Installing and configuring additional Edge Server role[2007] in AD site

Hello Guys,
We are planning to migrate our edge server to a new hardware. so my plan is to install new edge server and configure in a new hardware first and then decommisioing the old one.
Currently we have four servers deployed as below.
Edge Server - INEDGE001
HUB/CAS - INHUBCAS002 & INHUBCAS003
Mailbox - INMBOX004
Kindly provide the steps for this edge server harware migration.
~Karthick

Hi,
Based on my research, here are the steps about moving Edge server to a new hardware:
1.Capture all of your Edge Transport server configuration data
2.Shut down the existing Exchange 2007 server
3.Reset the computer account for the existing Exchange 2007 server
4.For drives that contained Exchange 2007 data, configure drive letters on the new server to map to or match the configuration of the old server.
5.Setup new Exchange 2007
6.When the Setup program has completed, install the Exchange 2007 service pack that was installed on the existing server.
7.Install any Exchange 2007 post-service pack hotfixes that were installed on the existing server.
8.Copy the ImportEdgeConfig.ps1 script to the root folder of your user profile on the server that you are restoring.
9.Validate the configuration file, and create an answer file that will provide server-specific information when the file is imported
10.Open the answer file, and modify any settings that are invalid for the server.
11.Import the Edge Transport server configuration by using the ImportEdgeConfig.ps1 script.
12.Run the EdgeSync process to replicate Active Directory information to Active Directory Application Mode (ADAM) and perform regularly scheduled synchronization.
For more detail inforamtion, you can refer to the following article:
http://technet.microsoft.com/en-us/library/bb332339(v=exchg.80).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Similar Messages

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

Hi,
Edge role is design for perimeter networks, to keep security risks minimum. So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
Thanks.
MachPanel - Premium Cloud Automation Solution

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to install and configure NI Visa Server without having to install MAX?

Hi,
I need to install NI Visa Server on a computer so that remote systems can connect to the devices connected to it. However, the flash-drive on the computer is marked as "removable media" by the operating system which is causing the MAX installer to error out (this is a known problem with standard windows installers and removable media).
Before pursuing a hardware change, I was wondering if there was a way to install and configure NI Visa Server on the embedded computer without having to install or configure through MAX?
Thanks in advance for any help.

Hello!
Your system should appear under remote systems and then you can right click on the software folder and install software. Our 8145s for instance have compact flash drives and this process works. Could you give me more details on your hardware? Are you getting an error message when you try to install the software?
Allan S.

Installing and configuring microsoft sharepoint server 2013

Could you please advise where can I get this book "installing and configuring microsoft sharepoint server 2013"? Thanks for your help.

There is a free ebook here:
http://www.microsoft.com/en-us/download/details.aspx?id=30384
It's also the title of a section of technet but that's not available in printed format as far as i know.
http://technet.microsoft.com/en-us/library/cc262957.aspx

How to install and configure a boradcasting server ?

I want to install and configure a broadcasting service.
- Where can I find the service (software) ?
- What kind OS is needed ?
- is it possible to install on a PC ?
- docs ???
Please Help needed
Kind regards

HI Michel Hellmann ,
Please check:
[Information Broadcasting Part 1 u2013 System Parameter Setting|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-1-system.html]
[Information Broadcasting-Part 2 -System Settings|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-2-system.html]
[Information Broadcasting Part 3 u2013 Scheduling the First Report|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-3.html]
[How To... Troubleshoot Information Broadcasting (BEx Workbooks)|http://sapbwneelam.blogspot.com/2008/09/how-to-troubleshoot-information.html]
Hope it Helps
Srini

Step by Step of how to Install and configure the Web Server Core 2008 R2

I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Hi MASNSN,
Thanks for your sharing =)

How does WSUS work when an SCCM 2012 R2 server is newly installed? Should WSUS be installed and configured on same server?

Let me clarify.
We had a functional WSUS server delivering our updates to ours workstations. The location of the WSUS server was pushed out by Group policies.
Later, an SCCM 2012 R2 installation was installed. The original WSUS server was removed. Now WSUS type services appear to be broken.
I tried to start WSUS on the SCCM 2012 R2 server and it does not start. (I assume its not configured).
I want to get WSUS running again but am not sure how to do this safely in conjunction with our SCCM 2012 R2 installation. Do I just reinstall WSUS on the SCCM server and configure? Or is there other preferred methods?
I was not involved in SCCM's installation, so I do not know what was done.
Geoff.

Update functionality is provided via the Software Update Point
https://technet.microsoft.com/en-us/library/gg712312.aspx
... which requires WSUS to be installed - it basically takes control of WSUS.
Any existing group policies defining WSUS servers should be removed so that the SCCM client (which I assume is installed on computers already) can configure accordingly. Otherwise you will have group policy and SCCM client over writing one another to configure
the update server

Possible to install and configure adobe media server with existing apache

Hi All,
I am wondering if you know whether or not there would be an issue installing AMS Pro on a server that is already running a Moodle installation (2.4) with Apache 2.2?
If I opt to install AMS without installing apache, can I manually configure the exiting apache to enable iOS support, etc?
Any information is most appreciated!
Cheers,
G

You better post this question in the correct forum: Adobe Media Server maybe the moderator can move it.

Installing and Configuring Oracle WebLogic Server 11g

Hi, I have a question about the installation of Oracle WebLogic Server 11g (10.3.5) high availability, there is some documentation of best practices on this issue.
Thanks

http://download.oracle.com/docs/cd/E21764_01/web.1111/e13709/toc.htm

Install and configuration on the SharePoint server 2007 issue

Hi All,
           I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
          I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
Please check the Edited install.bat file and error log.
Install.bat
set _my_datetime=%date% %time%
@echo on
echo Begin Installation at %_my_datetime%
echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
@echo off
@SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
@SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
@SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
@SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
@SET SITEURL="http://sharepoint7:80/sites/DCADC"
@SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
REM      cd $(ProjectDir)
%GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
pushd %TEMPLATEDIR%\features
      Echo Deactivating LiveCycle Connector feature with WSS
      %STSADM% -o deactivatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
      Echo Deactivating LiveCycle Workflow feature with WSS
      %STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
      Echo Uninstalling LiveCycle Connector with WSS
      %STSADM% -o uninstallfeature -filename LiveCycle\feature.xml -force
      Echo Uninstalling LiveCycle Workflow with WSS
      %STSADM% -o uninstallfeature -name LiveCycle/Workflow -force
popd
      Echo Copying source files to WSS \TEMPLATE directory
      xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
      Echo Copying Feature Resource files to WSS 12\Resources directory
      xcopy Resources %RESOURCESDIR% /e /y /i
      Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
      xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
pushd %TEMPLATEDIR%\features
      Echo Installing LiveCycle Connector with WSS
      %STSADM% -o installfeature -filename LiveCycle\feature.xml -force
      Echo Installing LiveCycle Workflow with WSS
      %STSADM% -o installfeature -name LiveCycle/Workflow -force
      Echo Activating LiveCycle Connector with WSS
      %STSADM% -o activatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
      Echo Activating LiveCycle Workflow with WSS
      %STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
popd
      Echo Restarting IIS worker process
      IISRESET
set _my_datetime=%date% %time%
@echo on
echo End Installation at %_my_datetime%
@echo off
Error Log
E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27
Begin Installation at Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
"Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Deactivating LiveCycle Connector feature with WSS
Operation completed successfully.
Deactivating LiveCycle Workflow feature with WSS
Operation completed successfully.
Uninstalling LiveCycle Connector with WSS
Operation completed successfully.
Uninstalling LiveCycle Workflow with WSS
Operation completed successfully.
Copying source files to WSS \TEMPLATE directory
TEMPLATE\FEATURES\LiveCycle\Elements.xml
TEMPLATE\FEATURES\LiveCycle\Feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
TEMPLATE\IMAGES\LiveCycle\createPdf.png
TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
16 File(s) copied
Copying Feature Resource files to WSS 12\Resources directory
Resources\AdobeLiveCycleConnectorCore.de-DE.resx
Resources\AdobeLiveCycleConnectorCore.de.resx
Resources\AdobeLiveCycleConnectorCore.en-US.resx
Resources\AdobeLiveCycleConnectorCore.en.resx
Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
Resources\AdobeLiveCycleConnectorCore.fr.resx
Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
Resources\AdobeLiveCycleConnectorCore.ja.resx
Resources\AdobeLiveCycleConnectorCore.resx
9 File(s) copied
Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
App_GlobalResources\AdobeLiveCycleConnector.de.resx
App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
App_GlobalResources\AdobeLiveCycleConnector.en.resx
App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
App_GlobalResources\AdobeLiveCycleConnector.fr.resx
App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
App_GlobalResources\AdobeLiveCycleConnector.ja.resx
App_GlobalResources\AdobeLiveCycleConnector.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
App_GlobalResources\AdobeLiveCycleWorkflow.resx
18 File(s) copied
Installing LiveCycle Connector with WSS
Operation completed successfully.
Installing LiveCycle Workflow with WSS
Operation completed successfully.
Activating LiveCycle Connector with WSS
Operation completed successfully.
Activating LiveCycle Workflow with WSS
Operation completed successfully.
Restarting IIS worker process
Attempting stop...
Internet services successfully stopped
Attempting start...
Internet services successfully restarted
E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29
End Installation at Wed 08/22/2012 14:41:00.29
Waiting...
Regards,
Amol Sahare

This might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

How to install and configure configure IGS for J2EE server 700

Hi,
Please help me in installing and configuring IGS for J2EE server700 as i need it to run Business Graphics for my Web DynPro application. Earlier i had installed J2EE server 640 and i didnt have to do any separate installation for IGS. I just had to configure the IGS URL from Visual Admin. But i can't find any igswd.exe running on my J2EE700 engine.
Please let me know the procedure for this.
Thanks an Regards,
Smriti.

Hi,
Check the below link,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/17/86c039c7811f11e10000000a114084/frameset.htm">About IGS Configuration and Adminisatration</a>
Regards,
Suresh.T

Install and configure Tomcat post-Crystal Reports Server implementation?

Scenario - have Crystal Reports Server 2008 V1 already installed using WACS and IIS. Everything runs great. Want to add in SAP Crystal Dashboard Design. Looking through the documentation for Dashboard Design tells me I need to:
1. Install SAP BusinessObjects Enterprise or Crystal Reports Server.
2. Install SAP BusinessObjects Xcelsius Enterprise 2008.
3. Install Live Office.
4. Install SAP BusinessObjects Web Services.
5. Add the Live Office keycode to the Central Management Console
Made it past 3 and am hung up on 4. According to documentation for Unified Web Services, it looks like I need Tomcat installed, but Crystal Reports Server doesn't offer an expand installation option. There also doesn't seem to be any good documentation included with SAP Crystal Dashboard Design on installing web services - if it's required, why isn't it included and where can I find the documentation (assuming it's different than the Unified Web Services Administrator's Guide I found).
It seems odd that a customer who might want to purchase an add-on for their Crystal Reports Server implementation wouldn't be able to easily add to their product..
1) Can I install web services to Crystal Reports Server using just the WACS or is Tomcat required? The admin guide indicates WACS is not supported for apps that use web services, like Live Office. Is that an absolute?
2) If Tomcat is required, can I install and configure it for an existing Crystal Reports Server 2008 V1 implementation?
3) If i can install Tomcat on a server with an existing Crystal Reports Server 2008 V1 implementation, is there a specific guide to doing so?

Hi Colin,
What is the exact version of BO/Crystal Enterprise.
If it is BOXI R2 then follow below mentioned steps.
To manually install the ActiveX Viewer on the client computer:
1. Copy the ActiveXViewer.cab file from the server to the client computer, and extract its contents to a temporary folder.
2. Move the files Crviewer.dll, Crviewer9.dll, Sviewhlp.dll, and Swebrs.dll to the System32 folder. Keep this folder visible.
3. On the Start menu, click Run. The Run dialog box appears.
4. In the Open box, type "regsvr32" and then drag and drop the Crviewer.dll file icon from the System32 folder onto the Run dialog box.
5 Click OK.
Repeat steps 3 and 4 for the files Sviewhlp.dll, and Swebrs.dll.
You may still be prompted by the browser, choose more options and never install to avoid being prompted. The viewer should work after that.
Thanks,
Purna.

Installing and configuring additional Edge Server role[2007] in AD site

Similar Messages

Maybe you are looking for