? -> * ETHER Type=9000 (Loopback), size = 60 bytes
Server # tshark -i eth1
Running as user "root" and group "root". This could be dangerous.
Capturing on eth1
0.000000 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
0.313739 Cisco_3d:68:10 -> CDP/VTP/DTP/PAgP/UDLD CDP Device ID: MILEVA Port ID: GigabitEthernet1/0/16
2.006422 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
3.483733 172.25.30.100 -> 172.25.30.120 TCP 865 > sunrpc [SYN] Seq=0 Win=49640 Len=0 MSS=1460 WS=0
3.483752 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
4.009741 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
6.014524 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
6.551356 Cisco_3d:68:10 -> Cisco_3d:68:10 LOOP Reply
8.019386 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
8.484344 Dell_70:ad:29 -> SunMicro_70:ff:17 ARP Who has 172.25.30.100? Tell 172.25.30.120
8.484569 SunMicro_70:ff:17 -> Dell_70:ad:29 ARP 172.25.30.100 is at 00:14:4f:70:ff:17
10.024411 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
12.030956 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
12.901333 Cisco_3d:68:10 -> CDP/VTP/DTP/PAgP/UDLD DTP Dynamic Trunking Protocol
12.901421 Cisco_3d:68:10 -> CDP/VTP/DTP/PAgP/UDLD DTP Dynamic Trunking Protocol
^[[A 14.034193 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
15.691119 172.25.30.100 -> 172.25.30.120 TCP 866 > sunrpc [SYN] Seq=0 Win=49640 Len=0 MSS=1460 WS=0
15.691138 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
16.038944 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
16.550760 Cisco_3d:68:10 -> Cisco_3d:68:10 LOOP Reply
18.043886 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
20.050243 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
21.487689 172.25.30.100 -> 172.25.30.120 TCP 867 > sunrpc [SYN] Seq=0 Win=49640 Len=0 MSS=1460 WS=0
21.487700 172.25.30.120 -> 172.25.30.100 ICMP Destination unreachable (Port unreachable)
22.053784 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
24.058680 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
26.063406 Cisco_3d:68:10 -> Spanning-tree-(for-bridges)_00 STP Conf. Root = 32770/00:0a:b8:3d:68:00 Cost = 0 Port = 0x8010
26.558307 Cisco_3d:68:10 -> Cisco_3d:68:10 LOOP Reply
~thank you for any help you can provide!!!

How do you install the NT domain connector onto the Directory Server Integrated Edition 5.0 for Solaris?

The NT installation lists the NT Domain connector as an option. The Solaris version doesn't. I spoke briefly with a project manager at Sun who said putting an NT Domain connector onto a Directory Server on Solaris was possible, but I'm not sure how.

You'll have to install the NT connector on an NT machine. The Join Engine that joins this connector can reside on Solaris.

Mount NTFS volumes in Solaris 10 update 8

Hi All,
I have a requirement to mount a windows share to two different Solaris 10 update 8 hosts . The below are the steps that i have done for the same but it got failed .
Please suggest a procedure and solution .
1 . Created the network share named " csv_source " on windows 2008 server . The share is given permission to everyone full access
2 . I have enabled the samba service on solaris server
3 . Created a directory on solaris server using mkdir /data
4 . Used the " mount " command to mount the volume but its failed .

Can you boot from DVD and do an "upgrade?"

[SOLVED] mount.nfs4: access denied by server

Hi folks. I seem to be having a bit of a problem getting nfs4 to work. I am trying to mount a share from alpha (my fileserver) onto charlie (my workstation). Both of these are new Arch systems and I haven't had any nfs working yet, although I have with other distros on the same hardware.
Fileserver (alpha) config:
# /etc/exports
/files 192.164.1.0/24(rw,sync,fsid=0,no_subtree_check)
# /etc/hosts.allow
sshd: 192.168.1.0/255.255.255.0
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
idmapd: 192.168.1.0/255.255.255.0
statd: 192.168.1.0/255.255.255.0
[General]
Verbosity = 3
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nobody
[Translation]
Method = nsswitch
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sda1 /boot ext3 defaults 0 1
/dev/sda2 swap swap defaults 0 0
/dev/sda5 / ext3 defaults 0 1
/dev/sda6 /var ext3 defaults 0 1
/dev/sda7 /home ext3 defaults 0 1
/dev/sda8 /files ext3 defaults 0 1
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs defaults 0 0
nfsd /proc/fs/nfsd nfsd rw,nodev,noexec,nosuid 0 0
DAEMONS=(syslog-ng network netfs rpcbind nfs-common nfs-server hal @alsa @crond @openntpd @sshd)
[root@alpha ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda5 19228276 879492 17372036 5% /
none 507792 140 507652 1% /dev
none 507792 0 507792 0% /dev/shm
/dev/sda1 93307 15887 72603 18% /boot
/dev/sda6 19228276 372632 17878896 3% /var
/dev/sda7 19228276 176224 18075304 1% /home
/dev/sda8 902688436 204872 856629640 1% /files
[root@alpha ~]#
Workstation (charlie) config:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=437982b2-5c84-4f53-954d-cf43f8b4e707 / ext3 defaults 0 1
UUID=97d79d76-357a-4f4e-8513-f181bff6af62 /boot ext3 defaults 0 1
UUID=d8525095-9b97-4439-932f-8f4e0236cce1 /home ext3 defaults 0 1
UUID=ffba933b-af93-407c-b1b8-69d1cc5be146 swap swap defaults 0 0
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs defaults 0 0
alpha:/ /files nfs4 defaults 0 0
[General]
Verbosity = 3
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nobody
[Translation]
Method = nsswitch
DAEMONS=(syslog-ng network crond alsa hal fam rpcbind nfs-common netfs)
[root@charlie ~]# mount -a
mount.nfs4: access denied by server while mounting alpha:/
[root@charlie ~]#
This happens even after both systems are rebooted. Can anyone spot what I am missing?
Thanks for looking.
Last edited by dgregory46 (2009-10-21 01:04:09)

Now I really feel stupid. A little proofreading would have saved me a big headache. In /etc/exports I was exporting to 192.164.1.0/24 while my network is the more standard 192.168.1.0/24.
It works fine now, although I did take phaul's suggestion and added my main share "inside" the nfs4 root.

Mirroring Windows Server to a Solaris Server using filesync & NFS

I am trying to mirror the data from a Windows 2000 server to a Solaris 10 server using filesync over NFS. I have been able to do this from one solaris/sparc machine to another without problems, but this heterogeneous sync is failing. The Windoze machine is running Hummingbird NFS Maestro Server. I've tried both an old version of Maestro (5.x) and the newest version. On the solaris machine, I craft the .packingrules file by hand and issue "filesync -o src" to copy from the nfs mounted source to a local directory. The initial copy seems to go well, albeit with numerous complaints about ownership and permissions. On either the second or third running of "filesync -o src", it wants to delete all of the files that it just wrote. Argh! Sometimes it works, sometimes it does not.
Perhaps I need to mirror in some other way. If all else fails, next I'll compile rsync on the solaris machine, trying it over NFS.
I'd appreciate any suggestions of how best to mirror.
By the way, my goal here is to show to Windoze PC users that this Solaris server can do everything that the Windows server can do, and more. With hopes, I'll be able to migrate completely off of the Windoze server.
Thanks

smbmount doesnt exist for solaris 10.
The functionality would require a smbfs kernel module which is not available in solaris 10.
I think there might be a commercial product that provides this functionality, but its name escapes me at the moment..

How to mount SAN drive inside Solaris 10

Dear Support,
I have some solaris servers, and storage administrator have given 1 of the solaris server 4 LUN. I will need to mount those drives inside my solaris servers. I would like to know how to do it step by step.
Anyone can guide me?

1. After I do rescan with DEVFSADM and I do sympd list will device appear?
hostname#echo | format :
Searching for disks...done
here you can able see non labled disks. you need to labled first. after labled, here you are not see disks.
AVAILABLE DISK SELECTIONS:
0.c0t0d0
2. How can I see the device prior to formatting and mouting it?
After labled, you need to create the new file systems with user : newfs /dev/rdsk/c1t2d0sX
cerate mount point: mkdir /test
mount /dev/dsk/c1t2d0sX /test
3. From the FORMAT command how do I know which is my new device as the server already has plenty SAN disks assigned?
A): hostname#echo | format :
Searching for disks...done
here you can able see non labled disks. you need to labled first. after labled, here you are not see any disks.
AVAILABLE DISK SELECTIONS:
0.c0t0d0
4. From the FORMAT command how do I tie devices back to a SAN/Symmetrix device number?
echo | format | grep c1t2d0 (SAN device name)
5. Then the easy part to the guru's how to I physically map/moun the newly added device?
you have fallow the above steps..

Mounting Aperture library on file server

It appears that Aperture has all the organizational functionality that my group has long needed, but we wondered if the library can be mounted on a centralized file server so that multiple users can simultaneously access it from their workstations.
I read a thread entitled "One Computer, Two Users, Shared Library?" that discussed permissions, but I am interested to know if anyone has experience using Aperture by having the application on each client machine and the library on the server?
Bill

William,
Thanks for the DAM software suggestions. The Extensis Portfolio Server 8 looks promising so far. However, check out the way James Pittman (on a later thread) is doing it just with Aperture by having their master photoss reside on an XRaid file server and referencing them to each user's Aperture library.
Bill

Can I merge or combine 2 "album artwork" folders? I have saved music onto an external server from 2 computers but the artwork that I have manually imported remains in the default folder in the music/itunes/album artwork folder on the respective PCs. Thx

Can I merge or combine 2 "album artwork" folders? I have saved music onto an external server from 2 computers but the artwork that I have manually imported remains in the default folder in the music/itunes/"album artwork" folder on their respective PCs.
i.e. artwork uploaded on one PC won't apppear on the other PC because it is saved locally...
I'm confident that i won't beable to just merge the 2 because thy'll have the same folder names.
On the same note: can I have iTunes create these files on the external server/Hard drive also so that either computer can use them at the same time?
(like I have my library- can the other files be saved remotely)
Thx

i'm using iTunes 10 BTW

How come My Sites can only be created when logged directly onto the Sharepoint Server?

Hello Community
   In Synchronization I populate the container with OU's that contain
Service accounts, user accounts created in the Sharepoint farm and a
domain local group containing a OU with all of the trusted user accounts.
   AFter populating the container I perform a User Profile Synchronization.
   After the User Profile Synchronization finishes MIISClient shows "success"
including the OU containing the trusted user accounts.
   Although I cannot Find all of the trusted users individually in Manage User Profile I
can find them with the peoplepicker when I add them to the web application
and the My Site Host application.
   The problem is if I logon directly onto the Sharepoint server with an account created
in the Sharepoint farm I can create a My Site with that account. But if a trusted user
logs onto their computer and tries to create a My Site they get an error stating
the page can't be displayed.
    Even if I click "sign on as a different user" on the trusted user computer
and with a user account that was created in the Sharepoint farm and try to create a
My Site I get the error stating the page can't be displayed.
    The reason the page can't be displayed on the trusted users computer is because although
it can access the My Site Host application it cannot access its default.aspx page.
    So the question is how come when creating a My Site the My Site Host default.aspx page
cannot be accessed from the trusted user computer but when creating a My Site directly on
the Sharepoint Server the default.aspx page can be accessed and the trusted user and/or the
user account created in the farm can access the default.aspx page and create a My Site?
    Thank you
    Shabeaut

What does that mean "trusted user computer"?
How many servers you have in farm?
Are you using a single domain or there are multiple domains involved ?
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

How to find out the info regarding Solaris, server hang or shutdown.

Hi
As I am handling the Solaris 9 Server remotely.
As in last week the server has stopped to respond suddenly, we have tried to ping, ssh which was not working. As ultimately we have asked the Data Centre Team to hard reboot the same, to resolve the issue.
In the same ref I would like to know how we come to know the reason, what caused to reboot the same, i.e . any log file, etc..
I have check /var/adm/messages, but not found any detail for the same.
Thanks
Rajan
I

No core files?
No hope for an answer.
As you learned in the other Internet forum.
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-out-the-info-regarding-solaris-server-hang-or-shutdown.-621500/
To get such corefiles analyzed,
you would need to use your service contract and log a support case with Sun.
They have the special software tools to do that.

How to send mail through java program in solaris server

hi
i am writing java code to send the mail using my company SMTP
,the program is working fine when i run and deploy in windows environment
but at the same time when i deploy the war to sun solaris server ,it is not working
and throwing the Error saying
java.lang.Exception: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 553 sorry, that domain isn't allowed to be relayed thru this MTA without authentication #5.7.1 at jsp.SendMail._jspService(_SendMail.java:137)
i am using the Authentication also using user id and password of same domain and it is able to authenticate
in windows but not in Solaris
where i am making mistake plz
guide.
Saurabh

thanks Alan
but i think there is some other problem because same code is
working when i am using in windows as well as i am using authentication method
also but it is not working when running in Solaris Environment
here is the code i am using to send the mail
props.setProperty("mail.transport.protocol", "smtp");
props.setProperty("mail.host", "smtp.mycompany.com");//smtp protocol for IIBF
props.put("mail.smtp.starttls.enable","true");//setting start TLS to be true
props.put("mail.smtp.auth", "true");// authentication is false
props.put("mail.smtp.port", port);//setting the port number it can be either 25 or 587
props.put("mail.smtp.username", "noreply");
props.put("mail.smtp.password","noreply");
props.put("mail.debug", "true");
Authenticator auth = new SMTPAuthenticator();
Session session1 = Session.getDefaultInstance(props);
java.util.Properties sessionProperties = new java.util.Properties();
sessionProperties.put("mail.smtp.auth", "true");
message.setFrom(new javax.mail.internet.InternetAddress(From ,"name"));
message.addRecipient(javax.mail.Message.RecipientType.TO, new javax.mail.internet.InternetAddress(To));
message.setText(TextCo);
message.setSubject(subject);
message.setContent(boyd, "text/plain");
message.reply(true);
Transport trans = session1.getTransport("smtp");
trans.connect(SMTP_HOST_NAME, SMTP_AUTH_USER, SMTP_AUTH_PWD);
boolean ddd = trans.isConnected();
message.saveChanges();
trans.sendMessage(message, message.getAllRecipients());
above code is working properly in windows but not in Solaris
plz guide what next to do
thankx in advance
saurabh

Problem with downloading the internal table onto the presentation server.

Hey folks,
I have a problem where in i am downloading one year of sales done by the company. I wrote a program to download the file onto the presentation server . The error occurs in the FM GUI_DOWNLOAD where if the file exceeds 105843504 bytes its giving me a dump saying that
When the program was running , it was established that more memory was needed than the operating system is able to safely to provide.
The current program has to be terminted because of the program already requested 105843504 bytes from the operating system with malloc when the operating system reported after further memory request that there was no more memory space available.
Could somebody provide an alternative soltuion for this.
Its really urgent as i can download the file with 70,000,000 bytes
Regards
Rock

Hi Rock,
Please download the files on to Application Server, else as suggested by Ashish download into 2 or 3 files and merge them manually.
Declare same internal tables may be 5 times.
When you fill the internal table check for a counter and when you hit a certain number stop appending to it and start appending to the next.
After you are done so download all the internal tables.
I guess this would be a good way. I am not sure if there are any ther alternative good methods.
Hope this helps.
Shreekant

Error in Installing webutil on solaris server [solved alternatively]

I am trying to install webutil on the solaris server but I am getting following error when I am trying to run the application in Internet explorer.
Loading http://oradev.hmppd:7777/forms/java/frmwebutil.jar from JAR cache
Loading http://oradev.hmppd:7777/forms/java/frmall_jinit.jar from JAR cache
Loading http://oradev.hmppd:7777/forms/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
RegisterWebUtil - Loading WebUtil Version 1.0.6
Forms Applet version is : 10.1.2.0
java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.util.PropertyPermission java.home read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at oracle.forms.webutil.common.VBeanCommon.<clinit>(VBeanCommon.java:156)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I have completed all the setup steps for webutil as given in the document. When I use the same steps on windows it works but when I am trying to do it on solaris it
is giving error.
Kindly reply as soon as possible as I am in the middle of an implementation..
Your kind attention and suggestions are valueable
Thanks for the same
Shyamal Kumar
Message was edited by:
Shyamal Kumar

I have updated the class path. But what do i have to do in jvm.
Any way there is one more solution which worked.
Step 1 . Install Oracle Forms 10.1.2.0.2
Step 2. Copy jacob.jar in java home
Step 3. Copy jacob.dll into webutil directory in forms directory.
Thats it.

How to deploy OHW onto Oralce Application Server?

I down load the demo-bundle.
It is set in c:\ohw\. I startup the OC4J from c:\ohw\bin. And the help system can be launched from URL http://localhost:8888/.
Also I modify the Oracle Application (in Jdeveloper 10g1.3.2.0) to make it work with the helpset in demo-bundle.
I follow the instructions in "Deploying OHW Using the Unconfigured Bundle" to create a ear file which contrains a WAR file (it has helpsets directory, (and files), ohwconfig.xml file, the cabo directory, and the WEB-INF directory.
Then I caret a zip file which has application.xml file and META-INF file and the WAR file. Then rename it a ear file.
After all, I intend to deploy the ear file to Oracle Application Server.
It fails with message:
Failed in uploading archive. Invalid archive file: Unsupported archive type. unknown
1. Where is the right location in Oralce Application Server for servlet container ?
2. What is the right way to deploy a helpset onto Oralce Application Server?
Thanks

Same as you would deploy any .NET application. There are two ways to do this:
1 - Simple copy files to win2003 server and create virtual directory (if you copy to default location just create IIS application using inetmgr)
2 - create deployment project that will generate setup for you. execute setup on win2003 server and follow the steps.
Regards,
Vojin
[email protected]

Mounting XRAID onto a solaris server

Similar Messages

Maybe you are looking for