Move  VBAP-PS_PSP_PNR number to DXVBAP in EXITS

HI Experts,
I have to use "EXIT'_SAPLVEDA_001" for FM " IDOC_INBOUND_ORDERS"
to enhance the inbound idoc , Here i need to pass the PS_PSP_PNR number from VBAP table to DXVBAP parameter which available in Exits " "EXIT'_SAPLVEDA_001". That PS_PSP_PNR number already  available in Inbound IDOC under E1EDP02 Segment but the DXVBAP parameter in Exit does not refer to any Associated type
In this case How can i move the PS_PSP_PNR number to that DXVBAP.
Thanks in Advance

INCLUDE LVEDACOM.
DATA: lt_xvbap LIKE STANDARD TABLE OF xvbap.
lt_xvbap[] = dxvbap[].
Then you should be able to access the PS_PSP_PNR field while processing the internal table lt_xvbap.
Or, another way would be:
INCLUDE LVEDACOM.
FIELD-SYMBOLS: <xvbap> LIKE xvbap.
LOOP AT dxvbap assigning <xvbap>.
  "here you have access to <xvbap>-PS_PSP_PNR.
ENDLOOP.

Similar Messages

  • Movement type wise number range

    Hi,
    We have created a 'Z' Movement type (copying 541 movememt type).
    Now, we want to assign a new number range to this 'Z' Movement type.
    How it can be done?
    Regards,

    Hi,
    As per SAP Standard, we assign no:ranges to document types only such as WE,WA etc in MM-Inventory management.
    Hence you have to create Z - No range object &  assign the same to your Z movement.
    check for available BADI's/User Exits to meet your requirement.
    Thanks & Regards,

  • How can I move a large number of pics from icloud Photos Beta to a PC without having to select each photo?

    How can I move a large number of pics from icloud Photos Beta to a PC without having to select each photo?

    Hi,
    can you please explain why the solution from steve is not the right solution for you.
    regards
    Peter

  • How to move my online number to a new Skype accoun...

    How to move my online number to a new Skype account?

    Are you sure the Online Number(s) are still active, if so you should be able to change your caller id settings here: https://secure.skype.com/account/caller-id/settings
    Note: Not knowing the country you are in, please see this as well: http://www.skype.com/intl/en/features/allfeatures/caller-identification
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • How to move a page number in front of an image

    how to move a page number in front of an image on pages??

    Hello albertlini,
    This can be done by chosing to move the image to the back via the Arrange tab.
    Move an object to the very top or bottom of the stack: Click Front, or click Back.
    Pages Help - Layer, group, and lock objects
    http://help.apple.com/pages/mac/5.5/#/tan5eab46568
    Cheers,
    Allen

  • Clarification needed in WBS element(VBAP-PS_PSP_PNR)

    Hi Experts,
    I am using VBAP-PS_PSP_PNR for printing WBS Element. but when i see the contents of that table, the value of the WBS Element was not equal to the value which i am printing in the form. I came to know that at domain level some conversion is going on, but i cant understand exactly. Can any one explain this indepth.
    Thanks & Regards,
    Ramana

    Hi Ramana,
                       This happens coz of the conversion routines attached to the domains of the field PS_PSP_PNR. There are two conversion routines present here.
    CONVERSION_EXIT_ABPSP_INPUT   
    CONVERSION_EXIT_ABPSP_OUTPUT  
    Try using them. You would get the desired output.
    Thanks
    Nayan

  • HT1349 I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

    I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

    Leigh...
    but cannot do this because I cannot access Mac App Store
    If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
    It's ok to do this even you are already running v10.6.8.
    Plants vs. Zombies, and that is all for additional software on here
    FYI:  Some third party software can cause issues with the App Store >   Mac App Store: Sign in sheet does not appear, or does not accept typed text
    Apple is not responsible for incompatibility isssues with third party software.

  • How can I move my telephone number from one Iphone to another

    How can I move my telephone numbers from one IPhone to a new one?

    if you are talking about your contacts.  backup your old iphone then do a restore to the new phone and that will transfer your contacts your settings and pics and music. 
    if you are talking about chaning your phone number from an old phone ot a new one that has a different number.  you have to contact your phone carrier.

  • Generic Batch Number assignment via Customer exit

    Hi Folks,
    The client  requirement is as follows:
    Once a user enters a batch number customer exit EXIT_SAPLV01Z_002 should be triggered.
    Here, in this exit via custom logic, i am supposed to create a generic batch code.
    If the user enters a batch code from any tcode be it MSC1N, Purchase order creation, MB11, Process order etc.
    First a validation should be done. Else, if field is blank then a generic batch number is to be created.
    Generic batch would be like PMFGYMDxxx- PMFG- Plant of manufacture, YMD- Date in YMD format and xxx as next.
    My concern is that when user enters a batch code from above mentioned TCODES this Customer exit does not get triggered.
    It only gets triggered when batch number field is left empty.
    Need help!!

    Moderator message - Welcome to SCN.
    But please do not post your requirements and ask the forum to do your work for you - post locked
    Also, Please read Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!! and Please Read before Posting in the Performance and Tuning Forum and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
    Rob

  • How can I move an online number from one Skype acc...

    I managed to get an online number but bought it for the wrong Skype account - is there any way I can get it transferred across to a different Skype account?

    It's not possible to transfer products from one account to another. But you can request a refund and purchase a new number for the correct account.
    https://support.skype.com/en-gb/faq/FA297/How-do-I-request-a-refund

  • Trackpad periodically doesn't register movement for a number of seconds.

    Every once in a while, probably once a day, my trackpad will stop registering movement for 5ish seconds. It can still click just fine, but it won't move. Usually it will start reading again for a second, then freeze up for another few, and on like that for half a minute until it goes back to normal.
    Has this happened to anyone before?

    I'm having the exact same problem with my MBP. So far I've run all AppleJack's options except for disk permissions and reset the PRAM without success.
    None of these symptoms show up when a mouse is plugged in, which is 90% of the time for me.
    Any input will be greatly appreciated. Thanks.

  • Define number of errors before exit compilation process

    Hi,
    I know that under HP Itanium there is a flag to define max number of errors before compiler ends with failure (aCC_MAXERR flag). Do we have in C++ studio same flag for enabling it under Sun Solaris environments?
    Appreciate your answer,
    Thank you
    Moshe

    Beginning with Sun Studio 12 udpate 1, we have an undocumented "Qoption" to allow you to set the maximum number of errors:
    CC -Qoption ccfe -max_errs=+N+ ...
    where N is an integer.

  • Making a 'Movie' from large number of 'still images?'

    I have a 2011 15" MacBook Pro with Lion. I have QuickTime Player 10.1.
    I want to make a 'movie' showing our new company product rotating on its axis. The raw material would be still images, each taken from a slightly different angle. I thought QuickTime Pro would be the tool for this, but apparently it no longer exists? Can I accomplish the same thing in iMovie?
    Suggestions most welcome.
    Thank you!
    Chris in New Hampshire

    Thank you, AppleMan! I just wanted to make sure that I'm OK buying this because the App Store tells me this as a warning:
    Please note: Your QuickTime 7 Pro registration code only works with QuickTime 7. Be sure you have downloaded and installed QuickTime 7 Player before you enter your QuickTime 7 Pro registration code.
    So, since I have QuickTime Player 10.1 I wanted to confirm that this isn't a roadblock.

  • Goods movement 101 & serial number

    Is there a report in SAP that identifies goods receipted into stock using 101, and where used shows serial numbers entered?
    If not please identify suitable tables which I can join for a SQO1 SAP query.
    Regards

    Hi,
    Using Tcode MMBE which shows you stock of material in all stock types (Unrestricted stock, quality inspection stock, blocked stock, Gr Blocked stock) It gives you all the details regarding the stock in hand for individaul stock types and also onordered quantity details . Also you can see in document tree of MIGO the materialdocuments generated due to good reciept.
    With movement type 101 you can analyse the stock types viz blocked stock, quality inspection and unrestricted, which can be seen at various organisational level from compay code, plants to storage location level.
    Regards,
    Tushar Patankar

  • Move subscription / phone number to a different ac...

    Hi,
    I have 2 skype numbers connected to my account. This is not optimal because I want to forward both numbers to different mobiles and that is not possible. So I want to switch one number to a new skype account which will result in 2 different account, each connected with one skype number.
    But I cannot figure out how to get this done. I could cancel one subscription and claim it with the other account. But I am not sure it the number is available right away.
    Anyone got an idea?
    Thanks.
    Solved!
    Go to Solution.

    Hi, PvdB, and welcome to the Community,
    You are on the right track: because Skype does not permit the transfer of any calling feature, subscription, or credit from one account to another, our only recourse is to cancel one Skype Number subscription and start a new subscription on a new account, thereby achieving the goal of being able to transfer two Skype Numbers to two different mobile phone numbers.
    What you would have to do - with no guarantee of success - would be to cancel one of the Skype Number subscriptions (which would still be usable until the end of the subscription term), then wait the 90 days while the number is held in reserve on your account to reactivate it, and then hope you can "grab" the number when it is released back into the available pool of numbers from which to choose.
    In keeping things simple, there is no flexibility with changing plans or subscriptions.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Maybe you are looking for

  • How to find out if two JComponents overlap?

    I wanted to create very simple game, another version of arcanoid (or krakout) where player tries to hit bouncing ball with paddle so the ball will break the wall made of small bricks. so far came up with an idea that paddle will be JComponent control

  • Shared photo streams in iPhoto and Apple TV

    Why is this proving so difficult for Apple to get right? All I want to do is create private albums that I can share with family and have them sync back to my Mac so that all I need to do is organise my photos ONCE (i.e. on iPhone or iPad) and see the

  • Site doesn't load properly

    Guys, what's going on with the site? I'm simply unable to browse it, works don't show up, no matter which browser I use on my PC or on my tablet. It looks awful, just like the attached image. Edit: Btw, this happens on both "regular" em "pro site" ve

  • Wifi, wifi

    Hello, i have a problem with my wifi on Iphone 4s, it's always turn off....?

  • ODI and XML - how can I get this to work?

    Hi all. I'm working on a new dwh solution where the main source of data will come from XML-files. The problem is that we are having difficulties with the use of abstract types in the xsd-file. We currently use ODI to read the XML-files and to store t