MRBR: Still showing invoices that have been paid

Hello SAP Guru's
After some research, I found out that my users have been releasing orders manually through FBL1N by removing the Payment Block manually. Why are they showing under MRBR still? Shouldn't they fall off?
Thanks!

Hi AMS,
Did you get your answer from another thread??
From our experience . . . MRBR is part of the MM module and it feeds into the FI Module which is where FBL1n resides. We only use FBL1n to clear non PO related blocked invoices(like those from FB60 or FBD1). If you clear in MRBR first then FBL1n will show the invoice as UNBLOCKED, too because MM flows into FI (but not the opposite way). That's why those cleared via FBL1n doesn't clear MRBR.
You should also note that if you do a MR11 maintenance clearing where the invoice was entered before the GR and the MR11 mimics the GR, then MRBR will autoclear. We have MRBR set up to run as a batch job several times a day to unblock those invoices where there is now a 3 way match.
Cindy

Similar Messages

Cost settlement only for assets that have been paid

Dear all,
i need to do, at the end of the month, the cost settlement from wbs to asset only for the the part of asset that have been paid.
I don' t know how to do this using standard sap funcionalities.
Theonly way that we think to use is:
- setlle of the entire wbs
- transfer posting (FI) from asset to wbs of the part that have not been paid.
Some of you can help me?
thanks
Elena

Hello friend,
Because I do not understand your requirement to capitalize from AuC to final asset only only those costs for goods/service that have been paid - I would like to give warning that you may not have the requirement correct.
This would not be your fault, but the fault of the accounting users giving you the requirement is my guess.
Receiving against PO may be MIGO, and then posting the vendor's invoice later on when it's received, is MIRO usually.
The actual payment to the vendor is a subsequent posting known as a check cut. The accounting for a check cut does not create the AuC value, nor does it meet any accounting requirement for capitalization.
The accounting requirement for capitalization in almost all countries would be MIGO. Because we have posted the receipt of goods or services, we now owe a vendor somewhere. The liability will be in your non-specific vendor account, GR/IR which stands for Good Received/Invoice Received. MIRO clears out the amount from your GR/IR account, moving it to your reconciling account in the g/l for a specific vendor sub-ledger account. The check cut then removes specific liability from reconciling account, and removes cash from g/l cash account.
Recognizing that we owe the cost of the goods receipt MIGO, it is already fair and required to capitalize the costs to final assets and commence depreciation expense (assumption you have placed the capital fixed assets into service).
So, neither MIRO nor check cut should delay your capitalization from AuC to final completed assets unless your requirement is different that SAP basic scenario. Regards

Print Preview shows items that have been deleted?

Hello folks.
This is a weird problem a switcher friend of mine is having.
Let's say they have three events on the 12th. They choose to print the month view of their iCal window. In the Print preview on iCal (where you can select all kinds of options for printing, like the size of the text, which calendars to print, etc) all sorts of events and appointments show up on the 12th that have been deleted or no longer exist.
I tried reimporting the calendars, deleting the iCal cache, etc.
Does anybody know a workaround for this? I am thinking this is a bug, but wanted to see if anybody else has seen this.
This is on a 2.1 G5 iMac with all updates and no hacks.
Thanks!

Anyone?

How to view Goods Receipts that have been paid

Hi Experts,
We use SAP Business ONE 2007A PL08. I am wondering what is the procedure to view the goods receipts for which payments have been made.
When I go Puchasing AP-->Goods Receipt PO, I put an asterix in the number and I am not sure what to select for the status. There are different kinds of status. Open, Open-Printed, Closed, Cancelled, Unapproved, Paid, Delivered etc.
When I chose the paid, it gave me a list with open goods receipt and so I guess that is not the option. When I chose closed, it gave me a list of closed goods receipts and I pulled up a column named "Paid (SC)" and I could see the status as closed and I could see the payments made against it.
So does the "closed goods receipts" mean that they are paid or am I missing something? Then what is the meaning of the status that says "Paid" then?
Please let me know!!
Thanks

Hi Arun,
Try this...
Select T3.DocNum 'Grpo No', T3.DocDate 'GrPo Dt',
T0.DocNum 'AP Inv No', T0.DocDate 'AP Inv Dt', T0.DocDueDate, T0.CardCode, T0.CardName,
T0.DocTotal, T0.PaidToDate From OPCH T0
Inner Join Pch1 T1 on T0.Docentry=T1.Docentry
Inner Join Pdn1 T2 on T1.Baseentry=T2.Docentry and T1.Baseline=T2.LineNum
Inner Join Opdn T3 on T2.Docentry=T3.Docentry
Where T0.PaidToDate>0
Regards,
Sachin

AppStore suggestion .. a tabe showing apps that have been deleted that have

.. like it says in the title.
This would be useful for apps I try but don't work, get deleted, but subsequently get an update. this could be a tab up next to iPad Upgrades or something like that.

Submit your feedbacknto Apple here:
http://www.apple.com/feedback

Sales orders that have been invoiced are still in the Billing due list

Friends :
We have sales orders that have been invoiced are still in the Billing due list. When i look at sales orders it has 0.00 price.
The error message is
Billing not possible because repair is not yet completed
The item is not relevant for billing
The item has been fully invoiced already
Full pints will be given.
Van bills

Hello,
I believe these are repair orders, and invoices through order related billing. Check the incompletion log in the order, check whether the repair is complete. Go to the order VA02 --> Order ---> Environment --> Status. You may know the over all status of the document. Check for the billing status, if the billing status is not invoiced, then you need to generate invoice or Reject the line item.
Prase

When I open a pdf document from my dropbox to view it, the document shows up blank, even though it is filled out. This also happened with pdf documents that have been e-mailed to me.

When I open a pdf document from my dropbox to view it, the document appears blank, even though I know the information is actually there. This also has happened with pdf documents that have been e-mailed to me, then opened to view and they are blank?? Why are they showing up blank?

When I open emails with PDFs I click on the attachment (doing this all on my iPad) it gives me the option to "open in iBooks", I accept then after that the document is sucked into my iPad but I can't do anything with the PDF after that. Where is the actual file on my iPad? Why can't I email or send these PDFs to my cloud (Dropbox)?
It's like once they go into iBooks they're stuck forever.

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

I have been saving photos that have been emailed to me. They show up in the camera roll and then I put them in separate albums. My camera roll when I try to open it freezes and the thumbprints are a jumbled and blurred. This is on my ipad.

I have been saving photos that have been emailed to me on my ipad. They show up in the camera roll, but when I open the camera roll the thumbprints are jumbled and blurred and frozen. I can't get out of there unless I shut my ipad down and restart it. I can use other parts of my ipad ,but my camera roll remains frozen....help!

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

How can i remove items from list that have been deleted when i click on them it keeps showing empty

how can i remove items from the list that have been deleted when i click on them it keeps showing folder empty

Actually, Reader SHOULD keep showing documents that no longer exist, I disagree. It's no big deal, and people will quickly realise why they can't open the file. They open more files, the old ones move off.
The REASON why it should not check is that checking whether a file exists can take a long time when things aren't good. For instance if a file server goes down, or a memory card is unplugged. That in turn would mean delays opening the File menu, and I've seen some software that can sit there for several minutes. That would really give people something of which to complain...

Just invoices that have not been credited

Is there a view or query around that will just return invoices that have not been credited?
I know that transactions can be reversed and an entry is made int the credited field such as:
SELECT rct.trx_number invoice_number, pdi.draft_invoice_num,
pdi.draft_invoice_num_credited, rct.trx_number
FROM pa_draft_invoices_all pdi, ra_customer_trx_all rct
WHERE rct.trx_number = pdi.ra_invoice_number
but I want to return a 'N' if the transaction has been credited or a 'Y' if it has...
Thanks

john95127
Put this query in the appropriate forum. General EBS forum General EBS Discussion might be a good place.
--Shiv

Is there a way to print something showing all the purchases that have been made and what the total cost is?

Is there a way to print something showing all the purchases that have been made and what the total cost is?

While it is not possible to directly print your iTunes account purchase history within the iTunes Store, you can take a screnshot of your purchase history on your computer, and then print that screenshot.
The following article explains how to review your purchase history:
http://support.apple.com/kb/HT2727
This articles explains how to take a screenshot on Mac OS X:
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26782.html
and this does on windows:
http://windows.microsoft.com/en-CA/windows-xp/help/setup/take-a-screen-shot

Photos that have been deleted to aperture trash cannot be viewed. Any assistance is welcome in fixing this bug. The showing all files option is selected in the filter. System is 10.8.4, aperture version 3.4.5

Photos that have been deleted to aperture trash cannot be viewed. Any assistance is welcome in fixing this bug. The showing all files option is selected in the filter. System is 10.8.4. Aperture version 3.4.5. Used to be able to view the files then all of a sudden they have stop appearing. Once the aperture trash is emptied the files can be viewed in the system trash. Becomes quite annoying if you want to review the aperture trash files before deletion.

Photos that have been deleted to aperture trash cannot be viewed ...
The showing all files option is selected in the filter.
Cookiemonster, previously Frank Caggiano's magic helped in this situation - have you tried the double, double Caggiano as described here?
Images not appearing in browser, search filter is cleared
https://discussions.apple.com/docs/DOC-3062
In the most recent version I cannot get this trick to work, however. But try it anyway, maybe it is just my macthat has an issue.
Did this happen directly after the update? Where is your library located, on an external or an internal drive? Are your originals managed or referenced?
I'd try next to check, if this is caused by the library, by creating a small test library and trying to trash pictures there. If it works well in a new library try to repair the database and the permissions on your regular library. See:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=27%26se ction=10%26tasks=true
Regards
Léonie

How to post invoices in AP that has been paid by employess and make corr

Hi Guys,
Do you know how to correct book AP invoice in Oracle 11i that has been paid by employees and how to make correct reconciliations in the books on Supplier and Employees side? Employee paid by cash for AP invoice that has been borrowed to him from company.
Thanks
Karol
.

if this is a normal practice in your organization, then you can do the following:
1-define a natural account in COA for this employee.
2-create a bank account for payable and use this account as cash account.
3-make payment from this bank account for supplier invoice paid by the employee.
4-when making payment to employee, enter a Standard invoice while selecting employee as supplier and in distribution select account defined in step#1 and make payment of this invoice form actual bank or cash account created as bank in your application.
i hope this will solve your purpose.
Rgds,
Fahd

HT201320 i have set up my email on have (7) messages on the mail icon but when i press it the home screen comes up to set up a new email. Where can i find the emails that have been downloaded...again, it shows that i have 7 new emails??

I have set up my email on the iphone. On the mail icon it shows that i have 7 new emails. When i press the icon the set up home screen comes up....gmail, yahoo, aol, etc. where can i find the new emails that have been downloaded??

Google stopped supporting Exchange for free accounts as of 1/31/13. If you already had it set up that way on the device, it will continue to work. However, if you didn't, you'll need to set it up as a regular Gmail account.

MRBR: Still showing invoices that have been paid

Similar Messages

Maybe you are looking for