MRN9 and FS10N Difference (URGENT)

Hi Experts
I have got a issue where MRN9/MC.1 doesnt tally with my GL account Balance FS10N. In MRN9 the stock Value and balance sheet value is same but in FS10N the value is different from the Stock Valuation report . I want to know how to get the same amount in both reports. I have even checked transaction OMS2 and there both quantity and value updation is ticked
URGENT
will Assign points if useful
Message was edited by:
Wasim Juwale

Hello
Check if all PDF accounts are set in OBYC.
Also run MRN8 to check any price variances.
Check the valuation methods in the documentation in the links.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/b5/2f26a1d6f511d3b7f30000e82de955/frameset.htm
Reg
*assign points if useful

Similar Messages

Hi All difference between abap and hr-abap urgent pls

Hi All difference between abap and hr-abap urgent pls

Hello,
To add to the above points regarding infotypes
Infotypes stand apart in HR and manage a volume of data in HR domain..they are unique to HR module ranging from basic employee information to time management and finally the custom infotypes.....
Payroll and other monetory activities related to an employee also form a vital part of the HR module....
while considering Reports..in HR data is mainly with respect to infotypes and the concept of PAKEY...7 key fields which uniquely defines any record in an infotype is used..with Pernr(employee number),Begda(begindate) and Endda(enddate) form an integral part of the key..Based on the time constraints(1,2,3) of an infotype the keys are judged (to retrieve data from an infotype)
In ABAP HR we also have lots of predefined function modules that can be used..eg:go to se37..put 'HR*' and press F4...
finally to update an HR infotype record we use the function module hr operation rather than direct updates...also there are standard audit trail reports that monitors various activities such as insert/modify/delete operations on an hr infotype record...
Pls revert back for clarity and reward if helpful
Regards
Byju

Difference between the balance in FBL3N and FS10n

Hi Sapians,
      There is a difference between the balance in FBL3N and FS10n. There are no recent changes made in the GL master data. Also there is a difference between the debit and credit balances of FS10N and table GLT0.
Please advice.
Ashwin

Go through following notes:
FI-GL-GL-D     970096     FS10N: Drilldown -> differences with active new G/L
FI-GL-GL-D     1609283     FS10N: Drill-Down leads to differences with active splitting
FI-GL-GL-D     1021174     FS10N: Drilldown -> differences despite Note 970096
FI-AR-AR-D     327139     Balance display FI: drilldown perfrmnce for balncs
FI-AR-AR-D     716640     Balance display: Drilldown: Total of open items <> balance

FBL3n & FS10N difference

Hi All
We are working on ECC 6.0.
I've noticed that in our development client the number of line items diiffers in FBL3N and FS10N.
Under FS10N I'am looking for 8 period data for FY 2009 for the Balance Sheet GL. When I see balance for the same GL in FBL3N under 'All Items' giving to date as 30.11.2008, I've noticed that the more number of line items are getting generated and hence the balance doesnt matches of both the T.codes.
Also the balance has been duly carried forward to FY 2009.
What could be the reason for this?
Regards
Kapil

Hi BSR / Alex
I've selected cumulative balance for period 8 (FY2009) only in FS10N and TO date as 30.11.2008 for 'ALL ITEMS' in FBL3N and also selected Normal, Noted, Parked Items.
I've checked the selection criteria very carefully and there is hardly difference of 1-4 line items which I've srcutinized individually. I've even checked nothing has been filtered and other criterias as well.
Alex, in FS10N my ledger has been defaulted as 0L (Leading), while in FBL3N no Ledger is getting displayed.
Also as you said how can we check System-Status-report ?
Regards
Kapil
Edited by: Kapil Agrawal on Dec 26, 2008 9:50 AM
Edited by: Kapil Agrawal on Dec 26, 2008 9:52 AM

Problem in F.08 and FS10N reports

Hi Shiba,
thanks for your reply ,but i dont want to change all data from faglflexa only business area field updation is required for balance
sheet instead of blank.
so plz tell me any idea how there values will reflected in F.08 and FS10N reports.
Regards,
Jyotsna

If you can remember in previous reply I have mentioned three table names. It seems to me FAGLFLEXT is using for both the tcode. But if you are directly changing the table data then think twice before changiging.
Regards
Shiba Prasad Dutta

My IPad want charge I've bought a new charger and use difference outlets but it still want charge.

My IPad is getting hard to charge,I have to wiggly the charger to get it to charge. I've bought a new charger and used difference outlets. I need to know what is wrong?

Consider where you are wriggling the charger (I suspect you mean the cable. Why does everybody refer to a cable as "the charger"?) and make sure all the contacts there are free from pocket fluff and such.

How to get exact date and time difference?

Hi,
When i am using the below sql statement:
SELECT (TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') - to_Date('7/27/2006 8:30:13 AM','MM/DD/YYYY HH:MI:SS AM')) * 24 hours FROM DUAL;
the output is:
Hours
8.50055555555556
But Actually it is 8.30
So how can i get exact days and time difference between two dates in Oracle?
Thanks....
Regards,
Suman Sakinala
Edited by: SSN on Sep 19, 2008 1:27 AM

Or more clearly (this time I have my date_from and date_to the right way around hehe!)
SQL> ed
Wrote file afiedt.buf
1 WITH t as (select TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') as dt_to,
2                    TO_DATE('7/27/2006 08:30:13 AM','MM/DD/YYYY HH:MI:SS AM') as dt_from FROM DUAL)
3      ,d as (select (dt_to-dt_from)*24 as diff_hrs from t)
4 -- end of dates
5 SELECT TRUNC(diff_hrs) as hours
6        ,TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60) as mins
7        ,TRUNC(((((diff_hrs) - TRUNC(diff_hrs))*60) - TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60))*60) as secs
8* FROM d
SQL> /
     HOURS       MINS       SECS
         8         30          2
SQL>

Frequency response and phase difference

Hi,
I generate "Sine-Swept" with a function generator, which is the input of my device.
Then, I measure the output(vibration) via a photodiod (which is as voltage).
Now, I want to obtain FRF and Phase difference between these two wave (output and input).
In most of the examples, the input and swept has been generated by the software itself, but if the input has been acquired externally and also the swept has been done via a function generator, how would be the FRF?
I have installed "Sound and vibration toolkit", Could you please give me a heads up, that how can I do that?
In advance, I really appreciate your help,
Petar

Hi,
I attached the project which I've recorded the data from DUTs. Also, I attached 2 snap-shots of the project, in case of the project file couldn't be launched.
I have connected the signal from a function generator to "ACH0" channel, and performed the swept-Freq in the output signal of function generator. (Red graph in 1st chart). Please note that the swept sine wave is generated via the function generator itself...NOT VI
The generated signal by the function generator is the input, which derives the oscillation of a drop,
A photodiode measures the oscillation of the drop via laser-scattering by drop vibration. SO....the signal generated by the photodiode is the "Response"....(white wave in 1st chart)(connected to "Ach1" channel.
Now, I want to obtain FRF, which the input is the signal generated by the function generator, and Response is the output of the photodiod'
As it's seen in the files...the FRF and phase difference is n't what is expected, also the coherence between in and output is zero!
Please help me out with this problem...
Thanks
Petar
Attachments:
12.seproj ‏419 KB
1.JPG ‏183 KB
2.JPG ‏177 KB

Balance of F.01 and FS10n is different, when currency type is 40

All GL Balance from F.01 and FS10N is different for year 2009 and currency type 40, But for year 2008 and currency type 40 all GL balance is match. and if currency type is 10 and 30 all GL balance is match in any year.
thanks every much, if someone help me to resolve it.

Hello,
Actually, you should get the same result.
The possible cause why you have different results can be that you didn't run the balance carry forward (f.16) for ledger ?? (currency type 40) for fiscal year 2009.
You can checl this in tables t881 and t882.|
You can run it even with year 2008 closed. There is no risk, no data is changed in 2008, only the balance carry forward is transfered to the new fiscal year 2009.
I hope it solves your issue
Best Regards,
Vanessa Barth.

FAGLB03 vs FBL3N and FS10N

FAGLB03N does not agree with FBL3N and FS10N for one account, although I've been told by our FI team that they should always balance. There are records in both BSEG and BSIS that do not appear in FAGLB03N, but do appear in FBL3N and FS10N. Is this normal?
The missing records are related to Inbound Receiving of subcontracted parts on one Purchase Order, although the same type of transactions from another P.O. which appears to be almost identical appear on all reports.

You've asked some very interesting questions that I can't answer.
Yes, I should have said specifically that the FI doc behind the 101 movement only has an Entry view - no GL view.
There is another PO very similar to this one - Material almost identical except no BOM (so no comsumption movement), same PO Type, etc. - it seems to work OK. We have both entry view and GL view of this FI Doc.
This company has only been in existence since the spring of 2006, and the FAGLFLEX table has almost 200,000 entries for FY 2006, so it's been there for a while. There are over 2000 entries for this account number, and several for other accounts involving this PO, but none with this account AND PO.
BTW - thank you very much for your continuing analysis and attempts to help.

Miro hitting inventory and price difference

Dear All,
I would like to seek advice of the posting during MIRO on point 4 and 5 why there is a hitting on inventory account and price difference of the amount given? How system get the amount in inventory account and price difference account?
Really need advice.
1)
GR - qty 20
dr inventory $1500000
cr GRC $1500000
2) GI - qty 1 and now remained only 19 qty
moving price = $75,000
qty = 19
price unit = 1
value = $1425000
3) MIRO
dr GRC $1500000
cr vendor $1500000
4) MIRO say qty is 21 and amount no change
dr GRC $1571429
cr vendor $1500000
cr inventory $64626
cr price diff $6803
5) MIRO say qty is 20 and amount i enter $1507500
dr GRC $1500000
cr vendor $1507500
dr inventory $7125
dr price diff $375
thanks

refer my remarks in BOLD
4) MIRO say qty is 21 and amount no change
This scenario is not possible as you have taken GR for Qty 20 only.
*still you have added $ 71429 in GRC so this should be uploaded on Inventory ($71429 / 21 = 3401.38) hence Inventory account will get updated with $3401.38 * 19 (available stock) ie $ 64626 & diff of 21 - 19 = 2 * 3401.38 ($6803) will be updated in Price Diff account*
dr GRC $1571429
cr vendor $1500000
cr inventory $64626
cr price diff $6803
5) MIRO say qty is 20 and amount i enter $1507500
* Goods receipt is posted with 1500000 but vendor has presented invoice of 1507500 hence the additional cost ie 7500 has to be loaded on inventory but available inventory is 19 as 1 qty is already issued from stock hence (7500/20 = 375) for 19 qty inventory account will updated with $7125 (375*19) & for material which is already issued prior to taking invoice receipt ie 1 Qty (375 * 1) = 375 will hit to Price Diff Ac.*
dr GRC $1500000
cr vendor $1507500
dr inventory $7125
dr price diff $375

Landed costs and price differences

I'm trying to figure out what PS does to adjust for total value discrepancies between an invoice voucher and associated PO. Say on my PO I have a line item with quantity of 2 and unit price of $10. Therefore total value is $20. When I create a voucher, that same line item is now 2x$11 = $22. I approve that voucher for $22. Now I run the Extract Landed Cost batch process. What does this process do to "compensate" for the difference between voucher and PO? Does it change the unit price of that item in inventory from $10 to $11?

Hi, yes you are right: Using this approach ML would use price differences for other batches and increase their value instead of posting them as loss like the initial cost.
The way around that would be to post some unplanned material good receipt for the loss production order, e.g. a material called scrap. In account determination you might make sure that these materials have own stock and price difference accounts that you could treat special in your balance sheet.
This would be shown in ML like a joint production between the planned product and the scrap material and multi-level variances would be distributed using following an apportionment structure from material master.
If it is difficult to maintain a reasonable apportionment structure you might implement BADI cost_split described in note 997264.
Also a good possibility would be to use a quantity-proportional split that can be derived from the ML quantity structure.
I could provide an example implementation of that.
best regards, Udo

Credit memo - Price and quantity difference on the same PO item

Hello,
When there are both price and quantity differences between the invoice and the PO/GR on the same PO item, we need two lines on the credit memo to adjust the quantity and the price separately. However, the system gives the error message "Document contains same order item more than once" . If we suppress this message, then we have the error saying the debit and credit of the credit memo does not balance, as it appears the system only read the first credit memo line and ignore the second. Does anyone know how to resolve this (without having two different credit memos for the price and quantity differences)?
Thank you.

Hi,
Please note the following few points.
1.Credit Memo: Credit memo will be posted when you want to reverse a posted invoice.System will reverse the qty and that much amount of invoice.you can post two line items of MIRO for a sigle PO item for qty and amount.you can not have two lines one for qty and other for amount.
If you feel that there is a differance of posting in amount for the INVOICE and GR (normally for GR , the amount postings witll be same as PO price.) reverse the invoice at MR8M or post a credit memo in a single line for amunt and qty and post afresh the invoice amount .
Regards,

b font color ='red' Java JDBC and Oracle DB URGENT HELP PLEASE /font /b

Hello, I am a newbie. I'm very interested in Java in relation to JDBC, Oracle and SAP.I am trying to connect to an Oracle DB and I have problems to display the output on the consule in my application. What am I doing wrong here . Please help me. This is my code: Please Explain
import java.sql.*;
import java.sql.DriverManager;
import java.sql.Connection;
public class SqlConnection {
     public static void main(String[] args) {
          Class.forName("oracle.jdbc.driver.OracleDriver"); //Loading the Oracle Driver.
          Connection con = DriverManager.getConnection
          ("jdbc:orcle:thin:@34.218.5.3:1521:ruka","data","data"); //making the connection.
          Statement stmt = con.createStatement ();// Sending a query to the database
          ResultSet rs = stmt.executeQuery("SELECT man,jean,test,kok FROM sa_kostl");
          while (rs.next()) {
               String man = rs.getString("1");
               String jean = rs.getString("2");
               String test = rs.getString("3");
               String kok = rs.getString("4");
               System.out.println( man, jean, test,kok );//here where my the
                                             //compiler gives me errors
          stmt.close();
          con.close();
}

<b><font color ='red'>Java JDBC and Oracle DB URGENT HELP PLEASE</font></b>Too bad your attempt at getting your subject to have greater attention failed :p

What is the conceptual and functional difference between peripheral target and Enterprise peripheral target?

Dear All,
what is the conceptual and functional difference between peripheral target and Enterprise peripheral target?

Does anyone get a chance to see this ?

MRN9 and FS10N Difference (URGENT)

Similar Messages

Maybe you are looking for