Moved files between project, lost thumbnails, cannot see images anymore

Hi,
I moved 1902 images from one Project to another, but that didn't work very successful.
I have now all the 1902 still in the original Prject but I see no thumbnails and selecting it says that it cannot show the image (red background).
I can neither see them in the new project, well some ~5% I can see, but the rest are just grey icons. If I try to edit one, it shows nothing.
Is there a way to sort of "check" the library and rebuild the thumbnails?

I am running 1.1.2 but have not yet upgraded to 10.4.7
I cannot export those pictures, because they now completly disappeared after I started Aperture with cmd/opt.
When I looked into the aperture library the missing pictures had the CR2 file missing in the folder. So I doubt I would have been able to actually export the original file.

Similar Messages

LR5 stopped moving files between folders

Hi everybody,
I've noticed today that my LR5 stopped moving files between folders, I select files I want to move and drag them over to a new location like I always did before with only difference is now nothing happends, no messages with errors, nothing... I tried to google it and couldn't find anything related to my problem.
I'm using Windows 8 x64. I checked the permissions on all the photo folders and everything seems to be correct. I also run LR under admin rights, so there shouldn't be any OS related issues... in addition, it was working just fine till today.
I hope you can at least point me in right direction to dig more info on the problem with my LR5.
Thx!

Hi everybody,
I've noticed today that my LR5 stopped moving files between folders, I select files I want to move and drag them over to a new location like I always did before with only difference is now nothing happends, no messages with errors, nothing... I tried to google it and couldn't find anything related to my problem.
I'm using Windows 8 x64. I checked the permissions on all the photo folders and everything seems to be correct. I also run LR under admin rights, so there shouldn't be any OS related issues... in addition, it was working just fine till today.
I hope you can at least point me in right direction to dig more info on the problem with my LR5.
Thx!

Moving files between folders is very slow

Hi, I have an iMac 2011. Processor: 2.7GHz Intel Core i5/ Memory 4GB
OS X Yosemite, version 10.10.1
After I change my OS from Mavericks to Yosemite, moving files between folders is very slow.
For example, if I move one jpg file in Desktop to Pictures folder (or just any other folders like Trash), it takes about 3 seconds.
When I was still using Mavericks, it made that Ding sound and transferred files right away. However, now, although it makes the Ding sound right away, the file is still there for 3 seconds.
I tried to clean up my mac using many apps, but they never fixed this problem.
I've also tried what I saw on this one thread. OS X File Transfers Very Slow
Go->Connect to Server then type "cifs://server-address" but it says there is a problem and did nothing. (maybe different issue)
Please help!

There may be other issues, but you installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

Moving Files Between Unix - OS Commands

Hello All,
We have a Z object which download the output to an Unix directory, the out put file is loo large and when trying to access the Unix file from ABAP code to local harddrive, its erroring out that the maximum time set has passed.
Is there a way to access the UNIX files using the OS level commands as defined in the article posted "ABAP/4 Code Sample: Moving Files Between Unix" in SDN Network. I tried out the FM described, which did not exist on 4.5, 4.7 Ver. So any FM that can help me in performing this task.
Regards,
- Sravan

Hi Sravan,
compress your data with follow. command
(look F1 to open too !)
OPEN DATASET file FOR OUTPUT IN TEXT MODE FILTER 'compress'.
regards Andreas

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

Azure Storage Blob error - AnonymousClientOtherError and AnonymousNetworkError (why cannot see images)

I have an mobile app and I put images in Azure Storage Blob. when tested by several of our own people (on test and beta), it is all good.
But when we released it to beta and had hundreds (maybe above one thousand) of users to use, lots of them report that they cannot see images. It happens on their iPhones and also on many different brands of Android phones. Sometimes, for the same image,
on one phone it is good, but on another it doesn't show.
When I check blob log, I saw a lot of errors, mainly these two:
AnonymousClientOtherError; 304
"Anonymous request that failed as expected, most commonly a request that failed a specified precondition. The total number of anonymous requests that failed precondition checks (like If- Modified etc.) for GET requests. Examples: Conditional GET requests
that fail the check." (From Microsoft)
AnonymousNetworkError; 200
"The most common cause of this error is a client disconnecting before a timeout expires in the storage service. You should investigate the code in your client to understand why and when the client disconnects from the storage service. You can also use
Wireshark, Microsoft Message Analyzer, or Tcping to investigate network connectivity issues from the client. " (From Microsoft) - a question here, this is an error, but why it is 200?
I wonder if these are the reasons that caused my problem?
For the first one, from my understanding, it is not actually an error, it just says that the version client cached is the same as server version. But when my client side sees this response, it thinks it is an error and throw an exception and thus no image
is shown? (I actually outsourced my client side, so I can only guess). I later tested with my browser to access these images and found that if I refresh the browser with the same URL of the image, I saw error 304 on the log but I still see the image. So I
guess this is not actually a reason for my problem.
For the second one, is it because my client side's timeout is shorter than the server side's timeout? But is the timeout a connection timeout or a socket timeout? what are the default values on client side and on Azure Blob? Or is it because the network
is not good? My Azure server is located in East Asia (Hongkong), but my users are in mainland China. I wonder if that could cause problem? But when a few users tested in China it is all good.
Many of the images are actually very small, just one to two hundred k. Some are just 11k.
I cannot figure out what is the reason...

Hi,
Does any people encounter this error when they access the small picture, if this issue is only caused by large picture, please try to improve the timeout, you can also monitor your storage account from the Azure Management Portal, this may be help us
to find out the detailed error information. see more at:
http://azure.microsoft.com/en-gb/documentation/articles/storage-monitor-storage-account/, hope it helps.
Regards

When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image

When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image. I have uninstalled and reinstalled but same result. How can I get this reset to show selected image and crop handles?

That has fixed it, all working fine now, thanks.

Error when moving files between Sharepoint sites using 'content and structure' feature

Hi,
I am using Sharepoint Online 2013 on a mac computer.
I am trying to move files between sharepoint sites/libraries but because the "open with explorer" link does not work on mac computers, I need to do so using the 'content and structure' feature.
When I select a file to move and then select the destination site/doc library, i get the following error:
An error was encountered performing this operation.
Operation to Move '120207_Australia Post_Invoice.pdf' to '/Ops/internal/admin/General Admin' failed
No items were moved. Please remove 120207_Australia Post_Invoice.pdf from the selection and retry operation
Please help!
Thanks,
Kate

Hi Kate,
If you mean only one file "120207_Australia Post_Invoice.pdf" could not be moved, please compare this file to the other files moved successfully, check if there are some differences, like the content types, fields.
Also compare the source library and destination library, make sure they have the the same type of fields.
And you could have a try of moving this single file separately see if it could help, or as a workaround to download this file from source and upload to the destination library.
Since it is related to SharePoint Online 2013, we cannot see the ULS log for more information, I would suggest you post this issue in Office365 SharePoint online dedicated forum via the following link for a better assistance.
http://community.office365.com/en-us/forums/default.aspx
Thanks
Daniel Yang
TechNet Community Support

Project Server 2013 - Cannot see project schedule in PWA

Project Server 2013 and Project Pro 2013
I have admin authority but for some of the projects loaded to the server, and published, i cannot see the Schedule option in the left frame. At least on project has this option available but several others do not. For the projects where I can't see the schedules:
- Some of these projects were created with imported MPP files from Project 2010, and imported using the wizard,
- Some were created with imported XML files from Project 2010, and imported using the wizard
- Some were created with Project Pro 2013 and saved, published to the P13 server.
Are there some obvious things that I should check as a new admin to this version of Project Server? I'm stumped.
For all of the above projects (with the issue or not) I can succesfully see everything in Project Professional 2013, and everything seems to function normally in the publish process.

Hi,
the first thing to check would be the EPT (Enterprise Project Type) of those projects. Go to server settings, Enterprise Project Types, select the appropriate project type and ensure that the Schedule page is on the left side of the section "New Project
Page/Project Detail Pages".
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Moving files between storages

I move file between storages using mv command. After completed the new file was created but the space does not freed.
This not happen before. Can anybody help me.

usually the case where the file you are movng is open by another process, and cant complete the move. When the process that has the file open dies, or when you reboot, the operation should complete.
run a 'fuser' on the file you moved, and see whats got it open.

Project Lite user cannot see tasks assigned ...

Hi
I have assigned tasks to a user Project 2013 and linked the project to Project Online.
As the administrator, I see all my tasks in the Timesheet view in PWA but the users that use Project Lite canot view their tasks and cannot see them in their Timesheet.
I am quessing it is a permissions issue but cannot find where to set the right permissions.
Any solutions out there?
Thanks.

Hi,
Have you correctly published the assignment of the user from the project (either PWA or MS Project Pro)?
Is the user looking at the right period?
Is the publish job successful?
Is the booking type committed and not proposed?
Is the resource the assignment owner of the assignment?
Have you assigned an enterprise resource and not a local resource? When you go to the resource center, select the resource, can you see the assignment?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Project Lite users cannot see Project link on Office365 toolbar

Our Project Lite users do not see the PROJECT link in the Office365 toolbar.
All other roles can see the link - these have either Project Online subscription or Project Pro for Project Online subscription.
I have verified the following:
These users have Project Lite and SharePoint online licenses assigned in the Office365 portal - user license area
We are using Project Server permissions mode - with a custom Team Members group - that maps to the OOB Team Members group and My Task category permissions. There are no custom category permissions set on the Resource- only custom Team group
membership
We even shared the PWA site with the members (Team Members for Project Web App)
We are using ADSynch to synch users to the custom Team Members group via an O365 group.
We are using the default \PWA - it is the only instance of PWA in the Office365 environment (E3 subscription
These users can access the PWA by entering the URL in their browser - they just cannot see the Project link on the 0365 menu bar.
Note: The Office365 SharePoint online administrators have created a custom master page - but the PROJECT menu item is rendering for non-Project Lite licensees.
Any ideas on the cause or how to get Project Lite users to see the PROJECT link on the O365 toolbar?
LB

Hello,
Please can you confirm they are using the correct URL?
It should be along the lines of https://<Company_Name>.sharepoint.com/sites/pwa/
I ask you to check this as I have seen previously users not seeing the Project link when using a different URL.

I have photoshop CS5 extended on my PC; some days ago I had to substitute Windows 7 so I installed Windows 8. Since then my RAW files are not supported by CS5, I cannot see them anymore

PROBLEM WITH RAW FILES with WINDOWS 8.
I have photoshop CS5 extended on my PC; some days ago I had to substitute Windows 7 so I installed Windows 8. Since then my files RAW are not supported by CS5, I cannot see them anymore

Your answer has been very useful. I have made ACR update and now my RAW files are normally supported and visible.
Great !
Thank you very much ...

Os x 10.9 - Moving files between folders with Mavericks.

How do i drag and drop files between folders without creating a duplicate? Prior to the Maverick upgrade I could drag and drop without creating a duplicate. Earlier forums suggested Cmd-Opt-V would prevent duplicates, but this now creates an alias file.

By default the Job Accounting plugin is installed by the Kyocera installer. So you don't need to enable it, you just need to select the Job Accounting menu in the print dialog. To see this menu, in many Apple applications you must have the print dialog set to Show Details. Then you can change the menu to Job Accounting as shown below.

Cannot see images in Project

OK, I just finished up importing all my images that were stored on DVD's into separate projects in Aperture. Now I am working on the tedious task of going thru and keywording the images, ranking them, etc,,,
Anyway, in one of my projects (DVD02) none of the images appear. I know they were imported, (In finder, I can view the contents of the Library, and then the DVD02 folder) So why aren't they showing up in the browser?
Thanks in Advance!

You haven't by accident typed anything into the search field next to the Query HUD in the Browser? (if you don't know where it is, see page 296 in the user manual).
Regards
Paul K

Moved files between project, lost thumbnails, cannot see images anymore

Similar Messages

Maybe you are looking for