Movie Controls Not Showing

Hello Everyone,
Here is the problem: I have posted movies to my web page, but the fast forward & reverse buttons at the bottom right of the movie are not showing up. I originally had kioskmode set to on, but have removed it since. I also tried exporting the movie with internet streaming-fast start enabled.
Any suggestions?
Here is an example - click "Placeholder" http://homepage.mac.com/badelstein/parti/port/splshscr/splshscr.html
Thanks for the help. Bill

Found out that CSS was calling out a div width smaller than the movie width - reset to movie width fixed problem.

Similar Messages

  • Movies do not show up on AppleTV but they are in iTunes

    I have around 220 movies in iTunes.  Most all were purchased through Apple.  I am having an issue where several of my movies are not showing up on my Apple TV.  The movies that do not show up were all purchased and watched on my Apple TV but once it synced to my iTunes library they no longer show up.. I have reset and restored everything including my entire iTunes library, took almost an entire day, but still have the same issue.  My apple TV is a 1st gen. The ones that do not show up are a mix between HD and SD so that is not the issue.  The only common thread between these movies is that they were all purchased and watched initially through my apple TV. HELP please!

    As far as the resolution, I do not have the exact info but they were all purchased through iTunes via my AppleTV.
    Examples:
    - Journey to the Center of the Earth HD and SD
    - Tranformers HD and SD
    - Journey 2: The Mysterious Island SD
    - Sherlock Holmes SD
    Thats just a few of the movies that do not show up on my AppleTV but are in iTunes and can be played on my Laptop or synced to my iPad, iPod, iPhone and iTouch.
    I have tried syncing these movies to my AppleTV and it shows syncing but completes way too quickly and the movies are not on my AppleTV.  When I look at my AppleTV via iTunes the movies are checked off so as to sync.  No exclamation point or any error for that matter ever occurs.

  • Goods movement list not showing EAN in Order Unit..!

    Hi Guys,
                   I have an issue with goods movment list (tcode MB26).
    good movement list not showing EAN in Order Unit..!
    EAN No. and Storage Bin is maintained in Material Master but its not showing up Goods Movement list.
    Please find the screen shots.
    Thanks
    Sam

    are you still in 46c release? for 46c exists an OSS note to fix the issue with the bin:202240 - Transaction MB26: Storage bin is not supplied

  • Movie rental not showing up in play list even though I confirmed purchase - where did it go?

    Movie rental not showing up in play list even though I confirmed purchase - where did it go?

    Downloaded films (and those synced from your computer) should be in the Videos app (iTunes on the iPad is just the iTunes store) :

  • Skin Control not showing

    Hi, I'm using Flash 8, producing and swf file and inserting
    on the website. Seems to play just fine but I can't see the
    transparent control over the movie. Tried right clicking and it
    does not appear. Is is just not finding the skin. I am rendering it
    with the skin from an avi file. It shows up in Flash just perfectly
    but does not show on the website. The skin and swf file are located
    in the same sub. The file is on the index page. I'm using front
    page to insert the movie

    Hi Gurus,
    I tryied manually and i found that
    1) in table control when i edit,delete or modify value  then impact on ztable is Below table.
                     Budget No    Sales dist       Material           Budgeted Units
       A :-   01    001747       430203           S0116649                    1,382
       B :-   01    004267       430203           S0116649                    1,050
       C :-   01    004280       430203           S0116649                        0 
    Line A is my first record
    Line B when i modify again new entry is going to create with New budget No
    Line C when i delete data from table control  again it create new entry with diff budget No and  Budetget Units set to zero.
    why each time new entry going to create ?

  • Flash Controls Not Showing On Web Page

    Hi-
    Been beating my head lately using Flash Pro 8 and DW 8.02.
    Here is the latest difficulty:
    Created a Flash video file in Premiere Elements 4
    Imported the .flv Flash video file into Flash 8 using import
    video
    Added an external skin to the video
    Saved Flash .fla file
    Exported movie in .swf format
    I can open the .swf file in Flash Player 8 and it works fine.
    I can also use the Publish setting in Flash to export the necessary
    files as well as the HTML file. When viewed in either Firefox or IE
    it plays correctly and the player controls are present. However, if
    I create a new page in DW8 and then Insert > Media > Flash,
    point it to the .swf file and then view it in Firefox or IE I can
    only see the .flv Flash video file and none of the controls/skin
    that should be there. I know the controls/skin are actually present
    because I can browse directly to the .swf file and it displays
    works properly. I can also use the publish settings from Flash to
    create the HTML page and it works correctly as well. It is only
    when the page is generated by DW8 that I get this problem. I have
    looked at the code created by DW8 and cannot find any reference to
    the .swf file for the movie controls/skin. Any idea why DW8 would
    only be placing the Flash video .flv file on the page and not
    writing the code to place the entire Flash movie .swf on the page?
    I have tried restarting/rebooting, created a new "clean" test page
    with only the Flash movie on it and it is always the same. The
    other thing that is weird is I did not select Autoplay or Loop in
    the DW8 settings nor in Flash 8, yet when I preview the page
    created by DW8 in a browser, piece of the Flash movie I can see
    (the Flash video part) autoplays and loops!
    Again, any help is appreciated.
    -=SB

    Update- This is what I have discovered while playing around
    with the page and Flash file:
    If I create the .swf files for the movie and skin and then
    save them to the same directory as the .Flash video file and then
    view the .swf file everything works fine.
    If I then create a web page using DW8 and insert the Flash
    into the page and save the web page to the exact same directory as
    all the other files and then view the web page in a browser, it
    works fine. However, if I create a new web page in DW8, save it to
    any other directory other than the one where the .swf and .flv
    files are located and then view the page in a browser only the .flv
    Flash video portion of the movie will display in the browser--the
    controls are missing. However, if I browse directly to the .swf
    file and avoid going through the DW8 generated web page the Flash
    movie displays properly with the controls in the correct location.
    My question then is why will DW8 not show the Flash movie with
    controls if the page is located in higher level directory than the
    .swf and .flv files and yet browsing directly to the .swf file with
    my browser works just fine? I have checked the path to the .swf
    file in the DW8 source code and it is pointing to the correct
    directory location. This is so strange--why will it display one way
    and not the other? Any ideas?

  • New movies do not show up in appletv

    Hi all,
    I have an appletv1, always worked great. Buts ince today new movies I add to my itunes will not show up on appletv. It does show the movies that were already there, but not new ones I add - even though they are the right format and I can see and play them in itunes on my imac no problem.
    The only change I had to make was to the network connection; we bought a new wireless router as the old one broke down. That's the only change that could cause it but as said movies that were already in itunes still show up, it's just new ones I add that the apple tv doesn't see, even after resetting and so on. Anyone got a solution? thanks!

    Aghh, the reason for suggesting the sync as a diagnostic step was to try to establish what else if anything wasn't working.
    I'm thinking that either you paired your library incorrectly when you set up your new iMac or an error has occured that has turned off syncing for you. To revert to a syncing library, disconnect from the Apple TV (Settings/Computers/Your_Library) and reconnect again (Settings/Computers/Connect_to_iTunes) - You will need to re-sync previously synced content.
    Not sure if this will resolve all your problems, but it's a start, I'd see how things go when (if) you are able to do this.

  • All movies do not show up on my iPad.

    It seems like it happened after I upgraded iTunes to version 11.1.0.126
    All movies show up in ITunes, but do not show up on the device to choose which to be sync'ed

    I solved it myself.  I had to go into the Movies Library of iTunes and 'check' the boxes of the movies I want to show up to be able to sync.

  • Purchased movie does not show up in Apple tv

    Hello,
    I just bought a movie (Valkryie with Tom Cruise)...and for some reason it does not show up in my purchased movies on any of my devices (Apple TV, iPhone) and it also does not show up as purchased in my iTunes library.
    This is the only movie where this has happened. Even stranger, I could not find the movie via Apple TV (not even by search) but could find it in iTunes (bought it and it downloaded to my Macbook). Even after it downloaded, it still does not show up in my other devices.
    ANyone have any ideas??

    Apple has not reached a deal with all movie studios to allow the re-downloading of purchased content. The likelihood is that the movie you have purchased is from a studio that has not licensed its products for re-downloading.

  • My movies are not showing up in iMovie application?

    Hi,
    I just uploaded 5 movies from my camera to my iMac using iPhoto. I can see them all in there. Here is a photo.
    When I drag the movies out you can see in this picture above the iPhoto app (top left). If you notice an older one has the Quicktime symbol and the newer ones have the picture of the video. These do not show up in iMovie and I'm not sure why.
    S.

    There was no option of Movie to TIFF but an Audio to TIFF and other ones. I chose the Movie to Quicktime movie and it didn't work, also tried the audio to TIFF and it didn't work.
    TIFF??? Who said anything about TIFF compression? "TIFF" is a graphic image compression format that will be listed in the option window of the "Movie to Picture" Export pop-up. "AIFF," on the other hand, is an audio compression format that is compatible with iMovie '08. In any case, sorry -- I should have said "Sound to AIFF" here.
    NOTE: It is not necessary to extract the audio to a new player before performing this audio conversion, but I usually use this work flow in case I should do something idiotic and end or accidentally ruining my source file. In addition, if your original audio is mono, you should probably use a mono setting for the AIFF conversion but either will work here.
    After Add to Selection and Scale I assumed I should also go to Edit and click paste which I did.
    If you have the "Properties" window open for your original clip, you will see that the "Add to Selection and Scale" Edit option adds a second audio track to the movie (which then allows you to delete the original incompatible audio track). If you then immediately perform an additional "Paste" action, you will note that the "pasted" audio is added to the end of the track which was previously added by the "Add to Selection and Scale" action and you end up with a clip twice as long with audio repeated and no video for the second half.
    The second one where I chose sound to AIFF would play all the way through fine and then would repeat the whole movie again with only the sound and no picture showing. It wouldn't show up though either when I tried to open iMovie.
    See explanation above for double playback. As to why the AIFF file would not import, did you remember to delete the sound track with the incompatible µ-Law audio? As long as that track is in your clip, it will not import.

  • Most of my movies are not showing up in my library or my devices. what can I do?

    Out of all the movies Ive purchased only 4 or so are showing up in my library and same with my ipad which used to display all my movies even if they were not downloaded onto my ipad. how do I fix this?

    Hey there La Reveuse,
    It sounds like your iOS devices and computers are not showing your Movie purchases from iTunes anymore that are not downloaded to them. On your iOS devices you can check to see if the option to show all your movies is enabled in Settings > Videos. On your computer(s) this option is labeled Show iTunes in the Cloud purchases in its preferences.
    iTunes 11 for Mac: iTunes Store preferences
    http://support.apple.com/kb/PH12263
    or
    iTunes 11 for Windows: iTunes Store preferences
    http://support.apple.com/kb/PH12468
    I if this is enabled on your devices, I would next check to see if the purchases have been hidden with this article:
    iTunes Store: Hiding and unhiding purchases
    http://support.apple.com/kb/HT4919
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • ITunes movie purchase - not showing in cloud library on iphone

    Hello
    Yesterday I redeemed a 25 dollar USD ITunes gift card.
    I used it to purchase two movies.
    The second movie I purchased (Brick) ended up using a cross between iTunes credit and my credit card.
    Anyway, I can see it in my purchase history on my iPhone 4s.
    But you know how when you're on wifi it shows your purchases with a cloud icon?
    Brick for some reason does not show up. The other movie does but not Brick
    Tried rebooting and stuff
    (Shows on Apple TV)

    Hi WC, well as promised the results . . . . I redownloaded the triology (thanks support) but it made no difference. I still couldn't see The Bourne Identity in my Apple TV library (still all OK in library on my Mac). So ended up with two copies of all three films. So sent an email back to support this was their reply below (just received)
    Carole Anne here. I see you are still unable to watch the last movie in the Bundle you purchased. I know how eager you are to watch your movies so I am going to do all I can to be of assistance.
    I have reversed the charge for "The Ultimate Bourne Collection". In five to seven business days, a credit of 13.99 GBP should be posted to the credit card that appears on the receipt for that purchase.
    I hope this helps, and again, please do not hesitate to reply to this email for further assistance. Have a great day!
    So looks like even Apple iTunes support can't work it either. I'm gonna put the re embursment towards buying the four film bundle and hope that it works better. Thanks again for your help WC. BTW whilst wifey watches Pointless I record The Chase . . . . I like it better too.

  • Movie titles not showing up on SD card. TX with PQDVD

    Hi all, I am a new Palm TX user and have already gleaned much useful info from these forums.  I have purchased the PQDVD video program and it works fine except for one small quirk.  The movie titles do not show up on my SD card they way they do when i view the files on my computor.  Instead I get a generic black and white still of a peice of movie film and I have to start the movie to see which one it is.  Once started the movies play fine on the TX.  I am using a windows computor running XP home edition.  I download the files using quick install.
    Thanks,
    pyrate
    Post relates to: Palm TX

    What program are you using to view the movies?  Media?  TCPMP, as recommended many times here?
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Imported .mov files not showing up in IMovie

    I downloaded 6-7 .mov files yesterday.   All fairly short 5-10 second clips.  The first 3 imported just fine and showed up in IMovie where I am editing a movie.
    Afterwards, when I selected "import" the computer responded the same way, as if it was importing, creating thumbnails, etc and the video shows up in finder in the right place but it does not show up in IMovie and I cannot use it in my movie.
    I selected "show all clip" and still they do not show up
    I tried importing to iPhoto first and then to iMovie but it still does not show up.   It does the same thing - acts like it is importing, creating thumbnails etc.
    THe first three that I did are still there, just fine. 

    Thanks for responding. These videos were shot on a colleague's camera then loaded to an FTP server for me to download. I have them as MP4s (though I've tried to import them after converting to .mov and .avi, still to no avail).
    I've loaded them into iPhoto, but still nothing shows up in iMovie when I click the "iPhoto Videos" tab. It's like iMovie can't see them, even though I can see and play them when I go back to iPhoto.
    One other point of interest: I tried the same process in my older version of iMovie HD, and there they would load only as audio.
    I'm flummoxed.

  • Movie is not showing...

    I burnt a DVD off of a client of footage they took from a handy cam. I am trying to open and view it it but it's not showing. But a message pops up and says that the DVD is not a movie file but some other kind of pov file or something. I put it on a PC and it did open as an Mpeg file. What would be the problem with opening it on a MAc? How do I open it? My purpose is to capture and import it onto Final Cut Express and edit it.
    Keep me posted,
    Claustro
    Imac   Mac OS X (10.0.x)  

    Download the MPEG Streamclip here:-
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    The QT component is available from Apple for about $20 but you will have to enquire as I don't know exactly where.
    Ian.

Maybe you are looking for