Moving feed to a new hosting service

We have had a podcast on iTunes for over a year and have about 24, 5 star ratings. If I move my feed to a new server (keeping the same URL), would all our ratings be lost in the iTunes Store? I found the FAQ that explains how to ensure that iTunes finds our feed if we switch hosting services... but it doesn't mention whether a new podcast page is created for our show, or if the same one is utilized and it's simply pointed to the new server which hosts the feed. Any info you could provide would be greatly appreciated.
Jen co-host of the Anomaly Podcast
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=277588936
http://www.anomalypodcast.com/

I've never tried this, so I can't speak from experience. However, the purpose of the procedure outlined in the Podcast Tech Specs is to change the feed URL rather than have to resubmit, so I would expect continuity to be maintained: it's still the same podcast as far as iTunes is concerned. Possibly someone who has successfully done this can chip in.

Similar Messages

How can I move my iWeb page on MM to new hosting service?

I have a web page under construction on MobileMe and want to move it to my nedw web hosting service. Can someone point me to a page on the Apple web site that can tell me how to do

So the movie shows how to publish to FTP.
Spot the error :
And also note that they use the domainname as the sitename. Not wrong, but not right either.

ITunes feed: moving from MobileMe to Rage Hosting

Hi there,
So I've successfully moved my website from MobileMe to Rage, and I've updated the rss.xml file in my iDisk to redirect iTunes to the new URL feed of my podcast. I'm a bit concerned because in migrating to Rage, the MobileMe portion of my website is now completely down. I subscribed to my podcast in iTunes, and I get the following error message:
The URL "http://www.nathanyoga.com/yoga/Vinyasa_Yoga_with_Nathan_Johnson/rss.xml" could not be found on the server. (Which is the URL of my old feed.)
The location of my new feed has slightly changed (it's just missing the "yoga" subpage) is at: "http://www.nathanyoga.com/Vinyasa_Yoga_with_Nathan_Johnson/rss.xml" could not be found on the server.
Has iTunes maybe not detected the change yet, or have I completely messed up the process?
Thanks for your help,
Nathanael

Hi Roger.
When I publish new podcast episodes, they're published at the root level. I noticed, though, that when I view the new rss.xml file at the root level (that I redirect iTunes to), it directs individual podcasts to the "yoga" folder. Here's a new podcast I've posted since migrating to a new hosting service and redirecting iTunes to the root level. Any idea why it still directs the link to the "yoga" subfolder?
<item>
      <title>Level 1/2 / 60-minutes(9-27-11)</title>
      <link>http://www.nathanyoga.com/yoga/Vinyasa_Yoga_with_Nathan_Johnson/Entries/2012/6/8 _Level_1_2___60-minutes%289-27-11%29.html</link>
      <guid isPermaLink="false">42598719-44c8-4090-88ef-b392ab911ce3</guid>
      <pubDate>Fri, 8 Jun 2012 09:13:22 -0700</pubDate>
iTunes sees the episode, but I get an error message when trying to download the NEW episode --- so I must create a copy of it in the 'yoga' subfolder in order for it to work OK.
I would, ideally, like to bypass this step but not sure it has to do with iTunes. I think it has to do with the rss.xml file that's being created by iWeb. Any ideas?
Thanks for all your help, Roger!
Nathan

Moved iWeb before MobileMe shut down but need new host, please help

Hello all,
I successfully moved my iWeb site to a new host before MobileMe shut down and I remember a discussion offering lots of hosting sites that were good and free and some for pay. I cannot find that discussion or the sites, although I thought I bookmarked them, there was one I even called and they were great but I can't find that bookmark UGHHHH.
So can you all please recommend me your faves and how good their customer service it. I am using NYPWH.com and have been for years for a site I never changed and now that I have to do some stuff to the new iWeb site, I find they are a little impatient with me, especially as technically challenged as I am.
Thanks so much for the help.
Gina

Each of the web hosting companies that were mentioned, are unique in their own ways. I just wanted to clear up a couple of things to hopefully give you a better idea of which host might suit you best.
First, godaddy is a powerhouse in the domain registration and hosting department, but what I've noticed over the last little while is a large increase in price. I used to recommend GoDaddy to users who are price senstitive but now I advise against.
The other thing that concerns me about some of the other hosts is that they often offer introductory rates to entice their buyers. Once a user signs up and uses their services for 3 months, 6 months, 1 year, 2 years, 3 years, whatever it may be, the user will often have to pay a much higher rate when that introductory term is over. This is something I personally do not like, and as a consumer, I don't think it's a very fair way to get people to use a service. And the most important thing for an iWeb user, is that these big companies don't really know iWeb very well.
MacMate is more of a MobileMe replacement, and a better option for iWeb users who will want to take advantage of customer support geared towards an iWeb user. I like that they saw a need for a MobileMe replacement and are delivering. Their price is a bit high though, but still in line with the second-term prices of some of the other companies.
Rage software does offer all of the services of an ordinary host. So I think there was some mininformation there. The things I like about Rage is they've been a pretty big part of the iWeb community for many years, so their support team knows iWeb in and out. A quick look at their price shows that they are actually one of the cheaper hosts ($5/month on the 3 year term, no introductory rate or more expensive rate upon renewal). They also provide their well known iWeb SEO Tool software for free to their hosting customers, which is a pretty big bonus in my opnion. Also, take a look at all their videos showing tips and tricks for iWeb users http://youtube.com/ragesw
So to summarize, I'm not really fond of those bigger companies that offer the introductory rates and then jack the prices when the user needs to renew. I like the idea of MacMate, and it seems like a good alternative solution to MobileMe to users who don't mind paying a bit extra to receive similar services to MobileMe. I like Rage because of price, iWeb support, and the free software, so they would be my recommendation. Use Rage software and dropbox if you're a user looking to replace iDisk. It's free, fast, syncs with all your computers, iPads, iPhones, etc.
I hope this was helpful and gives users a better idea about the hosting companies that are out there.

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Hi roddy,
thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
Any other ideas?
Suzanne

Any free video hosting services meant for iTunes podcasts?

Any free video hosting services meant for iTunes podcasts? I have found free audio hosting ones for iTunes podcasts, but are there any videos ones? THANKS!

The best I found was after searching YouTube for, how to prepare a video podcast to submit to iTunes Directory.
Several instructional videos come up that are worth watching. The two I initially found are recommended are podbean.com and podomatic.com.
I tried podbean.com, which easily generated the RSS feed iTunes requires, which I was able to successfully copy into the iTunes store line on Submit a Podcast to the iTunes Directory. Podbean has many helpful instructions on how to use their site and submit your video to iTunes.
Since I wasted 3 weeks trying to understand https://discussions.apple.com/message/23110806#23110806, other apple.com insructions, searching the internet, calling senior advisors in Apple Care (none of whom knew or could read this apple.com page either) I was really happy just to find one way to be able to do it. And easily too.
The only way you can possibly get an answer from Apple is to email [email protected], the iTunes Store says, since there is no phone support. Then I was told to wait 10 working days for a reply.
Thank goodness I finally searched YouTube. (There were many other confusing and difficult instructions on the internet.)
After uploading small video files onto my new site at podbean.com, at least I got 3 short videos onto iTunes that show in my computer's iTunes podcast subscriptions and they downloaded successfully. I understand I must wait a few days to get an ID from iTunes directory, which will then list my videos to the pubic as available in ITunes.
Podbean.com does have up to 100 mb free web hosting. (No video can bemore than 30 mb.) But it does allow everything iTunes needs, including a cover photo and description. All future feeds will be automatiically seen by iTunes through the podbean url that was given you, that you pasted into iTunes when you first submitted your podcast. So you only have to do this once, I understand.
Podbean wants to entice you to purchase more space so they show various prices.
I'm still wondering if somehow I could link my existing youtube videos (or facebook, myspace, vimeo, Flickr duplicates) in a field somewhere and link to them. Maybe?
Now that I know to use a web host that generates all the xml and RSS feed behind the scenes (since I don't know how) I'll explore these options, and the other site, podomatic.com.
Let us know if there are other good, free ones for video.
(One YouTube video said mypodcast.com is good for mp3 audio podcasts, FYI.)

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

How can I (automatically) import new photos of the photostream on my local disc (Mac)? Don't want to use new icloud service. Simply import.

New Photo app on Mac.
How can I (automatically) import new photos of the photo stream on my local disc (Mac)? Don't want to use new icloud service. Simply import.
With iPhoto every new photo was automatically imported and saved on my local disk (with "full resolution" that's what I only need). In the new photo app I have still my photo stream and when I move a photo (drag and drop from the photo stream) to a new album it indicates a (plus). My understanding is that the photo is now copied to my local disk. But when I deleted the photo in the photo stream it was also deleted in the album !?
If that is the case I can use the photo stream only until I reach the max of 1.000 photos, then I have to delete photos and I will have no copy left.
How can I "physically" copy a photo of the photo stream to my local disk? I just want to "transfer" all pictures taken with Ipads, Iphones to my central storage on the Mac. Please don't propose to connect it via iTunes (cable) to the Mac.
Any other suggestions?
thx
-Tom

The amazing device cannot do it because no amazing developer has written an app for it. There is some interest, others have asked, but i have a hunch that the market is fairly limited, and no developer has jumped at the chance just yet.
Any sort of tethered approach means try to feed the material to the pad thru the cck. Which means the app would have to use the allowed/existing cck pathway in a manner that does not violate the sandbox rules. That may be the problem.

Error while creating new app service plan for a webapp

Greetings !
I have a new webapp created and I want to move it a separate web app service plan to apply custom domain (Not available on free tier). From the new Portal I try to create new Web App Service plan and get this error.
"Failed to create App Service plan.
Failed to create App Service plan <App Service Plan Name>. There was an error processing your request. Please try again in a few moments."
Even while creation of the web app if I select create new App Service Plan it automatically goes into Free Plan.
Please help.
Thanks Paz

Hello Parvez Alam,
The issue of not being able to create a new App Service Plan is now fixed. I tried to reproduce this and was able to create the App Service Plan Successfully.
You should now be able to create the App Service Plan from the New portal. Also, the App Service Plan concept is only availaible in the new portal and not the existing portal.
You can refer to the link below for more information on this:
http://azure.microsoft.com/en-in/documentation/articles/azure-web-sites-web-hosting-plans-in-depth-overview/
Thanks,
Syed Irfan Hussain

Listener error while restoring to new host

I'm trying to restore a production database to a new host using a complete RMAN backup following these instructions:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov.htm#i1006453
I'm trying to force the database to start in NOMOUNT so I can restore the control files, then the data files. I took a crack at editing the initialization file, but I'm not sure I got things right, as I'm trying to restore a single-node RAC to a non-RAC system. Both servers are Windows.
I'm getting the following error:
RMAN> startup force nomount pfile='D:\Oracle\product\10.2.0\TSBAK\database\initt
sbak.ora';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 04/21/2010 14:01:19
RMAN-04014: startup failed: ORA-01078: failure in processing system parameters
RMAN-04017: startup error description: ORA-00119: invalid specification for syst
em parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_TSBAK'This is the listener (I just ran the net configuration wizard)
# listener.ora Network Configuration File: D:\oracle\product\10.2.0\TSBAK\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER_TSBAK =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = D:\oracle\product\10.2.0\TSBAK)
      (PROGRAM = extproc)
LISTENER_TSBAK =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = TSSQL2008B)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
)This is the init.ora file
*.__db_cache_size=343932928
*.__java_pool_size=209715200
*.__large_pool_size=8388608
*.__shared_pool_size=209715200
*.__streams_pool_size=8388608
*._optimizer_connect_by_cost_based=false
*.audit_file_dest='D:\Oracle\product\10.2.0\admin\TSBAK\ADUMP'
*.background_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\BDUMP'
*.cluster_database=FALSE
*.cluster_database_instances=1
*.compatible='10.2.0.1.0'
*.control_files='+DATA/tsbak/controlfile/current.260.591973329'
*.core_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\CDUMP'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_file_multiblock_read_count=16
*.db_files=1024# INITIAL
*.db_name='TS'
*.global_names=FALSE
##clustdb1.instance_name='TS1'
*.instance_number=1
##clustdb1.instance_number=1
*.java_pool_size=209715200
*.job_queue_processes=10
*.large_pool_size=8388608
##clustdb1.local_listener='LISTENER_TSBAK'
*.local_listener='LISTENER_TSBAK'
*.log_archive_dest_1='LOCATION=+DATA/TSBAK/'
*.log_archive_format='ARC%S_%R.%T'
*.log_buffer=8192# INITIAL
*.log_checkpoint_interval=10000
*.max_dump_file_size='10240'# limit trace file size to 10 K each
*.nls_timestamp_format='YYYY-MM-DD HH24:MI.SS.FF'
*.open_cursors=300
*.open_links=4
*.parallel_max_servers=5
*.pga_aggregate_target=203423744
*.processes=250# INITIAL
*.remote_listener='LISTENER_TSBAK'
*.remote_login_passwordfile='EXCLUSIVE'
##clustdb1.remote_login_passwordfile='exclusive'
*.sga_max_size=1317011456
*.sga_target=788529152
*.shared_pool_size=209715200
*.smtp_out_server='mail.mt.net:25'
*.thread=1
##clustdb1.thread=1
*.undo_management='AUTO'# For automatic undo management
*.undo_tablespace='UNDOTBS1'
##clustdb1.undo_tablespace='UNDOTBS1'
*.user_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\UDUMP'I am not sure which piece has the error, but would appreciate some help. This is one of the few steps that there isn't much mention of in the guide.

okay moving on. I got previous error corrected (the directories hadn't been created yet). Now, I'm facing a new one and I did a copy/paste of the directory string, so I know it's valid.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 04/22/2010 12:13:34
RMAN-04014: startup failed: ORA-16024: parameter LOG_ARCHIVE_DEST_1 cannot be parsedthe parameter is:
*.log_archive_dest_1='D:\Oracle\product\10.2.0\TSBAK\database\archive'Can someone see what I'm doing wrong here?

SLD/JCo Migration to new host

Dear Experts,
I have gone through many posts but still not able to understand fully the procedure to migrate SLD from one host to another. So its my humble request you to read my issue and guide me.
We have a situation that we have moved from physical to virtual host on our SLD. But when I shutdown the previous host, my ESS/MSS on Portal stops functioning.
My Landscape is : Portal 7.1 - Old SLD -- Was serving as both Solution Manager and SLD (for around 20-30 systems)
Now we want to move the OLD SLD to a new host, -- New SLD -- Will serve as SLD for all systems.
There is one production Portal system which has ESS/MSS with Jco's, it is currently pointing to OLD SLD. When I login to OLD SLD and search for my Production Portal, I can see that it has few Jco Destinations and few "deployed objects" as shown in screenshot below
These are the steps I have followed in my new SLD.
1. Went to Visual Admin of my Portal system -- Changed SLD Data Supplier (CIM) to NEW SLD. Restarted Portal
2. Logged in to new SLD and created JCO Destinations (exactly same as in OLD SLD)
This is my NEW SLD, I cant see the "deployed objects" but i have created the JCO destinations (manually)
But then, I am getting errors in ESS/MSS Applications for Jco related.
Can someone please help me in figuring out what I am missing ??
1. Importing CIM data in new SLD from old SLD ??
Any guidance on this will be helpful.
Thanks,

Hi Rajat,
Take a look at More on System Landscape Directory. There are several blogs there that talk about migrating from one SLD to another. (Especially Switching between 2 SLD Systems in Sync with an LMDB or a 3rd SLD).
It sounds to me like you changed the setup for the data supplier side, (so your new SLD has the correct data) but you haven't changed the SLD-client setup of the portal (so your portal doesn't know to look at the new SLD for data). Take a look at this SAP help document, Synchronizing the System Landscape Directory with the Portal, and see if you can find what you need there.
I hope this helps!
Best regards,
--Tom

'Not running in a hosted service or the Development Fabric' exception on deployed Worker role

We are getting this exception after a worker role has been operating fine in production for several weeks. Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:
Not running in a hosted service or the Development Fabric
Note that the role is full trust, and as I mentioned this in in production on the Azure servers, NOT in debug. The worker role itself does some dynamic compilation, for which it needs to start a new AppDomain. It appears that the exception is
coming from the spawned AppDomain when it occurs. The exception itself is triggered on a simple Trace.TraceInformation call.
What could cause this?
What can we do to recover from this?

We are getting this exception after a worker role has been operating fine in production for several weeks. Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:
Not running in a hosted service or the Development Fabric
Note that the role is full trust, and as I mentioned this in in production on the Azure servers, NOT in debug. The worker role itself does some dynamic compilation, for which it needs to start a new AppDomain. It appears that the exception is
coming from the spawned AppDomain when it occurs. The exception itself is triggered on a simple Trace.TraceInformation call.
What could cause this?
What can we do to recover from this?
Hi,
I have tested this situation in Windows Azure platform and i can not reproduce your exception message, my test code in follwoing MSDN samples and i deploy it in Production status.
The MSDN article (include Appdomain code snippets)
http://msdn.microsoft.com/en-us/library/system.appdomain.aspx .
Base on my understand, the "Not running in a hosted service or the Development Fabric" error message occur when Azure Emulator or Azure development fabirc, because you create a new appdomain in WorkRole, and it may cause permission errors, a similar
posts by my research:
https://social.msdn.microsoft.com/Forums/en-US/windowsazuretroubleshooting/thread/50987285-58ac-484e-b604-725fe01a3325
If you still have some problems, please inform me. Thank you.
Please mark the replies as answers if they help or unmark if not. If you have any feedback about my replies, please contact
[email protected]
Microsoft One Code Framework

How to change the management agent to use new management service ?

RDBMS Version:: 10.2.0.3
Operating System and Version:: AIX 5L
OEM Console Operating System and Version:: AIX 5L
Configuring the Management Agent to Use a New Management Service
Hi,
I am trying to change the management agent to use new management service using following process.
1. Stop management agent.
2. Change in file Agent_home/sysman/config/emd.properties
For values REPOSITORY_URL and emdWalletSrcUrl and emdWalletDest
3. Delete all the files in the following directories:
AGENT_HOME/sysman/emd/upload/
AGENT_HOME/sysman/emd/state/
4. Start the management agent.
./emctl status agent is showing the new URL for management server (OMS).
But I am not able to locate the new host on the Web console at the OEM console where it is changed to.
Can you suggest me workaround for the same?
Thanks
Dilipkumar Patel

Hi,
I am getting following error when trying to upload.
tb152 /appl/oracle/oem/10.2.0/bin> ./emctl upload agent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
tb152 /appl/oracle/oem/10.2.0/bin>
Regards
Dilipkumar Patel.

How to define new host in catalog?

Hi guys,
I have migrate 9R2 database to new host location and i wanted to run backup using same script which worked on old host but i get error :
Wed Dec 8 13:59:13 CET 2010
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> #
2> # Full Backup
3> #
4> # Recovery Manager script
5> #
6>
7> #connect target sys/xxxyyy@dev;
8> connect target "/";
9> connect CATALOG rman/catalog@oemrep;
10>
11> run {
12> backup database plus archivelog delete input ;
13> report obsolete;
14> delete obsolete;
15> crosscheck backup;
16> delete noprompt expired backup;
17> }
18>
19> exit;
connected to target database: DEV (DBID=1703379406)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04004: error from recovery catalog database: ORA-12154: TNS:could not resolve service name
Recovery Manager complete.
Is this means that i need to define new host location in RMAN CATALOG or what?

You are right!
But still i receive this
Wed Dec 8 14:49:47 CET 2010
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> #
2> # Full Backup
3> #
4> # Recovery Manager script
5> #
6>
7> #connect target sys/xxxyyy@ssl21dev;
8> connect target "/";
9> connect CATALOG rman/catalog@oemrep;
10>
11> run {
12> backup database plus archivelog delete input ;
13> report obsolete;
14> delete obsolete;
15> crosscheck backup;
16> delete noprompt expired backup;
17> }
18>
19> exit;
connected to target database: SSL21DEV (DBID=1703379406)
connected to recovery catalog database
Starting backup at 08-DEC-10
current log archived
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/08/2010 14:49:48
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20001: target database not found in recovery catalog
Recovery Manager complete.
So prorbably old host database has different DBID defined in RAN catalog?

Could not locate new host added from Solaris 10 Sparc servers

Hi All,
I am having difficulty finding a new host (Stallion terminal server. e.g. jodie - 10.56.4.7) using ping on our Sun Fire T5220 Solaris 10 on our network, even though jodie has been updated to the DHCP (10.56.19.157) server and can be located from other hosts that runs Red Hat Linux and Windows XP. By restarting nscd daemon with the following commands did not help:
# svcadm disable system/name-service-cache
# svcadm enable system/name-service-cache
Below is the static IP address detail for the Solaris 10 server:
$ showrev
Hostname: angel
Hostid: 4e2f56yu
Release: 5.10
Kernel architecture: sun4v
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain:
Kernel version: SunOS 5.10 Generic_144488-12
$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.56.120.12 netmask fffffe00 broadcast 10.56.121.255
The same detail on a Red Hat Linux server that can locate jodie is:
root@bobby /sbin>uname -a
Linux bobby.abc.com 2.4.18-3 #1 ...... i686 unknown
root@bobby /sbin/ifconfig -a
eth0      Link encap:Ethernet HWaddr 00:20:ED:5D:2F:94
          inet addr:10.56.8.218 Bcast:10.56.15.255 Mask:255.255.240.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:653366594 errors:0 dropped:0 overruns:698544 frame:0
          TX packets:5815250 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:2492338569 (2376.8 Mb) TX bytes:1003467939 (956.9 Mb)
          Interrupt:10 Base address:0xd000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:145903 errors:0 dropped:0 overruns:0 frame:0
          TX packets:145903 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12496874 (11.9 Mb) TX bytes:12496874 (11.9 Mb)
Likewise, the IP configuration on my Windows XP PC that can also see jodie after having flushed its local dns cache with "ipconfig /flushdns":
C:\Documents and Settings\crystal>ipconfig -all
Windows IP Configuration
        Host Name . . . . . . . . . . . . : BEATLE
        Primary Dns Suffix . . . . . . . : musician.abc.com
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : musician.abc.com
                                            abc.com
                                            abc.com
                                            com
Ethernet adapter Local Area Connection:
        Connection-specific DNS Suffix . : abc.com
        Description . . . . . . . . . . . : Intel(R) 82566DM Gigabit Network Connection
        Physical Address. . . . . . . . . : 00-19-BB-55-79-90
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 10.56.3.91
        Subnet Mask . . . . . . . . . . . : 255.255.240.0
        Default Gateway . . . . . . . . . : 10.56.0.1
        DHCP Server . . . . . . . . . . . : 10.56.19.157
        DNS Servers . . . . . . . . . . . : 10.56.0.2,10.56.0.33What I suspect is the DNS configuration on angel (Solaris 10) to lookup DNS server (10.56.0.2, 10.56.0.33) is not correct, or that it is on another subnet (10.56.120.0) and require additional setup to see other hosts that do not belong to its own subnet. angel has only recently been built and its likely that its DNS setup has not been configured correctly.
Other Solaris 10 Sparc servers on the same subnet 10.56.120.0 also experienced the same issue even though they have been around for a while. Nevertheless, their DNS configuration may have been manually configured to see certain subnets and not 10.56.4.0 where jodie lives.
Any idea on where the problem lies?
Thanks in advance,
Crystal

Hi All,
I am having difficulty finding a new host (Stallion terminal server. e.g. jodie - 10.56.4.7) using ping on our Sun Fire T5220 Solaris 10 on our network, even though jodie has been updated to the DHCP (10.56.19.157) server and can be located from other hosts that runs Red Hat Linux and Windows XP. By restarting nscd daemon with the following commands did not help:
# svcadm disable system/name-service-cache
# svcadm enable system/name-service-cache
Below is the static IP address detail for the Solaris 10 server:
$ showrev
Hostname: angel
Hostid: 4e2f56yu
Release: 5.10
Kernel architecture: sun4v
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain:
Kernel version: SunOS 5.10 Generic_144488-12
$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.56.120.12 netmask fffffe00 broadcast 10.56.121.255
The same detail on a Red Hat Linux server that can locate jodie is:
root@bobby /sbin>uname -a
Linux bobby.abc.com 2.4.18-3 #1 ...... i686 unknown
root@bobby /sbin/ifconfig -a
eth0      Link encap:Ethernet HWaddr 00:20:ED:5D:2F:94
          inet addr:10.56.8.218 Bcast:10.56.15.255 Mask:255.255.240.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:653366594 errors:0 dropped:0 overruns:698544 frame:0
          TX packets:5815250 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:2492338569 (2376.8 Mb) TX bytes:1003467939 (956.9 Mb)
          Interrupt:10 Base address:0xd000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:145903 errors:0 dropped:0 overruns:0 frame:0
          TX packets:145903 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12496874 (11.9 Mb) TX bytes:12496874 (11.9 Mb)
Likewise, the IP configuration on my Windows XP PC that can also see jodie after having flushed its local dns cache with "ipconfig /flushdns":
C:\Documents and Settings\crystal>ipconfig -all
Windows IP Configuration
        Host Name . . . . . . . . . . . . : BEATLE
        Primary Dns Suffix . . . . . . . : musician.abc.com
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : musician.abc.com
                                            abc.com
                                            abc.com
                                            com
Ethernet adapter Local Area Connection:
        Connection-specific DNS Suffix . : abc.com
        Description . . . . . . . . . . . : Intel(R) 82566DM Gigabit Network Connection
        Physical Address. . . . . . . . . : 00-19-BB-55-79-90
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 10.56.3.91
        Subnet Mask . . . . . . . . . . . : 255.255.240.0
        Default Gateway . . . . . . . . . : 10.56.0.1
        DHCP Server . . . . . . . . . . . : 10.56.19.157
        DNS Servers . . . . . . . . . . . : 10.56.0.2,10.56.0.33What I suspect is the DNS configuration on angel (Solaris 10) to lookup DNS server (10.56.0.2, 10.56.0.33) is not correct, or that it is on another subnet (10.56.120.0) and require additional setup to see other hosts that do not belong to its own subnet. angel has only recently been built and its likely that its DNS setup has not been configured correctly.
Other Solaris 10 Sparc servers on the same subnet 10.56.120.0 also experienced the same issue even though they have been around for a while. Nevertheless, their DNS configuration may have been manually configured to see certain subnets and not 10.56.4.0 where jodie lives.
Any idea on where the problem lies?
Thanks in advance,
Crystal

Moving feed to a new hosting service

Similar Messages

Maybe you are looking for