Moving to right or left a picture in picture video

I have two videos of the same scene that are shot from two cameras - hence different views. Since the videos are long, I have a 3 minute segment of both videos with one of the videos as a picture in picture video on the bottom of the main video segment. But the videos are slightly out of sync (by only 2 seconds or so). I haven't been able to figure out how to move one of the videos left by two seconds to get them in sync.

I'm using 10.6.4. I have a picture-in-picture that I am trying to move (drag) to a different location. Every time I attempt, a yellow gidline appears on top and left, but as soon as I start to drag Imovie crashes. Anyone have any ideas? I'd love a response [email protected] or [email protected]

Similar Messages

Flash cs3: how to make moving/scrolling photo menu left and right?

http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.

scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
 if(scena_mc.x == 0){
 scena_mc.x == 0;
 else if(scena_mc.x <= -10){
 scena_mc.x += 10;
 navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
 if(scena_mc.x == 0){
 scena_mc.x == 0;
 else if(scena_mc.x <= -10){
 scena_mc.x += 10;
function navL_Out(e:MouseEvent){
 navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
 if(scena_mc.x == -1164){
 scena_mc.x == -1164;
 else if(scena_mc.x >= -1154){
 scena_mc.x -= 10;
 navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
 if(scena_mc.x == -1164){
 scena_mc.x == -1164;
 else if(scena_mc.x >= -1154){
 scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
 navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

Scroll bar moved layout slightly to left

If content on ALL of my site either did or didn't require a scroll bar, the transitions when clicking from page to page would all look smooth. Unfortunately I have some pages that are short (and so the browser displays no display bar) and other pages that are long, and when the scroll bar appears, my content gets moved slightly to the left. I suppose I could just keep adding a bunch of new paragraphs at the bottom of my short pages until a scroll bar appears, but this problem is bugging me. I'd like to fix it the real way. To visualize this problem see attached pictures below.
And here's some of the code that I think is relevant to my issue here.
body {
    background-attachment: fixed;
    background-image: url(images2/palisades.jpg);
    background-repeat: no-repeat;
    background-color: #000000;
    background-position: center left;
    -webkit-background-size: cover;
    -moz-background-size: cover;
    -o-background-size: cover;
    background-size: cover;
    margin: 0;
    padding: 0;
.header {
    width: 1000px;
    margin-left: auto;
    margin-right: auto;
    height: 50px;
Below: the scroll bar pushes content slightly to the left.

Actually, this one looks pretty simple.
The first page shown is long enough to need a vertical scrollbar. When that scroll bar kicks on, the actual width of the page changes slightly, so the content (which appears to be centered) will shift to the left when the scroll bar appears.
If it really bothers you (most visitors would never notice it) you can add a scroll bar to every page on your site (the pages that don't need it will pop up with a grayed out bar that doesn't allow scrolling) and your pages won't shift anymore if you add in overflow-y:scroll to the body tag css....
body {
     overflow-y:scroll;

Wireless trackpad: misses clicks, tracks poorly right to left

Using Yosemite, iMac 5K, wireless keyboard and magic trackpad
The trackpad sometimes misses a click and sometimes doubles the click. I know that the "click" is registered by the little buttons on the bottom of the trackpad. It is on a tidy hard surface and I know the buttons are getting moved. It feels like maybe it misses if I hold the button down longer than it wants me to. But then sometimes it just plain doesn't respond. (Yes, the battery is still good, showing 81% but this phenomenon has been happening since the pad and batteries were new.) Oh, I see more now while I'm typing. If the cursor shows as a little pointy arrow, the click doesn't register. If it shows as a double-ended vertical input cursor, it does register. This perhaps means that even though the pointer has actually moved, the computer hasn't seen it.
But then sometimes one click registers as two. For example, I try to position the mouse and end up with a word (or, worse, the name of a file in the finder) selected instead. I have changed settings in accessibility to make the double click speed slightly slower, which I think might have improved the behavior a bit. On the other hand, with the previously mentioned issue when the click doesn't seem to register. When I then do another click to make it actually see the move, that is when a double or triple click will happen. This is for moves of multiple inches with more than a split second in between.
I also find that the trackpad doesn't register movement reliably especially when I am trying to move it by pushing right to left across the pad. I can position it so that multiple light strokes on the pad don't move the cursor at all. Again, this happens when the cursor is not "expecting" typing. For example, in this support communities entry box with the arrow showing instead of the vertical input thingie.
It isn't really predictable when the problem is going to appear. As you can imagine, this makes "mouse ahead" input pretty dangerous - renaming files, deleting bodies of text with the Undo not being available anymore because of going too fast.
I already returned one of these trackpads as defective. Now I'm thinking that this is actually just the design behavior of the thing. Perhaps a pad from some other mfgr would work more reliably?
[p.s. I wish if it is going to show me the time of last autosave that it would use the local system display time, not the current time in California.]

I hope they can fix it. When my macbook came back from apple after having another issue fixed, the button was pivoting around the middle, meaning you could only click in the middle, not the edge. Too it back, they replaced the top case and it came back with the same problem. It now in again having the top case replaced again.
They're now telling me that it's "normal". It wasn't like that when I bought it!

Pages v5.5.2 - Missing Option for right-to-left languages (bi-directional) such as Arabic & Kurdish

Started using Pages as Windows for Mac does not support right-to-left languages (Kurdish, Arabic) effectively. BUT, sadly disappointed that Pages does not seem to support right-to-left (bi-directional) text either. I realise it gives you the option of aligning the text to the right-hand side but this is different from having the right-to-left option. Previous posts said it could be found under Format - Text and there should be the option 'Reverse Text Direction' (see related thread here) but in the version I have (v5.5.2) I can't see it.
Please can anyone help? I'm having to seriously think about going back to Windows as Apple doesn't provide sufficient support for right-to-left languages.

sjmcwhirter wrote:
I've seen the notes you referred to before and so was looking for the 'arrows' button but it's not present in my version of Pages.
I think perhaps something is wrong with your machine. See below a picture of mine. Do you have the Arabic or some other RTL keyboard showing in the "flag" menu at the top right?

Move an animator object from right to left

How do I move an animator object from right to left? I tried using the value with a minus sign in front of it. (i.e. -(xcoord) ) Please help.
Thanks,
Chris

After you create the animator, click on it on the panel, you will see a rectangle. You can drag the rectangle to bigger or smaller. The graphic will be moving inside of this rectangle. In this rectangle, bottom left corner is x0 y0. Top right cornet is x100, y100.
Ryan Shi
National Instruments
Attachments:
process1.zip ‏1 KB

Is it possible to move app's right to left to another screen?

I accidentally moved an app to another screen; left to right; but when I tried to move it back I couldn't reverse the process. Is it possible to move an app from screen to screen right to left?

Drag the app to the edge of screen 1, hold it there and wait until it switches to screen 2, then move to where you want on screen 2.

IBooks Author Right to Left Support

Hi,
Is there a way for me to create an iBook in iBooks Author which goes right to left. The contents of the book are going to to be pictures anyway but I need the pages to run in the opposite direction to the norm.
Is is possible?
Thanks

I don't think it is possible. Such books require epub3 format, and iBA cannot produce that. InDesign would probably work.

Flash is moved 10px to the left

Hello!
I just made a flash-file (swf) with CS5.5 11.5.1.349 at a size of 800*800px.
There are some texts that go really near the right border and some pictures at x-position =0.
However, when I view it in the adobe flash viewer or the flash-plugin within firefox, there is a little margin on the left (about 10px) and also about 10px missing on the right.
Is that a problem with my flash-player or did I set some settings wrong?
I'm using WIndows 7 SP1 64 bit by the way.
You can see the flas uploaded here (if you don't see a problem, it's likely my flash-player):
http://dediggefedde.deviantart.com/art/Divequest-flash-chapter-5-345336055
By the way: I used a lot of pictures and made some resizes within the flash. Are they automatically optimized or do I need to resize them first before importing to not produce a high file-size?
Regards,
Julian

Well, even the native flash player when opening the swf-file shows this behavior...
Ans since I didn't hear about a method to change it's behavior with html and the margin is INSIDE the embebed object and not a margin or padding, the html-export gives me the exact same display with an offset of about 10px to the right.
Do you get the same problem when viwing the flash-file?
e.g. when you click "Start" the white picture should be really on x-pos=0, no black frame on the left.
or when you hover at the bottom, the grey bar should be filling. it is set to x=0px, width=800px.
Is there an option in adobe flash to set a global offset?

Camera Vision Loop Snap will be 1% right and left inverse in Vision2013 and Labview 2013.

Hello,
I use a Camera to Loop Capture Vision Snap in Vision2013 and Labview 2013.
(see the right-up picture that is the needle in the right side, but the right-down picture it is in the left side.)
The right-up picture that is the current snap image shows normally.
The right-down picture is after en-queued and de-queued image.
But the image will be 1 % Randenly Chance to show right and left inverse.
Could someone tell me how to solve the problem?
Thanks.
Attachments:
IMAQ_Mirro_)_(.JPG ‏149 KB
IMAQ_realtime_image_snap_queue.JPG ‏196 KB

Good-day.
2 Cameras are both the same "AVT GUPPY F033B" , Connected to the IEEE1394 interface PCI Card (2 ports, Controller Chip is Texas Instruments).(See" cam_driver.JPG")
Both Cameras are 1 % Randenly right and left inverse.(See" IMAG_Mirro_)_(2.JPG")
The Labview 2012 program is the attached file called "IMAGE_LOOP_SNAP_Queue As a Multiplexer_LV2012.vi.zip"
Thanks.
Attachments:
cam_driver.JPG ‏55 KB
IMAQ_Mirro_)_(_2.JPG ‏159 KB
IMAGE_LOOP_SNAP_Queue As a Multiplexer_LV2012.vi.zip ‏769 KB

Indent is moving to right by 22 characters.

hi,
When i press pretty printer code moving to right by 22 characters.
I want to change it to left indent.
Please suggest the settings.I tried Utilities->settings->abap editor->Pretty printer, but couldn't do it.
Thanks in advance.

Hi,
In addition, the pretty printer may be work based on indentation of Introductory Program Statements.
You need to check the Introductory Program Statements (usually the first program declaration ex: "REPORT") if the line contain any space on the left.
Regards,
Oki

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Urgent help required regarding reports Arabic Characters (Right to Left)

Hello Members
I am facing problem while deploying oracle reports on application server (Forms & Reports). I am using Developer Suite 10g 10.1.2.0.2 and same version of Application Server on Windows Environment. I have some fields in Arabic and some are in English. The reports output is in PDF format. I am also using PDF Subset fonts feature to subset the Arabic font problem.
Now the problem which I cannot is that I wanted that PDF generate report read Right to Left only for some specific fields not all fields. For example the following fields displayed as
395/دمام (Actually reading left to right and same saved in database)
But I wanted to be numbers are displayed first and then arabic word (dammam) while reading right to left.
My NLS_settings on developer suite and application server is “AMERICAN_AMERICA.AR8MSWIN1256”
When I am changing the nls_settings to “ARABIC_SAUDI ARABIA.AR8MSWIN1256”. It convert the whole report layout from righ to left and then it is not reading well the English fields i.e. left to right.

The problem was solved by changing
REPORTS_BIDI_ALGORITHM=UNICODE
REPORTS_ARABIC_NUMERAL=ARABIC
But now i have another issue that i wanted to display one filed with REPORTS_ARABIC_NUMERAL=ARABIC and second with REPORTS_ARABIC_NUMERAL=HINDI. During my all search i found that this is applied on Report wise and we cannot set for one filed.
Would any body will help me to change REPORTS_ARABIC_NUMERAL for one field at runtime or design time either changing the registry value or any configuration file of application server ?

How to show arabic data in to crystal reports ?How to aligh crystal report right to left

we are trying to make a crystal report for both english and arabic..All the arabic data is stored in data base tables.And for arabic screens we need tables and datas come right to left.. 1)How can we get the arabic data and right to left alignment in crystal reports? 2)Is thee any direct method to change the report alignments? can u please send some sample codes. we are using java version= 1.5 database using =Oracle 9i char set we are using for arabic= CP1256 Tomcat using=4.1 we are using Crystal Reports11 We are not having seperate rpt files for reports. we are making each Sections and adding this sections to FieldObjet to make the report dynamically. A sample Employee report in english is attached..Can u instruct how can i get this report in arabic assuming all datas are stored in database. import java.awt.BorderLayout; import javax.swing.JFrame; import com.crystaldecisions.ReportViewer.ReportViewerBean; import com.crystaldecisions.sdk.framework.CrystalEnterprise; import com.crystaldecisions.sdk.framework.IEnterpriseSession; import com.crystaldecisions.sdk.occa.managedreports.IReportAppFactory; import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument; import com.crystaldecisions.sdk.occa.report.data.; import com.crystaldecisions.sdk.occa.report.definition.; import com.crystaldecisions.sdk.occa.report.lib.PropertyBag; import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException; import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource; public class ReportSample { ReportClientDocument rptDoc=null; int fldTop=0; int fldWidth=1440; int fldHeight=400; int pageWidth=11500; ReportSample(){ try{ IEnterpriseSession oEnterpriseSession= CrystalEnterprise.getSessionMgr().logon("Administrator", "","zzzza","secEnterprise"); IReportAppFactory oReportAppFactory = (IReportAppFactory)oEnterpriseSession.getService("", "RASReportService"); rptDoc = oReportAppFactory.newDocument(java.util.Locale.ENGLISH); Table oTable = new Table(); oTable.setConnectionInfo(getConnectionInfo("zzzzz","zzzz","zzz", "zzz"));//Connectin to oracle database oTable.setName("EMP1"); rptDoc.getDatabaseController().addTable(oTable, null); String[] columnName={"EMPNAME"}; Section dtlSection=(Section) rptDoc.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0); int fldLeft=100; for (int i=0;i<columnName.length;i+) { dtlSection= (Section) rptDoc.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0); try{ FieldValueType fldValueType = FieldValueType.stringField; String javaDataType="String"; add_db_field( dtlSection, oTable.getName()"."columnName, fldValueType,javaDataType, fldLeft, fldTop, fldWidth, fldHeight); }catch(Exception e){ e.printStackTrace(); } fldLeft = fldLeftfldWidth; } try { //Create and set up the window. JFrame frame = new JFrame("ReportsViewer"); frame.setTitle( "Crystal Reports Viewer"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); ReportViewerBean viewer = new ReportViewerBean(); viewer.init( new String[0], null, null, null); IReportSource rptSource = rptDoc.getReportSource(); viewer.setReportSource( rptSource ); frame.getContentPane().add( viewer, BorderLayout.CENTER ); frame.setSize( 700, 500 ); frame.setVisible(true); viewer.start(); }catch(Exception e) { e.printStackTrace(); } }catch(Exception e) { e.printStackTrace(); } } public ReportObject add_db_field(Section oSection, String field_name, FieldValueType oFieldValueType,String fldDataType, double x, double y, double w, double h) throws ReportSDKException { DBField oDBField = new DBField(); oDBField.setName(field_name); oDBField.setType(oFieldValueType); FieldObject oFieldObject = new FieldObject(); oFieldObject.setDataSource(oDBField.getFormulaForm()); oFieldObject.setFieldValueType(oDBField.getType()); IndentAndSpacingFormat indentSpacing = new IndentAndSpacingFormat(); IStringFieldFormat stringFieldFormat = oFieldObject.getFieldFormat().getStringFormat(); stringFieldFormat.setIndentAndSpacingFormat(indentSpacing); oFieldObject.getFieldFormat().setStringFormat(stringFieldFormat); rptDoc.getReportDefController().getReportObjectController().add(oFieldObject, oSection, -1); return oFieldObject; } public ConnectionInfo getConnectionInfo (String new_username, String new_password, String new_dsn, String new_database) { ConnectionInfo oConnectionInfo = new ConnectionInfo(); // Make a copy, don't change the original. PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes(); oPropertyBag1.put("QE_ServerDescription", new_database); oPropertyBag1.put("Database DLL", "crdb_oracle.dll" ); oPropertyBag1.put("DSN", new_dsn); // Set new table logon properties attributes PropertyBag oPropertyBag2 = new PropertyBag(); oPropertyBag2.put("Server", new_database); oPropertyBag1.put("QE_LogonProperties", oPropertyBag2); oConnectionInfo.setAttributes(oPropertyBag1); oConnectionInfo.setUserName(new_username); oConnectionInfo.setPassword(new_password); // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine). oConnectionInfo.setKind(ConnectionInfoKind.CRQE); return oConnectionInfo; } public static void main(String[] args) { // TODO Auto-generated method stub new ReportSample(); //String cmsName = "admin-42cdvir7e(2)"; } } 

This issue can be solved when you create the reports without needing to write any extra code. I haven't tested this solution because I don't have any data to test it against.First you want to make sure that you are using a UNICODE font which I'm sure you are probably already doing. Then to configure the "Right to Left" you can right click on any field and select "Format Text" or "Format Field". You should see a "Paragraph" tab. In there you can set the content to be "Left to Right" or "Right to Left". The button on the right allows you to make this setting conditional on a parameter value or something like that. I hope this helps. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

Moving to right or left a picture in picture video

Similar Messages

Maybe you are looking for