Moving ESX hosts to a new cluster?

I have 6 ESX 3.5.0 systems currently divided into three 2-node clusters.
Cluster 1 is HP DL380 G6 with Xeon E5540 CPU's and is not licensed for vMotion
Cluster 2 is HP DL380 G7 with Xeon X5650 CPU's and is licensed for vMotion
Cluster 3 if HP DL380 G6 with Xeon E5520 CPU's and is licensed for vMotion
All nodes are live and in production. Recently while enabling hyperthreading on nodes of cluster 2, the manual failovers didn't go well and we had a lot of downtime while systems fought for resources. HA has admission control enabled and 1 host failover capacity so I'm not sure why we had such extreme problems. Based on that issue, I'd like to create a larger cluster if possible but that brings a series of questions:
1) What nodes are hardware compatible to create a larger cluster? It looks like the nodes from 1 and 3 can be combined into one four node cluster but the CPU's are too different in cluster 2 to join them. Is that correct?
2) What implications are there of moving nodes to a new cluster? These are running VM's in a production environment, unplanned downtime is not tolerated (but planned is usually OK). It looks like I can just put a node into maintenance mode, remove it from a cluster, and then re-add it to a new cluster? If I license the nodes on cluster 1 for vMotion before this work, can that be done with no guest downtime?
Any gotcha's?
Everything is scheduled to be replaced later this year (new servers, VMware, and SAN) but with the failovers not working smoothly on cluster 2, I'd like to get this fixed as much as possible as soon as possible, with of course as little cash outlay as possible.
Thanks for any insight you can provide!

Hi,
As you have new servers I recommend you :
- Install OEL 5 on these new server ( OEL 6 is not supported)
- Install Oracle Clusterware 11.2.0.3
- Install Oracle Database 11.1.0.7
- Configure temporary Virtual IP (at moment of migration you can reconfigure these Virtual IP with same used on old cluster)
- Create a New Database with same name from actual PROD env using DBCA
- Configure Services and Network
- So remove only database files (Spfile, Control, Datafiles, Online Logs) from this new database created
At moment of Migration of Servers:
- Shutdown the Old Cluster
- Configure the Virtual IP of old cluster on new Cluster / Also you will need reconfigure Listeners and Tnsnames.ora
- Map the Luns of Database Files on new Cluster and mount your filesystem
- Start Database and all depend resources.
I recommend you use Grid Infrastructure (clusterware) 11.2 because if you in the future want upgrade your database to 11.2, you will need only install a Oracle RAC 11.2 and Upgrade your Database from 11.1.
If you install Clusterware 11.1 you will need upgrade both (Clusterware and RAC). It is much more work and you can find much more trouble to UPGRADE Clusterware, than performing a fresh installation.
Oracle Clusterware 11.2 Support (Oracle RAC 9i/10g/11g)
Any problem during these step at moment of migration you will have the old cluster.
Open an SR in the MoS to validate this new structure and migration.(This will help with possible problems that may occur)
Regards,
Levi Pereira
Edited by: Levi Pereira on Jan 25, 2012 1:09 PM

Similar Messages

Unable to create a new cluster on our domain

Hi there,
I am having difficulties creating a new server 2012 R2 failover cluster in our domain. We have a working 2008 R2 cluster that has been running fine for years now.
I have tried on different hardward with single nodes and multiple nodes when making the cluster. I can see the new cluster account is created in AD and I have triple checked all permissions required to create the cluster. The resulting errors
are:
Adding special permissions to the computer object failed. Trying to add 'Full-Access' permissions for security principal S-1-5-21-2379181152-2103701998-3253613930-1309 to computer object CN=VM-CLUSTER-1,OU=Servers,DC=HHS,DC=local failed. Verify that the
user running create cluster has permissions to update the computer object in Active Directory Domain Services. The parameter is incorrect.
An error occurred while creating the cluster and the nodes will be cleaned up. Please wait...
There was an error cleaning up the cluster nodes. Use Clear-ClusterNode to manually clean up the nodes.
An error occurred while creating the cluster.
The parameter is incorrect
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Any suggestions on what could be causing this? My only current route of investigation is a currently missing domain controller account in AD as I assume this must be AD related.

Failover Cluster Validation Report
Node:
Node-4.HHS.local
Validated
Started
04/03/2014 09:05:31
Completed
04/03/2014 09:05:53
The Validate a Configuration Wizard must be run after any change is made to the configuration of the cluster or hardware. For more information, see
http://go.microsoft.com/fwlink/p/?LinkId=280145.
Results by Category
Name
Result Summary
Description
Hyper-V Configuration
<result></result>
<description>Success</description>
Inventory
<result></result>
<description>Success</description>
Network
<result></result>
<description>Warning</description>
Storage
<result></result>
<description>Warning</description>
System Configuration
<result></result>
<description>Warning</description>
Hyper-V Configuration
Name
Result
Description
<id>List Information About Servers Running Hyper-V</id>
<result></result>
<description>Success</description>
<id>Validate Compatibility of Virtual Fibre Channel SANs for Hyper-V</id>
<result></result>
<description>Success</description>
<id>Validate Hyper-V Memory Resource Pool Compatibility</id>
<result></result>
<description>Success</description>
<id>Validate Hyper-V Network Resource Pool And Virtual Switch Compatibility</id>
<result></result>
<description>Success</description>
<id>Validate Hyper-V Processor Resource Pool Compatibility</id>
<result></result>
<description>Success</description>
<id>Validate Hyper-V Role Installed</id>
<result></result>
<description>Success</description>
<id>Validate Hyper-V Storage Resource Pool Compatibility</id>
<result></result>
<description>Success</description>
<id>Validate Matching Processor Manufacturers</id>
<result></result>
<description>Success</description>
Inventory
Name
Result
Description
<id>List BIOS Information</id>
<result></result>
<description>Success</description>
<id>List Environment Variables</id>
<result></result>
<description>Success</description>
<id>List Fibre Channel Host Bus Adapters</id>
<result></result>
<description>Success</description>
<id>List iSCSI Host Bus Adapters</id>
<result></result>
<description>Success</description>
<id>List Memory Information</id>
<result></result>
<description>Success</description>
<id>List Operating System Information</id>
<result></result>
<description>Success</description>
<id>List Plug and Play Devices</id>
<result></result>
<description>Success</description>
<id>List Running Processes</id>
<result></result>
<description>Success</description>
<id>List SAS Host Bus Adapters</id>
<result></result>
<description>Success</description>
<id>List Services Information</id>
<result></result>
<description>Success</description>
<id>List Software Updates</id>
<result></result>
<description>Success</description>
<id>List System Drivers</id>
<result></result>
<description>Success</description>
<id>List System Information</id>
<result></result>
<description>Success</description>
<id>List Unsigned Drivers</id>
<result></result>
<description>Success</description>
Network
Name
Result
Description
<id>List Network Binding Order</id>
<result></result>
<description>Success</description>
<id>Validate Cluster Network Configuration</id>
<result></result>
<description>Success</description>
<id>Validate IP Configuration</id>
<result></result>
<description>Success</description>
<id>Validate Network Communication</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Windows Firewall Configuration</id>
<result></result>
<description>Success</description>
Storage
Name
Result
Description
<id>List Disks</id>
<result></result>
<description>Success</description>
<id>List Disks To Be Validated</id>
<result></result>
<description>Not Applicable</description>
<id>Validate CSV Network Bindings</id>
<result></result>
<description>Not Applicable</description>
<id>Validate CSV Settings</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Disk Access Latency</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Disk Arbitration</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Disk Failover</id>
<result></result>
<description>Not Applicable</description>
<id>Validate File System</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Microsoft MPIO-based disks</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Multiple Arbitration</id>
<result></result>
<description>Not Applicable</description>
<id>Validate SCSI device Vital Product Data (VPD)</id>
<result></result>
<description>Not Applicable</description>
<id>Validate SCSI-3 Persistent Reservation</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Simultaneous Failover</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Storage Spaces Persistent Reservation</id>
<result></result>
<description>Not Applicable</description>
System Configuration
Name
Result
Description
<id>Validate Active Directory Configuration</id>
<result></result>
<description>Success</description>
<id>Validate All Drivers Signed</id>
<result></result>
<description>Success</description>
<id>Validate Memory Dump Settings</id>
<result></result>
<description>Success</description>
<id>Validate Operating System Edition</id>
<result></result>
<description>Success</description>
<id>Validate Operating System Installation Option</id>
<result></result>
<description>Success</description>
<id>Validate Operating System Version</id>
<result></result>
<description>Success</description>
<id>Validate Required Services</id>
<result></result>
<description>Success</description>
<id>Validate Same Processor Architecture</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Service Pack Levels</id>
<result></result>
<description>Not Applicable</description>
<id>Validate Software Update Levels</id>
<result></result>
<description>Not Applicable</description>
Overall Result
Testing has completed successfully and the configuration is suitable for clustering.

New-Cluster Report file location

Hi All,
I’m creating a cluster with new-cluster cmdlet and I need this to be a silent run.
New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
*>&1 |
Out-Null
But I can’t get around the following output: Report file location: C:\Windows\cluster\Reports\Create Cluster Wizard <servername> on 2015.04.07 At 13.32.33.mht
I have tried it with:
$WarningPreference
= "SilentlyContinue"$VerbosePreference
= "SilentlyContinue"$DebugPreference
= "SilentlyContinue"$ProgressPreference
= "SilentlyContinue"
$leeg
= New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
*>&1 |
Out-Null
$leeg
= New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
-verbose:$False
-Debug:$False
-OutVariable out
-WarningAction SilentlyContinue
-WarningVariable wout
| Out-Null
But I keep getting the following output on screen:
Report file location: C:\Windows\cluster\Reports\Create Cluster Wizard <servername> on 2015.04.07 At 13.32.33.mht
Best regards,
Chris

Hi Chris,
this is due to non-conformance with PowerShell best practices by the coder of the FailoverCluster-Module developer.
New-Cluster writes directly to the host and thus can't be suppressed this way.
You may have more luck handling this odd output by running this command within a job or runspace.
Cheers,
Fred
There's no place like 127.0.0.1

Can a Nexus 1000v be configured to NOT do local switching in an ESX host?

Before the big YES, use an external Nexus switch and use VN-Tag. The question is when there is a 3120 in a blade chassis that connects to the ESX hosts that have a 1000v installed on the ESX host. So, first hop outside the ESX host is not a Nexus box.
Looking for if this is possible, if so how, and if not, where that might be documented. I have a client who's security policy prohibits switching (yes, even on the same VLAN) within a host (in this case blade server). Oh and there is an insistance to use 3120s inside the blade chassis.
Has to be the strangest request I have had in a while.
Any data would be GREATY appreciated!

Thanks for the follow up.
So by private VLANs, are you referring to "PVLAN":
"PVLANs: PVLANs are a new feature available with the VMware vDS and the Cisco Nexus
1000V Series. PVLANs provide a simple mechanism for isolating virtual machines in the
same VLAN from each other. The VMware vDS implements PVLAN enforcement at the
destination host. The Cisco Nexus 1000V Series supports a highly efficient enforcement
mechanism that filters packets at the source rather than at the destination, helping ensure
that no unwanted traffic traverses the physical network and so increasing the network
bandwidth available to other virtual machines"

Moving website hosting from MobileMe to Godaddy... how to?

Greetings!
I recently created a website using iWeb and hosted it on MobileMe using my Godaddy domain.
I am interested in moving the hosting abilities to the new hosting I purchased on GoDaddy. So far, I have changed most of the settings, I will try and list them all below. The issue I am having is that I publish the entire site (I know it takes some time to reflect) but when I visit the site, I expect to see the stock GoDaddy page without my site for the time being, but what I see is a link to MobileMe.
I changed:
The CNAME from www.me.com or whatever it was to the GoDaddy specs.
The CNAME alias from www.me.com to the @ sign like it requests. Under DNS manager
I just removed the forwarding to www.me.com or mobileme (cant remember -- in any event I removed it) so maybe that will fix it.
Should I have the nameservers set to a hosting account with these domains (which I assume links to my godaddy hosting and domain I purchased) or should I use the specific nameservers that godaddy specified based on the date I purchased the domain -- NS01.DOMAINCONTROL.COM and NS02.DOMAINCONTROL.COM?
Any other thoughts on changes I need to make on the GoDaddy side to complete the transition? Thank you for the feedback!
Message was edited by: bluefields21

Its bizarre when I upload the entire site using the option to Publish the Entire Site in iWeb 09, it lets me visit the site and it shows up. But when I go to firefox to try and get to it, it redirects me to MobileMe.
I upload it by logging all of the information on iWeb. Server address, user name (godaddy), password, etc... all of it correct, and the click FILE>Publish Entire Site.
I see now that the name servers option has been clicked on the one indicating a specific nameserver hosted by GoDaddy, which is the option I believe you were having me select. It has been that way overnight, so it never changed.
I am at a loss here why it would show up once, and then redirect me back to mobileme. I removed the forwarding to web.me.com and deleted the domain from my mobileme account too!

Moving Creative Suite 4 to new laptop. New download has 9 Pro, old install had 9 Pro "EXTENDED"

Moving Creative Suite 4 to new laptop. New download has 9 Pro, old install had 9 Pro "EXTENDED". Don't remember if my boss bought the "extended" as an exrta. BUT, when I go to Adobe and downlaod the "Extended" version, it says I have a better program already installed. IF this program is 9 Pro, then It is missing the 3D capture feature I was using to create 3D User Interactive PDFs of AutoCAD 3D models off the Model tab. Any clue what I need to do? Thanks, Cliff
[email address removed by host]

The version of Acrobat bundled with CS4 was Acrobat 9 Pro. Acrobat 9 Pro Extended was sold as a standalone product.
If you already have Acrobat 9 Pro Extended, then untick the option to install Acrobat when installing CS4, and you can carry on using the standalone copy. Acrobat and CS4 don't actually talk to each other, so installing CS4 won't affect your install of Acrobat unless you force the CS4 install program to replace it.

Nexus 7010 and ESX Host

Hi,
We are currently seeing issues on a ESX Host using 10G Fibre dual connectivity to a pair of Nexus 7010's using vPC for the port channel to this ESX host which was working fine , up to this weekend. No changes had been made on the Nexus or ESX host.
We have changed the hardware path for the believed fault on a vmnic which when part of the virtual switch cause VM's on the Host to stop pinging, although we still see a CDP neighborship with the ESX from the Nexus, but changing fibre and Nexus ports has not worked.
As part of the testing , the vmware guy was removing this 'faulty' vmnic from the Virtual switch , which is part of an ether channel bundle his end. My first question is, how does the Nexus detect a link leaving the bundle for the ESX host , when the actual physical link is still up , and all they have done is software removed it from on the ESX, as the Nexus will still attempt to push traffic across both bundled links. I know there is the Cisco 1000V software , which can be used at an extra price, but is this the only option.
Any help will be gladly welcome.

Hi
How the switch detects a link 'moving out' of the Etherchannel would depend on how you have configured it...
If you have used 'channel-group x mode on' under the physical ports in the channel, then it will not detect the change, and you will get problems. The solution is to ensure the config of the channel on both ends (server/switch) is consistent in this case. An inconsistent config will cause you connectivity issues.
If the switch automatically negotiates the Etherchannel (i.e. you are using LACP, and the server supports LACP) then it should detect the change.
Regards
Aaron
Please rate helpful posts...

N1010/N1000v : VMWare Vcenter - VSM (L3) on N1010 - VEM on ESX-host

Hi Vishal Mehta,
I am currently busy with the rollout of a nexus1010/nexus1000v.
Current status :
1/ Nexus 1010 (primary/secondary) setup is done/ok.
2/ Add VSB’s for Nexus1000v is aswell done/ok.
3/ VSB(VSM) towards VMWare VCenter communication (show svs connections J) is aswell done/ok.
4/ VEM activation on a ESX-Host à and this is the part were I’m a bit lost (sorry for that L… ) : how should I “understand” the VSM to VEM communication. And/or in other words : can a ESX-host (with a vswitch or distributed vswitch stay active in parallel with a VEM on that same ESX-Host ? Based on my current testing, everything points into the direction of “migrating from an existing vswitch to a VEM setup”).
[Note : I have a VSM to VEM Layer3 setup configured.]
4bis / what about the mgmt. communication between the ESX-host vswitch & the mgmt.communication between the ESC-host VEM (which is in my case layer3).
Is there a "good" one-pager available which shows the difference between VMware (distributed)vswitch vs VMware with Cisco Nexus1000v VEM. And additionally which parts can run in parallel between the VMware vcenter & an ESX-Host (when it comes to "controlling the vswitch & the nexus 1000v VEM).
Many thanks for your replies,
Best Regards,
Joost.

Hi Joost,
You have scored on all the initial setup steps and almost close to using VSM-VEM :)
To answer your main question – Yes a ESXi host can have multiple active Virtual Switches in parallel.
That is to say, you can have VMware’s DVS, Nexus 1000v VEM, vSwitch 1, vSwitch 2, …., vSwitch X all ON at same time.
The separation at switching level happens on basis of which VMs (via Port-Groups) use which Virtual Switch.
The uplinks (network adapters - vmnics) of host are distributed across virtual switches (CANNOT be shared)
So multiple active Virtual Switches gives you flexibility to segregate your virtual workloads across those uplinks
Now regarding the L3 mode between VSM and VEM
You can either use existing mgmt. interface (vmk0) to communicate between ESXi host (VEM) and Nexus 1000v VSM
Or you can have dedicated (separate from mgmt.) IP subnet with new VMkernel (say vmk1) for VEM-VSM communication.
Please refer below document which walks through the scenario you have implemented:
https://communities.cisco.com/docs/DOC-28631
we don’t have specific document to compare Nexus 1000v with other Distributed Virtual Switches
But few of advantages for opting Nexus 1000v are – its free, all NX-OS features, separate entity which can be owned/managed by Network team and other special features which I presented in above webcast recordings
Common deployments I have seen in field is Customers using vSwitch for mgmt. (vmk0) and other host specific functions
And they use Nexus 1000v VEM for NX-OS for additional functionality like LACP, PVLAN, QoS, ERSPAN and Virtual Machines traffic.
Thank you!!
Regards,
Vishal

System Default Cluster and New Cluster

Hi gurus
I am seeing a stange thing with our system. I created a new Cluster and associated it with the server host name.
It is now giving me a different login page than usual and doesnot allow "enterprise" ID to login
When I change the context back to System Default Cluster, I get regular login page and I am able to login as enterprise ID.
I am seeing that System Default Cluster has "Cluster Members" = full hostname.
Is this normal?
Point is we are able to create a new cluster now to associate it with our new context.
Thanks
JS

We loaded master data, and also created Directory configuration, and then associated the new cluster first to Directory config and then to the context. It was not giving an error anymore.
Hope this helps. It was all trial and error as everyone here are new to this product.
Thanks
JS

I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me!

I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me! I have a macbook pro and iphone 5

lewbobber wrote:
Basically i need to either take it to a shop that can unlock i.e. £40.00
Be aware, you go that route & every time you try to update or restore, it will error out, leaving your phone unusable. Not to mention, you void all warranty/support.
Sell it & use the proceeds towards an officially unlocked iPhone bought directly from Apple.
Good luck.

Oracle Coherence 3.7.1, It's always creating a new cluster in linux m/c.

Hi ,
I am facing an issue with Oracle Coherence 3.7.1 in linux m/c , where it’s always creating a new cluster, even if I start a new member provided with same cluster name as argument. -Dtangosol.coherence.cluster=name
It’s not joining the existing cluster , it’s always creating a new cluster with same name in Linux m/c.
But when I tried the same thing in windows m/c , it working fine , even If I start N number cache server’s it joining the same cluster as one more member.
Please someone help me, why it’s always creating a new cluster in linux m/c with same name ? why new VM’s are not joining the existing cluster? , Is there anything extra setup I need to do for Linux m/c.
Thanks in Advance.
<coherence>
<cluster-config>
<member-identity>
<cluster-name>My_cluster</cluster-name>
</member-identity>
</cluster-config>
<configurable-cache-factory-config>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value system-property="tangosol.coherence.cacheconfig">coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>
</coherence>
12-10-01 10:20:06.544/0.420 Oracle Coherence 3.7.1.0 <Info> (thread=main, member=n/a): Loaded operational configuration from "jar:file:/data/Informatica/nas/sdgshared/MyApputils/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2012-10-01 10:20:06.608/0.484 Oracle Coherence 3.7.1.0 <Info> (thread=main, member=n/a): Loaded operational overrides from "jar:file:/data/Informatica/nas/sdgshared/MyApputils/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2012-10-01 10:20:06.609/0.485 Oracle Coherence 3.7.1.0 <Info> (thread=main, member=n/a): Loaded operational overrides from "jar:file:/data/Informatica/nas/sdgshared/MyApputils/coherence/MyAppCache/lib/MyAppCoherenceCache.jar!/tangosol-coherence-override.xml"
2012-10-01 10:20:06.613/0.489 Oracle Coherence 3.7.1.0 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
Oracle Coherence Version 3.7.1.0 Build 27797
Grid Edition: Development mode
Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
2012-10-01 10:20:06.831/0.707 Oracle Coherence GE 3.7.1.0 <Info> (thread=main, member=n/a): Loaded cache configuration from "file:/data/Informatica/nas/sdgshared/MyApputils/coherence/MyAppCache/config/coherence-cache-config.xml"; this document does not refer to any schema definition and has not been validated.
2012-10-01 10:20:07.328/1.204 Oracle Coherence GE 3.7.1.0 <D4> (thread=main, member=n/a): TCMP bound to /10.176.4.105:8088 using SystemSocketProvider
2012-10-01 10:20:10.711/4.587 Oracle Coherence GE 3.7.1.0 <Info> (thread=Cluster, member=n/a): Created a new cluster "MyCache_cluster" with Member(Id=1, Timestamp=2012-10-01 10:20:07.397, Address=10.176.4.105:8088, MachineId=44371, Location=site:,machine:ctrel9014-12,process:19922, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=16, SocketCount=4) UID=0x0AB004690000013A1CE9ADE5AD531F98
2012-10-01 10:20:10.713/4.589 Oracle Coherence GE 3.7.1.0 <Info> (thread=main, member=n/a): Started cluster Name=MyCache_cluster
Group{Address=224.3.7.0, Port=37000, TTL=4}
MasterMemberSet(
ThisMember=Member(Id=1, Timestamp=2012-10-01 10:20:07.397, Address=10.176.4.105:8088, MachineId=44371, Location=site:,machine:ctrel9014-12,process:19922, Role=CoherenceServer)
OldestMember=Member(Id=1, Timestamp=2012-10-01 10:20:07.397, Address=10.176.4.105:8088, MachineId=44371, Location=site:,machine:ctrel9014-12,process:19922, Role=CoherenceServer)
ActualMemberSet=MemberSet(Size=1
Member(Id=1, Timestamp=2012-10-01 10:20:07.397, Address=10.176.4.105:8088, MachineId=44371, Location=site:,machine:ctrel9014-12,process:19922, Role=CoherenceServer)
MemberId|ServiceVersion|ServiceJoined|MemberState
1|3.7.1|2012-10-01 10:20:10.711|JOINED
RecycleMillis=1200000
RecycleSet=MemberSet(Size=0
TcpRing{Connections=[]}
IpMonitor{AddressListSize=0}
2012-10-01 10:20:10.736/4.612 Oracle Coherence GE 3.7.1.0 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
2012-10-01 10:20:10.918/4.794 Oracle Coherence GE 3.7.1.0 <D5> (thread=DistributedCache:HBaseMyCache, member=1): Service HBaseMyCache joined the cluster with senior service member 1
2012-10-01 10:20:10.942/4.818 Oracle Coherence GE 3.7.1.0 <Info> (thread=main, member=1):
Edited by: user10092089 on Oct 2, 2012 8:35 AM

Hi,
For unicast, you need to define the override file as under:
<?xml version='1.0'?>
<coherence>
     <cluster-config>
          <member-identity>
               <cluster-name system-property="tangosol.coherence.cluster">LPACache_cluster</cluster-name>
          </member-identity>
          <unicast-listener>
              <well-known-addresses>
               <socket-address id="1">
                   <address system-property="tangosol.coherence.wka1">coherence-node1-ip</address>
                   <port system-property="tangosol.coherence.wka1.port"> coherence-node1-port</port>
               </socket-address>
               <socket-address id="2">
                   <address system-property="tangosol.coherence.wka2"> coherence-node2-ip </address>
                   <port system-property="tangosol.coherence.wka2.port"> coherence-node2-port</port>
               </socket-address>
              </well-known-addresses>
          <port-auto-adjust system-property="tangosol.coherence.localport.adjust">false</port-auto-adjust>
          </unicast-listener>
     </cluster-config>
     <configurable-cache-factory-config>
           <class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
           <init-params>
              <init-param>
                  <param-type>java.lang.String</param-type>
                  <param-value system-property="tangosol.coherence.cacheconfig">coherence-cache-config.xml</param-value>
              </init-param>
          </init-params>
    </configurable-cache-factory-config>
    <logging-config>
           <severity-level system-property="tangosol.coherence.log.level">5</severity-level>
           <character-limit system-property="tangosol.coherence.log.limit">0</character-limit>
    </logging-config>
</coherence>Use the property -Dtangosol.coherence.localhost=coherence-node1-ip and -Dtangosol.coherence.localport=coherence-node1-port for coherence server1 and -Dtangosol.coherence.localhost=coherence-node2-ip and -Dtangosol.coherence.localport=coherence-node2-port for Coherence server 2. Once you start the servers with these changes, you should not see the below message:
Group{Address=224.3.7.0, Port=37000, TTL=4}
HTH
Cheers,
_NJ

I moved by iTunes files to an external drive because I was changing computers. I then moved the files to the new computer. My iPod is not linking with the files on the computer. What can I do?

I moved my iTunes files from my old computer to an external hard drive. I then moved those files to the new computer. My computer and iPad are not linking up (recognizing each other?). I installed the latest version of iTunes onto the new computer to see if that would help. It did not--I got the message that an iPad can only be linked up with one computer and the new download would not work with this iPod. So the iTunes' library and my iPod are not connecting, and I have no way of installing or removing new songs onto my iPad. What should I do to correct this?

Sorry, I had a typo. The last sentence should have read "iPod" (iPad): So the iTunes' library and my iPod are not connecting, and I have no way of installing or removing new songs onto my iPod. What should I do to correct this?

How to get the details of a LUN (Storage Logical Units) presented to an ESX host thru SCVMM 2012

Hi,
We are working with a UI Add-in for SCVMM 2012 where we should support both Hyper-v and ESX hosts. When added the ESX host and presented few LUNs (out of band operation) from the HP 3PAR array,
we are unable to view the Storage details like Storage Logical unit, Storage Pool and Storage Array when we select the same LUN in the Classification and Pools section of SCVMM.
We tried even with the PowerShell, but couldn’t help. Can you please guide us, how we can get the storage details of a LUN presented to the ESX host which is added in the SCVMM 2012.
Thanking you.
Regards,
Hari

Hi Jiannan,
No worries, you can go to UDDI client from the main page of PI i.e. http://<serverName>:<serverPort>/
And you use the search function for the TModel for your Physical System. Search parameters can use the % wildcard.
Hit the search and you find the UDDI Key for the Physical System.
Cheers.
Hemant Chahal

Moving XP drive to a new Mac Pro

I have an install of XP via Boot Camp on an old Mac Pro. It exists on it's own hard drive installed in the machine.
I'd like to move it to a new Mac Pro.
Is it as simple as moving the drive to the new machine?
When I run boot camp on the new machine will it recognize the previous install? Or will I need to do a new install?
Thanks
Dj

It 'should' work, but XP will see it is on different hardware and require activation or something. And, you always need to boot from XP CD once when moving it to do some system repair from what I heard.
If you want to address 4-8GB RAM; use both cpus, have better multi-core support, I wouldn't even use XP.
So depends on if this is retail or system builder whether you can deactivate and move the license.

I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

What is not working exactly?
Did it install correctly? Accept the serial number OK? Activate OK?

Moving ESX hosts to a new cluster?

Similar Messages

Maybe you are looking for