MPxIO-disk physical location in V890

Hi All,
How can I determine the slot position for a disk in a V890 when
using MPxIO. The output from format is:
0. c4t200000186273C6A2d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/scsi_vhci/ssd@g200000186273c6a2
1. c4t200000186273D7CDd0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/scsi_vhci/ssd@g200000186273d7cd
2. c4t200000186273D69Ad0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/scsi_vhci/ssd@g200000186273d69a
3. c4t200000186273D147d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/scsi_vhci/ssd@g200000186273d147
A snip from prtconf -v shows a target number=3 for g200000186273d7cd
Does this tell me that disk 1 from format is in slot 3 (0-3) ?
TIA
Ulf
Paths from multipath bus adapters:
fp#3 (online)
name='node-wwn' type=byte items=8
value=20.00.00.18.62.73.d7.cd
name='port-wwn' type=byte items=8
value=21.00.00.18.62.73.d7.cd
name='target-port' type=string items=1
value='210000186273d7cd'
--> name='target' type=int items=1
--> value=00000003
name='lun' type=int items=1
value=00000000
name='sam-lun' type=int64 items=1
value=0000000000000000
name='path-class' type=string items=1
value='primary'

luxadm has hooks for v880/890's. The internal enclosure(s) are listed in 'ls -l /dev/es'. So a 'luxadm display /dev/es/ses0' will display something similar to :
# luxadm display /dev/es/ses0
SUNWGS INT FCBPL
DISK STATUS
SLOT DISKS (Node WWN)
0 On (O.K.) 20000014c3170198
1 On (O.K.) 20000014c314f432
2 On (O.K.) 20000014c314f2ba
3 On (O.K.) 20000014c314f784
4 On (O.K.) 20000014c314fcbb
5 On (O.K.) 20000014c314fd37
6 On (Login failed)
7 On (Login failed)
8 On (Login failed)
9 On (Login failed)
10 On (Login failed)
11 On (Login failed)
<snipped>
Another nice thing to do is to "blink your LED"
From format I pulled the WWN for disk 1
<snip>
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000014c3170198,0
1. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848> mirror
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000014c314f432,0
<snip>
Then ran 'luxadm led_blink 21000014c314f432'
This will flash the disk icon LED on your v890's disk of choise.
Have fun,
Tom de

Similar Messages

Kernel panic in paticular physical location only

overview: Mac always crashes with kernel panic in particular physical location, but everywhere else it has never crashed.
In an office I recently visited, my Macbook Pro exhibited this behaviour:
when starting up, it crashed with a kernel panic (curtain falls, asks to reboot in various languages). If start up in safe mode, then it works fine. Starting up in single user mode and running fsck reported no problems. Starting up from system DVD and running disk tools repair also reports no problems. But normal startup still fails in same way. I then did a new OS install from DVD and problem persisted then as well.
note that machine is using bootcamp, and I could successfully boot into Windows in the above location.
In every other physical location I have tried, the laptop behaves normally. I cannot replicate the above behaviour anywhere else; but at the above location, it will always crash.
In the said location the computer will crash with no physical connection to anything: no power, no network cable, no peripherals.
The only thing that might be regarded as odd about the above location that I could find, is that there were a number of wireless networks visible, around 10 or 12.
Could it be that the mere presense of the wireless networks is causing the kernel panic?
Macbook Pro Intel Core 2 duo Mac OS X (10.4.8)

thanks for your post
More likely that the wireless router you are
connecting to in that location doesn't have an
upgraded firmware. Mind you, there is an upgraded
software for the MacBook Pro wireless which may
help:
http://www.apple.com/support/downloads/airportupdate20
06002.html
i don't know what wireless networks were there. It is possible there was an apple router but unlikely
If that does not help, run the hardware test that
came with your machine:
http://docs.info.apple.com/article.html?artnum=303081
yes, that is something I haven't yet done, but will be doing tonight
ANd if that does not help, call AppleCare:
http://www.apple.com/contact/phone_contacts.html
already contacted them to let them know

Two environments to the same physical location

May I open two environments (one readonly and one with write access) to the same physical location on the disk?
I think to use the one with readonly access as consumer of data but the second as manager and provider of data.
Both environments will be established by different processes (applications) or VMs.
Is there any special order (sequence) to open them or there is not any.
Thanks.

Hi,
First, please see this documentation about read-only processes:
http://www.oracle.com/technology/documentation/berkeley-db/je/GettingStartedGuide/multiprocess.html
Read-only processes are very limited because changes made by the writer process are not automatically seen by the reader process, as described in the 3rd bullet of the documentation. To get around this limitation, replication can be used. Replica processes do see changes made by the writer process. For information on replication see:
http://www.oracle.com/technology/documentation/berkeley-db/je/ReplicationGuide/index.html
--mark

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15 years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

Hi bookchic
Thanks for your feedback.
Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
Kind regards
Bev

Hyperlink - The physical location in the page

When I export the A PDF file, how do I know the physical location of the hyperlink in the output page (coordinates)
I need to export from Indesign
- Hyperlink physical location (# page & XY coordinates)
TIA

I guess I'm misunderstanding the question, then.
I don't quite understand what you're trying to accomplish with this task. How does Excel factor into this? What value is it to have a report of x and y coordinates for an Acrobat page? This sounds like something you'd need for html coding, not a print document. If so, the pages should be exported as html pages, not Acrobat pdf files, from your original. I only ask because I have a feeling you might be creating way more work or expense for yourself than you need to be. The more information you can provide, the better advice you'll probably get.
If you need a report of x and y coordinates, I'm thinking Acrobat is the wrong application. It's not really a web design app. I don't have Dreamweaver here at my office, but I seem to remember that all that information is available if you open your pages in Dreamweaver, and there may be a way of extracting a report with just what you need. You might try asking your question on the Dreamweaver forum, if that's the route that makes more sense for what you're trying to do.

I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

Exactly what do you mean by a 'downloader'?
Thanks
Pete

How to Setup a JSP to Run on Different Physical Location than OC4J Defaul

I am trying to setup a development environment for jsp application development in Oracle 9ias Release 2 for a development group. I followed the steps outlined in NOTe:167960.1 using both EM Website (creating a OC4J and editing server.xml and defau*.xml files) and DCMCTL (Doc ID: 185635.1) utility. OC4J app is coming up only partially which does not work.
Is this possible to "Setup a JSP to Run on Different Physical Location than OC4J Default Home" in Oracle 9ias Release 2 ?
Appreciate insight
Thanks
Subu

I was finally able to get it up and running... I commented out all the apple specific lines in smb.conf until I was able to successfully finish the driver copy process via the Windows driver wizard. The line in the /etc/smb.conf which was causing this weird problem was:
vfs objects = notify_kqueue,darwinacl,darwin_streams
I have no idea what this line is about. However after commenting it out the driver installation immediately started to work. I cross checked it by adding the line again and viola the problem was back - so it can be broken down to this line...
As I've found some other comments to this line in the internet I guess I will go for the smb.conf changes described in this article:
http://blog.djmnet.org/2009/02/09/macs-needing-unix-network-geekery/
Cheers
jogi4mac

Duplicate entries in iTunes display, but both entries point to the same physical location.

I've seen lots of discussion about how to remove duplicate copies of the same song, but my issue is different.
iTunes has duplicate entries in its database, but if I do show in finder, then both entries point to the same physical location.
If I delete one entry, then the other entry becomes unusable.
Any idea how I could clean this up? Its annoying because if I select an album to play, then each song gets played twice.

@zoo_bink I too have exactly the same issue however it's not affecting all my files.
One solution, which I'm contemplating, is to backup the iTunes Media folder, delete files, uninstall/reinstall iTunes then re-import the files. The issue may have arisen during initial import. (I'm not sure at this stage if Apple allow iTunes to be uninstalled.)
iTunes music collection is showing 58.95GB versus 57.11GB in Finder so it's not a massive deal but annoying nonetheless as deleting entries isn't an option.
Any suggestions welcome.
MacBook Pro, OS X 10.9.1, iTunes 11.1.3 (8)

Physical location of hyperlinked files when generating printed documentation from webhelp project

Hi,
I produce webhelp and the customers have requested that printed documentation is also generated from my help project so that they can have an electronic/paper version.
I have several hyperlinks in the help project, to PDF/Word files, and have found that in the printed documentation, when you click on the hyperlink, it is trying to find the document in the physical location from which the help project was created. This means that the hyperlinked documents only open on my PC because I own the physical location. Other users, particuarly our customers, end up with an error message because it is trying to find a location they do not have access to.
Does anybody know a solution to this please?

The problem with links inside PDF / Word files is that you have no control over where the files reside. Therefore you can't specify a path that will work as it depends on the physical file's location. What you could do is publish the PDFs / Word files to an online location that are accessible by a URL.

Find the Physical Location of an attachment

Hi,
One of the user's has attached a 'Test Document' in FB03/FB02 transaction. When I try to view the document (word document), it shows up. I need to know where this particular document is PHYSICALLY stored in SAP.
I tried to debug and got some indirect references, but I could not find a place where exactly this document is stored in SAP/UNIX. Even finding out a UNIX path (if it is being stored in UNIX and called by reference) would be helpful.

Srinivas,
It was a great surprise to see you in the forum.
I don't know the logical/physical location. I am trying to figure out if any of the function modules or classes gives me the reference or link to any logical or physical location.
I have debugged the SAP code, but could not find any place where the location is stored. I was ending up going to tables storing the document ID or folder ID (ex: SOFD).
Does anyone of you know if there is a way to find the logical or physical location based on the document ID or folder ID.
Ville, I don't think going to AL11 will help me in anyway without my knowing either the logical or physical location. Still, I will give it a shot and see if it is helpful.

User Photo physical location in Who Is Who iView

Hi ,
Could you please let me know where will be the user photo physical location after uploading with Who Is Who iView.
Thanks

Hi,
from UserPhotoService class I can see method getPhoto, where:
public InputStream getPhoto(String uniqueID, String type) {
IUser user = getReadOnlyUser(uniqueID);
byte photo[] = user.getBinaryAttribute("com.sap.ip.collaboration.ume", "photo" + type);
return new ByteArrayInputStream(photo);
So I would assume, that the photo is uploaded into the UME.
Romano

The storage where the virtual hard disk is located does not support virtual disk sharing

Hi everyone,
I deployed 2 hyper v vitual machines a while ago, and i did that because I needed to test my current game Project, which is an
online game. However, i've had some problems with my Windows installation then I had to reset the pc by making it a refresh
install. I still have the hyper v virtual disks, but i cannot attach it to a new hyper-v virtual machine. it pops up this message:
"the storage
where the virtual hard disk is located does not support virtual disk sharing". I dont know anything about virtual machines, so I
didnt know I had to make the disk sharable. How can I force to attach the hard disk to a new hyper-v? I dont want to go t
hrough the whole proccess of installing the operating system all over again and updating it....
Any help is greatly appreciated!
Thanks in advance,
Romulo Romero

Hi MrDebugging,
>>
When I Try to add a SCSI Controller, and then I click browse to add a UNC I get this:
C:\Users\Public\Documents\Hyper-V\Virtual hard disks\ClienMachine.vhdx
but I tried placing in different location, and the same problem occurs!
By the way, Im not on a server , I am a domestic user and I am running it on my
Windows 8.1
According to the error message , it seems that it is not a permission issue .
The VM is Gen 1 or Gen2 ?
Generally the error message occurs when you enable "shared vhdx" on standalone/client hyper-v host :
Please try to attach the VHDx file to IDE controller if it is a Gen 1 virtual machine (because only the SCSI controller has the option "virtual hard disk sharing" and Gen 1 VM only can boot from IDE )
All in all , please do not use this feature without CSV or Scale-Out File Server with SMB 3.0 on file-based storage .
If it is not the case , please detail steps what you did .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Where are the users startup items physically located?

Hi all
I messed around with my login items as I had a startup problem (very slow startup). I 've deleted the Microsoft AU Deamon, now I want to reinstall it from a backup - but where is the thing???
Where are the users login items physically located?
Thanks
Simon

Where are the users login items physically located?
The physical login item process could be located any where. Your ~/Library/Preferences/loginwindow.plist initiates login applications or processes.

Best Physical Location for AEBS

By the end of the summer I plan on upgrading my old Airport base station to the current model. What is the consensus on the best physical location for the station? We have a two-story brick home with a basement and I plan on using the AEBS for wireless and as a router to my computer, Directv receiver and gaming system. The easiest install would be for me to mount it between the floor joists in the basement (the basement "ceiling"), however I don't know if that will severely restrict the range. I could install it in a closet on the first floor, but would need to run a phone line, cat5e cable and power to make it work.
We are really only looking to have the wi-fi available within the structure of the house and maybe the back yard- not the entire neighborhood.

As a follow up, here's what I ended up doing:
I mounted my AEBS in a first-floor closet located in the middle of our home. Since the AEBS has three ethernet ports out, I ran cat5e cable to the 1st floor Directv receiver, the office and the basement gaming system. The only things running wirelessly at this point is the Wii, my old G4 iBook, my son's DSi and a couple of iPod Touch's. The range is good and I've found no dead spots within our home or our yard.

Boundaries and Boundary Groups - 300 Physical locations

Hey guys -
I'm going to be deploying 300 or so Pull DP's across our environment. For the most part, it's one Pull-DP per physical location, with very little overlap. Only one site.
Based on what I'm reading, I'll need 300 Boundaries and 300 (seemingly identical) Boundary Groups, with one boundary per group. Am I getting this right? It doesn't seem that the new "Boundary Groups" really offers any benefits to us,
unless I am missing something; it's simply extra work for us.
Please correct me if I'm wrong though, and thanks!

Hi,
You are correct you need a Boundary and a Boundary Group per Pull DP. Boundary groups makes it possible to use a boundary for Site assignment or Content location and you can reuse the boundaries created.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

MPxIO-disk physical location in V890

Similar Messages

Maybe you are looking for