User Photo physical location in Who Is Who iView

Hi ,
Could you please let me know where will be the user photo physical location after uploading with Who Is Who iView.
Thanks

Hi,
from UserPhotoService class I can see method getPhoto, where:
public InputStream getPhoto(String uniqueID, String type)  {
IUser user = getReadOnlyUser(uniqueID);
byte photo[] = user.getBinaryAttribute("com.sap.ip.collaboration.ume", "photo" + type);
return new ByteArrayInputStream(photo);
So I would assume, that the photo is uploaded into the UME.
Romano

Similar Messages

  • I have several users in an exchange environment who cannot email a photo from the iPhone.  When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place.  How do I remediate this?

    I have several users in an exchange environment who cannot email a photo from the iPhone.  When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place.  How do I remediate this?  Not all of the users in our environment have this issue.  If the users having this issue, install a secondary email account, Gmail, Hotmail, etc, then they can send through those accounts.  Why would the exchange account not be seen to send photos?

    Sounds like it worked until the policies associated with the account that are creating the problem were fully pushed down.
    Try setting up a new (test) Exhange account and see if it behaves the same way on the phone (after removing the problem account from the phone, of course).

  • Employee Photo in Who's Who iView

    Dear all,
    I need to display the employee photo in the ESS (Webdynpro) Who's who iView. Please let me know whether I can use KM for storing the employee photos and displaying it in Who's Who iView. If possible please let me know the config steps / guide regd the same.
    Thanks,
    Vasu

    Dear all,
    Thanks for the reply. Actually i need to display the  photo in Who's who iView(com.sap.pct.erp.ess.whoiswho iView) which is in ESS business package . Since we don't have content server in our landscape, Please let me know how we can configure the Who's who iView(com.sap.pct.erp.ess.whoiswho iView)  to display the photo from KM.
    Thanks in advance,
    Vasu

  • How do I hide my photos from my children who are registered to my account

    How do I hide my photos from my children who are registered on my account

    I am not sure of any privacy settings for photo share.
    The only option would be to not use photo share, but instead to use iCloud photo share, that way you can choose to share or not.

  • Display photo in Who's Who iview.

    Hello friends,
               I want to display photo of employee i who's who iview.
    We are uploading photo in portal but we uploaded it on ECC 6.0 in infotype 0002. Also i have checked all customization in ptarq. On development client employees photo displays but on production it was not showing.
              Can any body help and please tell me what is the problem.
    Thanks,

    Thanx Chris  for your reply.
          I have uploaded photo on my R/3 production server and i can see it in PA30.
          Also i inform u that i can see photo on development client also where i have also uploaded photo.
          So please tell me correct solution.
    Once again thanx.

  • Where are the users startup items physically located?

    Hi all
    I messed around with my login items as I had a startup problem (very slow startup). I 've deleted the Microsoft AU Deamon, now I want to reinstall it from a backup - but where is the thing???
    Where are the users login items physically located?
    Thanks
    Simon

    Where are the users login items physically located?
    The physical login item process could be located any where. Your ~/Library/Preferences/loginwindow.plist initiates login applications or processes.

  • How do I locate someone who can write some scripts and plugins for Illustrator CC?

    How do I locate someone who can write some scripts and plugins for Illustrator CC?

    I just wanted to add a screen shot of the dialog showing the sound in question.

  • HT201493 how to locate family who use the same account?

    how do you use "find my friends" app to locate family who share the same account on all the devices?

    You won't be able to as the app sees each ID as a single "person".  To locate family members they will all need to have a separate Apple ID for Find My Friends.  Note: you can continue to share the same ID for purchasing and other services; it does not need ot be the same a the ID used for Find My Friends.

  • AD stored user Photos do not display in Lync for Mac 2011

    I'm using Lync for Mac 2011 14.0.9 and the my user photo as well as the photos of other users who are using photos stored in our AD do not display.  This behaviour has been occurring at least since 14.0.5.  The behaviour occurs regardless of whether
    I sign in using Kerberos or name / Password.  This behaviour is common for all our Mac lync users. The only photos that display are ones from windows lync users that have chosen to use a photo that is stored on the internet somewhere.
    The Lync for Mac 2011 client is running against Lync Server 2010 and Exchange 2010 servers.
    I also have the common problem that I cannot search the global address book for lync users.  Maybe this is related but none of the reports I've seen about the address book search have mentioned anything about photos not displaying. 
    Anyone Experience similar issues or know where I could start to find the problem with the contacts display?  It used to work correctly way back in 14.0.2 and subsequently an update around 14.0.5 killed the features for me.
    Oh and the Mac is running OSX 10.9 but the issues also occurred in OSX 10.8
    Thanks!

    Hi,
    Did you choose “Show a picture from a web address” on Windows Lync 2010 client? If yes, on Windows Lync 2010 client, choose “Default corporate picture” instead of “Show a picture from a web address”. Then open Lync 2011 on Mac computer to test the issue.
    The choose will sync to all Lync clients for the same Lync account.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Mass upload of user photos in EP

    Hi All,
    I have to do a mass upload of user photos in EP. I tried it in two ways.
    1.     In a network folder say
    173.XX.XX.XXUserPhotos, I stored the photos and then I used the Mass photo upload iview, which is available inside collaboration demo role.
    2.     I created a new task and given the below parameters,
    1.     Task nameà MyPhotUpload
    2.     Upload from folder à
    173.XX.XX.XXUserPhotos
    3.     Photo Typeà NORMAL
    I clicked on save and then I run the task. I didnu2019t got any errors, at the same time I didnu2019t got any output also.
    Then I tried it this way.
    I created a nework path in System Administration à System Configuration à KM à CMà Global Services à Network Path (really sorry if I am being stupid)
    Here I specified the network path and the login credential required to access this folder and named this network path as u201CMyNetWrkPathu201D
    Now, I came back to mass upload ivew, there I deleted the old task and created a new task with
    a.     Task Name à MyPhotoUpload2
    b.     Upload from folder à MyNetWrkPath
    c.     Photo Typeà NORMAL
    I clicked on Save and then I run the task. Again the same result. No errors no success.
    PS: I already specified the photo type check and photo size check in System Administration à System Configuration à KM à CMà Global Services àUserPhoto
    Somebody please help me.
    Regards,
    SrinivaS

    Hi,
    it seems the portal doesn't have permissions to read contents from this physical folder.
    Try to import a sample photo with "apply checked conditions" unchecked in mass upload iView.
    If that doesn't help then try to increase the trace level to INFO for this app in Visual Administrator and see what is causing
    the problems.
    The location is com.sap.netweaver.kmc.people.photo.admin .
    Eventuallly try to import files from local folder instead of network share.
    Hope this helps.
    Regards,
    Ladislav

  • User photo upload

    Hi experts,
    How do i upload user photo for the first time.
    any bodyhelp me on this.
    Advance thank you,
    Vijay

    Hi
    Can  you see the name of the person who modifies the document.
    when you click on the name, the Who's Who iview will open.
    If photo is uploaded you can see the person's photo
    Check these links also
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/95f6409daddb12e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/95f6409daddb12e10000000a155106/frameset.htm</a>
    Hope this will help you
    Regards
    Aparnna

  • I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

    I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15  years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

    Hi bookchic
    Thanks for your feedback.
    Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
    For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
    If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
    Kind regards
    Bev

  • Kernel panic in paticular physical location only

    overview: Mac always crashes with kernel panic in particular physical location, but everywhere else it has never crashed.
    In an office I recently visited, my Macbook Pro exhibited this behaviour:
    when starting up, it crashed with a kernel panic (curtain falls, asks to reboot in various languages). If start up in safe mode, then it works fine. Starting up in single user mode and running fsck reported no problems. Starting up from system DVD and running disk tools repair also reports no problems. But normal startup still fails in same way. I then did a new OS install from DVD and problem persisted then as well.
    note that machine is using bootcamp, and I could successfully boot into Windows in the above location.
    In every other physical location I have tried, the laptop behaves normally. I cannot replicate the above behaviour anywhere else; but at the above location, it will always crash.
    In the said location the computer will crash with no physical connection to anything: no power, no network cable, no peripherals.
    The only thing that might be regarded as odd about the above location that I could find, is that there were a number of wireless networks visible, around 10 or 12.
    Could it be that the mere presense of the wireless networks is causing the kernel panic?
    Macbook Pro Intel Core 2 duo   Mac OS X (10.4.8)  

    thanks for your post
    More likely that the wireless router you are
    connecting to in that location doesn't have an
    upgraded firmware. Mind you, there is an upgraded
    software for the MacBook Pro wireless which may
    help:
    http://www.apple.com/support/downloads/airportupdate20
    06002.html
    i don't know what wireless networks were there. It is possible there was an apple router but unlikely
    If that does not help, run the hardware test that
    came with your machine:
    http://docs.info.apple.com/article.html?artnum=303081
    yes, that is something I haven't yet done, but will be doing tonight
    ANd if that does not help, call AppleCare:
    http://www.apple.com/contact/phone_contacts.html
    already contacted them to let them know

  • Preparation failed in trex when using standard Who's who iview

    Hi,
    I have encountered a problem with the standard Who's who iview, which makes a simple search in the ume impossible.
    All users "preparation fails" with the following error from Trex monitor > Display queue entries:
    Document ID: /ume/users/USER.PRIVATE_DATASOURCE.un%3Ar5mas.usr, Return Code: 16040, Return Message: SSL: rc=-40 pse_error, Document Status: Prepration failed, Action: Index, Retry Count: 3.
    I'm working on Netweaver '04, stack 9, installed from rapid installer.
    Any help is greatly appreciated.
    Regards,
    Martin
    Message was edited by: Martin Søgaard

    Just in case anyone happens to stumble across this thread via search, the error 16040 means that your user doesn't have permission to read the PSE it's trying to open. You'll get errors like this in one of your trace files:
    [Thr 1224] =================================================
    [Thr 1224] = SSL Initialization  on  PC with Windows NT
    [Thr 1224] =   (710_REL,Jul 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
    [Thr 1224] =   found SAPCRYPTOLIB  5.5.5C pl36  (Jul  3 2013) MT,[aesni],NB
    [Thr 1224] =   current UserID: SAPDOMAIN\SAPServiceSID
    [Thr 1224] =   found SECUDIR environment variable
    [Thr 1224] =   using SECUDIR=E:\usr\sap\SID\TRX00\sec
    [Thr 1224] *** ERROR =>   secudessl_Create_SSL_CTX():  PSE "SAPSSLS.pse" not found! [ssslsecu.c   1354]
    [Thr 1224] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
    [Thr 1224]   secude_error 1281 (0x00000501) = "open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned"
    [Thr 1224] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
    [Thr 1224] ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in af_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
    [Thr 1224] << ---------- End of Secude-SSL Errorstack ----------
    [Thr 1224] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "SAPSSLS.pse" [ssslxxi.c    2278]
    [Thr 1224] *** ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 1224] =================================================

  • Physical location of hyperlinked files when generating printed documentation from webhelp project

    Hi,
    I produce webhelp and the customers have requested that printed documentation is also generated from my help project so that they can have an electronic/paper version.
    I have several hyperlinks in the help project, to PDF/Word files, and have found that in the printed documentation, when you click on the hyperlink, it is trying to find the document in the physical location from which the help project was created. This means that the hyperlinked documents only open on my PC because I own the physical location. Other users, particuarly our customers, end up with an error message because it is trying to find a location they do not have access to.
    Does anybody know a solution to this please?

    The problem with links inside PDF / Word files is that you have no control over where the files reside. Therefore you can't specify a path that will work as it depends on the physical file's location. What you could do is publish the PDFs / Word files to an online location that are accessible by a URL.

Maybe you are looking for