Mplayer-plugin - anyone can use it?

Could you tell me how to use mplayer-plugin?
Or could you point me to any documentation?
This is example site with movies:
http://www.galaxydynamics.org/cosmic_cruise.html
When I click on avi this plugin just blocks firefox.

The keyboard controls aren't working for me while the video is embedded. If you use the 'noembed=1' option in ~/.mplayer/mplayerplug-in.conf, the video will launch in it's own window and the regular Mplayer controls will work.
As far as the cache goes, it looks like it starts over when the video is stopped then restarted. I'm not sure if this is editable or not.
What do you mean when you say it looks poopy?
Last edited by skottish (2008-03-01 20:32:49)

Similar Messages

I fail to see how anyone can use 10 ipods

I fail to see how anyone can use 10 ipods from the billion download song contest winner thing. Think about it, other than selling them, what would apple have in mind for someone to do with 10 ipods?!

good point but if someone has a LOT of cd's in apple lossless or wav and also if they have a bunch of movies on their computer or music videos

Does anyone can use time capsule without connection breaks?

if I backup more than 100 mb, the connection via wifi breaks and i can not find the time capsule. either i have to restart computer or time capsule. i use mac lion. time capsule 1 st gen, 500 g

Ok .. this is pretty easy.
You plug the WAN port on TC into the N900 LAN port by ethernet.
Open the airport utility on the Mac.
Simply allow it to automatically setup and it should select bridge mode.. if not just jump in at the end .. click on the edit under the summary and go to the network tab and select bridge.
Then go to the wireless tab and make sure you are creating a wireless name.. you can give it the same name as the N900 same security same password.. this is called roaming network.
Or use a different name.. use short, no spaces and pure alphanumeric.
I have given a different name to 5ghz.
It will not matter which wireless you connect to but the TC is faster on the 5ghz for backups.

How to use mplayer-plugin?

How do you use mplayer-plugin in Firefox?
I always just have empty mplayer window or area, when I click "play" I just see "stopped".
I have exactly same effect on two different computers with Arch.
Do I need some special configuration for mplayer-plugin?
What is so special in this plugin that it can't work just by default?

Jacek Poplawski wrote:How do you use mplayer-plugin in Firefox?
I always just have empty mplayer window or area, when I click "play" I just see "stopped".
I have exactly same effect on two different computers with Arch.
Do I need some special configuration for mplayer-plugin?
What is so special in this plugin that it can't work just by default?
It should just work after installing Mplayer and the plugin. If you launch Firefox from a terminal, are you seeing any errors?

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

Your TV hasn't entered some odd picture in picture mode has it with two 'inputs' side by side?
AC

Unable to play video onto my Samsung LCD TV when using a Memorex Mini Soundbar MA5004. Anyone can help?

Unable to play video onto my Samsung LCD TV when using a Memorex Mini Soundbar MA5004. Anyone can help?

Does anything go to the TV? Like can you hear audio?
Dod it ever work?
Does it work with other display devices?
You are using an app that supports TV out?
What does the soudbar have to do with it?

In this report i have marked one line..if this width 30,i need to multiply by a number 0.3 and if the width =30,it multiplies by 0.37...how to use this logic here..??? anyone can help??

In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum desc

Hi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan

I am using iPad 3 and I try to use 30-pin Digital AV adaptor for mirroring on my Samsung HD TV. Unfortunately it is not a full screen projection. Anyone can help?

I am using iPad 3 and I try to use 30-pin Digital AV adaptor for mirroring on my Samsung HD TV. Unfortunately it is not a full screen projection. Anyone can help?

The iPad Screen is almost square, HD TVs are rectangular so will never be full screen. When watching movies, the movies native aspect ratio will be used rather than the iPads screen aspect ratio so will look full screen if the movie is full screen, but most likely will be seen in wide screen letter box format. with black bars across the top and bottom as that what most movies from iTunes are in, format wise

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones
Any clue, how i can add a mail account to apple mail app, but with separate password / pin to open it.
Years ago there was a program called mail switcher which added this functionality, but thats gone.
cheers
Tom

They would have to be logged in as separate users in order not to see your account in Mail. Whatever accounts put in Mail under your account will show up. All mail accounts usually have there own user and password. The only thing you can do is to remove the password from Keychain and take the account offline so you don't keep getting prompts for passwords each time it checks for mail.
Not a great solution.
Best way is to give the other user their own user account with their own mail and enable fast user swithcing to log between the different users if all access the computer frequently.

Hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me

hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me

Making a new Apple ID is not a good idea, since you have to reset the password for that Apple ID anyway. All of your purchases are tied to the Apple ID that the iCloud account was created under. So, you have to retrieve the password for that Apple ID in order to sign into iCloud anyway.
Go to Manage your Apple ID, and click on the Reset Password option (Apple - My Apple ID). Sign on with the Apple ID that the iCloud account was created under, and answer the security questions. If you do not remember the answers to the Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could

Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing it but I have lost my serial number. I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks

Ianp69549740 have you tried reinstalling Photoshop CS5.1? If so do you receive any specific errors? What operating system are you using?

Can anyone help me figure out if i can use my droid to get online with lapdown ?

I am having a very hard time with a certain problem. i am trying to cut cost at home and would like to get rid of my internet service with cable co. i am under the impression that i can use my droid to connect laptop to use online. can anyone please help me step by step with this if it is possible? please email me... thanks, kathryn

what do you think of this...
The FCC orders Verizon Wireless to pay
$1.25 million as settlement to the Treasury. This is just a parcel of the
carrierâ€™s $6.9 billion
revenue
it has gained from the mobile market in the second quarter of this year. The
company is also ordered to notify Google that the objection to the tethering
apps from the Play Store is now off. This means that when new tethering apps
become available in the app store, everyone would be able to download and use
them without additional fees even if they are Verizon
customers.
Verizon will, of course, continue to
charge its customers with their overall data use every month so for those who
have capped data will not be able to enjoy tethering functionality but the ones
with unlimited data plans are the luckiest. The FCCâ€™s ruling made everybody a
winner; consumers under the network would be able to share their connection, app
developers donâ€™t fear of being blocked when releasing tethering apps, and
Verizon can attract more customers to subscribe to their unlimited
plan.
Read more at http://thedroidguy.com/2012/08/fcc-mandates-verizon-to-allow-tethering-apps-on-android-smartphones/#4ea8gkhCZMf0ypQ5.99

I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me?

I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me? Already changed the extension of the excel document to xlsx an now gives an unknown import error.

In Excel have you tried saving directly to xls (not xlsx) and opening the xls in Numbers?
If you have a complicated workbook in Excel that uses lots of Excel's advanced features, Numbers may not be able to handle the import. It does pretty well on basic things, though.
If you're just trying to get data into Numbers, then often copy-paste from Excel is easier than trying to open xls files.
SG

ANYONE KNOW WHAT I CAN USE TO CONNECT MY IPOD NANO TO AN AUX DEVICE SO I CAN LISTEN TO MY MUSIC THROUGH MY STEREO

ANYONE KNOW WHAT I CAN USE TO CONNECT MY IPOD NANO TO AN AUX DEVICE SO I CAN LISTEN TO MY MUSIC THROUGH MY STEREO

Are these messages in the Sent mailbox? If not, they're not coming from your computer.

The scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture.

the scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture. how can i stop safari from showing the content of my accounts?

Try calling Tech Support, they should be able to check to see if theres a lock and try to help you reset it, I had to call and get my account unflagged, for something that I didn't even do.

Mplayer-plugin - anyone can use it?

Similar Messages

Maybe you are looking for