Moving and configuring

No clue how to uninstall Adobe Acrobat 9 Pro from my laptop (windows 7) and move it to my PC (windows 8). Also currently reader takes over my screen and I need to work with multiple windows open at the same time.

open acrobat 9>click help>deactivate. you can then uninstall using the windows uninstaller.
then install on your win 8 pc.
if you need the install files and if you follow all 7 steps you can dl a trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
and activate with your serial.
if you have a problem dl'g, you didn't follow all 7 steps. the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
for help resizing a windows' window, google: resize app window.

Similar Messages

PS Script to Automate NIC Teaming and Configure Static IP Address based off an Existing Physical NIC

# Retrieve IP Address and Default Gateway from static IP Assigned NIC and assign to variables.
$wmi = Get-WmiObject Win32_NetworkAdapterConfiguration -Filter "IPEnabled = True" |
Where-Object { $_.IPAddress -match '192\.' }
$IPAddress = $wmi.IpAddress[0]
$DefaultGateway = $wmi.DefaultIPGateway[0]
# Create Lbfo TEAM1, by binding “Ethernet” and “Ethernet 2” NICs.
New-NetLbfoTeam -Name TEAM1 -TeamMembers "Ethernet","Ethernet 2" -TeamingMode Lacp -LoadBalancingAlgorithm TransportPorts -Confirm:$false
# 20 second pause to allow TEAM1 to form and come online.
Start-Sleep -s 20
# Configure static IP Address, Subnet, Default Gateway, DNS Server IPs to newly formed TEAM1 interface.
New-NetIPAddress –InterfaceAlias “TEAM1” –IPAddress $IPAddress –PrefixLength 24 -DefaultGateway $DefaultGateway
Set-DnsClientServerAddress -InterfaceAlias “TEAM1” -ServerAddresses xx.xx.xx.xx, xx.xx.xx.xx
Howdy All!
I was recently presented with the challenge of automating the creation and configuration of a NIC Team on Server 2012 and Server 2012 R2.
Condition:
New Team will use static IP Address of an existing NIC (one of two physical NICs to be used in the Team). Each server has more than one NIC.
Our environment is pretty static, in the sense that all our servers use the same subnet mask and DNS server IP Addresses, so I really only had
to worry about the Static IP Address and the Default Gateway.
1. Retrieve NIC IP Address and Default Gateway:
I needed a way to query only the NIC with the correct IP Address settings and create required variables based on that query. For that, I
leveraged WMI. For example purposes, let's say the servers in your environment start with 192. and you know the source physical NIC with desired network configurations follows this scheme. This will retrieve only the network configuration information
for the NIC that has the IP Address that starts with "192." Feel free to replace 192 with whatever octet you use. you can expand the criteria by filling out additional octects... example:
Where-Object
$_.IPAddress
-match'192\.168.' } This would search for NICs with IP Addresses 192.168.xx.xx.
$wmi
= Get-WmiObject
Win32_NetworkAdapterConfiguration
-Filter "IPEnabled = True"
|
Where-Object {
$_.IPAddress
-match '192\.' }
$IPAddress
= $wmi.IpAddress[0]
$DefaultGateway
= $wmi.DefaultIPGateway[0]
2. Create Lbfo TEAM1
This is a straight forward command based off of New-NetLbfoTeam. I used "-Confirm:$false" to suppress prompts.
Our NICs are named “Ethernet” and “Ethernet 2” by default, so I was able to keep –TeamMembers as a static entry.
Also added start-sleep command to give the new Team time to build and come online before moving on to network configurations.
New-NetLbfoTeam
-Name TEAM1
-TeamMembers "Ethernet","Ethernet 2"
-TeamingMode SwitchIndependent
-LoadBalancingAlgorithm
Dynamic -Confirm:$false
# 20 second pause to allow TEAM1 to form and come online.
Start-Sleep
-s 20
3. Configure network settings for interface "TEAM1".
Now it's time to pipe the previous physical NICs configurations to the newly built team. Here is where I will leverage
the variables I created earlier.
There are two separate commands used to fully configure network settings,
New-NetIPAddress : Here is where you assign the IP Address, Subnet Mask, and Default Gateway.
Set-DnsClientServerAddress: Here is where you assign any DNS Servers. In my case, I have 2, just replace x's with your
desired DNS IP Addresses.
New-NetIPAddress
–InterfaceAlias “TEAM1”
–IPAddress $IPAddress
–PrefixLength 24
-DefaultGateway $DefaultGateway
Set-DnsClientServerAddress
-InterfaceAlias “TEAM1”
-ServerAddresses xx.xx.xx.xx, xx.xx.xx.xx
Hope this helps and cheers!

I've done this before, and because of that I've run into something you may find valuable.
Namely two challenges:
There are "n" number of adapters in the server.
Adapters with multiple ports should be labeled in order.
MS only supports making a LBFO Team out of "like speed" adapters.
To solve both of these challenges I standardized the name based on link speed for each adapter before creating hte team. Pretty simple really! FIrst I created to variables to store the 10g and 1g adapters. I went ahead and told it to skip
any "hyper-V" ports for obvious reasons, and sorted by MAC address as servers tend to put all thier onboard NICs in sequentially by MAC:
$All10GAdapters = (Get-NetAdapter |where{$_.LinkSpeed -eq "10 Gbps" -and $_.InterfaceDesription -notmatch 'Hyper-V*'}|sort-object MacAddress)
$All1GAdapters = (Get-NetAdapter |where{$_.LinkSpeed -eq "1 Gbps" -and $_.InterfaceDesription -notmatch 'Hyper-V*'}|sort-object MacAddress)
Sweet ... now that I have my adapters I can rename them into something standardized:
$i=0
$All10GAdapters | ForEach-Object {
Rename-NetAdapter -Name $_.Name -NewName "Ethernet_10g_$i"
$i++
$i = 0
$All1GAdapters | ForEach-Object {
Rename-NetAdapter -Name $_.Name -NewName "Ethernet_1g_$i"
$i++
Once that's done Now i can return to your team command but use a wildcard sense I know the standardized name!
New-NetLbfoTeam -Name TEAM1G -TeamMembers Ethernet_1g_* -TeamingMode SwitchIndependent -LoadBalancingAlgorithm Dynamic -Confirm:$false
New-NetLbfoTeam -Name TEAM10G -TeamMembers Ethernet_10g_* -TeamingMode SwitchIndependent -LoadBalancingAlgorithm Dynamic -Confirm:$false

Application Moved - and it hasn't

when I export from LR5 to edit an image in Photoshop CC, I get a box announcing:
Application Moved
The application has been moved, and its path has
changed. To update the product configuration, click
update.
Do Not Update Update
I get this message EVERY TIME (although only once per session) I invoke Photoshop from Lightroom.
Of interest is this: when I launched Photoshop before launching Lightroom in the hope it would pass the image to the open program, Lightroom gave the error message anyway and opened another Photoshop session. I didn't think you could have two sessions running parallel and independantly.
I had CS6 installed when I installed LR5. Then I installed CC. Some time later, I used Adobe's uninstaller to remove CS6.
There's only a single version of Photoshop on my Mac - in Applications.
Somewhere in the system, Lightroom is reading a parameter set that's confusing it. That's the most likely cause to one who doesn't know the internals even though I looked through all of the user and system files that I could find that appeared to be related.
Is there a file I can tweak or is there another way of resolving this annoyance?

It went away in 5.5.
I never found out the original cause (and, since it now worked, hadn’t pursued it further).
Mark
Mark R Friedman
2 Decker Rd, Ossining, NY 10562
http://mark-friedman.com
[email protected]
(914) 762-7689

Installing and configuring additional Edge Server role[2007] in AD site

Hello Guys,
We are planning to migrate our edge server to a new hardware. so my plan is to install new edge server and configure in a new hardware first and then decommisioing the old one.
Currently we have four servers deployed as below.
Edge Server - INEDGE001
HUB/CAS - INHUBCAS002 & INHUBCAS003
Mailbox - INMBOX004
Kindly provide the steps for this edge server harware migration.
~Karthick

Hi,
Based on my research, here are the steps about moving Edge server to a new hardware:
1.Capture all of your Edge Transport server configuration data
2.Shut down the existing Exchange 2007 server
3.Reset the computer account for the existing Exchange 2007 server
4.For drives that contained Exchange 2007 data, configure drive letters on the new server to map to or match the configuration of the old server.
5.Setup new Exchange 2007
6.When the Setup program has completed, install the Exchange 2007 service pack that was installed on the existing server.
7.Install any Exchange 2007 post-service pack hotfixes that were installed on the existing server.
8.Copy the ImportEdgeConfig.ps1 script to the root folder of your user profile on the server that you are restoring.
9.Validate the configuration file, and create an answer file that will provide server-specific information when the file is imported
10.Open the answer file, and modify any settings that are invalid for the server.
11.Import the Edge Transport server configuration by using the ImportEdgeConfig.ps1 script.
12.Run the EdgeSync process to replicate Active Directory information to Active Directory Application Mode (ADAM) and perform regularly scheduled synchronization.
For more detail inforamtion, you can refer to the following article:
http://technet.microsoft.com/en-us/library/bb332339(v=exchg.80).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images

Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images - and at times - videos don't load. I've increased / deleted Cache. Suggestions? Misconfig? Could it be possible my configuration from MacBook to router isn't correct?
Thanks!

JG,
Thanks for the info.
Couple of questions. I found an apple support document on this topic that opened with this line:
"AirPort Express and all AirPort Extreme base stations can use WDS. Earlier AirPort base stations can't."
If the TC is an airport extreme base station, why can't this work to extend the network? I think I misunderstand. Here is the full article:
http://support.apple.com/kb/HT2044?viewlocale=en_US
If I buy a new airport extreme, set it to wireless-n only as my main router, am I correct that my existing time capsule could be used as a bridge if plugged in upstairs?
Final question (and that should do it), could I take this old airport express, plug it in upstairs using the ethernet connection, and just create a separate wireless network to use with a different name?
I'd like to keep one network if possible but just kicking around short term solutions.
Thanks again.

Diff b/w alert Categories and configurations

Hi Experts,
Could you please help me here, what is diff b/w Alert Categories and configurations.
Ans also what is the use of Container elements in Categories.
You ans is very helpful for me.
Thanks in Advance all.
Regards,
Madhu.

Hi Madhu,
In Alert configuration alert rules are defined based on Alert Categories. So Alert Categories has defined using t code ALRTCATDEF. Container Elements fetches the appropriate dynamic message base on the container variable.
Go through the below doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&…
Regards,
Krupa

I have LabView but I do not have the Calibration and Configuration Palette,and I could not download it, how can I download it or if i cannot,can I work with the NI-DAQ Calibration_1200?

I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers

If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
Regards,
Erin

How to properly create and configure SharePoint 2013 Search service with PowerShell?

Hello Forum,
I have installed SharePoint 2013 across three tier servers:
WFE Server (Of course, SharePoint is installed here. Bsically this is just a Web server)
APP Server (Of course, SharePoint is installed here + Central Admin + Service Apps).
SQL Server
I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
script?
2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
3) How can I modify the script to specify a default Search center?
4) Apart from all the three aforementioned point - Is the script missing anything?
I would greatly appreciate your inputs - Thanks !

the only differences are where you place the components. if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
the app server. just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities.
generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers. also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
Disk for index, etc, etc), and making sure the topology works for your particular environment and needs.
if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

VCenter SRM Installation and Configuration

Hello,
We have installed and configured SRM 5.5.1 in Main site and DR site. In DR site we have two hosts and no shared storage.
Each have one vsphere replication appliance deployed and both the sites connected and we have also replicated two virtual machines successfully.
Next step we have configured protection group and recovery plan as well.
But when we test a recovery plan it gives a error "unable to access virtual machine configuration file"
Is it necessary we must have a shared storage? Can't we use local datastore on each host to power on the machines.
Regards
Karthik

Hi,
No, shared storage is not required:
Array/ vendor types
Requires same storage replication solution at both sites (eg. EMC RecoverPoint, NetApp vFiler, IBM SVC, etc)
Can support any storage solution at either end including local storage as long as it is covered by the vSphere HCL
SRM - Array Based Replication vs. vSphere Replication | VMware vSphere Blog - VMware Blogs
Michael.

Ibase and configuration error while creating a Service Contract

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

When I try to open any kind of links, the page first shows me "the document has moved" and then goes on to some advertisement page.

When I follow any kind of links or try to open something in another window or new tab, the browser first shows the white page with text "the document has moved", and then moves to advertisement page of some sort. Usually in the small box where the page description is it says "Jump". I don't know how to disable it, it is really irritating.

Sounds like Malware.
Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

EIS Installation and Configuration

Hi Everybody,
I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
But I have no idea how to configure(Creating DSN Catalog) in EIS.
I am using Oracle 10g. Can any one please help me on thsi installation.
Already I gone through the installation document but I didn't understand how to configure.
If anyone having installation and Configuring Screen shots please send me to my mail
Mail Id: [email protected]
This is very urgent I need to give presentation on the EIS
Thanks in Advance for your help
Awaiting for your quick Response

I'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.

How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Help please?

How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Since I purchased my three Apple TV. I have had no need to download any of my movies to my Mac. Which has been great. However, I remember that I used to now have to do this... or did I? I am just frustrated because I want to stream all this stuff vice haveing to waiting for it all to download fill up my Mac's HD and then just delete. Someone help please?

Play the movie in iTunes to stream it.
Click the cloud icon to download it.

I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me!

I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me! I have a macbook pro and iphone 5

lewbobber wrote:
Basically i need to either take it to a shop that can unlock i.e. £40.00
Be aware, you go that route & every time you try to update or restore, it will error out, leaving your phone unusable. Not to mention, you void all warranty/support.
Sell it & use the proceeds towards an officially unlocked iPhone bought directly from Apple.
Good luck.

Moving and configuring

Similar Messages

Maybe you are looking for