MRP and log of results

Hello Experts,
When I run MRP, I get a message like ie "10 requisitions have been created". Where can I see a list those requisitions?
I am looking for a log of what happened in the MRP run to look into the details of which documents where created and deleted and so on
rgds
GAR

Hi,
You can see the list of purchase requistions created in two ways..
In ME5A, Give the release date(date on which you ran MRP) and enter the other inputs..
It will give the desired outout.. You can give MRP controller also to narrow your search..
Another way is...
MD04. For the material which ou ran MRP , Check in MDO4..
It ll give you planned orders. Click that planned order and click the icon forpegged req in the small window.. It ll give the list of planned orders and Purchase req. under that final material..
You can then select the planned orders that came under the final material..In a similar way as above you can proceed to get the list of all the purchase reqns..
Hope the above definitely claifies..
with wishes....
karthick

Similar Messages

TS1389 i keep having a "the iphone could not be sync because the computer is no longer authorized" i authorize it and still no result

i keep having a "the iphone could not be sync because the computer is no longer authorized" i authorize it and still no result

i keep having the same problem, my little cousin changed the passcode to my iphone 4s and she cant remember it. I've tried transfering all data(apps, movies ect..)to my computer but it says i need authorisation, i put in my apple id and it says i am already logged on to 3 out of 5 computers so i press ok and it goes back to the apple id thingy! please someone help me becausei need to access my phone!!!!!!!
Anyone what do i do!

Windows 7 takes 15 mins to log in and log off - School Enviroment

Hi All,
We're getting a very weird issue at present, our environment consists of 20
students with Windows 7 SP1. They login with roaming profiles. We've noticed
that when they login it takes up to 15 mins and logging off/shutting down takes
about 15 mins also. We have to re-image the PC's to get them working back to
normal however the problem just comes back!
What we've done so far,
Checked cables - all is ok
Used the Verbrose regedit on start-up to find that we needed to install
this hotfix from Microsoft (KB2537556) (worked for a week but then back to
normal, only for logging in not logging off)
Tried some GP changes
Local GP change - time waiting for network reduced to 15 secs then to 0 - no
change
Local GP change to remove all desktop items to see if that was causing
changes - no change
Only affects Student PC's which are used by all students
Any help would be great :)
MR

Hi,
First please check to see how big the student’s profiles are, what is the result if we compare it with teacher’s?
You can also enable boot logging in process monitor to find the cause of the slow logon, please refer to this blog.
The Case of the Veeerrry Slow Logons
http://blogs.technet.com/b/markrussinovich/archive/2012/07/02/3506849.aspx
And check whether you have Enabled “Delete cached copies of roaming profiles” policy setting, enable this policy will delay logoff as some yet-to-be-identified component in the OS is triggering Windows desktop search to cache settings on behalf of each locally
cached profile at logoff.
Regards
Yolanda
TechNet Community Support

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

Inspection Lot Created but not shown in QE72, and cannot input result or UD

Hi Exports,
I have Inspection Lot Created by 04-production goods receive, but not shown in QE72, and cannot input result or UD
Inspection Lot status: CRTD CHCR SPRQ,
in Business Process of inspection lot showing:
*Cancel inspection lot
Assign RMA proc. to insp. lot
Assign notification to lot RMA
Batch log indicator required
Certificate missing
Change inspection lot
Change planned lot quantity
Choose task list for insp. lot
Confirm Receipt of Certificate
Create part. lot for insp. lot
Flag cancellation
Inventory posting required
Lock
Lot for process documentation
Lot reset allowed
What is going wrong?
BTW, the sampling procedure in Inspection Plan is a read-only field, but empty inside.
Daniel

Dear in your case there is no Inspection plan was attached to the lot so attach the plan and make lot status to REL then only you can do Results Recording.
Inspection plan gets auto assigned to availble inspection plan on respective date if you enabled the inspction with tasklist and automatic assignment boxes in relevant inspection types in MM QM view for this Inspction plant should be made avaialble in stsyem before any lot created which can be created QP01.
If it is not getting assiged automatically then you can assign it manually by QA02 here go to inspection specification tab click on Task list assignment the go to sample tab and click on sample and SAVE Inspection plan will be attached to inspection plan.
Once inspection plan is the lot status you can see REL before assignment of a plant it would be CRTD.
Cheers
KK

RE: Big Log Files resulting in Out Of Memory of serverpartition

To clean a log on nt, you can open it with notepad, select all and delte, add a space ans save as... with the same file name
on unix, you can just redirect the standard input to the file name (e.g.:
# > forte_ex_2390.log
(Should work with nt but i never tried)
Hope that will help
De : Vincent R Figari
Date : lundi 30 mars 1998 21:42
A : [email protected]
Objet : Big Log Files resulting in Out Of Memory of server partition
Hi Forte users,
Using the Component/View Log from EConsole on a server partition triggers
an
Out-Of Memory of the server partition when the log file is too big (a few
Mb).
Does anyone know how to change the log file name or clean the log file of
a server partition running interpreted with Forte 2.0H16 ???
Any help welcome,
Thanks,
Vincent Figari
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]

So try treating your development box like a production box for a day and see if the problem manifests itself.
Do a load test and simulate massive numbers of changes on your development box.
Are there any OS differences between production and development?
How long does it take to exhaust the memory?
Does it just add new jsp files, or can it also replace old ones?

How to run mrp and capacity leveling through heuritics.

Hi,
How to run mrp and capacity leveling through heuritics.
What are the setps required for production planning run this thing in the heuritics in pp/ds?
Regards,
Sunil

Sunil,
APO PP/DS doesn't have a 1-to-1 match for MRP/Cap levelling per se. There are, though, a limitless number of ways to achieve the results you want.
Start with a basic PP planning MRP - SAP_PP_002, which will should create all necessary planned orders
Then try a DS heuristic to schedule your orders according to capacity. Schedule Sequence SAP001 is a good starting point. This can be used to schedule your cap relevant work centers such that they fully load the capacity available, similar to cap levelling.
Rgds,
DB49

What is MRP and why it is used?

hi
this question was asked in an interview can some one explain in detail for me
What is MRP and why it is used? If there are 2 Lakhs of items is it feasiable to run MRP since running of MRP for 2 lakhs of item is time consuming, if yes then how it is been done?
thanx

Dear Bashir,
1.MRP is material requirements planning which plans the required quantity of depedent material's along with the required date.
2.MRP procedure is sub divided into a normal MRP,Master Production Scheduling and Consumption Based Planning.
3.Cosnumtion BAsed planning is further sub-divided into Time Phased Planning,Reorder Point Planning and Forecast based
Planning.Reorder point planning can be automatic or Manual.
4.MRP type is differentiated using the MRP type value assigned in the MRP1 view of the material master.
5.Some of the MRP types are PD - MRP,M0,M1,M2,M3 - MAster Production Scheduling related,VB - Manual reorder point
planning,VM-Automatic reorder point planning.
6.It is possible to take the MRP for the whole plant/for a specific MRP area using the batch MRP job.
7.MDBT is the T Code for scheduling the MRP job or it can be scheduled for the program RMMRP000 using the T Code SM36
and the results can be checked using SM37.
Regards
Mangalraj.S

Logging Step results to different fields in adatabase

Hi guys, would be great if you can help me out on this one:
Imagine if I have 3 string test steps within a sequence, and I want to log the result of each of these steps in a different field (coulmn), what should I do?
The main difficulty here is how to access the result of the steps individually, i.e, what parameter are they hidden under?
I have been accessing the parameter: "Logging.StepResult.String", but this gives me result from all three steps at once, and I can only store the 3 results as different record in the same column.
Thanks in advance!

Hi jack@nz,
Are you using custom database steps in your sequence or process model to pull this information into the database or are you going to Configure»Database Options? If you are doing the first method, could you send a screenshot of your sequence or the sequence file itself? If you are doing the second option, are you customizing a schema, and if so, which one?
Cheers,
Kelly
Cheers,
Kelly R.
Applications Engineer
National Instruments

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

On my daughters iPad mini she can not send messages. She can receive them but the send button stays light gray after you type a message. It worked when we first set it up but now it does not. Tried resetting and logging out and back in. With no change.

I can not send messages on an iPad mini the send button stays light gray and will not send. I can receive. I reset and logged out and back inn with no results. It worked fine when we first set it up. Any suggestions?

Hello iMessage issues 1234,
Thank you for the details of the issue your daughter is experiencing with sending messages on the iPad. It sounds like you might have the Subject Field turned on. To disable this go to Settings > Messages > Show Subject Field.
iPhone User Guide - Messages settings
http://help.apple.com/iphone/7/#/iphf2d853e3
If the Subject Field is not enabled but messages are still not sending, I recommend continuing with the following article:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to make the result showing one time and make the result to csv file?

My script having problem of showing out all the AD computer name result from Active Directory once when running it and storing the result to csv file. I am a newbie in AD and powershell.
This is the code:
$strADPathFile = "D:\Powershell for AD\ADPathList.txt"
$strErrLogFile = "D:\powershell for AD\errorADComputer.log"
$arrADPath = Get-Content -Path $strADPathFile
foreach ($strADPath in $arrADPath)
try
$objSearch = New-Object DirectoryServices.DirectorySearcher
$objSearch.Filter = '(objectCategory=computer)'
$objSearch.SearchRoot = $strADPath
$objSearch.SearchScope = "Subtree"
$objSearch.PageSize = 1000
$objResults = $objSearch.Findall()
write-host "Retrieving AD computer information in the domain $strDomain"
write-host "Number of AD Computer Name result: "$objResults.Count
foreach($objResult in $objResults){
$objComputer = $objResult.GetDirectoryEntry()
write-host $objComputer.dNSHostName
try
# InsertSQLTable $objComputer
catch
write-host $error[0]
$strError = $objComputer.dNSHostName + " " + $dateNow + $error[0]
Add-Content $strErrLogFile $strError
catch
write-host $error[0]
Export-Csv D:\PowerShellforAD\test2.csv
This is the error that I had get is that it will get the result for 2nd time again.
By the way, what is InputObject about? I had research some of it and still did not quite get it. Can anyone explain? Thanks

Hi,
in the final line you call Export-Csv. which is a great command at exporting information. However, for it to work it needs a path to export to (D:\PowerShellforAD\test2.csv in your case) and Information (InputObject) to export.
You do not give that command any Information, so it throws an error.
Cheers,
Fred
There's no place like 127.0.0.1

My Apple ID is saying its disabled. I reset my password and connected to computer but still not working. I also logged of and logged back on with my iPad. Any suggestions?

My Apple ID is saying its disabled. I reset my password, connected it to a computer, and logged off and back on my iPad but still showing disabled. Suggestions?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Debug and log Web Service

Hello,
i have a problem regarding web service. I wrote a web service (adapted to my needs) as described in the tutorial for java. But when it comes to testing, the web service throws an exception. The method itself is fine (tested and debugged with a local test client).
The question is, is there a way to debug the web service or is there a logfile in which the exception is described in detail?
Thanks in advanced for all replies
regards,
Rene

Hi Rene,
There is quite a bit of posting in this thread, and as described in the forum hints, that could discourage some people from reading. Maybe if you post the most recent problem in a new post, that will attract more attention.
To your problem, or more likely to the several problems you are having in this thread - the exceptions and its stacktrace should be seen in the server log files.
These are found at something like
:\usr\sap\<sid>\<id>\j2ee\cluster\server<number>\log
It's hard to say where exactly the exception would go without knowing your application, but I would guess that the likely candidate should be the latest defaultTrace.trc file.
If it's not there you may try to copy everything from there in a new location, reproduce the exceptions and check what files have increased their size. There you should see some information what is wrong.
The other way you could deal is to attach via debugger like Benny has suggested, if you have the server already in a debug mode, just connect with the IDE, put a breakpoint in your code before you have invoked the web service, then trigger your code somehow and trace the execution.
The IDE has also the possibility to make a breakpoint on any unhandled exception, there is such button in the debug view. You may try switching it on.
If you want to invoke your bean from a standalone client and see the result, but you are unable to lookupi the JNDI name, then you should double check what exactly JNDI name you are supplying and under what name is your bean. The easiest way is to login at the server telnet administration (telnet 127.0.0.1 50008)
(The telnet port should be the same as the HTTP on your server but with 8 as last digit), then execute those commands :
jump 0
add naming
lsn > c:\my_naming.txt
you should see in a nice way the JNDI tree on your server and you can check where is your bean and how it should be invoked. However I would personally not go to writing standalone program to see the exception. It sounds like less efforts to try some of the other suggestions.
Btw, ideally, you should be able to code your application so that exceptions are reported in a nice way and you are sure where they are going. For example if your front end is a HTML, then a classic approach is to have an error page where the exceptions will be printed so that you don't have to search logs or debug the server.
HTH
Peter

MRP and Availability check clarification

while browsing the forum, many experts here mentioned in old threads that MRP and availability check are two different (independent) concepts. I am really confused on this one. let me put my understanding here and plz experts help me if I am wrong with a figurative explanation, so that will be easy for understanding.
Assume this is the scenario as of today.
Plant stock for material x u2013 100
Reservations for material x u2013 70
Incoming receipts for material x u2013 50
So net stock = 100 + 50 -70 = 80
sales order arrived for material x u2013 100 and availability check is done. Results of availability check says 80 can be confirmed and 20 can be confirmed on later date.Transfer of requirement for quantity 20 is done to MRP. Mrp runs and creates planned order for 20.
In the availability check config ovz9 if I say donu2019t consider reservations, then when availability check is done for 100 quantities..system will confirm 100 because available stock according to system will be 100+50 = 150. So transfer or requirements are not sent to mrp.
So isnu2019t mrp run directly dependent on availability check?

925,
sales order arrived for material x u2013 100 and availability check is done. Results of availability check says 80 can be confirmed and 20 can be confirmed on later date. Transfer of requirement for quantity 20 is done to MRP
No. 100 pcs requirements are passed to MRP.
In the availability check config ovz9 if I say donu2019t consider reservations, then when availability check is done for 100 quantities..system will confirm 100 because available stock according to system will be 100+50 = 150. So transfer or requirements are not sent to MRP.
No, 100 pieces requirement are passed to MRP.
This behavior depends upon how your 'transfer of requirements' is configured, which is an SD setting. Normally, unless the fix date qty field is set in the sales order, the entire 100 pc requirement is passed to MRP in all cases. The assumption is that you have accepted the sales order and will 'some day' need to issue and sell the parts. You need to begin planning for this event now.
When MRP subsequently runs, it will net out the supply elements (stock and inbound reservations) and will from this calculation determine how much needs to be built. It then proposes a solution (planned order or purchase req).
ATP check seldom has much impact on MRP. You are correct in realizing that the ATP check must be consistent with MRP and with your chosen MRP strategies, in order to provide an end-to-end business process that is logical and meets all business requirements. However, in SAP these two functions are separate.
Best Regards,
DB49

MRP and log of results

Similar Messages

Maybe you are looking for