MP-101 paper jams my MG3100 printer. Manual says it should work but it doesn't. Can someone help?

Subject says it all. I got MP-101 paper for my MG3100 printer. The manual for the printer says this paper should work fine, But the printer fails to pull it all the way through and my printer jams. Is this a typo in the manual, or is there some way to get it to work? I set the printer to Photo paper on the actual printer itself, and choose "Matte Photo Paper" on media type inside the printer properties.

Apple keeps your last 3 backups by making a complete backup of your device at the time of the backup, then keeping any changed files in case you want to restore to an ealier backup. So it does, for the most part, overwrite the current backup. However if your backup significantly increased in size it would have to allocate more space in order to maintain the ability to go back to your earlier backups. An option to try if you don't care about maintaining the ability to go back, is to delete the existing backup. This would delete the entire backup history and may clear enough space to create a fresh backup. You wouldn't know unless you tried.

Similar Messages

Print & Fax refuses to load or function w/ any programs, Can someone help?

After a hard drive format, re-installation of Snow Leopard, and a Time Machine restore the "Print & Fax" dialogue under System Preferences refuses to open and load. In addition, any program that attemptes to print will also crash. Everything else works fine after the restore.
I reformatted and reinstalled again, I booted in safe mode and repaired permissions, I downloaded printer drivers, I over writed the system preferences with an older version from time machine all to no avail.
Not sure what else to do here. Any suggestions would be greatly appreciated...

I have set the infrared speed to 115,200bps - was 4,000,000bps, might be a little high. I almost only use the IR-connection for synchronizing my Outlook with the phone, so speed is no topic for me.
The IR device is a IBM Think Pad fast infrared-port, driver from National Semiconductor. Hardware Manager also shows: IR transceiver A: IBM SC2H2987, transceiver B: SIR-transceiver.
Anyways, I guess the problem will not show before in a few days, because I have just repaired the Nokia Phone Suite...
But thanks for your suggestions anyway!

Inexplicable paper jams on 4250 printer

Hi Everyone,
I am not able to find the cause of a printer problem. I have two networked laserjets printers (2100 and 4250) on the same network. The 4250 is a new printer and was working fine while the 2100 started having paper jams. Assuming that the 2100 (10 years old) may need cleaning or is having other problems, I removed the 2100 from the network and connected the 4250 to the same network cable. The 4250 began to have the paper jams just like the 2100. I brought both printers to the room where the 4250 was originally connected and each printer worked fine through a parallel port cable direct connection from a computer. I decided to experiment with only the new 4250. I connected the 4250 to the network and it was working fine for more than 10 days until this morning when the same paper jams started to occur. I have unplugged the power, the network cable and restarted the printer several times but the paper jams continue. Another curious thing is that when these paper jams occur, the printer prints more than one copy even though the job requests only one. For example, if I send a test page, the paper jams on the printer below the cartridge. After removing the jammed paper and re-installing the toner cartridge, the printer starts to print another copy and jams each time.
The printer was shutdown and unplugged for more than 20 minutes and then restarted. It still jams even when the job is sent over a parallel port cable direct connection.
I do not if this is normal. Once the printer is restarted and goes through the self-test and intialization, it gives the message Genuine HP Cartridge installed and then says processing job (even though there is no job). The light blinks for a few seconds and then it comes into the Ready state.
Could this be a line voltage problem?
Thank you in advance.
Saleem

I'm assuming you are referring to fairly heavy stock paper. It isn't at all uncommon for consumer level printers to have trouble with heavy (thick & stiff) paper. The problem is two fold: 1) thick paper doesn't bend so it won't feed well through laser printers trays and 2) some heavy stock paper is 'slippery' and the rubber rollers can't grab the paper well so it misfeeds.
In the inexpensive consumer line, inkjet printers tend to work with this paper better than laser printers which have to be manually fed one sheet at a time. More expensive laser printers have a straight through feed option that don't require manual attention.

Paper jam in MX870 printer?

I have a paper jam in my printer, but cannot figure out how to open the back to find it.Can anyone help?

Hi franlynn2, Use the following diagrams to remove paper jams depending on your scenario: Paper Is Jammed in the Paper Output Slot or the Rear TrayRemove the paper following the procedure below.Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier. Reload the paper, and press the OK button on the machine.If you turned off the machine in step 1, all print jobs in the queue are canceled. Reprint if necessary. If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center. Paper Is Jammed inside the Machine at the Transport UnitRemove the paper following the procedure below.Detach the Rear Cover.
Pull the paper out slowly.
Attach the Rear Cover.
Push the left side of the Rear Cover until it is closed completely.
If you were not able to remove the paper out in step 2:Remove the Cassette.
Pull the paper out slowly.
If any paper is sticking out of the Cassette, remove the paper, align and reload the paper in the Cassette.
If you did not remove the jammed paper out in step 1 to 5 when automatic duplex printing, check the duplex transport section.
Insert the Cassette into the machine again, and press the OK button on the machine.If you turned off the machine in step 2, all print jobs in queue are canceled. Reprint if necessary.If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center. Jammed Paper Is Not Removed out When Automatic Duplex PrintingBefore removing the jammed paper, see Paper Is Jammed inside the Machine at the Transport Unit to remove it from Transport Unit. If the paper jam error continues, remove the jammed paper following the procedure below.Turn off the machine, and unplug the power cord of the machine from the power supply.
Remove the Cassette.If the paper is loaded on the Rear Tray, remove the paper from the Rear Tray and retract the Paper Support.
Set the machine upright with the left side down. Slowly pull the jammed paper out so that the paper does not tear.
Align the paper, then reload it in the Cassette.Reload paper in the Rear Tray, if necessary.
Insert the Cassette into the machine again.
Plug the machine back in and turn the machine back on.All print jobs in queue are canceled. Reprint if necessary.If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact the service center. In Other CasesMake sure of the following:Check 1: Are there any foreign objects around the Paper Output Slot?
Check 2: Are there any foreign objects in the Rear Tray?
If there are any foreign objects in the Rear Tray, be sure to turn off the machine, unplug it from the power supply, then remove the foreign object.
Check 3: Is the Rear Cover closed completely?
Check 4: Is the paper curled?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

I am trying to install Kodak printer ESP C310 but it says a firewall is blocking the installation. Can you help?

I am trying to install Kodak printer ESP C310 but it says a firewall is blocking the installation. Can you help?I am using windows XP. I have searched port 5353 and this is enabling Bonjour.

You could check this article, but it is about Firefox itself not having access.
: http://kb.mozillazine.org/Firewalls
Could you provide the exact wording and punctuation of the message, and try Googling that yourself -- when you google leave out unimportant words and punctuations, group words that are still together as in original message within quotes or with hyphens so that google will look for those words together in that order.

HT4356 I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc. How do I print just 1 page out of 14 pages . I don't see any settings on my iPod and can't find settings on the printer . Can someone help with this

I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc.
How do I print just 1 page out of 14 pages .
I don't see any settings on my iPod and can't find settings on the printer .
Can someone help with this problem

Google show that you have to cut what you want to print and then paste it into a new app and print from that app.
http://www.ipadforums.net/new-member-introductions-site-assistance/63145-printin g-one-page-ipad-2-a.html

HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out?

Question
HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out? edit

Thank you for posting your list of installed Extensions. One of them might be intercepting the menu command. Since you have the Add-on Compatibility Reporter, it's possible that an older add-on that doesn't actually work well with Firefox 5 could be to blame. Could you try disabling the "HP Smart Web Printing" extension and see whether that makes any difference?
Also, you can simulate a print button on a web site by pasting this to the location bar and pressing Enter. You also can save it as a bookmark for easier access (when scripts are saved as bookmarks, we call them bookmarklets). Hopefully you won't need it for long.
<br>javascript:void(window.print());

New printer Apple AirPrint - I'm lost, can someone help please, thanks!

Hi, I've just bought an Laser Printer HP1606pn, specifically so that I can print from an ipad, iphone and Mac. I believe that eprint is a new function for this printer but I can't work out what to do as there don't seem to be any specific instructions.
At the moment, I have it set up to work on Windows 7 with a USB cable; however, I haven't a clue what to do to get the Apple products working with it. Can someone help please?
Thanks very much!

Hi there Liz2,
Here are the steps you'll need.
1. Airprint works on wireless or networked printers. Your printer is network capable - meaning, you can plug in a cat-5 ethernet cable from the printer to your home router, and then Apple devices will be to wirelessly connect to it.
2. Once you have it connect to the router, you'll need to update the firmware inside the printer, to enable it's eprint and airprint features.
3. When that is finished, here is the guide for how to print via Airprint: http://h10025.www1.hp.com/ewfrf/wc/document?cc=ca&dlc=en&docname=c02623193&lc=en&product=4110410&tmp...
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

New HP Deskjet 2050 J510 series "paper Jam" won't print

HP Deskjet 2050 J510 series
I purchased this a month ago. I still can get it to print (although it will scan)
It keeps saying there is a paper jam when there isnt!
I am at my wit's end. I have tried everything except taking it back to the store and throwing it at them!
Life was not meant to be this hard !
Any suggedted Fix??
This question was solved.
View Solution.

Hi michaelangelica
Try following the steps outlined in this document
That work?
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Having trouble loading MP-101 paper in Canon MX922 printer- seems to not fit cassette. Any thoughts?

Just bought Canon MX922 printer and having some trouble at setup with MP-101 paper fitting into cassette. Seems too wide to fit in. Am I having spatial orientation issues or is this something others have noted? Thanks

I just did the same thing - The "lower" cassette has two parts - see if you can pull another drawer out below the one you tried - the paper does fit in there... the upper one will just fit envelopes it seems. Stealthy lower drawer!

Very large file 1.6 GB..sports program for school. lots of photos, template where media spots saved and dropped photos in..trying to get it to printer swho says its too large but when reduces size loses all quality...HELP??

Please help...large file my sons Athletic program. Had noto problem with Quality last year..this new printer said file is too large..too many layers, can I FLATTEN..He reduced size and photos look awful. It is 81 pages. Have to have complete before next friday!! Help anyone??

At that size it sounds like you have inserted lots of photos at too large a size and resolution.
Especially for a year book style project, first determine your image sizes and crop and fix the resolution to 300 dpi, then drag them into the publication. Pages does not use external references to files and rapidly grows to quite large size unless you trim and size your images before placement.
Peter

Have a MacBook Air and am connecting wirelessly to a Lexmark x4650. It sends the job to the printer but automatically cancels the print job? Can someone help?

Can someone please help me with this problem?

HP – Printer Not Found During Wireless Installation
HP – Wireless Printing Center
Network Printer Troubleshooting
Try resetting the printing system.
Reset Printing System
Ping printer: If you have the printers IP address open Terminal applications/Utilities and at the prompt type: ping {printerIP}. You will get a reply or failure.
WiFi Printer to WiFi Network - Connect

Can someone help me print wirelessly?

Toshiba laptop running vista 64-bit connected through DLink wireless router.
HP Officejet Pro L7780 All-in-One connected through DLink wireless router.
I can print fine using a wired connection but I want to set it up so I can print wirelessly. When I ran the installation wizard there was a problem in that the IP Addresses of the printer and laptop were not the same. I do not know how to fix this problem (if that even is the problem). Can someone point me in the right direction. I have no patience with crap like this.....**bleep** HP and Toshiba need to make this more seamless.
I don't know how to check, change, etc. the ip address on the laptop. I do know how to check and change it on the printer. However, when I am about to change it on the printer it tells me it will no longer be connected to the wireless network. **bleep** am I supposed to do then? Ridiculous.....
Thanks for any advice you can offer.

OK, let's reset the printer. From the control panel of the printer: Setup > Network > Reset Network Defaults.
Now, from the same Network menu run the Wireless Setup Wizard. Make sure to choose your network, not a neighbor's.
Once the printer is connected to your wireless network, make sure that you are connected to your network on your PC (again, not a neighbor's). Run the HP software on your PC. It should find the printer and connect.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable to print anything off internet w/file-print/nothing happens/but internet explorer does work/but I use firefox more/please help?

when I find something on internet/e-mail/and I go to push on file/scoll down to print/all that happens is nothing.but when I;m on internet explorer it works ok<I use firefox all the time though/is there some kind of setting that I need to set to be able to use my printer on firefox?

Try configuring the printer. You can usually access the printer setup menu by clicking Print on a web page, then click "Properties" when your printer options appear.
Set the page size to A4 in there and maybe choose other settings such as those I've ringed in red in the screenshot. This is my own printer.
Unfortunately, I'm off on vacation from today and my flight departs in about 6 hrs time, so I won't be able to respond again until mid-July. But I'm sure one of the other guys will be able to takeover if your problem persists.

MP-101 paper jams my MG3100 printer. Manual says it should work but it doesn't. Can someone help?

Similar Messages

Maybe you are looking for