Drag and Drop Action
Hi,
I have create a drag and drop slide, i wish to have difference "Interaction" so that my A B C will have it own right and wrong image.
i have try to insert the Action, example:i have create Action for A ,Show Image_17 when Success and show Image_25 when Failure, but when i wish to create another Action for B, it will automatic gave me the Action of A . If there have any solution? Thanks
You might need to do this as a two-step process. As Lieve points out, you can perform an action on drop of each object, but you also get the opportunity to perform another action when the entire interaction is submitted for evaluation.
So you could use the individual drop actions to set the value of user variables you set up to track which object is getting dropped, and then you could use the Submit action to SHOW or HIDE images based on the values of these user variables.
However, where things might run get tricky is setting up the Advanced Actions to register exactly which target received which drag object to determine whether it was a correct match or not and then execute an appropriate action. The Submit action usually only registers whether the overall interaction should be marked Success or Fail. It doesn't give you any real breakdown as to which drag objects were placed on which targets. You would need to call up the Accepted Drag Sources dialog for a given Drop Target and specify an Action to perform if the Target accepts that particular object, e.g. to set the value of a tracking variable.
What I'm trying to say here is that this can get a little complex. So don't expect everything to fall into place immediately. You may need to fiddle around quite a bit to get it working exactly the way you want.
Similar Messages
-
Move components using mouse - drag and drop action?
Hi,
As attached, I want to move one component at the bottom to top using mouse in drag and drop action.
But I don't know why it returns to the origianl position. it never move.
Is there anyway I can change configuration to accomplish this?Hi,
I tried this as you said, but it wont' work. -
Can't drag and drop actions into a set
I'm using CS4 and haven't had this problem before. After loading various actions, I am unable to drag and drop them into one of my sets. The actions either drop above or below the set.
I'd appreciate any suggestions.
Thanks,
CaroleI can't think of any reason for this behaviour.
Maybe it's time to try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults. (A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.) -
How do I edit a drag and drop action in CP8?
Once the drag-and-drop interaction is created, I cannot open the wizard again. In CP7, it was possible to edit the answers in properties. How do I do it in CP8?
In cp 8 also you can edit the interaction. This you can do the same way as you were doing in Cp7. but you need to have a look in the rearrangement of properties into sections in drag and drop panel in CP8.
I believe you are configuring the DnD interaction through launching the Wizard. After you configure the interaction open "Drag and Drop" panel from the "Window" Menu. Now In the Panel you can see the options to edit the interaction.
For changing the answer matching you need to open "Correct answers" window(which you were finding in DnD properties panel in Cp7)in cp8 you can find this option from the same panel under "Options" Tab section.(as shown in snap shot)
let me know if this resolves your issue.
devraj -
Hi,
I have used <af:collectionDragSource actions="COPY"
dragDropEndListener="#{pageFlowScope.reAssign.DragSource}"
modelName="emp"/>
<af:collectionDropTarget actions="COPY"
dropListener="#{pageFlowScope.reAssign.onTreeDrop}"
modelName="emp"/>
in my requirment.
there are three action like 1) copy 2) move 3) link
what does means that actions i.e copy move and link ? please exlain briefly.
Regards,
Kiran.Check this
http://books.google.com/books?id=wlXyDIEyIHEC&pg=PA438&lpg=PA438&dq=af:collectionDropTarget+copy+move+and+link&source=bl&ots=j9TkiwDg44&sig=-H_D7I970cA1JYhQQLpGam-O3Qs&hl=en&ei=NXXvTZ_fHMrdgQeKz_yUDw&sa=X&oi=book_result&ct=result&resnum=4&sqi=2&ved=0CCkQ6AEwAw#v=onepage&q=af%3AcollectionDropTarget%20copy%20move%20and%20link&f=false
in Oracle Fusion Developer's guide book.
Thanks,
Navaneeth -
How do i drag indicator control type on WPF instead of using Drag and Drop points
In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs
in many other screens.
Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points.Hi Pavithra,
>> As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs in many other screens.
To really understanding this issue, could you share us what you mean by ”which is not correct”? It would be much helpful if you could share us a screen shoot about your UI and your issue.
>> Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points
Do you mean that the control of the WPF is invisible and you want to set the window display size to make it visible? If so, I think you could use the Mouse.MoveScrollWheel Method to change the windows view until the control is visible. The link below might
be useful to you:
# CodedUI cann't find the controls outside the screen view, Mouse.MoveScrollWheel doesn't work too
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e1dba9ee-dc51-4160-9a1a-a2220c903db0/codedui-cannt-find-the-controls-outside-the-screen-view-mousemovescrollwheel-doesnt-work-too?forum=vstest
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Drag and Drop in Training Simulation
Hi everyone. Newbie here.
I am creating a software training module. One of my exercises
requires my users to re-order some columns by dragging and
dropping. If I record in training simulation, is there a way to
capture drag and drop? Or do I just need to create a click zone on
the column header and then jump to the next slide where the column
is in its correct location?Capture of a drag and drop action should be automatic if all
defaults are left. There is a feature called "full-motion"
recording that is automatically invoked whenever a
left-click-and-hold action is detected by Captivate - during the
Recording function.
Note the "full-motion" I am referring to is NOT the same as
using the "Full Motion" recording
mode. If there is confusion about this, let us know and
someone hereabouts will give you a detailed explanation.
~golfliness is close to Godliness
Larry -
Help with this ... using drag and drop
Hi guys,
I'm an intermediate user of Flash, but I'm stuck ... I'm
trying to see if I can recreate this page in Flash for a friend
(it's an awful site!):
Mannequin
There are two ways I thought I could do this ... as they've
done it, you cycle through the items, click on an item and it will
appear in a hierarchy on the mannequin ... or as I've tried to
attempt it, by dragging the item onto the mannequin.
This is EXTREMELY rough as I just wanted to see if it could
be done before designing it all, so it's stick men I'm afraid! I've
got two movieclips on the stage, one is the console and one is the
mannequin. The console contains items of clothing which are each
movieclips placed in their own frame, back and forward buttons and
an add button (ignore that button).
I've managed to set it up so that the item of clothing
duplicates and you can drag it onto the mannequin. I have two
problems ... the mannequin goes back to normal when I go through
the items in the console and the items in the console appear on top
of each other as you flick through (probably because of the
duplicatemovie command).
I want to be able to drag each item, establish a hierarchy on
the mannequin (e.g. so a jacket will go over a top) ... I've
searched this forum for drag and drop info and have seen references
to specifying a target, but I'm stuck. I've got a feeling I'm on
the right lines, but I've either laid it out wrong on the stage or
I'm missing a vital piece of actionscript ... Please can anyone
advise??? Thanks
Test Mannequin
Flash FileHi,
It would help if you could give some more details:
- what are you trying to do (drag and drop a whole component, drag an item within a tree, or a table, drag an item from one component to another?)
- have you found the modules you need in the unbound modules?
- have you read the documentation about the drag and drop actions? can you say which parts you're having problems with? The documentation is here. You'll have to select the component you are interested in and locate the action "drag" and the action "drop" to read about the parameters required.
Best regards,
Alex -
Swaping key figures in Web Report(Drag and drop)
Hi,
Assume that I have following three key figures displaing in the following sequence in web report:
Actual, Target, Estimate:
Now I want to put the key figures in the following order:Estimate,Actual,Target
When I do try to do the Drag and Drop in the web report I'm getting the following message and I'm unable to move Estimate to the first column,
Message: Drag and drop action was invalid and was not executed
I can able to drag and drop in the Bex Analyzer but in web reporting its not working
Please help
ThanksHi,
You can achieve this swapping of KFs by swapping them in BEx. In WAD, you just use the BEx query in which you do this swapping.
Regards,
Yogesh. -
What is the policy for drag-and-drop in training mode?
Hi,
I've captured an application in training mode. It contains one drag-and-drop action which obviously is done in full motion recording.
Only thing is, this doesnt work when you then do the simulation as a user.
Can drag-and-drop working in this mode? It seems not.
Can anyone advise?
Thanks,
JoanHi there
I'm guessing that you mean to ask if one is able to force a user to perform a drag-and-drop as part of a simulation?
Unless you program it in Flash or some other application it isn't avaiable. Check the link below for more.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Drag and Drop not working with windows 8.1
we using windows 8.1 for a few days now
so we installed visual basic .net 2012 and starting our projects again we used in windows 7
but now it seems that the drag and drop doesn't work in windows 8.1
we only gets a forbidden icon when we drag it over the control
please can someone tell us why windows 8.1 won't work with drag and drop
we hope this can be fix in anyway because we don't like when our users use our programs
and tell us that this point wont work in windows 8.1
our code:
Private Sub FlowLayoutPanel1_DragDrop(sender As Object, e As DragEventArgs) Handles FlowLayoutPanel1.DragDrop
If (e.Data.GetDataPresent(DataFormats.FileDrop)) Then
e.Data.GetData(DataFormats.FileDrop)
End If
End Sub
Private Sub FlowLayoutPanel1_DragEnter(sender As Object, e As DragEventArgs) Handles FlowLayoutPanel1.DragEnter
Try
If (e.Data.GetDataPresent(DataFormats.FileDrop)) Then
e.Effect = DragDropEffects.Copy
Else
e.Effect = DragDropEffects.None
End If
Catch ex As Exception
Exit Sub
End Try
End Sub
Thank you.
Dummy
p.s
we also got help from social msdn
here the topic who all answered.
social
mdsnHi,
Welcome posting in TechNet forum.
Do you mean the drag and drop action of files within different application?
We may take a try to disable the UAC settings and see if the drag and drop would work. And please note if we have UAC disabled, Windows Store APPs would be expected not going to work.
For the coding edit stuff, I suggest we keep focus on the MSDN thread.
Best regards
Michael Shao
TechNet Community Support -
I am looking for a solution and came across this unanswered question:
"For the drag and drop actions in Captivate 8, is there a way to indicate wrong answers on submit? Or, is there a way to only reset incorrect answers on reset? (I know this wasn't an available option on earlier versions.) I am trying to indicate when one drag source to drag target connection was incorrectly made by using a smart shape to highlight the drop target. I am unsure of how to create an advanced action to make this display only when the answer is incorrect, (as well as for other incorrect targets). Any suggestions would be greatly appreciated."
Any insight on this? I work with wounded veterans, many of them with TBIs, and would like to include this in the activities I am creating.
Thank you!You need to use the object actions, which are triggered when a drag source is dropped on a target. Those actions can populate user variables, perhaps Booleans (only value 0 or 1 possible): set the variable to 0 if wrong drop action, set it to 1 for correct action. Then you'll have to create a conditional action to be fired by the Submit button. That action should check the value of each variable and show previously hidden checkmarks or highlights for the incorrect answers.
There is no way to only reset incorrect answers. -
Drag and drop mapping UI element/functionality
Hi All,
we are searching for functionality, in which the UI should contain drag and drop mapping options.
e.g.
we have ztableA(cities) containing values:
NewYork
London
Tokyo
Moscow
we have ztableB(countries) containing values:
Russia
UnitedStates
Germany
England
the UI should contain above two table values vertically (cities on left side, countries on right), and the user should be able to map by dragging and dropping the cities with appropriate countries.
initially, the screen will look like:
NewYork Russia
London UnitedStates
Tokyo Germany
Moscow England
after drag and drop actions by the user, it will look like:
NewYork UnitedStates
London England
Tokyo
Moscow Russia
Germany
after the mapping is saved by the user, i can save the paired values in 3rd ztable.
for this UI, how can we achive, are what is the preferred way to get this, using webdynpro abap or fpm or any other?.
which UI elements we can use. We are on SAP ECC6, EHP7
thanks in advance.
Madhu_1980Hi,
You can use Table UI with drag and Drop. create an Event handler for onDrop and read the drag source and drop target then you can append those to new table.
Drag and Drop - Web Dynpro for ABAP - SAP Library
Hope this helps u,
Regards,
Kiran -
File drag and drop with Labview 7 and Mac OS X Tiger?
Hi folks,
I've lost the ability to drag and drop files into front panel file path
controls, since I upgraded to a new OS X version. Specifically:
What used to work:
- Labview 7.0
- Mac OS X 10.3.x
- drag file icon from desktop and drop onto file path control (file path control shows path to dropped file)
New action taken:
- lost old Mac (Titanium) with OS X 10.3.x
- bought new Mac (Aluminum) with OS X 10.4
- installed OS X 10.4 "over" 10.3 disk (did not build from scratch)
What happens now (three days after birth of new system):
- all my past Labview apps still seem to run
- but, if I drag a file from the desktop and drop it onto the file path control I see:
- file path control
"outlines" indicating that it understands the intended drag and drop
action
- when the file is dropped the file path control does not report the new value
- And the file path control still has it's old value
Anyone else seeing this? Am I missing something obvious (Labview or OS X preferences)?
Thanks in advance,
RMPHello,
I don't know how seriously Apple sees the problem, but it doesn't seem plausible that they would rev the OS on account of just this problem with LabVIEW, particularly since we worked around it for the latest version of LabVIEW. I understand you are working with another engineer at NI via direct email regarding this issue, and that is going to be a better forum for discussing the possibility of obtaining the Apple bug report number. In the event R&D is willing to reveal it, I presume they will be more comfortable doing so on a case by case basis, as opposed to posting it on the external discussion forum.
Thank you, and sorry for the inconvenience you have encountered due to this issue.
Best Regards,
JLS
Best,
JLS
Sixclear -
Help Converting AS2 to AS3 Drag and Drop Event
Hi All,
This is the second post on help for converting AS2 to AS3. This code is used in Captivate to allow a drag and drop action between two areas (User presses down, drags, and releases in a second area - They are not dragging any object). If anyone can help me convert this please let me know.
Source for Drag and Drop: (Note: Single MovieClip)
// pause the Captivate movie
_root.rdcmndPause = 1;
// when the user's mouse is let go check if there was a successful drop
_root.onMouseUp = function(){
// If the source area's center coordinate is nearby the destination area's center coordinate then advance the slide
if ( Math.abs(_root.sourceX + _root.sourceWidth / 2 + _root.sourceParentX - (_root.destX + _root.destWidth / 2)) < (_root.destWidth / 2) &&
Math.abs(_root.sourceY + _root.sourceHeight / 2 + _root.sourceParentY - (_root.destY + _root.destHeight / 2)) < (_root.destHeight / 2) )
_root.rdcmndNextSlide = 1;
} else {
// show error movie clip for 2 seconds (60 frames at 30 frames per second)
_root.showErrorMessage = 60;
mc.onEnterFrame = function(){
// continuously update the source area's coordinates and size
_root.sourceX = mc._x;
_root.sourceY = mc._y;
_root.sourceWidth = mc._width;
_root.sourceHeight = mc._height;
_root.sourceParentX = _parent._x;
_root.sourceParentY = _parent._y;
mc.onPress = function(){
// Uncomment following line to have control click capabilities
//if(key.isDown(Key.CONTROL))
// when user clicks on the source area click start the drag
startDrag(this);
mc.onRelease = function(){
// stop drag when user releases the source area
stopDrag();
Source for Destination Area (Single MovieClip named destArea)
// Set a root variable to control when the error message is displayed
_root.showErrorMessage = -1;
// Use setCoords variable so we only set the destination coordinates once
var setCoords = 0;
destArea.onEnterFrame = function(){
if (setCoords == 0){
// set the destination x, y, width, and height
_root.destX = _parent._x;
_root.destY = _parent._y;
_root.destWidth = _parent._width;
_root.destHeight = _parent._height;
// destination coordinates have been set, change setCoords so it doesn't get set again
setCoords = 1;
Code for the Error Message (Single MovieClip named errorMessage)
// Don't display the error message initially
errorMessage._alpha = 0;
errorMessage.onEnterFrame = function (){
// If the drag and drop method detects a missed drop
// then show this error message by setting _alpha to 100
if (_root.showErrorMessage > 0){
errorMessage._alpha = 100;
// decrementing this variable controls the time the
// error message will be displayed
_root.showErrorMessage--;
} else {
// Don't display the error message
errorMessage._alpha = 0;use:
MovieClip(parent.parent.parent).rdcmndPause=1;
this.addEventListener(KeyboardEvent.KEY_DOWN,keydownF);
function keydownF(e:KeyboardEvent):void{
fscommand("KEYPRESSED", e.keyCode);
if(e.keyCode==32){
MovieClip(parent.parent.parent).rdcmndNextSlide=1;
Maybe you are looking for
-
I create the jar file as follows: java -cp D:\bea\wlserver6.1lib\weblogic.jar weblogic.ejbc -compiler javac D:\working\icechill\classes\ScipBeans.jar D:\bea\wlserver6.1\config\mydomain\applications\ScipBeans.jar After that I start my weblogic6.1 serv
-
I have lost the link to the backlight on my keyboard of my macbook
I have lost the backlight of my keyboard and when I go to the 'keyboard' in System Preferences, there is no link. Is it possible to lose this information by using a 'disk sweeper'?
-
It isn't at all rare that I cannot open an event to find details such as what time, where, etc. Usually when this happens, I go upstairs and check my wife's iCal which is synchronized with mine. A couple of days later, I can open that same event on m
-
I now see 10.7.5 in my software update...can I just use that one or do I have to download some combo update? I have been scared of kernal panics.
-
I don't have enough credits in my iTunes account, can I use my Credit Card but using my iTunes credit first?