MRP - MD06 - messages 06 & 07 dont show up for certain materials

Hello guys!
i have detected an issue at my system in transaction MD06 for certain materials.
For MRP list a message 06 or 07 in many cases are not shown.
Messages meanings:
06     Start date in the past
07     Finish date in the past
This happens if a PR with message 06 or 07 was not treated between two new MRP lists, messages 06 or 07 are not displayed in MD06 again.
However, if you run MD07, at this transaction, every message is shown correctly.
Please tell me if i explain myself in a right way.
Does anyone know if there is a customizing IMG activity to determine how to show exception messages in MD06?
Thank you very much in advance.
Best regards,
Cecilia.

Hello guys!!!
In addition, i could detect that if i run transaction MD03 for individual planning of this materials, message 42 is displayed to change the delivery date.
However, when we run batch transaction MDBT for every materials at the system, at the same conditions for this materials, no message is generated at MRP List!!!
I checked at planning file and for this materials there is no NETCH indicator marked.
However, i have some PR created for this materials that have not been treated, and their initial and delivery date are out of time.
No new messages were created after the 01 (new PR) a couple of moths ago...
If one purchase requisition is created but then it is not modified... will it be added again for the next mrp run???
Because i can see that they are not marked again at planning file until someone changes manually some field of the PR.
Please help me because i cannot find out any clue to solve this situation!!!
Thank you!!!!!
Regards,
cecil

Similar Messages

  • Text Mandatory only for Certain Materials in Sales Order

    Is there anyway so that I can make certain item text mandatory only for certain materials?
    I tried creating new item category group and new item category. And then create new Text procedure making this text mandatory and assigning to this new item category.
    But there are lot of different types of item categories assigned. So it does not look good to create new item category for each and everyone for this new item category group and material.
    Please guide me how to make the document incomplete for certain materials only when one text is not filled at item level
    Thanks in advance

    Hi,
    what you tried is correct and that is been followed in most of my projects wherever I worked.  That is the best way recommended also.
    If you try with incompletion procedures for item category also, you will endup doing multiple item categories anyway....
    First when I looked at the subject line, even before I opened your POSTING, I got the same resolution as you did....May be the optimal one but, not sure, if something else is possible other than by doing user exit.
    Regards

  • HT4623 My face time is not connecting. Also my message. Keeps showing waiting for activation

    My face time and message keeps showing waiting for activation and never turns on.
    What's going suddenly after installing iOS 7.2 everything went crazy

    Back up, Erase all content and settings, Restore iPhone (downloads fresh iOS), restore from backup.  Should fix.  You will not lose texts, etc.

  • Is possible to restrict MB1B -541 for certain materials

    HI MM experts,
    kindly let me know is there any possibility of restricting users to perform 541 mov thru MB1B/MIGO for certain material codes?
    pl help
    thanx in advance
    Srihari

    Hi,
    It is not popssible to resctrict any movement type for specific material codes through configuration. For restricting certain material codes for movement type 541 through tcode MB1B, ABAP coding is required in user exit.

  • Ringtone option not showing up for certain songs in itunes

    Ok, so some of my songs that I purchased on itunes are now ringtone eligible and the bell isn't showing up in my itunes. I have the most up to date version of itunes. I don't understand why a song that I have purchased in the last month that originally wasn't ringtone capable, but now is, itunes isn't giving me the option to make it a ringtone. Does anyone have any suggestions?
    Help!!!

    There has been a bug reported in iTunes with bell symbols disappearing...it happened to me once a couple weeks ago.
    Right click on the song in your that you think is ringtone-capable and select "Create Ringtone". If the song really is ringtone-capable, it will open the ringtone creation window. If it's not ringtone-capable, you'll get an error message.

  • Confirmed Quantity in Schdeule Lines is Zero for certain item categories

    In make to order scenerios, the confirmed quantity in the schedule line is zero as a result credit management is not triggering. In some make to order scenerios, the confirmed quantity is showing up for certain materials even though there is no stock of the material in the Plant and credit management is getting triggered. While for some other make to order materials the confirmed quantities are showing as zero as there is no stock of the material in the plant and the credit management is not getting triggered. I want the credit management to be triggered irrespective of the availablity of the stock in the plant and the confirmed quantity in the schedule line should not be zero.
    Look forward to the experts suggestions & solutions.

    Hi,
    Thanks for the reply.
    Well all the standard credit management setting have been done including the setting advised by you. We are facing a problem in make to order scenerio for certain materials wherein we get a single schedule line with zero confirmed quantity. In this case the credit management does not get triggered even though the credit limit gets exceeded.
    Requirement now is that even though the schedule line quantity is zero the credit management should get triggered once the credit limit gets exceeded and give the error STATIC CREDIT LIMIT EXCEEDED and should not save the sales order.
    Thanks & Regards

  • MRP Exception messages difference

    Hi PP Gurus
    I need to understand the exact difference between few exception messages
    MRP Exception message 6 - Start date of supply proposal is in past
    MRP Exception message 7 - Finish date of supply proposal is in past
    Query : Does it means that if start date is in past & finish date is in future , then only EM6 will appear .If both are in past , then EM7 will appear ???
    MRP Exception message 10 - This is meant for Rescheduling IN i.e. if the supply proposal finish date is later than reqt date
    MRP Exception message 15 - This is meant for Rescheduling OUT in i.e. if the supply proposal finish date is eariler than reqt date
    MRP Exception message 30 - Plan process according to schedule i.e. pull or push the supply proposal as per reqd date
    It looks to me that
    EM30 is same as EM10 & EM15 since the former also suggests to pull or push as the latter two does .Then what is the exact  difference between these
    rgds
    sandeep

    1- I'm not sure, but could be.
    2- Difference between 10, 15 and 30 is that 10 and 15 are for firmed elements (like production order or purchase order); 30 is for planned order (or other NOT FIRMED element) that cannot be properly planned because of LT problems.

  • Authorization to create PO for certain specific materials

    Hello Experts,
    Is it technically possible to give authorization to create PO,change PO and display PO in a Purchasing Organization based on Material? The user should be authorized to create, display or change PO in a Purchasing organization XXXX only for certain materials. How to achieve this?
    Thanks & Regards
    Yoga

    The object concerned is M_MATE_MAR Material Master: Material Types. Although this object is only checked you may have to manually insert it in the role with the required values.Also, a pre requisite is that you may have to maintain the authorization groups for the material in the material master inorder to restrict such a change.
    Baiscally you can try doing this for one material first. If it works then you can go for a mass change in all materials and maintain user roles with this object.
    --- Discard my above suggestion.
    It is not possible to impose such an restriction based on material type. The above object is used for master data only.
    Edited by: Subramaniam Iyer on Dec 1, 2008 8:38 AM

  • Deleting MRP Termination messages / materials in MD06

    Hi
    We have lot  of old error messages and termination messages in MD06. We want to delete it in MD06
    Is it going to affect the MRP run or any performance for those materials
    Any input will be highly appreciated
    Thanks
    JJ

    Dear,
    Transaction MD06 in the collective display of the Current Stock/Requirements List (Transaction MD07), you call function 'Find overview' in the collective overview. Here, you can choose certain exception groups
    materials which have an exception message it comes according to material results of the last planning run so you can not delete then direclty.
    Please refer this link,
    [Messages in MD06   |sorting exceptional messages in md06]
    Regards,
    R.Brahmankar

  • HT1277 I have OS X 10.9.2 and have downloaded maverick. If I am sending an email message to one person, options for addresses  from my address book show up. However if I want to send it to more than one person, the address options for the others do not sh

    I have OS X 10.9.2. and have downloaded Maverick. If I am sending an email message to one person, options for addresses from my Address Book appear. However if I want to send it to more than one person, the potential addresses for the other persons do not show. Can you please help?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

    I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

    I had this and fixed it.
    I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
    After lots of hunting, I found the Signature Folder. It's in:
    Yourusername>Library>Mail>V2>MailData>Signatures
    Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
    Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
    Since this was literally a clone of my previous setup to a new machine, here's what I did:
    1. Quit Mail
    2. In Problem machine, go to
    Yourusername>Library>Mail>V2>MailData>Signatures
    3. Move the Signatures folder someplace safe, but out of the MailData folder
    4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
    5. Start Mail on the problem machine
    This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
    Hope this helps

  • How do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes? Once is enough and no checkbox exists to say "do not show this message.....".

    When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes.  Once is enough and no checkbox exists to say "do not show this message....."

    Does this apply?
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

  • TS4268 I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activati

    I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activation' I've done the the resets and followed the instructions from the Apple Help page but still can't get it to switch on??

    If you say you have done everything in this article: http://support.apple.com/kb/ts4268, then you should probably contact your carrier for their advice.

  • When i use firefox it hangs for few seconds everytime.if i download something,it dont show what is downloading.

    firefox hangs when i open a new page or a new tab. it dont show what is downloading. plz help.plz dont say
    1. re install firefox
    2. reinstall wndows because i have done it more than 4 times

    Thanks so much for getting back to me. I am familiar with your solution and tried it. It did not solve this problem.

  • Message 'Please check the destinations for parallel MRP'.

    Hi,
    While I was running MD01, I encountered the following message 'Please check the destinations for parallel MRP'.
    Please advise.
    Thank you in advance.

    Hi,
    In MD01 initial screen indiacate parallel processing indicator.
    In SPRO> PRODUCTION > MRP >MASTER DATA > Define parallel processing in MRP. In that give your server name.
    Regards,
    Dharma

Maybe you are looking for