Move components using mouse - drag and drop action?

Hi,
As attached, I want to move one component at the bottom to top using mouse in drag and drop action.
But I don't know why it returns to the origianl position. it never move.
Is there anyway I can change configuration to accomplish this?

Hi,
I tried this as you said, but it wont' work.

Similar Messages

I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.

Drag the file into the audio window in the Document inspector...

I used to drag and drop newly loaded CD's from Recently Added to one of my iPod Classic playlists. I have no idea how to do this with the new version of iTunes. I thought perhaps checking Sync might give me a clue but it warned me Syncing would wipe conte

I used to drag and drop music loaded from CD's from the Recently Added folder to a Playlist on my iPods Classic. Can't see how to do this with new iTunes version. Probably need to sync somehow but when I checked on Sync it warned me it would wipe out my iPod contents. Don 't know why Apple makes something that used to be simple so difficult. Can't even figure out how to display both my library and iPod contents on same screen.

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

Error using Richfaces Drag and Drop support in JSF 1.1 application

Iam using rich faces drag n drop support in my JSF application . The jsp works as expected but I get this weird exception while navigating through my pages.
Scenario : User logs into the application , from the home page ---> when the user click on a button he is navigated to the jsp which has the drag n drop support. This was working fine till , I have added a menu_incl .jsp inthe sub view . The code snippet is as shown below :
<body>
     <div id="wrap">
     <f:view>
     <f:subview id="menu">
          <jsp:include page="/search/incld/menu.incl.jsp" />
     </f:subview>
     <rich:dragIndicator id="indicator" />
     <h:form id="myfolder">
          <h:panelGrid columnClasses="panelc,panelc,panelc,panelc" columns="4" width="100%">
               
               <rich:panel style="width:133px">
               <f:verbatim>
                         <div style="overflow-x: scroll; overflow-y: scroll; height: 400px;">
               </f:verbatim>
                    <f:facet name="header">
                         <h:outputText value="Queries" />
                    </f:facet>
                    <h:dataTable id="querytable" value="#{dndBean.queryList}"
                         var="query" binding="#{workSpaceBean.queryData}" >
                         <h:column>
                              <a4j:outputPanel style="width:100px;border:1px solid gray;padding:2px" layout="block">
                                   <rich:dragSupport dragIndicator=":indicator"
                                        dragType="Query" dragValue="#{query}">
                                        <rich:dndParam name="label" value="#{query.name}" />
                                   </rich:dragSupport>
                                   <h:commandLink value="#{query.name}"
                                   action="#{workSpaceBean.populateQuery}">
                                   </h:commandLink>
                              </a4j:outputPanel>
                         </h:column>
                    </h:dataTable>
                    <f:verbatim></div> </f:verbatim>
               </rich:panel>
Now when I click on the button in my home page , and expect to be navigated to the page which has dran drop support components, I get the following error :
Error Message: Duplicate component ID 'myfolder:querytable:_id34' found in view.
Error Code: 500
Target Servlet: Faces Servlet
Error Stack:
java.lang.IllegalStateException: Duplicate component ID 'myfolder:querytable:_id34' found in view.
at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:171)
at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:179)
at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:179)
at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:179)
at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:179)
at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:179)
at com.sun.faces.application.StateManagerImpl.saveSerializedView(StateManagerImpl.java:86)
at org.ajax4jsf.framework.ajax.AjaxStateManager.saveSerializedView(AjaxStateManager.java:90)
at com.sun.faces.taglib.jsf_core.ViewTag.doAfterBody(ViewTag.java:170)
Iam getting this error only when I include this jsp in the parent jsp :
<f:subview id="menu">
          <jsp:include page="/search/incld/menu.incl.jsp" />
</f:subview>
Iam including the same way in all other jsps of my application , they are all working fine expect for this jsp which has ajax components (rich faces drag m drop support components ) .
From the error I deduce that the view component is being generated twice , why is this so???
I would appreciate if some one coulkd guide me through this .... I hope I was able to explain my issu properly , please let me know if it is now clear

I've tinkered a bit with DnD before in the past. Actually, it's all related to the topic of Data Transfer. You have to provide a source and destination for the transferrable, and your transferrable object must provide the "data flavors" that it supports.
In theory it doesn't sound too hard, and it works reasonably well within a java application, but to be honest your time might be better spent simply implementing cut n' paste, which is easier. Cut n' paste doesn't require all the fancy UI work, but does the job reasonably well.
There's a DnD spec available on the documentation web-site, if you haven't already found it. I also discovered that the O'Reilly book (I think it's the AWT book, not the swing one) has a good chapter on data transfer that you might want to read.

Can't drag and drop actions into a set

I'm using CS4 and haven't had this problem before. After loading various actions, I am unable to drag and drop them into one of my sets. The actions either drop above or below the set.
I'd appreciate any suggestions.
Thanks,
Carole

I can't think of any reason for this behaviour.
Maybe it's time to try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults. (A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

I used to drag and drop photos into pages. Recently updated to iPhoto 9.4.3 and now Pages doesn't recognize the photo?????

I use iWork Pages '09 to create my images. I normally drag and drop photos from iPhoto directly to Pages.
With iPhoto 9.4.3 I now get an error: " The media can't be used because you don't have access privileges or because it has no content or is corrupt". This doesn't happen with every photo from the same event and doesn't get corrected after running 'Repar Permissions'. I can Export to desktop then drag to Pages but that is stupid. What's up???

With iPhoto 9.4.3 I now get an error: " The media can't be used because you don't have access privileges or because it has no content or is corrupt".
This looks like previews of some of your photos are missing or corrupted. Did you run a cleaning application, like "clean my mac" or move your iPhoto Library? Where do you store your iPhoto Library?
I'd try to repair the database or rebuild the iPhoto Library in addition to repairing permissions with the iPhoto Library First Aid Tools. Launch iPhoto with the command and options-key ⌥⌘ held down at the same time to get to the First Aid Tools.
Back up the iPhoto Library before you try rebuilding.
Regards
Léonie

Mouse - Drag and drop not working

The Drag and drop feature is not working with my mouse. The mouse was tested and is fine. It's a software thing. It works with everything else, but if I try to select something and drag it, it doesn't work. Any advice?

PaulyK,
Believe it or not it may take multiple or several restarts....not just a couple. I have seen where it took 5 or 6. I have also seen where this did not clear the problem.
re: "Any other upgrades that might help with out having to buy new software"
The 10.2.8 update to Jaguar was the last before the "upgrade" to 10.3 Panther which is a paid upgrade.
There is a third party utility Dragster that may correct this problem or you can delete the associated files that it deletes manually. The files are:
com.apple.desktop.plist
com.apple.dock.plist (your choice to delete this or not)
com.apple.finder.plist
com.apple.LaunchServices.LocalCache.csstore
com.apple.LaunchServices. plist
com.apple.LauchServices. UserCache.csstore
LSApplications
LSClaimedTypes
LSSchemes
The contents of the /Library/Caches/ folder
You should have no problem with this utility or deleting the files manually if you go that route but I cannot vouch for it as it is third party....Use at your own risk!
edit: I just noticed that the link is no longer working for Dragster and the software now is part of a retired collection of apps from ifthen software.
If after multiple restarts and/or using Dragster or manually deleting the associated problem files you have no luck you might want to try applying the 10.2.8 Combo Update again to see if this will clear up the problem. Remember to repair permissions from Disk Utility before and after the update.
The Combo Update can be found here.
Post back if still no luck,
littleshoulders [:-)
Message was edited by: littleshoulders

Drag and Drop Action

Hi,
I have create a drag and drop slide, i wish to have difference "Interaction" so that my A B C will have it own right and wrong image.
i have try to insert the Action, example:i have create Action for A ,Show Image_17 when Success and show Image_25 when Failure, but when i wish to create another Action for B, it will automatic gave me the Action of A . If there have any solution? Thanks

You might need to do this as a two-step process. As Lieve points out, you can perform an action on drop of each object, but you also get the opportunity to perform another action when the entire interaction is submitted for evaluation.
So you could use the individual drop actions to set the value of user variables you set up to track which object is getting dropped, and then you could use the Submit action to SHOW or HIDE images based on the values of these user variables.
However, where things might run get tricky is setting up the Advanced Actions to register exactly which target received which drag object to determine whether it was a correct match or not and then execute an appropriate action. The Submit action usually only registers whether the overall interaction should be marked Success or Fail. It doesn't give you any real breakdown as to which drag objects were placed on which targets. You would need to call up the Accepted Drag Sources dialog for a given Drop Target and specify an Action to perform if the Target accepts that particular object, e.g. to set the value of a tracking variable.
What I'm trying to say here is that this can get a little complex. So don't expect everything to fall into place immediately. You may need to fiddle around quite a bit to get it working exactly the way you want.

How to Create Table Using Column Drag and Drop Feature

Hi:
I am new to Oracle SQL dev Data Modeler tool and would like to know if there is a way to create a new table by re-using the existing columns or column groups. The idea is to maintain consistency and save table design time. If columns created previously can be re-used and require drag and drop of column in the right pane, then only new columns need to be manually created.
Any thoughts on this will be appreciated.
Thanks!

Hi Kent
I checked out the video and tried it in Oracle designer, it works and works great!
My other question is that I may have several set of columns that I may want to group depending on the table requirements. Can I have multiple templates and choose which one to apply to?
Also, how do I choose the table where the table template needs to be applied. As I may be interested in applying the table template to selected tables only.
Thanks
Edited by: user648132 on Feb 20, 2012 10:47 AM

I use to drag and drop an web address into a link toolbar, can't seem to figure out how to do this...?

I just upgraded to Windows 7 and with it I got the latest Firefox. There is nothing like learning 2 things at one time. On my old XP and 3.? all I have to do was drag and drop a web address into a link toolbar. Saving all my frequent visited or just sights I want quick access to, to a toolbar quick button. I have been playing with this for days and decided to try this Forum. I did find the Bookmark toolbar, but cant seem to figure out what is if for or if you can drop into it. When I right click it and Customize, it shows me add on buttons, but nothing to do with web addresses or alike...
Bottom line; I want to be able to drag and drop a web address into a toolbar for recall latter and be able to edit the address with a right click at a latter date in necessary...
Thanks, Mike

You can drag and drop the favicon also known as the [https://support.mozilla.com/en-US/kb/Site+Identity+Button site identity button], at the left hand edge of the location bar onto a toolbar to bookmark the site.

Can you Cancel "acceptDragDrop()" using Manual Drag-and-Drop?

I have an AdvancedDataGrid (ADG) with manually drag-and-drop
functionality built in. The user can only drag-and-drop within the
one ADG. I do this in order to validate which items can be dragged,
and where they can be dropped. I have run into one problem,
however. In my override of dragEnterHandler(), I call
DragManaged.acceptDragDrop() if the user drags an item over a valid
item. However, if they don't drop the item there, and continue to
drag the item around the ADG, and roll over an item that is not
valid, there's no way to cancel the drop.
Does anyone have any suggestions?

Thanks for the updates.
"ericbelair" <[email protected]> wrote in
message
news:gealv1$dfk$[email protected]..
> FYI, AdvancedDataGrid property "dropEnabled" must be set
to "true" for
> this to work.

How do I edit a drag and drop action in CP8?

Once the drag-and-drop interaction is created, I cannot open the wizard again. In CP7, it was possible to edit the answers in properties. How do I do it in CP8?

In cp 8 also you can edit the interaction. This you can do the same way as you were doing in Cp7. but you need to have a look in the rearrangement of properties into sections in drag and drop panel in CP8.
I believe you are configuring the DnD interaction through launching the Wizard. After you configure the interaction open "Drag and Drop" panel from the "Window" Menu. Now In the Panel you can see the options to edit the interaction.
For changing the answer matching you need to open "Correct answers" window(which you were finding in DnD properties panel in Cp7)in cp8 you can find this option from the same panel under "Options" Tab section.(as shown in snap shot)
let me know if this resolves your issue.
devraj

I am used to "drag and drop" content from my computer to my old i-pod. With the new i-tunes, I can't seem to do that. Any suggestions?

I am used to "drap and drop" content from my computer to my old i-pod. With the new i-tunes, I can't seem able to do that. Any suggestions? Thanks.

diana42 wrote:
My problem is that Itunes does not acknowledge inserted CD in DEVICES area,
Are these Audio CDs?
Only Audio CDs will show up in iTunes.
This is new to me because I am used to importing and making copies from my playlists.
I don't follow. Would you explain this a bit more?

Drag and Drop actions

Hi,
I have used <af:collectionDragSource actions="COPY"
dragDropEndListener="#{pageFlowScope.reAssign.DragSource}"
modelName="emp"/>
<af:collectionDropTarget actions="COPY"
dropListener="#{pageFlowScope.reAssign.onTreeDrop}"
modelName="emp"/>
in my requirment.
there are three action like 1) copy 2) move 3) link
what does means that actions i.e copy move and link ? please exlain briefly.
Regards,
Kiran.

Check this
http://books.google.com/books?id=wlXyDIEyIHEC&pg=PA438&lpg=PA438&dq=af:collectionDropTarget+copy+move+and+link&source=bl&ots=j9TkiwDg44&sig=-H_D7I970cA1JYhQQLpGam-O3Qs&hl=en&ei=NXXvTZ_fHMrdgQeKz_yUDw&sa=X&oi=book_result&ct=result&resnum=4&sqi=2&ved=0CCkQ6AEwAw#v=onepage&q=af%3AcollectionDropTarget%20copy%20move%20and%20link&f=false
in Oracle Fusion Developer's guide book.
Thanks,
Navaneeth

How do i drag indicator control type on WPF instead of using Drag and Drop points

In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs
in many other screens.
Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points.

Hi Pavithra,
>> As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs in many other screens.
To really understanding this issue, could you share us what you mean by ”which is not correct”? It would be much helpful if you could share us a screen shoot about your UI and your issue.
>> Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points
Do you mean that the control of the WPF is invisible and you want to set the window display size to make it visible? If so, I think you could use the Mouse.MoveScrollWheel Method to change the windows view until the control is visible. The link below might
be useful to you:
# CodedUI cann't find the controls outside the screen view, Mouse.MoveScrollWheel doesn't work too
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e1dba9ee-dc51-4160-9a1a-a2220c903db0/codedui-cannt-find-the-controls-outside-the-screen-view-mousemovescrollwheel-doesnt-work-too?forum=vstest
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Move components using mouse - drag and drop action?

Similar Messages

Maybe you are looking for