Azure VM does not connect via RDP after restart

I have restarted my VM running Windows Server 2012 from Windows Azure Portal. After restart it is unable to connect via RDP, although I can connect to it via FTP I had created already. I have ticketed the issue at Windows Azure Support but no reply in past
2 hours.
Any help please?

Hi,
What is the error message you are getting ?
Please check this
document that might help which talks about How to troubleshoot common RDP issues for Windows Virtual Machines in Azure .
Regards,
Shirisha Paderu

Similar Messages

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

Macbookpro does not connect to wireless after osx 10.7.4 upgrade

My MBP has stopped recognising my wireless connections post THE OSX 10.7.4 upgrade. It detects the modem and asks for password, but Does not accept, nor connect.
But strangely enough, if I sit next to the modem, the Mbp connects easily.
My other Apple products connect to the same modem without issue.
Have tried all basic checks both with the modem and also the mbp...but no Solutions so far.
Anyone else with à similar issue?...Amy help Will be welkome
Regards
M

This is only the site for Toshiba USA, so I don't have any information on your model. If you were using a US unit, I would recommend this article:
Troubleshooting Wi-Fi (Wireless) Problems
You may want to check the Toshiba Europe forums.
- Peter

Lingoes translation does not connect to site after install Firefox 4 & after restore to 3.6.16, why?

Running Windows Vista Home Premium on a dual processor with 4 GB of RAM and a HD with 50% empty. Yesterday downloaded Firefox 4 only to find that Lingoes translation software that must connect to the web site for the translations could not; as some other privacy software (GoogleShare & Tor) could no longer be used decided to restore to Firefox 3.6.13, subsequently updated to 3.6.16. While GoogleShare & Tor now function, Lingoes still does not.

Simply download the latest version, Lingoes 2.8, which provides a firefox plug-in to support the feature of text capture.

Airport does not connect fast enough after sleep on Mac OS X Snow Leopard

Ever since installing Snow Leopard, I have noticed that my Airport will not connect fast enough when I am waking from sleep. I sometimes have to wait upwards of 30 seconds after waking from sleep so Airport can connect and I can begin using the Internet. I notice that Airport says it is connected, but when I launch Safari, I get the "Not Connected to Internet" error message. I have tried removing the com.apple.airport.preferences.plist file to no avail. I have also tried Archiving and Installing and the issue is still there. Any ideas or fixes? Thanks.

Those seem to happen a lot when you have stealth mode enabled (Security System Prefs, Firewall, Advanced). For me, they all seemed to be innocuous so I turned it off. I don't think this would affect your connectivity, though.
You should also see it negotiate the connection. Is there anything that looks like it is repeating or retrying or other disconcerting messages? Here's an example of mine waking:1/5/10 8:27:36 PM kernel Wake reason = USB1
1/5/10 8:27:36 PM kernel System Wake
1/5/10 8:27:36 PM kernel vmmon: powerStateDidChange flags=0x82 (state 4)
1/5/10 8:27:36 PM kernel Previous Sleep Cause: 0
1/5/10 8:27:36 PM kernel USB (UHCI):Port 2 on bus 0x1d has remote wakeup from some device
1/5/10 8:27:36 PM kernel EIR is not supported.
1/5/10 8:27:37 PM kernel en1: 802.11d country code set to 'US'.
1/5/10 8:27:37 PM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
1/5/10 8:27:38 PM kernel AirPort: Link Up on en1
1/5/10 8:27:38 PM kernel AirPort: RSN handshake complete on en1
1/5/10 8:27:38 PM configd[14] network configuration changed.

HP Deskjet 3000 does not connect via Wireless to Windows 8.1 any more

Good day. My job requires me to move with my laptop (Asus X54C with NO bluetooth, only wireless) between multiple workplaces. One of these offices has an HP Deskjet 3000 wireless printer, which I used with no problem whatsoever under Windows 8.0 64-bit.I didn't even need to install its drivers, because Windows 8 would instantly recognise the driver's wireless signal.
Then a month ago I decided to update to Windows 8.1: after that, the printer suddenly stopped appearing in my “Network Connections”. I tried to uninstall the drivers and reinstall the 8.1 signed drivers by HP, but to no avail. The printer is recognised and works perfectly with an USB cable. I clearly recall seeing it on the right-hand pane (“Networks”), but since the 8.1 update it isn’t there anymore. The icon in the System Tray tells me that “connections are available”, but I can see no connections at all. In that particular office there is no Internet connection or other wireless connections apart from the HP printer (that however I cannot connect to). I'd like to point out that the wireless function is OK because a colleague of mine can still print using his Mac's Airport connection.
I have already posted in the Windows 8 (Microsoft Answers) Forum, but nobody has ever answered. You can find the thread here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/winows-81-not-finding-wireless-...
Any ideas?
Thanks in advance.

Hi,
Please reinstall the following package:
http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63287.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

E71 does not connect to gps after ovi map 3.0 upgr...

Hello.
I have just upgraded my maps application and now I can not seem to connect to gps, the indicator is red. I tried settings and in positioning it says waiting for gps. Pls advise how I can use my maps again.
Thank you.

ballistictushar wrote:
Phones with free navigation
Nokia E72
Nokia E71
Nokia E66
Nokia N97 mini Gold Edition
Nokia N97mini
Nokia N97
Nokia N86 8MP
Nokia X6 16GB
Nokia 5800 XpressMusic
Nokia 5235 Ovi Music Unlimited
Nokia 5230
To find Ovi Maps for other phones visit Maps Support-http://www.nokia.co.in/get-support-and-software/download-software/maps-support/compatibility-and-dow...
How to install and setup GPS in nokia E-71.
Firstly Install Nokia Ovi Suite (advance version of PC Suite) in your respected computer.
http://www.nokia.co.in/get-support-and-software/download-software/nokia-ovi-suite
After installation of Nokia Ovi Suite go to following link
http://www.nokia.co.in/explore-services/ovi-maps/downloads?intc=ncomexpserv-fw-ilc-lft-con-na-ncomex...
Now install the the second link file into your phone, i.e., "nokia_maps_3.03_10wk11_b04_s60_3.1_rom.Nocs.sis".
After successful installation connect your phone with data cable in PC Suite (DON'T run PC suite application in your system) mode and open Nokia Ovi Suite application in your system.
Now in Nokia Ovi Suite application click on View-Go to-Maps (make sure your system is connected to Internet and your mobile phone key pad doesn't get locked, if keypad autolock period is on switch it off for that moment and your phone is fully charged, now in maps select Asia in that India and download that India Map (103 MB) into your phone.
Please Note that do not disconnect your phone from data cable else maps will not get downloaded and will not to be
transferred to your phone.
After successful installation of maps into your phone download "Voice Guidance Languages", which ever is preferred by you, if you really want to enjoy it. Like- English(UK)-with street names or in Hindi, Tamil, Urdu.
Now you are almost done, just take your phone into your hand,
Go to Maps then select Options-then Settings
Internet-Connection-Offline ( don't worry your GPS will work fine as data bearer is Nokia which is free of charge, so just relax).
Navigation-Drive Guidance-Select the desired Voice
Walk Guidance-Select the desired Voice or you can set it to Beeps and Vibrations (if downloaded).
Home Location- define you home location by searching in maps, this will make easier to drive back to home by simply selecting Drive Home option while using navigation.
Now go to option Map-Categories-select the categories you want to be shown on the map.
Its DONE, now search for any desired location press the selection button and then select Drive to or Walk to option and you will be connected to GPS.
Please Note as GPS needs free environment so it may not work in home and generally it takes 10-15 minutes to connect so please be patient.
Worked perfectly for me
By the way, why doesn't the maps application work if I doenload all the maps instead of only India map??

Transmission does not keep its configuration after restart

Hi everyone,
I have a problem coming up with gnome's last upgrade.
Since Gnome 3.8 then, transmission 2.77 will not keep its configuration. I've already tried to erase the ~/.config/transmission folder in order to start transmission with a "clean" configuration but its not working.
Does anyone have the same problem ? And more importantly, does anyone have a solution yet ?
Thanks

chord wrote:
Common solution for configs rewriting prevent :
chattr +i <your-config-file-name>
It blocks any changes on locked file.
If you need to rewrite/edit file, just unlock it with chattr -i, write changes and lock it again.
I don't think that's a good idea, there is probably a valid reason a config file is being overwritten, your solution would disable the actual application from changing its own config file...
I had a similar problem with the transmission daemon,
Basically this is what I have deducted:
Start transmission
It reads config file
Stop transmission
It re-writes the config file with what it first read when it started plus applying changes you may have made via a GUI.
Basically as I said earlier, if you edit transmissions config file while it is running with vim or nano or whatever, those changes will be over written when transmission stops.
The solution is to either change settings from the GUI, or make sure there is no transmission running, then edit the config file and save it. Everything should then work so long as you haven't made a syntax error when editing the config file.
Last edited by jrussell (2013-06-03 22:15:35)

Windows Does Not Remember Screen Resolution after restart

Hi Everyone,
I have a strange problem with Windows 8.1 Pro
My screen resolution resets to 800 x 600 everytime i restart my PC, and I will have to set my resolution again everytime I start my PC.
Any idea?
Cheers
Nelson

Hi Nelson,
Please check the display adapters on Device Manager.
It may be caused by your graphics driver.
I suggest you reinstall the latest graphics driver to check the result.
Regards,
Kelvin hsu
TechNet Community Support

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Connect via RDP option is not enabled for some VM's on the same Hyper-V Host

Hi. I have many virtual machines on a Hyper-V host being managed via System Center Virtual Machine Manager 2012. When you right click on a virtual machine - Connect or View - Connect via Console is enabled, but Connect via RDP is not enabled for
most but not all of the machines. Is there a setting on the Hyper-V host that I need to modify to enable Connect via RDP for all of my VM's? All of the virtual machines have the same configuration meaning that Remote Desktop is enabled for all
of them on the OS itself.

Hi Debabrata,
In App Controller the console access is provided by an ActiveX control and this requires the client (web browser) to connect directly to the Hyper-V server. As you note, for this to work over the internet would require the Hyper-V host to be accessible from
the internet, and this is not a recommended security practice.
Publishing App Controller as a Remote App avoids needing to make the Hyper-V host accessible to the internet. I'm not an expert in setting up Remote App and don't have an answer about how to avoid doing 2 lots of authentication. The
Remote Desktop Services forum is likely to be a better place to ask a question on setting up Remote Apps.
Let me know what you need help with for the Remote Console in Windows Azure Pack option. There is also a forum for
Azure Pack and two of our MVPs who do have console connect working have both written articles that describe their experience.
http://kristiannese.blogspot.com/2014/02/configuring-remote-console-for-windows.html
http://www.hyper-v.nu/archives/mvaneijk/2014/01/windows-azure-pack-remote-console-with-the-rd-gateway-in-a-dmz/
Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Mail does not connect to mail servers after 10.5.7 update

Updated Macbook Air with 10.5.7 update. The update went without problems.
After starting the computer, the Mail program does not connect to the mail servers - IMAP, POP, SMTP.
Otherwise the internet connection is OK for other programs, connection is through WIFI - Airport Extreme, Time Capsule... In all cases the same problem with Mail - showing the following
The server error encountered was: The connection to the server “mail.mac.com” on port 993 failed (error 1: Operation not permitted)
The connection doctor shows
Mail was able to connect to the internet
and for all the servers - could not connect, check your connection...
Did repair of keychain and permissions - no change in status of Mail... any ideas?

This is what shows up in console: (maybe someone who can understand this can help us!)
15.05.09 16:38:26 Mail[1478] GET /internetservices/issupport/1_27a4cv2b6061/clientConfig.plist (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:2F42C0AC-8189-4309-B914-AB3759688961, auto-retries=2, manual-retries=0
15.05.09 16:38:26 Mail[1478] GET /internetservices/issupport/1_27a4cv2b6061/clientConfig.plist (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:DD2C955C-DAD7-4CAF-BFD7-79B75F6C93E0, auto-retries=2, manual-retries=0
15.05.09 16:38:27 Mail[1478] POST /Info.woa/wa/XMLRPC/accountInfo (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:D4B63982-058D-4AF4-ADBB-CF84E9DDE8EF, auto-retries=2, manual-retries=0
15.05.09 16:39:32 Mail[1485] GET /internetservices/issupport/1_27a4cv2b6061/clientConfig.plist (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:13DE143D-0FE5-443B-834E-253082F0E448, auto-retries=2, manual-retries=0
15.05.09 16:39:32 Mail[1485] GET /internetservices/issupport/1_27a4cv2b6061/clientConfig.plist (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:EAE08B1B-6DEE-459B-8903-0E4700B3087B, auto-retries=2, manual-retries=0
15.05.09 16:39:32 Mail[1485] POST /Info.woa/wa/XMLRPC/accountInfo (FAILED), httpStatusCode:-1, errorType:100 (domain=NSPOSIXErrorDomain, code=1), transactionState:5, txnId:ABEB15F4-5650-4230-BDA8-ED1512B59443, auto-retries=2, manual-retries=0

TS3048 unable to connect to keyboard. System does not detect keyboard even after switching on and off. Mouse working fine. Earlier was working fine. Keyboard is not detectable by I mac . Tried a different keyboard same problem.

Changed batteries of keyboard -initially connected but now does not connect. Used a diffeerent keyboard -same result. Keyboard not seen in bluetooth devices.Switching on and off as well as re booting has not helped. Keyboard light continues to blink.

Hey Gautam5058,
Thanks for the question, and welcome to Apple Support Communities.
The following articles provide troubleshooting steps that may help to resolve your issue:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/TS1569
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
You may also want to try resetting your computer's PRAM and NVRAM.
To resolve this issue:
1. Turn the Apple Wireless Keyboard off.
- For an aluminum Apple Wireless Keyboard, hold the keyboard's power button for more than 3 seconds.
- For a white Apple Wireless Keyboard, turn over the keyboard, and turn the power switch to the off position.
2. Click the "Continue" button as the Setup Assistant instructs.
3. Power the Apple Wireless Keyboard back on.
4. Enter the 8-digit passkey and press Return. Important: You MUST press Return after you enter the 8 digit code.
Thanks,
Matt M.

After restarting my Mac does not connect wifi preferred

Hi Everyone!
My Mac Air does not automatically connect to desired Wi-Fi network.
I have already done:
1- I Checked my TCP/IP settings in the Network ( I did Renew DHCP lease).
2- I Removed networks from my Preferred Networks list.
3 - I Removed my stored network passwords.
4 - Restarted
5 - Joined again.
But after... When waking from sleep does not connect..
Could you help me.
Many thanks guys

there is no one fix solution to wifi problems, your issue is nothing new please refer to this link
if you haven't read it ,
https://discussions.apple.com/message/24691862#24691862

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

Azure VM does not connect via RDP after restart

Similar Messages

Maybe you are looking for