Mouse tirgger in oracle 10g

Hi,
Is there any solution to use
When mouse move
when mouse enter
when mouse leave
triggers in Oracle 10g.
Regards,

http://forms.pjc.bean.over-blog.com/article-4850195.html
Re: Trigger not working in Web.

Similar Messages

How to trace an application in Oracle 10g

Hi,
I want to trace a complete application in Oracle 10g end-to-end.
Here is the scenario,
The are two systems:
System A: Oracle 10g server
System B: Windows server
The application runs on system B.
How do I trace the complete application in oracle 10g?
I read about the trcsess tool but will like to know if there is a way to collate all *.trc produced by the application.
Thanks in advance!
-Thanks
Karthik

Tracing the Oracle transactions is easy, but you need to decide what level of trace you want and identify the database sessions to trace.
Tracing can generate huge amounts of logs, so think carefully if you really need to do this.
The tracing will only capture the database transactions. It won't track what happens in the application (e.g mouse clicks etc)
Options to enable tracing :-
-- ALTER SESSION
alter session set tracefile_identifier = 'robert_trace'; # so that the trace files from this session are easily identified
alter session set events '10046 trace name context forever, level 8';
-- ALTER SYSTEM
alter system set sql_trace=true;
-- DBMS_SESSION
exec dbms_session.set_sql_trace(sql_trace => TRUE);
-- DBMS_SUPPORT
exec dbms_support.start_trace(waits=>TRUE, binds=>FALSE);
-- DBMS_SYSTEM
exec sys.dbms_system.set_ev(72,21237,10046,12,'');
-- ORADEBUG
select username, spid from v$process;
ORADEBUG SETOSPID 21237
ORADEBUG EVENT 10046 TRACE NAME CONTEXT FOREVER, LEVEL 12
-- DBMS_MONITOR
exec dbms_monitor.session_trace_enable(session_id=>75, serial_num=>21237);

Installation of OracleAS 10g on Red Hat Linux ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Problems using Quick Migrate in SQL Developer 1.5 for MySQL to Oracle 10g

Hi all,
I am trying to use SQL Developer 1.5 migration tools (Quick Migrate) to perform online capture and build source model to migrate from MySQL 5.x to Oracle 10g on Windows platform. I get these errors and the Quick Migrate process fails:
oracle.dbtools.metadata.persistence.PersistableObject.doInsert(PersistableObject.java:238)
I did a search and used the sqldeveloper.cmd script but still fails. Then I created a new database and truncated the repository. I now get the above error plus two new ones listed below:
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
Error loading nls:OALL8 is in an inconsistent state
Error occurred during capture: Protocol violation
It fails during the capture process for MySQL 5.1 database
when it begins to capture the tables from MySQL.
Does anyone know how to resolve these issues when migrating from MySQL to Oracle 10g using Quick Migrate with SQL Developer 1.5 release?
Regards,
Ben Prusinski
Message was edited by:
benprusinski
Message was edited by:
benprusinski

Hi all,
I put the following in my sqldeveloper.cmd file:
SET ORACLE_HOME=%CD%
What is very confusing is that with SQL Developer 1.5, there are several levels and several SQL Developer executables! I am really not sure which of these to use:
I created the SQLDeveloper 1.5 directory called SQLDeveloper1_5 on Windows:
1) cd C:\sqldeveloper1_5\sqldeveloper-5338
there exists a sqldeveloper.exe
2) cd c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloper.exe
3) cd c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloer\bin\sqldeveloper.exe
Which SQLDeveloper 1.5 executable should I be using and where should I place the
sqldeveloper.cmd file?
Also I did try to use a different database and schema for the repository with Quick Migrate but it appears a bug exists in SQL Developer 1.5 version that causes errors with Quick Migrate for MySQL to Oracle? Is this correct?
As an update, I ran the following commands:
cd to
c:\sqldeveloper1_5\sqldeveloper-5338\sqldeveloper\sqldeveloper\bin
sqldeveloper.cmd sqldeveloper.exe
Start sqldeveloper.exe
Perform standard capture for MySQL using the new mig2 schema as the new repository
It starts the capture but fails on the errors below:
Error loading nls:OALL8 is in an inconsistent state
UPDATE
============================
I tried this again and it worked with the exception of one error message listed below:
Here are the steps that I followed:
1. Create a Windows cmd script
Put the following entries in the script:
SET ORACLE_HOME=%CD%
save the command windows script as sqldeveloper.cmd
Copy this script to the base installation directory for SQLDeveloper
Example:
1. cd c:\SQLDeveloper1_5\sqldeveloper-5338\sqldeveloper
2. Start SQLDeveloper with the command script that you created earlier
Example:
Open a Windows shell prompt window and execute the following scripts:
a) sqldeveloper.cmd sqldeveloper.exe
b) sqldeveloper.exe
3) In SQL Developer 1.5
From the Migrate menu,
a) Delete current repository and create a new schema in Oracle target database call it mig2.
b) Then create a new repository in SQL Developer 1.5
c) Right mouse click on the MySQL 5.x database and choose capture
It worked with the exception of one error message:
o.jdbc.driver.OracleDriver
Error while registering Oracle JDBC Diagnosability MBean.
So it looks like something is screwed up with my JDBC drivers and configuration for MySQL. How do I diagnose the JDBC driver issue for MySQL?
Thanks!!!
Ben
Thanks
Ben

Oracle 10G forms not running.......very urgent

Hi all,
shayan here......
i have just installed oracle databse 10g and oracle 10G developer........i have done it first time....the forms is not running even the test form is not running....i have start the OCJ4 but still the same result..............any sujjestion how to configure....
plz tell me

Shayan,
I assume that you are trying to run the form from within Forms Developer and that you are connected to the database.
Now you have to apply the URL that have to be used when running a form. At one of the tabs in the options screen (where you also can choose to save before generating and generate before running or to get debug messages) you can set the default URL by pressing a button.
At this moment I don't have a 10g installation in reach so I cannot give you the exact menuoptions and mouse clicks.
With kind regards,
Martin Schaap

Can not reset password in Oracle 10g Express

I have searched google for 4 hours, now I am certain:
"May be I am the only one in the world who have this problem."
I installed Oracle 10g Express on my Debian5.
I need to reset password for SYS/SYSTEM users
So I checked online tutorial says I need to use a utility called "orapwd" to recreate a password file.
Everything is smooth since now.
When I finally find this "orapwd" utility. I type "orapwd" as a root user. Terminal replies "orapwd command not found".
I then discovered the orapwd is some kind of x-execute file. After an extensive search on google I concluded that this kind of file is inexecutable.
Many tutorials I read online specify that the "orapwd" is actually "orapwd.exe", but on my Debian system it is "orapwd" with no extension.
Any suggestion is welcome.
ps: is there anyway I can reset password without going through "orapwd" s*t.
Best regards to all who have read to the end of this post

Eric wrote:
And Billy, what makes you think Windows Administrators do not know administration on command line?Experience dealing with Windows SAs over a decade and a half.
I got my first part time job as a Windows Administrator in the beginning era of Windows 95 in a small netcafe. The boss does not pay me but like me use workstations there for free.
In the early days, I administrate both Dos and Win3.1. I do my work on command line primarily and wrote a hell lot of *.bat files. In those days it were quite different. Because administration and configuration came from a command line DOS environment. We for example never configured networking for a Windows 3.1 or WFW 3.11 client via a GUI. It was done by directly editing system.ini and protocol.ini and making the correct changes.
And this made the guys and me almost fail our Windows CE certification because the silly multiple question exam asked which buttons to click in the GUI to configure networking and not how it works at actual system configuration level. In other words, it tested your knowledge of the GUI functions and not the actual system config and admin itself.
And then Windows NT was released and command line admin became the exception and not the rule. The All-Config-Eggs-in-a-Single-basket called the Windows Registry exemplified this flawed approach.
But since Window95 I find myself spending less and less time on command line, more and more on GUI and my work efficiency increase tremedously. I can record the mouse clicks, the key presses, then covert then into a script. I can change every setting of the system in just few clicks. In the world of Linux, this is still a dream, isn't it?You are missing the point. There are a large number of admin GUI tools available for Linux. But these seldom serve as crutches to configure the system, because of a i-am-clueless-factor.
If two systems, both are equally capable. To acheive the same thing, system A takes 2 working hours, system B takes 8 working hours. Doesn't this makes system B inferior compare to A?Because of the lack of knowledge and skill of a person to do the required on system B in 10 minutes now takes 8 hours instead? Ignorance of an operating system does not qualify as making system B inferior to system A.
In past decade, Linux became very popular in the server market is not becasue there are an increasing number of Linux system administrators who are good at command line administration but because Linux is becoming more user friendly. And as a result. This increased administrator's work efficiency and the same time reduce training cost which invites more people to learn Linux.Incorrect. There is a reason that 483 of the 500 of the fastest and most powerful computer systems on this planet runs Linux. And only 5 runs Windows.
And this has nothing to do with imagined user friendliness. It has everything to do with technical superiority and total cost of ownership.
So the more idiot proof the system is, the better the system will become.No. The less idiots there are, the better the quality of system administration, the better security, the more robust the systems are.

Shortcut to find a property from property pallate in oracle 10G forms

Hi,
I want to know the the shortcut to find a property from property pallete in oracle 10G form builder.
Because i cannot use mouse due to blindness. Please tell shortcut to locate a property from property pallete.
Qasim Javaid Malik

Hi,
Yes, the keys I mentioned open Property Palette.
I have no clue about short-cuts for properties in an open palette.
The Up and Down arrow keys work will you enter a LoV, and I could not figure out key strokes to come out of the LoV !
Maybe someone else has some idea of this.
Cheers,
PS: I was trying on 11g R1 as I do not have 10g any more.
Edited by: Prabodh on Sep 14, 2012 2:53 PM

Sample CD for Oracle 10g

Hi,
Could you please let me know whether the Sample CD for Oracle 10g database and application server are available. If yes, please provide me the link for order the CDs. I have forgotten the link.
Thanks

Sri-Oracle wrote:
it is not showing where can i download that... it is just tutorial......
Regards,
Sri.Do I need to teach you how to read & click the mouse?
"Installing the Oracle10g or Oracle 11g Sample Schemas
1.
If you have dropped the sample schemas from Oracle 10g or Oracle 11g, or if you did not install them in the first place, you should install them following the instructions in Oracle Database Sample Schemas 10g Release 1 (10.1), Oracle Database Sample Schemas 10g Release 2 (10.2) or Oracle Database Sample Schemas 11g Release 1 (11.1). The SQL scripts are on a separate companion CD and are also available for manual installation by right clicking here. "

Problem with do click on a field - Oracle 10g form - UNIX

Hello, friends.
I nedd a help. I have a problem with a Oracle 10g form when it was executed in UNIX environment.
The problem is that when I do click with the mouse in a different field, doesn't lead me to the other field. That is, don't let me to do click on a different field than the initial field of the form. Just work with TAB or ENTER.
Would you tell me what I can check?
Thanks.
Kisses.
Annie

Hello
Another question about the problem that I posted yesterday:
Why the system.cursor_item isn't change when I do click in other field? Just the system.mouse_item changes. This problem occurss in Oracle 10g at UNIX environment (don't occurss in Windows environment).
Thanks.
Kisses.
Annie

Mouse Move Operation in 10g

Hi Guys,
We are doing migration of Forms from Oracle 6i to 10g.
In 6i One form contain Mouse Move Trigger.
Let me know,Whether Mouse Move Option will work in Oracle 10g ?
Otherwise,How to handle this type of trigger in Form.?
If it work fine then,Tel me the Solution how to use this?
Thanks,
Gany

Hello,
The Oracle Forms OTN Forum is here : Forms
Regards

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error while sending a mail using UTP_MAIL package in Oracle 10g

Hi,
We are using UTP_MAIL package to send a mail from Oracle 10g.We have follwed the following steps ...
SQL> connect sys/password as sysdba
Connected.
SQL> @$ORACLE_HOME/rdbms/admin/utlmail.sql
Package created.
Synonym created.
SQL> @$ORACLE_HOME /rdbms/admin/prvtmail.plb
Package body created.
SQL > alter system set smtp_out_server = '<mail_server_ip:25>' scope =spfile;
System altered..
Now we try the code
begin
utl_mail.send(
sender => 'sender's mail',
recipients => 'receiver mail',
CC => 'optional',
subject => 'Testing utl_mail',
message => 'Test Mail'
end;
But we get the following error...
ERROR at line 1:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 97
ORA-06512: at "SYS.UTL_SMTP", line 139
ORA-06512: at "SYS.UTL_MAIL", line 405
ORA-06512: at "SYS.UTL_MAIL", line 594
ORA-06512: at line 2
We also tried connecting to the mail server through telnet .But it is not getting connected..
Please help us to solve the issue.

From your own posting you may have the clue, if you try to access your mail server through telnet and it is not successful, it means the service is down or there are networking issues.
On pre 10gR2 versions there was a bug 4083461.8. It could affect you if you are on 10gR1
"Bug 4083461 - UTL_SMTP.OPEN_CONNECTION in shared server fails with ORA-29278 Doc ID: Note:4083461.8"
This was fixed on 10gR2 base and on 9.2.0.8.0
~ Madrid

FRM-41211 Integration Error SSL - OracleAS 10g

Hi.
I have error Frm-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms.
I have error: FRM-41211 SSL integration error .....
OracleAS server began on Windoes XP SP2.
Do you help me ?

Hi,
I remember having seen this issue in teh apst. My best recommendation is to work with customer support (metalink.oracle.com)
Frank

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Migration from Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 Server

I am working on migrating Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 from Old server to new server. We have db around 500 GB and 3 schemas. I installed Oracle 10G on new server, created tablespaces, schema's blah blah and now doing export and import at schema level from old server to new server.
Import is taking more than 4 to 5 hours on new server. My manager is saying, window time is bit longer and he wants me to try possiblities to make this process faster. Can some one help me on this, to use the best possible method to complete this process faster?
Will below step work, if I try?
If I install, oracle 9i and 10g both on new server in different home directories and take the hot backup from old machine and restore on new machine in 9i home directory and use the upgrade configuration assistant from 10g and do the upgrade? Pls advice.
Thanks in advance,
Hari babu
Edited by: user6367891 on Mar 2, 2010 5:28 AM

It looks good.
I have one question in below steps:
To migrate an Oracle9i or older database to an Oracle Database 10g Release 1 (10.1) database for 64-bit Windows:
1 Perform steps 1 - 11 in "Migrating an Oracle Database 10g Release 1 (10.1) Database".
2 Shut down the database on the 64-bit computer:
SQL> SHUTDOWN IMMEDIATE;
3 Start the database migration:
SQL> STARTUP MIGRATE;
4 Migrate the database as described in Chapter 3, "Upgrading a Database to the New Oracle Database 10g Release" in Oracle Database Upgrade Guide.
In step 4, it says, migrate database as described in chapter 3. In chapter 3, it says, to do the upgrade the process using dbca or manually. Pls confirm whether do the upgrade process after issuing startup migrate or not.
Thanks in advance.

Mouse tirgger in oracle 10g

Similar Messages

Maybe you are looking for