MOVED: K7D Master Video problem

This topic has been moved to Server/workstation.
K7D Master Video problem

Quote from: Liquidman.com on 13-December-05, 09:40:12
Well let's see, The k7D is a dual mobo and will work with only a limited number of cards, after trying a few I finally settled on an nvidia Direct X 9.something (there is no name on the card, and I have 6 video card box's) I put in a a Wildcat 5110 I had laying around, but the driver doesn't support Max 8, or even 7, can't use software/Heidi. You just see the desktop through the viewports. This mobo uses an AGP pro slot, I don't even know if anyone's makeing these anymore.
Are you running linux ? If so i suggest a Nvidia card.

Similar Messages

  • MOVED: K7D Master Sound Problems

    This topic has been moved to Server/workstation.
    K7D Master Sound Problems

    ...AC 97 is common hardware so it should be easy to find a driver...maybe here?..
    ...I'm not familiar with that OS, but have you done all the updates?..

  • K7D Master Rebooting problem

      I have two new systems I put together, with the K7D Master board, and two AMD MP 2000+ on each board. Video card Quadro 750 xgl, and 512m pc2700 ram. I have pulled everything else out and the problem persists.
      My problem after a fresh install of Win2k and both systmes runs great. I leave it on and during random intervals the systems will reboot it themselves. Both systems do the exact same thing, usually about once a day. They appear to run fine tempature wise, and both have the 1.6 bios update from MSI site. The doesnt appear to be any set time that it happens. Looking through the event log doesn't bring up anything useful, and I dont have anything loaded other than Win2k service pack 2, and all updated drivers, and security updates.
     Any help??

    Main Memory  
        - Supports eight memory banks using four184-pin DDR DIMM
    - Supports DDR SDRAM DIMM
    - Supports a maximum memory size of 4GB (registered DDR
       only)
    is it registered ram not normal
    http://www.memtest86.com if it is to check it
    http://www.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=73&MODEL=MS-6501

  • MOVED: MSI VR330 video problem

    This topic has been moved to C, S, and W Series.
    https://forum-en.msi.com/index.php?topic=250890.0

    What system are you trying to install and what drivers are you using?
    VR330 only supports Windows XP and Vista 32 bits.
    If the problem starts after you reflow the video chip of your graphics, then there may be some problem with the graphics.
    Make sure you're using the supported OS and the driver version, if the problem still remains, then I'd suggested you send the unit for a check at the service center.

  • TV@nywhere master. video problem

    hi. i got the tv@nywhere card for my wife for xmas & it was working fine until recently when all of a sudden when recording a clip from the dvd/vcr & she goes to add it to the project she's working on it opens only as a mpeg sound clip??? all was fine, now this. i tried the uninstall/reinstall deal, with no luck. i got the updated driver via an e-mail from intervideo and again, no luck. i know my system can handle it. any help would be greatly appreciated. thanks. take care all
    rick....
    amd athlon xp 1700+
    512mb sdram
    40gig HD
    radeon 9000 video

    Patience Yuz this forum has no input from MSI so you have to wait until someone, somewhere else in the world is awake.
    Regards to MSIPVS yes it is awful and there has been quite some discussion within this section of the forum and the survey section as to the problems with this software. It is not only MSIPVS that is at fault the drivers also need some work. On some PC`s MSIPVS causes crashes but by far the biggest complaint is the poor display. Also MSIPVS or the card/drivers not sure which, will not remember it`s locale, every time it is started it will go back to the default in my case it seams to be PAL_B and some times to NTSC my locale is the UK and the TV setting should be PAL_I but getting to stay on PAL_I is a big problem. It makes it hard to schedule a recording as it will probably start in the wrong format. I agrre with you that feeware software is better than MSIPVS.  
    Thanks to your previous post I can confirm that you have sorted the remote`s missing functions.
    Now all we need to get the drivers and MSIPVS sorted.

  • MOVED: K7D Master does not recognize 1GB Reg ECC modules

    This topic has been moved to Server/workstation.
    https://forum-en.msi.com/index.php?topic=96220.0

    How many modules are you talking about? If you try to use 4 of them, I can imagine it won't work.
    Also, are they trouble free?
    Try Memtest86 on each of the sticks.
    I see this on the MSI product page:
    Quote
    • Supports eight memory banks using four184-pin DDR DIMM
    • Supports DDR SDRAM DIMM
    • Supports a maximum memory size of 4GB (registered DDR only)
    Note: Because of limitations imposed by the personal computer architecture and BIOS, the user-accessible memory is less than 4 Gbytes even if 4 Gbytes of physical memory is installed.

  • K7D Master Sound Problems

    I have that board and installed win 2003 on it and downloaded the driver and it was fine then i added  the highpoint 1520 card with rocket heads reinstall windows and now when i try to install the sound drivers, it installs but in device manager it still has it as unidentified... please help as I am now thinking that win 2k3 was a bad choice for this akward setup but it is so fast that it would be perfect for my unreal tourny server.

    ...AC 97 is common hardware so it should be easy to find a driver...maybe here?..
    ...I'm not familiar with that OS, but have you done all the updates?..

  • MOVED: I have problems with my K7D MAster board

    This topic has been moved to Server/workstation.
    I have problems with my K7D MAster board

    Juansebastianco,
    you can try this, to see if it makes a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still crash after being on?

  • Problems to get run a 7800GS on my K7D Master -L - HELP -

    hi,
    i having problems to run my new 7800GS on my K7D Master -L
    during driver installation(in the middle of) on windows XP pro the system turns into black screen.
    My System:
    2 Athlon MP 2800+
    2x 512 MB Samsung
    Powersupply: +3.3V (38A), +5V (44A), +12V (20A) (enermax EG465P-VE)
    only one harddisk
    i removed all cards - no solution
    i try to run with only one CPU - no solution
    i´m really on fire with this problem
    has anybody any idea how to fix this ?
    i also loaded optimized bios config... clear cmos... i do anything but this card would not run
    and the card supports AGP 4x
    before i try the msi 7800GS same problem
    now i have the club 3D 7800GS ... same problem
    i dont think thats the pwoersupply... what did u think ? but it has enough power... or ?
    please help !   thanks
    and... bios is 1.91 (latest stable of course)
    ...and try 4 different forceware drivers
    thanks

    Cool but the temps here and probably where you live (I checked your IP, we live 80km's apart ) are way lower then the last couple of day's.
    So at lower temps, the PSU can deliver more power.
    I hope it will still work when the hot temps are comming back.

  • I have problems with my K7D MAster board

    I just have gotten hands on a new K7D master mobo (yeah i know it is not the newest board on the market but i had the cpus so why not). I have just installed Windows 2000 server on the machine. And everything was working fine until I was going to transfer some very large files over to my other computer (DVD isos 4,5 GB) and then the machine just locks up. And I have to reset it to get it up and running again.
    I have changed the network adapter and reinstalled the whole system, but it doesnt help.
    When i look under the device manager there is an unknown device called "unknown pci bridge" it seems its the AMD 768 chipset.
    But here comes the real problem, I cant instal any AMD drivers?? When i try to instal the EIDE driver, the 768 chipset driver or any of the AMD drivers its just saying that there is no AMD components found.... And the driver wont instal.
    Anyone heard of this before?
    MSI K7D Master
    2 X MP1900 CPUs
    Adaptec 29160 scsi board
    2 X Seagate U160 18GB SCSI disks
    1 X Seagate 200GB IDE disk
    1 X Samsung 250GB IDE disk
    1,5 GB ram Crucial and Apacer
    Edit: Problem solved, seems that I must have an PS2 mouse plugged in 
    When I tried copying with the PS2 mouse it all works
    I found this topic in www.2cpu.com
    http://forums.2cpu.com/showthread.php?s=e88a5eb9c52b6bf96d532faf85d626cf&threadid=42709&highlight=K7D+master+lock
    Speaking of strange problem... lol

    Juansebastianco,
    you can try this, to see if it makes a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still crash after being on?

  • K7D Master-L graphics problem: multiple display adapters/no winxp star

    Hiya,
    I just recently bought a new K7D Master-L and I've had a few problems with it. Other than these issues the board has been great, but this is getting pretty annoying and I can't seem to fix it, so I'm posting here for advice/help/solutions.
    System Specs: I have two AthlonMP 1900+ and 786MB Corsair RAM (registered PC2100, 512MB in slot 1, 256MB in slot 2). I have a WD400JB (40GB ATA100 drive with 8MB buffer) and a generic IDE CD/DVD-ROM. I have an ATI Radeon 9700 Pro AGP card running at 4x.
    When I first installed the motherboard I tried to load Windoze XP on it (actually I first used Linux but had ...driver problems). Anyway XP seemed to install fine, but upon reboot, the system would get to the "progress bar"/"OS loading" screen (the small blue bar that goes back and forth) and the bar would get stuck exactly 2 "bars" from where it started--every time. I could boot into safe mode, but nothing seemed screwy. Doign the command-line boot (I think) where it shows the drivers it is loading, it got to the "agpgart" file then stopped, maybe this was the problem. I gave up after a dozen reboots or so, trying various things, and installed Windows 2000+SP3.
    Win2K installed fine, and after installing the drivers on MSI's site for northbridge, southbridge, audio, and lan, and installing ATI's latest Catalyst 3.4 drivers (I also tried 3.2), device manager had no more problems, save one.
    The problem is that there are two display adapters listed: "RADEON 9700" and "RADEON 9700 (Secondary)". There were two adapters listed before I installed the drivers, called something like "Display Adapter" and "Display Adapter (VGA compatible)". In Properties it says "PCI Slot 4 (PCI bus 1, device 5, function 0)", is this normal for AGP cards? Here is a screenshot (I disabled one to see if that helped my settings-loss problem, but it doesn't):
    [ALIGN=center][/ALIGN]
    Whats worse is that the display settings don't seem to stick around across reboots--it always reverts to the default settings of 640x480x16--which is extremely annoying. These problems exist regardless of whether I have a Service Pack installed (currently I'm running on a fresh Win2K install with no updates and having the same issues). I've tried multiple drivers for the card and no change, I've tried with/without the updated chipset drivers, and I've had this same setup work on my previous motherboard (Tyan Tiger MP) without seeing multiple display adapters.
    Any ideas? Or is there something that might fix my WinXP startup freeze? If so I could reinstall WinXP and see if that has the same multiple adapter problem...
    Thanks for any advice.
    Josh

    Well my system just booted into 640x480x16, so it appears those registry changes didn't fix the issue. The registry settings were simply changed back to 640x480x16 for some reason. I haven't reinstalled the motherboard drivers, but I gathered them all up and I'll try this later today. Here are the latest drivers I found, all from MSI's site:
    Onboard AC97 Codec Driver
    Support model:   K7D Master (MS-6501)
    Description:   AMD AC97 Codec Driver version 10B
    Date:      2002-8-20
    http://download.msi.com.tw/support/dvr_exe/AC97_Codec.exe>
    Intel 10/100 LAN device driver for Win2000
    Support model:   MS-6508...MS-6501...MS-9202
    Description:   A formal release from Intel.
          For integrated Intel 10/100 Lan.
    Date:      2003-2-25
    http://download.msi.com.tw/support/dvr_exe/intel_Win2000_for_100.exe>
    AMD 762 Driver
    Support model:   K7D Master (MS-6501)
    Description:   - WHQL Certified Driver
          - Added support for Windows XP
          - Changed settings to only use auto-compensation for the AMD-762 (MP) Northbridge(2000/XP).
    Date:      2002-8-20
    http://download.msi.com.tw/support/dvr_exe/MINIPORT_533.EXE>
    AMD 768 Driver
    Support model:    K7D Master (MS-6501)
    Description:   - WHQL Certified Driver
    Date:       2002-8-20
    http://download.msi.com.tw/support/dvr_exe/POWMGMT_122S.EXE>
    AMD EIDE Driver
    Support model:    K7D Master (MS-6501)
    Description:   - WHQL-Certified for Windows 2000/XP ONLY. Version 1.43s
    Date:      2002-8-20
    http://download.msi.com.tw/support/dvr_exe/EIDE_143S.EXE>
    Microsoft Windows® 2000 Patch for AGP Applications on AMD platforms
    Support model:   K7D Master (MS-6501)
    Description:   This is a registry file for Windows 2000
    Date:      2002-8-20
    http://download.msi.com.tw/support/dvr_exe/largePageMinimum.reg>
    Award® BIOS I have 1.6 (?)
    File Size:   234KB
    Version:   1.82
    Update date:   2003-5-12
    Update Description:   Support AMD MP 2800+ in correspondance with AMD web site recommendation
    http://download.msi.com.tw/support/bos_exe/6501v182.exe>
    *** NOT USED: OLD DATE AND WRONG CHIPSET NUMBER ***
    Onboard NIC Driver
    Support model    K7D Master (MS-6501)
    Description    
    -Intel GD82559ER LAN chipset driver
    Date    2002-8-20
    http://download.msi.com.tw/support/dvr_exe/E100CE.exe>
    We shall see if this fixes the multiple adapter problem. As far as the display settings problem, I don't know that the deal is. It works fine on other motherboards with the same hardware and drivers, so it must be something with the K7D, Windows, and ATI interaction.
    Josh
    P.S.: There is a bug with this forum software and apostrohpies. Every time you preview your post it inserts escape characters ("\") before apostrphies, and also inserts escape characters for these escape characters, so quickly you have something like  "\\\\\\\'" where you want "'".

  • K7D Master-L with LAN problems

    I've just completed construction of my new K7D Master-L based machine and am running into LAN problems.  The first K7D Master-L I received had a bad IDE controller on it, and now the replacement board has intermittent LAN issues.
    WinXP Pro installed fine, and I was able to install the LAN driver from the MSI CD and get things up and running fine.  After about 20 minutes or so, the LAN connection drops out and then comes back a few minutes later.  This cycle repeats over and over.  There are no duplicate IP addresses on the network, there are no errors in the XP system log, and all of the other systems on the network continue to work fine during these down periods.
    I checked on the MSI website, and there are no drivers available for the Intel 82551QM lan controller that is on the K7D Master-L board.  Does anyone know where I can get an updated driver to try?  These types of problems are most frustrating to debug.
    Thanks,
    Norm

    Just an update to this:
    The problem is definately the onboard LAN controller.  I've tried a Netgear card as well as a real PCI based Intel Pro 100 card and both are working great.  When I take the PCI cards out and try to use the onboard LAN, I still get intermittent outages.  
    Very strange.  If any MSI engineers are listening, I'd love to hear your opinions.  According to the OS, there are no IRQ, memory, or other conflicts that might be to blame.
    Norm

  • Problems with Promise SX6000 and MSI K7D Master

    There is a problem with Promise SuperTrack SX6000 controller and motheboard MSI K7D Master.
    We use most fresh bios for both products - version 1.5 for motheboard and build 77 for controller.
    With previous controller's bios version it can't be initialize and now after initialisation the bios of controller does not show up.
    It seems to be like one of problems wich are described in controller's manual, but this problem can't be decided by user's hand, but only new version of bios, we think.
    What you can help ?

    No ways ?

  • MSI K7D Master L - CRC Problem

    Hey gang.
    I've been having some CRC troubles with my MSI K7D Master L.  On most occasions, I cannot perform an install from either of the cd drives--eventually a CRC error will pop up.  In addition, data on the hard disks (i.e. registry settings) dissapear or are corrupted.  Which sucks.  ...and you can imagine how my slightly corrupted windows install is performing :(.  ?(
    Here's my specs:
    -AMD MB 2800+ Barton (Only one CPU installed right now)
    -1024 mb of Kensington ram
    -ATI 9700 Pro
    -Bios Version 1.3 (latest bios for Master L)
    -Enermax 431watt power supply
    -Creative Audigy Sound card (onboard sound disabled)
    Just for reference, I've ran all the diagnostics (memtest86, and that IBM hard disk checker) and no problems show up.  Only the motherboard and processor are new... all of the components, cables, drives, etc. were working well before I poped in the new MB.  Of course, I started fresh with a clean formatted drive for my windows install.  
    I've heard that my Enermax 431 is about a 10 on the blows-O-meter.  Could this be the problem?  I realize that my new AMD 2800MP is prolly pulling out a bit more juice than before.  
    I love this motherboard, and I know that CRC errors are pretty rare on the K7D (cough, unlike some other MBs), I'd hate to have to RMA it.    
    Thanks in advance ,
    JonnyLongTorso

    Replaced the Enermax 431 supply with an Antec 550 watt unit.  Still getting the errors.  
    Any ideas?

  • K7D Master L + Leadtek TI4600 Problem

    Hello,
    My K7D Master L Mainboard could not boot ( no video ) with Leadtek TI4600 ( AGP 4x ) Graphics Card.
    Boots fine with other cards ( ex radeon 8500, radeon 9800, -Gforce 4400- )
    Any ideas why ?
    MSI k7d master L
    2*2600MP
    2*512 Kingston ECC REG 266mhz
    2*IBM 40GB
    SB Audıgy
    DVD RW
    CD ROM
    Thermaltake 420W PSU Purepower

    Does it need a power connection at the back some cards require an Aux power supply
    if not maybe a faulty card

Maybe you are looking for