Movies offline after restart, "media pending", no re-connecting possible, EL12

Hi,
i was working on a project with .MOV files and Audio (mp3). All worked fine, however when i restarted the programm, the movie files where offline, it says "media pending". Manual re-connection not possible (everytime i choose the mov file it asks again to locate the certain .mov file).
The .MOV files seem not to be damaged, can see them properly in Quicktime.
This happened the second time now. After tghe first I started all over a new project, Same result. Worked fine, next day after restarting... .MOV files not shown anymore.
Using Premiere Elements 12 on a Mac (10.7.5)
Thanks for any help, please let me know what further infos you need.
Ralf

Beraya,
If the problem with that Project IS the Assets, your MOV files, this test might be worth a bit of exploration.
First, Open the problem Project, and Save_As_a_Copy, locating that onto an internal HDD (Hard Disk Drive).
Exit from PrE.
In Finder, Move your used MOV files to a new folder, also on the internal HDD, and make note of that new loacation.
Launch PrE and Open that Save_As_a_Copy Project.
Since the MOV files have been Moved, you should get a message, "Where is file ____ ?" There will be a dialog box to Finder, for you to locate those MOV files, in the new location, to where you Moved them. If you select the first "missing file," then PrE should survey that folder for all missing files, Relinking to each, in that new location. This Tips & Tricks article will give you more details on that "Where is file ____ ?" message: http://forums.adobe.com/thread/990503?tstart=30
When all of the MOV files have been successfully Relinked, test that Project, and please report.
Now, if you have made a note on the exact MOV files, that are causing a problem, I would Move those instead to a separate sub-folder, from the "known good" MOV files. This will allow you to Relink those "known good" MOV files, and you will then get the "Where is file ____ ?" message for the ones in that new sub-folder. Repeat the Relinking process, but watch to see if they again are causing issues. That could narrow things down to just a few files, that might need to be investigated more in depth.
The reason for the Save_As_a_Copy is so that nothing will interfere with your original Project - it will not be used for this test, or touched in any way.
Good luck,
Hunt

Similar Messages

Media Offline After Restarting

I rebooted my computer and when I came back to my PremierePro project the Media was offline. The video appears in the viewer as "Media Pending", but it never loads in. In the project assets window, there is a question mark icon next to each media clip.
I didn't move the source files, nor delete them. It appears PremierePro has lost reference to them, that the index file is broken. I made a New project and the media load just fine and I can edit them.
How do I fix this? I need the edits in this project file, it will take me a long time to re-edit them if I can't get them to load in the original file.
Help me ObiWan, you're my only hope!

As I edit, I will do a Save_As, along the way, incrementing my Project's name, with say the addition of "001," "002," etc.. At the end of the day, I then do a Save_As_a_Copy, as Jim suggests. That is my "fail-safe," incase things go wrong.
The difference between the two is basically what happens with that Saved Project. Save_As, will do just that, and with an incremented, or changed name, and then keep THAT Project Open. Save_As_a_Copy will do a Copy, where you direct the program to write it, with any name that you choose, but will NOT keep that Copy Open.
This article goes into more detail: http://forums.adobe.com/message/3392837#3392837
I use a combo of Save, Save_As and Save_As_a_Copy, at different stages in my editing, plus also keep the AutoSaves, just in case. With Save_As and Save_As_a_Copy, there will be a new set of AutoSaves created in the folder structure of the "new" Saved Projects. Those can be handy, just in case something goes terribly wrong.
Good luck,
Hunt

HP LaserJet Pro 400 m401a Go offline after restart the pc

i just buy a new HP Laserjet Pro 400 m401a and i install the drivers from the dvd that i found with the printer
but after i finish and shut down the computer i found the printer offline i try to remove the usb cable but nothing
i install the driver again i work but after restart same problem again
i have 2 printer conected with 2 computer the problem the the 2 printer
please tell me what to do
thank you

I would recommend posting this in the HP Enterprise Support Forums for better coverage.
You can access the enterprise support forums at the following link.
http://h30499.www3.hp.com/
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Unresponsive system but mouse still moves; even after restart

I was transferring a few files over my LAN wirelessly via file sharing to another macbook (B) when that macbook was closed and caused a disconnect. My macbook (A) has experienced issues since this disconnect. Even after restarts and resetting the pram, my system is unresponsive. The mouse will move but I cannot open applications, folders, files, or even the menu. It is as if my mouse is moving over top a picture of the desktop. I did manage to click and highlight my HD icon once but as soon as I did, the color wheel showed up and never stopped. My hard drive has over 10GB of space free. I was able to do a target disk boot and test the drive and its ok according to disk utility. Any ideas about what I could do would be greatly appreciated...preferably without wiping the hard drive.

The first issue occurred while I was transferring large files from one computer to another via afp file sharing over my wireless network. In the middle of this transfer, someone closed the receiving macbook. The macbook sending the files didn't respond well after this. It would intermittently freeze without a linked resource draining process. I believe the first occurrence was when I tried to right click a file that had been interrupted during transfer. I forced a restart, used the killall Finder command in terminal thinking that it might still be trying to transfer the file to a ghost in some way...even though that didn't make sense. I was able to verify and repair the external drive the file was on. After doing this and resetting the PRAM, it was back to normal for a little while. After a bit of normal activity (nothing strenuous), it began to freeze again. I tried the same steps and also booted in target disk mode so I could use the other macbook to run diagnostics. The drive got repaired. I attempted to restart the affected macbook but I couldn't do anymore than one thing and the never-ending colorwheel would appear. That one thing could be a single click on a file or an attempt of opening an application. After that I turned to this discussion forum after already impatiently attempting to safe mode boot and repair disk permissions. I tried this again with patience after your suggestion. It worked for a few hours and I was able to surf the web once more and go about the usual. I pulled up dashboard and pressed command+ to bring up the list of widgets and it froze on me again. I attempted previous steps again after restarting but there has been no difference in response. Throughout the entirety of this experience, there have been no error messages. Also, there's no difference in behavior if I disconnect everything but the power cable.
Sorry for the lengthy post but hopefully it will be helpful.
Message was edited by: AG_Jazz

Simcard offline after restart (Nokia X 1.1.2.2)

hi
please help me
after update to ver 1.1.2.2
every time I reboot my nokia x. my simcard into offline and I have to activate it manually..
I've never experienced when using 11.1.1
please help me
sorry for my english

How old is your sim card?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

After restarting my Mac does not connect wifi preferred

Hi Everyone!
My Mac Air does not automatically connect to desired Wi-Fi network.
I have already done:
1- I Checked my TCP/IP settings in the Network ( I did Renew DHCP lease).
2- I Removed networks from my Preferred Networks list.
3 - I Removed my stored network passwords.
4 - Restarted
5 - Joined again.
But after... When waking from sleep does not connect..
Could you help me.
Many thanks guys

there is no one fix solution to wifi problems, your issue is nothing new please refer to this link
if you haven't read it ,
https://discussions.apple.com/message/24691862#24691862

My macbook keeps losing wifi connection after restarting and I can't connect to my wifi in recovery mode

I have two problems actually, which I think are connected.
I installed a new hard drive and am in the process of returning my macbook pro to normal. I'm now using Mac OS X 10.6.8 and I want to be able to update to OS Lion.
When my computer is on it can connect to our wifi without any problems (so the password is working). However, everytime I restart, it looses the connection and does not automatically reconnect. This never happened before and I can't seem to figure out where I can change this. All I have to do to reconnect is go to the wifi symbol and choose our wifi code. It then automatically connects without me needing to type the access code.
The seconde problem is when trying to update to OS Lion, when in recovery mode, all I get is a screen asking me to connect to wifi. I choose our wifi and now I do have to type a password, but whatever I do, it does not accept the code. It has nothing to do with capslock or anything like that.
We are sharing our wifi with our neighbour, so changing the password is not an option. But is is just a simple letters and numbers password.

Why not do a "Restore" in iTunes to set it back to factory settings? That will eliminate any previous information that is causing you issues in use. You will have an iPod which you can sync as if it is new with your settings and info.

Azure VM does not connect via RDP after restart

I have restarted my VM running Windows Server 2012 from Windows Azure Portal. After restart it is unable to connect via RDP, although I can connect to it via FTP I had created already. I have ticketed the issue at Windows Azure Support but no reply in past
2 hours.
Any help please?

Hi,
What is the error message you are getting ?
Please check this
document that might help which talks about How to troubleshoot common RDP issues for Windows Virtual Machines in Azure .
Regards,
Shirisha Paderu

Iphone requires password after restarting??

Hi.
My iPhone broke so my brother gave me his old 4s. I got it and it was jailbroken so i did a complete factory reset and updated it to the latest firmware. I gave it a full charge and the next day once it went to about 80% it turned off randomly, i tried turning it on, sometimes it would other times i would need to put it in charge again. It would always say once i had turned it on "Iphone requires password after restarting" so i assumed it was possibly a battery problem. So i bought a battery from ebay with decent ratings and replaced it. The iPhone no longer turns off every 10 minutes, but the battery does only last about 3-4 hours and usually once it goes to 15 or below it will turn off. Any idea what could be causing this?

I know it is normal, but is constantly restarting. As I said, this problem was happening every 10 minutes making the phone completely impractical before i replaced the battery, so changing the battery has actually made my phone usable and I actually get a good solid few hours on it whereas before i wasn't.
This would surely indicate that it is a problem other than the battery and its not really a question of the quality of the battery I have bought as the problem was persisting with the stock apple battery before hand.

Error Message for "Media Pending" or "Media Offline"

This is INCREDIBLY frustrating.
It is my job at a church to produce broadcast-quality segments for our local tv stations for 28 minute slots. I am working with HD-quality videos, bumpers, audio files, etc. It takes my PC about 30 minutes to render each segment and I work with about 4 segments a week. Add that up, and it takes me two straight hours to render each finished product (not counting any edit work), all which have to be done in a day because we broadcast most of the stuff that happens on Sunday the following Tuesday.
That said, I render the final product, after everything has been through quality-control, through encoder because of the FTP option. When I leave every Monday afternoon, I start the queue for the four segments, which, in turn, will spit out the product and FTP it to our server at the tv stations.
But when I come in Tuesday morning and find that AME has rendered four USELESS videos because, instead of informing me when I started the queue there was something wrong with fetching the video files, it decided to render some stupid stock frame of either, "Media Pending" or "Media Offline" - which makes ABSOLUTLY NO sense, for when I open premiere or after effects, it renders quite fine through AME. You can't sit here and tell me that the rendering software requires the project to be open in Premiere or AE. That would be counter productive and impossible for anyone batch-rendering.
Here is what I need: Just a simple, "Hello, there was something wrong with fetching all of the media files in your project (blank, blank, blank) - please check your project file."
Thanks!

Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Slow/unresponsive video playback, media pending, after CC'14 October update

Encountering a strange issue after the October update. It's a project carried over from the previous CC'14 version, nothing crazy, about an 18 minute timeline of video/.mov clips straight off a JVC GY-HM600U with simple RGB curves/masks on some clips, some Prores422 clips of graphics exported out of After Effects, a couple nested sequences featuring simple text w/ cross dissolves, and a lower 3rd Quicktime with RGB+Alpha. There are some linked AE comps in the project but not in the sequence. Ran fine before update. Here's my system, obviously no CUDA so Mercury Playback is software only:
Upon opening the project everything is fine, playback is smooth, scrubbing from beginning to end no problem. After a period of time, 10-15 minutes? Suddenly video playback hangs up, with audio continuing to play after . Opening a clip in the Source window displays the Media Pending thumbnail, after 15 seconds it seems to find the media but again it's only a still frame with video hanging up. Then audio seems to hang up and I can't do anything. I can still manipulate the UI but scrubbing through the timeline is completely unresponsive, pressing play does nothing.
Quitting the program seems to freeze it, the window closes but it stays lit up in my dock and shows Application Not Responding, causing me to force quit.
A system reboot yesterday seemed to clear the issue up for the remainder of the work day but it's back today. Not sure where the issue is coming from, but seems like some kind of memory leak or something similar since it seems to be a gradual degradation in performance. I'll have to roll back to a previous version to finish up this project until things are fixed.

Hello,
Many thanks for your very long reply and your interest in my problems.
I shall try to answer you :
- 1) OS : Windows 7 64 bits Pro SP1, french,
                 Version : 6.1.7601.18247 (Win7RTM)
                 Framework.NET : 4.0.30319.18408 built by : FX451RTMGREL)
                 DirectX : 11.0,
                 OpenGL : 6.1.7600.16385 (Win7_rtm.090713-1255).
- 2) Yes the media pending goes away but after a couple of minutes (one
year ago I was using PP CS6 and Encore CS6, I never had this problem
even with very long files),
- 3) Yes my GPU driver is updated (Nvidia GeForce 332.21 dated 12/19/2014).
I never had thiese problems with PP CS6 + Encore CS6 and my projects
built with these PP ans Encore version were with the same structure and
length (in PP CS6 : sequences up to 45 minutes, in Encore CS6 chapters
up to the same time).
The difference between are in my hardware :
- the RAM was upgraded from 12 GB to 24 GB,
- the CPU was overclocked from 3,2 GHz (default) to 3,88 GHz).
- 4) I shall try up to the disk burn to check if the problem is just due
to display of "animated buttons".
I hope my answer will be usefull for you.
Regards,
Jacques Gourier.
Le 11/02/2014 19:53, Stan Jones a écrit :
>
      Re: Media pending with Encore CS6
created by Stan Jones <http://forums.adobe.com/people/Stan+Jones> in
/Encore/ - View the full discussion
<http://forums.adobe.com/message/6110278#6110278

Media pending/offline footage cs6 help

I've just imported a ton of clips into a premiere file im working on. But its being incredibly slow in loading them. Right now its stuck on "generating peak file for MVI_0870.MOV". keeps getting stuck on this one clip. i've deleted the cache and moved it to a temp folder. Working off school computer so i dont know what else to do. changed computers a few times and restarted premiere a few times. half my clips show the ? symbol on them. others have a preview image but when you put it in the source window it says media pending. other clips are just grayed out. Even the clips that were in my project before won't load. been here 2 hours and need to get this done. help me?

FAQ: What information should I provide when asking a question on this forum?

Found Fix for "Media Pending" with MPEG Videos (after 4 years)

This is for Premiere CS3.
Very often, if you make any changes to your system, or move files around, Premiere can lose track of the database that keeps track of MPEG2 video clips. The result is a persistent Media Pending display instead of your video. Cleaning the Media Cache doesn't fix it. Deleting all the temp folder media cache doesn't either. Here's what I found that works:
Go into this folder:
C:\Documents and Settings\<User Name>\Application Data\Adobe\Premiere Pro\3.0\MediaIO\Cache
The <User Name> will be your login name of the Windows account.
Delete all the files that are in this folder.
Restart Premiere and watch it re index your video and your video reapear again.
Took me FOUR YEARS to discover this one on my own!

This is for Premiere CS3.
Very often, if you make any changes to your system, or move files around, Premiere can lose track of the database that keeps track of MPEG2 video clips. The result is a persistent Media Pending display instead of your video. Cleaning the Media Cache doesn't fix it. Deleting all the temp folder media cache doesn't either. Here's what I found that works:
Go into this folder:
C:\Documents and Settings\<User Name>\Application Data\Adobe\Premiere Pro\3.0\MediaIO\Cache
The <User Name> will be your login name of the Windows account.
Delete all the files that are in this folder.
Restart Premiere and watch it re index your video and your video reapear again.
Took me FOUR YEARS to discover this one on my own!

My computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?

my computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Premiere Pro CC freezes after opening project. "Media Pending"

So I'm editing a music video I filmed with a Canon 60D, 1080p 23.976 fps, and i was chopping and layering clips that had not yet been rendered for the colour correction done on them, which was a slow process. (I have a mid 2010 mac book pro with an upgrade to SSD's and 8GB of ram, 2.4GHz Intel Core i5, and NVIDIA GeForce GT 330M 256MB, running os 10.9.2).
ANYWAY, I had to save and close it without rendering it yet and whenever I try and open it again, it opens the project, but then freezes and I get the spinning beachball of doom. I can see the sequence and all the edits that I had done, but the program window is yellow and says "Media Pending". I have to force quit to get out of it because it always says Premiere Pro CC is not responding. This does NOT happen with any of my other projects. This particular project is not crazy huge, but it's larger than my other projects which are few and it's certainly enough to make my macbook cry. I will be very grateful for any help.

Hi Reinhard,
Reinhard Kungel wrote:
PP CC crashes quite often.
Sorry to hear that. Please check out this doc: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
You also might try the following:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Delete media cache
Delete preview files
Remove plug-ins
If you have AMD GPUs, make sure CUDA is not installed
Repair permissions
In Sequence Settings > Video Previews, change the codec to one that matches your footage
Disconnect any third party hardware
If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCL
Disable App Nap
Reboot
Report back if anything here worked for you.
Thanks,
Kevin

Movies offline after restart, "media pending", no re-connecting possible, EL12

Similar Messages

Maybe you are looking for