Moving data to archive cube

Hi Experts,
We are extracting data from R/3 to BW.We are keeping 2years of Data in DSO1 and moving into Cube(R/3>DSO1>Cube1).we have 2007 and 2008 data in the DSO and Cube.We extracted 1999 to 2006 data in to History DSO  from R/3 and sent into InfoCube(Cube2).The flow as is follows
Current Data:2007 and 2008
R/3 -
>DSO1--->Cube 1(Deltas are running)
History data:1996 to 2006
R/3>DSO2--->Cube2.
Now I want to move 2007 data in to History data(History DSO and Cube).
I have two options to get this job  done .
1.Move selective data from DSO1 to DSO2 and from DSO2 to Cube 2.
2.Move selective data from Cube 1 to Cube 2.If So I can't see item wise data just I can see only Aggregated data in the cube.
Is there any best approach other than two options.if not what would be the best between two options.
Once I move the data into History cube I need to delete the data in Current DSO and Current Cube based on selective deletion.If I delete the data in DSO and Cube is there any impact on currrent Delta load.
I need to do this every year becuase we want to keep only 2years of data in current data InfoCube..Could any one throw some light on the above issue.
Thansks,
Rani.

Hi Rani.........
Ur 1st Question....
We are extracting data from R/3 to BW.We are keeping 2years of Data in DSO1 and moving into Cube(R/3>DSO1>Cube1).we have 2007 and 2008 data in the DSO and Cube.We extracted 1999 to 2006 data in to History DSO from R/3 and sent into InfoCube(Cube2).The flow as is follows
Current Data:2007 and 2008
R/3 -
>DSO1--->Cube 1(Deltas are running)
History data:1996 to 2006
R/3>DSO2--->Cube2.
Now I want to move 2007 data in to History data(History DSO and Cube).
I have two options to get this job done .
1.Move selective data from DSO1 to DSO2 and from DSO2 to Cube 2.
2.Move selective data from Cube 1 to Cube 2.If So I can't see item wise data just I can see only Aggregated data in the cube.
Is there any best approach other than two options.if not what would be the best between two options.
ANS I want to clear u one thing.....that in infocube data will not get Aggregated until u aggregate the Cube.........So u can see the data in cube item wise if u don't aggregate the cube.......
Anyways...I think the best option is to follow the Flow.....Move selective data from DSO1 to DSO2 and from DSO2 to Cube 2..........
Secondly..U hav asked...
Once I move the data into History cube I need to delete the data in Current DSO and Current Cube based on selective deletion.If I delete the data in DSO and Cube is there any impact on currrent Delta load.
I need to do this every year becuase we want to keep only 2years of data in current data InfoCube..Could any one throw some light on the above issue....
ANS Selective deletion of data is not going to effect delta loads...so u can do Selective deletion...
Actually Delta load will get effected....somehow if anyone delete a delta request without making the QM status red.......then init flag will not be set back....and data will be lost...
Hope this helps..
Regards,
Debjnai...

Similar Messages

  • Best way to extract data from archived cube

    Hello Experts,
    Can anyone tell me best way to extract data from archived cube.
    Basically I am trying to pull all the data from archived cube and then load it into another brand new infoprovider which is in different box.
    Also I need to extract all the master data for all infoobjects.
    I have two options in my mind:
    1) Use open hub destination
    or
    2) Infoprovider>display data>select the fields and download the data.
    Is it really possible to extract data using option (2) if records are too high and then load it into another infoprovider in new system.
    Please suggest me the pros and cons for the two options.
    Thanks for your time in advance.

    Hello Reddy,
    Thanks a lot for your quick reply.
    Actually in my case I am trying to extract archived infocube data and then load it into new infoprovider which is in different system. If I have connectivity I can simply export data source from archived infocube and then reload into new infoprovider.
    But there is no connectivity between those two systems (where archived cube is and new infoprovider) and so I am left with the two options I mentioned.
    1) Use Open Hub
    or
    2) Extract data manually from infoprovider into excel.
    Can anyone let me know which of the two options is the best and also I doubt on how to use excel in extracting data as excel have limit of no.of records 65536
    Thanks
    Edited by: saptrain on Mar 12, 2010 6:13 AM

  • Moving data from DSO to cube

    Experts,
    We are in a situation where we might have to move data from cube to DSO. We doing POC and finding that even if DSO is set to overwrite, the data is summing up for same billing document. I would like to know:
    1) is there any o

    Hi,
    As the data in the cube is already in additive mode, if you get the data to a DSO in overwrtite mode, you will get an incorrect data.
    So in order to get the correct data,, it is always best to keep the DSO id additive mode.
    e.g
    Request ID Customer Quantity
    20               1000          15
    21               1000          10
    in this situation you would want to report
    Customer Quantity
    1000          25
    an ODS with overwrite mode, without the request ID as a KEY would give
    Customer Quantity
    1000          10
    an ODS with overwrite mode, with the request ID as a KEY would give
    Customer Quantity
    1000          25
    an ODS with additive mode, with/without the request ID as a KEY would give
    Customer Quantity
    1000          25
    Hope this helps
    -Vikram

  • Move data from one cube to another cube

    Hi,
    I am on BW 3.5 and I have moved the data from one cube to another cube and found that the number of records in the original cube does not match to the newly created cube. for eg. if the original cube contains 8,549 records then the back up cube contains 7,379 records.
    Please help me on what I need to look on and if in case the records are getting aggregated then how do I check the aggregating record.
    Regards,
    Tyson

    Dear tyson m ,
    check with any update rules in ur transfer.If so check in it.
    Just go through these methods for making transfer from one cube to another cube fully without missing data.
    Update rules method
    if it's updated from ods, you can create update rules for cube2 and update from ods
    or you can try datamart scenario
    cube1 right click 'generate export datasource'
    create update rules for cube2, assign with cube1
    rsa1->source system->bw myself, right click 'replicate datasource'
    rsa1-> infosource -> search 8cube1 name
    (if not get, try right click root note 'infosource'->insert lost node(s)
    from that infosource, you will find assigned with datasource, right click and 'create infopackage', schedule and run.
    Copy from
    While creating the new cube give the cube name in the "Copy from" section. It would copy all the characteristics and Key figures. It would even copy the dimensions and Navigational attributes
    Another option is:
    The steps for copying the contents of one cube to another:
    1. Go to Manage -> Recontruct of the new cube.
    2. Select the "selection button"(red , yellow, blue diamond button).
    3.In the selection screen you can give the technical name of the old cube, requests ids you want to load, from & to date.
    4.Execute and the new cube would be loaded.
    Its all that easy!!!!!!
    Refer this link:
    Copying the structure of an Infocube
    Reward if helpful,
    Regards
    Bala

  • Data movement between cubes.

    hi experts,
    Am facing problem while moving data from two different cubes in to another cube. Am able to map all the fields but while executing it is giving some process error.. Please let me know how to do this...
    with regards,
    Latha Shree

    Inorder to load into an infocube from 2 other cubes, create a transformation between final cube & first cube(frm where you are extracting data) with, first cube as the source & final cube as the target. Map respective fields and activate the transformation. Then create DTP and activate it.
    similarly, create one more Transformation betwn second nd final cube and DTP and activate it.
    Then execute the two DTPs which will load the data from first and second cubes in to the final cube..
    U can also refer the following link for more info...
    BI to BPC Mapping

  • Wish to keep always 2 years of data on the cube

    Hi Experts,
                 we wish to keep always 2 years of data on the cube and archive the data after it is 2 years old.
    Any thought on this is appreciated.
    Thanks,
    Varun.

    hi Varun,
    you can use tcode SARA and 0calyear as selection to archive the cube to flat file or another cube,
    for more detail please follow this how to archive in bw doc
    https://websmp108.sap-ag.de/~sapdownload/011000358700000085572002E/HowToArchiveinBW.doc
    hope this helps.

  • How extract data from bw cube to MS SQL server.

    Hi all,
           This is Sateesh.In my requirement, i need to extract date from  BW Cube and to be moved to MS SQL server.can any one give  the slution .Pls give me the process how to move from bw to sql server.

    HI Kumar,
                       Try with Open Hub.........
    Check these.....
    http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c5/03853c01c89d7ce10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/59/90070982d5524b931ae16d613ac04a/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f92595-0501-0010-5eb5-bb772d41ffa4
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
    http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/frameset.htm
    /people/happy.tony/blog/2006/09/18/hyperion-essbase-data-extraction-transformation-and-loading
    /people/marc.bernard/blog/2005/07/11/reorganization-of-sap-business-intelligence-forums
    Using OpenHub Unix to export to SQL Server
    Infospoke
    HOW TO RETRACT DATA FROM BPS 7.1 TO SRM 5.0
    Regards,
    Vijay.

  • Could not see the data in the cube

    Hi all,
    Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
    I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new)  which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
    Can anyone plz help me out.
    Thanks in advance.
    Thanks,
    Preethi.

    Hi Balu,
    I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
    I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
    Hope its clear.
    Thanks,
    Preethi.

  • Input ready query is not showing loaded data in the cube

    Dear Experts,
    In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
    Thanks,
    Gopi R

    Hi,
    input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
    In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
    1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
    2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
    If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
    Regards,
    Gregor

  • Can not find data in virtual cube

    Experts,
    I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
    Can anybody tell me what could be the reasons the data is coming through Virtua cube.
    Thanks,
    AK

    Hi,
    i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
    regards
    Siggi

  • Can't view my Cube and Dimension Data with the Cube Viewer

    I'm new in using OWB, i'm using Oracle 10g release1 with OWB R2 also Oracle WorkFlow 2.6.3.
    When studying with the steps from the OTN pages (start01, flat-file02, relational-wh-03, etl-mappings, deployingobjects, loading-warehouse and bi-modeling)
    the loading was success, i guess...
    But when I want to see the data in the cube and dimension, an error occurs.
    It says
    " CubeDV_OLAPSchemaConnectionException_ENT_06952??
    CubeDV_OLAPSchemaConnectionException_ENT_06952??
         at oracle.wh.ui.owbcommon.dataviewer.dimensional.DataViewerConnection.connect(DataViewerConnection.java:115)
         at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.BIBeansConnect(DimDataViewerMain.java:433)
         at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.init(DimDataViewerMain.java:202)
         at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:68)
         at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
         at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
         at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
         at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
         at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
         at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
         at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
         at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) "
    Can somebody explain what is happening, I really don't understand, when the cube viewer window appears, there's no data in it....
    I realy need help with this...

    I'm new in using OWB, i'm using Oracle 10g release1 with OWB R2 also Oracle WorkFlow 2.6.3.
    When studying with the steps from the OTN pages (start01, flat-file02, relational-wh-03, etl-mappings, deployingobjects, loading-warehouse and bi-modeling)
    the loading was success, i guess...
    But when I want to see the data in the cube and dimension, an error occurs.
    It says
    " CubeDV_OLAPSchemaConnectionException_ENT_06952??
    CubeDV_OLAPSchemaConnectionException_ENT_06952??
    at oracle.wh.ui.owbcommon.dataviewer.dimensional.DataViewerConnection.connect(DataViewerConnection.java:115)
    at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.BIBeansConnect(DimDataViewerMain.java:433)
    at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.init(DimDataViewerMain.java:202)
    at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:68)
    at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
    at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
    at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
    at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
    at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
    at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
    at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
    at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
    at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) "
    Can somebody explain what is happening, I really don't understand, when the cube viewer window appears, there's no data in it....
    I realy need help with this...

  • To load data from a cube in SCM(APO) system to a cube in BI system.

    Experts,
         Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
    Thanks,
    Meera

    Hi,
    Think in this way,
    To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO,  then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
    Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
    Thanks
    Reddy

  • How to load data to a cube from multiple infosources ?

    Hi friends,
    How to load data to a cube from multiple infosources ? could u please answer this question .
    thanks in advance......

    Hi ,
    say for example you need to load data to 1 cube from 3 info sources:
    1) You need to create 3 update rules for the Cube.
    2) Each time you create the update rules. Mention the name the name of the Info source. and create update rules correspondingly.
    Regards
    satish
    Message was edited by:
            satish murthy

  • How to create a report in bex based on last data loaded in cube?

    I have to create a query with predefined filter based upon "Latest SAP date" i.e. user only want to see the very latest situation from the last load. The report should only show the latest inventory stock situation from the last load. As I'm new to Bex not able to find the way how to achieve this. Is there any time characteristic which hold the last update date of a cube? Please help and suggest how to achieve the same.
    Thanks in advance.

    Hi Rajesh.
    Thnx fr ur suggestion.
    My requirement is little different. I build the query based upon a multiprovider. And I want to see the latest record in the report based upon only the latest date(not sys date) when data load to the cube last. This date (when the cube last loaded with the data) is not populating from any data source. I guess I have to add "0TCT_VC11" cube to my multiprovider to fetch the date when my cube is last loaded with data. Please correct me if I'm wrong.
    Thanx in advance.

  • Data Request on Cube

    Hi All
    I'm new to IP.
    I've created aggregation level on info cube then created a input ready query on the cube and I've saved the data on Cube.It's working fine but the data request on cube still stays with yellow.
    What's the settings to be done to get yellow request to green.
    Regards,
    Charan.

    For IP and BPS, the status remains yellow only.

Maybe you are looking for