.mp3 compressed audio stream dose not play in AIR

Hi All,
We are trying to load stream audio file with mp3 compression in the AIR app using the follwoing code using FLash CS4 -
var snd:Sound = new Sound();
snd.load(new URLRequest(""http://67.159.30.133""));
snd.play();
This works fine when we publish for flashPlayer 9/10. When we try to publish it using AIR the sound dose not play.
We have tested with another approach, where we are loading sound with .flv compression. Here we are using NetConnection and NetStream method to play the sound. With .flv compression it works well in both flash player version as well AIR versions. On the other side when we try to use NetConnection and NetStream method to play .mp3 compressed audio stream it dose not pl when we publish in AIR or flashplayer.
If anyone having any info to play .mp3 compressed format in AIR file will be very much appreciable.
Regards,
Kaushik
[email protected]

While waiting for replies (I don't use xdcam) go to Google and enter
site:forums.adobe.com xdcam
to read other xdcam discussions... one may help

Similar Messages

I have audio books as mp3 files. They will not play on our Ipad. Is there a conversion I need to do?

We have audio books that are converted to mp3 files. They will not play on our 2-year old Ipad. What can I do to make them compatible?
Les

Hi - what I neglected to include in the question is that the book was uploaded on Google Drive. It sounds like I will need to make the book a playlist and upload it.
Thank you for the response.
Les

One of my audio books will not play. My music plays. And my other audio book plays. When I try a listen "the singularity is near", It does nothing. I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning.

One of my audio books will not play. My music plays. And my other audio book plays. When I try a listen "the singularity is near", It does nothing. I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning, and still does play. How do you report a problem with a mandatory apple app?

Audiobooks purchased from Audible.com. They play on iTunes on my computer. They have been playing on my iPod Classic until two days ago. I'm in the middle of two books and now one does not keep track of where I am and the other does not play. I also have other books not playing on the iPod that use to play. They all play on iTunes on my computer.

Audio cd does not play properly

I have an early 2008 macbook with a cd/dvd combo drive. My problem is audio CDs will not play or import properly. The music scratches and pops and sometimes there is no sound at all. When I try to import the audio, sometimes the files will only be 10 seconds long, but the track on the cd is 7 minutes. Also when importing a CD some of the tracks in iTunes say "Not Available" where the length of the track is listed. DVDs, on the other hand, play fine.
I'm not using burned discs. These are brand new audio CDs.

I just started having the same issue, I just got a brand new cd and when I import the cd I get skips and scratches in the music. I just updated to 10.6 today, and I don't know if it is a problem with the new operating system or with my aging machine (most likely my machine because it is a '06 MB). I know it is not the CD because I can play it on my surround sound at home with no skips. Any ideas how to fix the issue?
-Greg-

Although it is demand, or can not support ogg? In it to support Flash IDE, you can not play in AIR SDK.

Although it is demand, or can not support ogg? In it to support Flash IDE, you can not play in AIR SDK.

Looking at this page as an example:
mp3licensing.com - Royalty Rates
the information seems to be six years old. I haven't heard about anyone being sued for not registering their app. I'll ask Adobe for an opinion on this.

Last ~10% of audio clips do not play

My imported music tracks will not play the last approximately 10% of the clip. At first I thought it was a result of trying to use 6-10 minute music clips, as 1-3 minute tracks never seem to fail, but found that even trimming off all but the last minute of a long clip (making a 10 minute clip into a 2 minute clip) and trying to use that resulted in it's last 10% not playing!
The waveform for each audio clip shows up in its Source Tab and is just fine. But scrubbing or playing the clip works only up to about the 90% point and then sound goes silent. This is true for the Source player or when the audio is inserted into the Timeline.
I have converted the original .m4a audio files to both mp3 and wma but always with the same result. All converted clips play fine in both QuickTime and WM Player players, so it is something within CS4 Premier Pro itself that is failing.
I have tried everything I can think of without results, and have run out of ideas.
Any suggestions, anyone?

I agree re: MP3. I seldom use it, but I fell into the trap of thinking that since I was having problems with the captured CD and WMA, that certainly Premier would handle MP3, the most ubiquitous format around, without problems.
So I was really buffaloed when even the MP3 formats failed!
I usually don't do anything in WAV because the files are so large, but that said I have a 1.5 Tb drive so don't know what in the heck I am worried about!
Thanks again.

Flash animation with stream sound not playing in mac

Dear all,
I have made a 5 min animation with stream sound. Its playing perfectly in PC. But in mac, its not playing. Stream sound starts from frame 60. So mac plays the swf plays till 60 frame, after that it pauses. I tried importing different sound format (wav, aif, mp3) and tried with all sound export setting but the problem remain same; its playing only till 60. When i removed the sound, it played till end. Even with event sound, it plays till end. But with stream sound, the problem. The problem is only in mac; in pc its perfect.
I am using VMware Mac OS x leopard in window xp for testing purpose. I tested it in laptop with mac; but the problem is same. What could be the solution?
Thanks in advance. Waiting for solution.
Bhushan Pradhan
spherenepal.com

Dear all, I solved the problem myself. The problem was with the sound driver of mac. After installing sound driver, the problem is gone. Bhushan

Premiere Pro CS3 PCM audio recognized but not playing back

Hello all,
I have an AVI file which uses the Huffyyuv codec and PCM audio. Premier Pro (PP) recognizes the audio, as I see the audip specs in the project pane.
The following are the properties of the source video:
Type: AVI Movie
File Size: 500.2 MB
Image Size: 720 x 400
Pixel Depth: 720
Frame Rate: 25.00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:01:11:09
Average Data Rate: 7.0 MB / second
Pixel Aspect Ratio: 1.0
AVI File details:
Contains 1 video track(s) and 1 audio track(s).
Interleave: 1 : 0.50
Video track 1:
Size is 487.04M bytes (average frame = 287.06K bytes)
There are 1784 keyframes.
Frame rate is 25.00 fps
Frame size is 720 x 400
Depth is 24 bits.
Compressor: 'HFYU', Huffyuv v2.1.1
Audio track 1:
Size is 13.06M bytes
Rate is 48000 samples/sec
Sample size is 16 bits
The audio will play on all media players and also on Windows Movie Maker. But on PP, it does not play in the source monitor or in the timeline.
Any help would be appreciated - Thanks in advance!

Well, the PCM/WAV 48KHz 16-bit should be fine.
Since it is not, something must be afoot. The first thing that I would do is check that that Clip has a CFA and PEK file n the Media Cache folder. If not, then Conforming might not have been allowed to complete, though the Source Monitor should be able to play it, as it relies on the actual source file.
Then, if it's still a no-go, I'd try a Render/Replace for that file's Audio portion.
If that still does not work, if you have Soundbooth, Audition or even the free Audacity, I'd rip the Audio to PCM/WAV 48KHz 16-bit (yes, I know that is what it already is, but something is not working), and Import that resultant file, replacing any Audio stream from the muxed file.
Now, one quick question, and probably should have been asked first - do you get other Audio to play fine in PrPro? If not, see this ARTICLE.
Good luck,
Hunt

Audio stream won't play in Premiere, but does in FCP?

I got some footage to edit from a director who shot the project on the Sony XDCam3. He then converted the footage to MOV's in a software that Sony provides so he could give it to me to edit. He wants the project edited in Premiere Pro 5.5 because that's what he's got on his machine and if he wants to, he'd like to make changes later on. So, the problem is the footage imports fine. The video stream is there and plays, but the audio stream just seems empty. It's there, but no audio. I then tested the same clip in FCP and it works perfectly. Plays fine, video and audio. I'm not sure what the issue is. I'm attaching a screen shot of the specs on the clips if that might help get to the bottom of what my issue is. Thanks so much for any help on this!

While waiting for replies (I don't use xdcam) go to Google and enter
site:forums.adobe.com xdcam
to read other xdcam discussions... one may help

Audio Tracks will not play

Hi there,
I'm using FCP 7 for a project that was originally edited in Final Cut 6 (I had to switch to 7 because BOTH my computers at home have crashed today which use FCP6, now I'm up at my office and have to use 7 - bad day, I know).
I'm trying to do some sound edits and only one audio track is playing (tracks 3 and 4) which are the source audio from the XDCAM Footage (note, these tracks have not been soloed - if that's a word). All my other tracks are not working. When played they produce no sound, but the audio meters to the right are moving. When played in quicktime, iTunes, or Finder they do indeed still work.
Audio Output has been set to Default, though I've also tried Built-in Audio Output. I'm using headphones, but it also does not play through the computer. I've also tried speakers. All other audio on the computer is fine - my volume is up.
Sometimes I can get tracks one and two to play after re-rendering.
RT is set to Unlimited, but it also doesn't work with Safe RT.
Any insight into this issue would be much appreciated!
Thanks

Go to Sequence Settings...then the AUDIO TAB. How many tracks of audio do you have? More than 2 and STEREO?
If you right-click on the track patch area on the timeline, you can assign these tracks to audio ouputs...are they set to anything other than 1 or 2?
Shane

Midi notes or audio region do not play at the start of a bar?

I am having an issue with a midi loop I have created. If I let the song play a bit until it reaches the loop, logic works just as you'd expect it and everything plays correctly. But if I stop the song, or if I set the song into cycle mode so it repeats, the very first note of the midi loop is ignored, and not played.
So for example, if I set the cursor to start at bar 9, the starting point of the loop, the first midi note is not played. But if a set the cursor at bar 8 and let it play into bar 9 and the loop, all of the notes in the loop play correctly.
I found the following description of the same problem on another forum, but it seemed to suggest that there is no fix for this, which if true, seems kinda bad for a pro application. I was wondering if anyone knew of a workaround or fix to this, because its really annoying missing the notes, or having to expand the cycle region just to get all of the notes to play. Here is the text from the other forum:
_Logic doesn't play the very start of my audio regions when I start playback_
Question: If a region starts at e.g. 1 1 1 1, and it starts playing from the same position, it seems that Logic misses the first few samples - which is especially noticeable with fast-attack transients.
Answer: Apparently Logic doesn't use some kind of pre-play buffering. The workaround is to have your entire song start e.g. one bar later, at 2 1 1 1, and let Logic play from 1 1 1 1. This workaround obviously doesn't work if you've set up a cycle - in which case Logic will miss the first samples when it starts playing as well. Next time it loops through the cycle it does play properly. There's no workaround for this - it's a serious shortcoming of the way Logic handles audio playback. With cycles, you could resort to using the Pause instead of the Play button/command: this will let you start playback from somewhere before the start of the cycle instead of starting at cycle-start (which is what Play does).

I'm having the same problem.
one workaround is to change the delay to +1/192=20 in the delay box in inspector on the given midi track...but this is a terrible thing to have to do over and over again.
PLEASE help if you know what's going on.....I ran logic on my macbook and this NEVER happened. I just bought a macbook pro 2.5 and it's apparently now an issue?
I have searched the net for fixes, and none work....logic does have a pre-play buffer, but it's range isnt large enough to buffer the instrument I'm using...which means the range is less than 1/192...come on....that's messed.
If anyone figures this out, please message me back at [email protected]

Audio on Menus not playing

Hi all,
I wonder if anyone can help me.
Using Encore on CS4, I created a project with three motion menus. The text was adapted from an Adobe template and the 'motion'' elements (video and audio) were created in Premiere, saved as an MPEG, imported into Encore as an asset and then alt-dragged to the menus. All of this works well. I then preview and build the motion menus with the preview buttion and everything plays well, the video and the audio (though it would be nice to have some voume control - but that's another story) are great and the menu structure (1st play menu and two subs) play fine. I then build the DVD. Firstly burned directly to DVD, the on subsequent tries as an image and as a folder. On all of them there is no audio on the menus. The timelines that the menus que are fine, the audio works but not on the menus.
In frustration I created a flash file of the same project, and the audio was great. All there. I then went and analysed the DVD folder I created earlier and DVD Shrink found the menus and even found found associated audio as LPCM2-ch but alas, even using this program to compile an .ISO nothing improved.
Any ideas?
Thanks

......... I also do not want them rushing for the remote, to mute loud Menu Audio, only to have to then turn up the Volume, when the DVD plays. I like to "ease" the user into things. I find too many commercial DVD's, where the Menu Audio Volume is about +6dB above the other Audio and hate that. It does get my attention, but in a very bad way. It also scares my Bulldogs!
Good luck,
Hunt
Oh, dear me yes.
The way I have found for menu audio - if you really must have it - is to halve the level from what you think is comfortable, and then set it to loop 20 or 30 times over - you would be surprised at hiw quickly this becomes very annoying.......and now place yourself in your customers shoes.
@ the OP.
As Jeff says, please retry with Dolby DIgital or LPCM, LPCM definitely if you are looping on a tight loop.
MPEG audio is not your friend.

Audio for flv not playing...please help

In Captivate 3 - I have imported an flv of an avatar - the avatar motions and lips are moving yet the associated audio is not playing. When I play the flv out of captivate it works fine. Anyone experience this before, or something similar? Any thoughts, tips, or suggestions. Any direction is greatly appreciated.

Hi there
When does this occur?
When previewing
After publishing
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

MP3s flagged as Audiobook do not play in iOS5

Just upgraded to iOS5, now any MP3 that I have changed the media type to be an audiobook will not play. When I try to play it just goes through all the files on the album and skips through them then dumps me back at the selection screen.
If I change that MP3 to be music, it works fine.
Change it back, it will play once, then never play again.
Anyone else experience this?

I found out the issue isn't with it being tagged as Audiobook but rather it's iTunes that is causing the problem (or maybe how iTunes is tagging them) since when I deleted them on my iPod and used a third party program called "CopyTrans Suite" and it's freeware app that is similar to iTunes Audiobooks worked flawlessly again in iOS 5.
It must be the current version of that program since iOS 5 changed a lot of things and causes older versions to report an error on iPods (when there is nothing actually wrong) and is worth using until iTunes is fixed. (10.5.2 is garbage atm)
You can download this program here: (other apps in suite are trial, but the freeware iTunes like one is all you need)
http://www.copytrans.net/download.php
Worked flawlessly for me so far, and no re-encoding or anything ether. Hope it helps others.

StopAllSounds vs. new Streaming Sound not playing

In my timeline, I'm using a stopAllSounds action (because the
user could be coming from anywhere in the movie and I need to stop
whatever narration might be playing), then, in the next frame, I'm
trying to stream a new sound. My problem is that the streaming
sound doesn't play. I've tried adding a few frames between the
stopAll Sounds action and the start of the streaming sound, but
that doesn't seem to be the problem. Any ideas would be greatly
appreciated.
- BillG

I was about to try your suggestion, but after sending a few more test emails, I discovered that it does in fact play the sound sometimes. I sent about 20 test emails, and they were all received using the "idle" command, with about 75% of them playing the sound. There was a 5-10 second delay between the messages being received and the sound playing that I don't remember from Snow Leopard, but I'm not positive about that.
It shouldn't be the actual sound that is the issue, being that it is played sometimes, but I still don't know why it's not playing every time. I tried receiving messages with the app running in the background, with it minimized, and with it as the active window, but I couldn't find any specific instance that caused it to not play the sound.
I wasn't having this issue in Mail 4. It didn't start until I installed Lion, which I did a clean install of, if it matters.
I'm still open to thoughts on this, and thank you for your help.

.mp3 compressed audio stream dose not play in AIR

Similar Messages

Maybe you are looking for