MRP Planned order generation for Order reservation excluding Dependent Requirements

In our Project we have a requirement like for FG stage & SFG1 stage are M.T.O So after sales order are punched through MD50 we have created Planned orders against sales orders,But dependent stages like SFG2 & SFG3 which are pure M.T.S so only Dependent requirements will get generated.Suppose for SFG1 i have partially converted planned order to Production order then for component SFG2 we get Partial Quantity as order reservation.Now requirement is if i run MRP for SFG2 system need to generate demand only for order reservation excluding Dependent requirements.Is there any possibility where we can generate demand only for order reservation.As system will create Planned order for SFG2=Dependent requirement + Order reservation

Hi Uli,
Suppose i have Sales order--100 kgs for FG
B.O.M levels
1.FG-----M.T.O
2.SFG1---M.T.O
3.SFG2---M.T.S
4.SFG3---M.T.S
5.ROH
So if i run MRP via MD50 system would generate planned orders for FG & SFG1 level as they are M.T.O specific
Now my requirement list would be
FG-100kg planned order
SFG1-100kg planned order
SFG2-100kg dependent requirement.
Now suppose i have partially converted SFG1 planned order to production order
SFG1--100kg planned order to 30 kg production order
Now my requirement list would be
FG-100kg planned order
SFG1-70kg planned order & 30 kg production order
SFG2-70kg dependent requirement & 30kg order reservation.
Here my requirement is if i run MRP for SFG2 in MD02 as these stage is M.T.S system should provide 30 kg planned order & if we see down the line it would be like
Now my requirement list would be
FG-100kg planned order
SFG1-70kg planned order & 30 kg production order
SFG2-30kg planned order & 70kg dependent requirement.
SFG3-30kg planned order
ROH-30kg Purchase req
Client requirement is like these..

Similar Messages

Error while saving Prod order - "Class for order classification"

Hi all
I am getting the following error while saving the Production Order -
"Class for order classification has not been generated".
I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
Any help would be highly appreciated.
Thanks in advance.
Hrishi

Solved

Planned order generation for each demand

hi all,
Is it possible to Create planned order for each demand within a day in LTP.
for ex.,
Ms04
Planned order- 19.09.2014 4500
demand   19.09.2014 -- 500
demand   19.09.2014 -- 1500
demand   19.09.2014 -- 2500
Its creating like above is it possible to create planned order as follows
We required as follows
Planned order- 19.09.2014 500
Planned order- 19.09.2014 1500
Planned order- 19.09.2014 2500
demand   19.09.2014 -- 500
demand   19.09.2014 -- 1500
demand   19.09.2014 -- 2500
Which setting controls it. we are using individual/collective requirement as 1 for these materials
How the on different dates separate planned orders are generated. please include your valuable inputs
Regards
Muthu Kumar

Hi Kumar,
as mentioned before.
If you do not have a MTO scenario you need to use BAdI MD_ADD_ELEMENTS to simulate individual requrirements within the same date.
Make sure you check for the right scenario, so the coding is not executed during regular MRP
This coding could be a starting point.
could not test it., but you can give it a try.
data: lf_temp_date type DAT00, ls_MDPS type mdps, lf_planr type PLANR.
if IM_PLSC is not initial.
CH_CHANGED = 'X'.
loop at CH_COPY_MDPSX into ls_MDPS where delkz = 'SM'. "for simulated dependent requirements
if ls_MDPS-dat00 = lf_temp_date.
ls_mdps-planr = lf_planr + 1.
lf_planr = ls_mdps-planr.
else.
lf_planr = ls_mdps-planr.
endif.
lf_temp_date = ls_mdps-dat00.
endloop.
endif.
If you need to have separate planned order depending on header material you can also check for this in addition to requirement date
Uli

Order Status for Order Rel. Billing

Hi All,
I am trying to create an Order relevant billing doc (proforma invoice) which should update the Sales order status in the Document Flow after Billing is created. I mean the Sales should get completed after billing.
I have maintained the Item category as relevant for billing with billing relevance as D (Relevant for Proforma Inv.) but the order status is Open after creating a Proforma Invoice.
Please let me know the solution so that I can implement the same if ok. Though I am using a proforma invoice I can also use another billing doc type if this can help which gets released to accounting.
Please suggest.
Thanks
Sumit

Hi
Infact,billing is created as per the "Billing relevance" value (order realted,delivery related etc) in the Item category of Sales document.
If the item is relevant for delivery(i.e, item category, billing relevance is delivery related),then once you deliver the order completely, then only the status of the Sales order gets completed which you can see in the document flow also.
Similarly, Delivery gets completed status when Billing document is created with reference to this Delivery.
If the item category is relevant for order related billing like in services, there is no physical delivery created. Here the subsequent process of Sales order is Billing.
So, in this case when the order is billed completely then the order will get completed status.
But,irrespective of the "Billing relevance"(order related or delivery related), creation of Proforma Invoice does not update the status of the reference document.This is controlled from copy control as I have already mentioned in my earlier post.
Proforma Invoice is a dummy invoice.

Deactivate idoc generation for order when status is not completed

Hi Guru,
In CRMD_ORDER when sales order is created it will generate bdoc and for that bdoc idoc is going to create for every status , my requirement is to stop the creation of idoc if status is not completed please provide solution for that.
Regards,
Naveen.

Hi Naveen,
As u said u dont want to create idoc on the particular User status(i.e. Not Completed ), in this case u check for u r subcription setting in administration console (txn: SMOEAC) that in which statuses u r idoc get created in field crieteria value, maintain status operator (NE) Not Equal to Not Completed , u r idoc will not get created if u r user status in Not Completed
Regards,
DD's

Internal Order Settlement for Orders with Revenues

Hi
How do you set up the system to allocate costs only to a cost centre and not the revenue for internal orders with revenues. Any help is greatly appreciated.

In the allocation structure you have give source cost elements .. there give only Cost Elements/group of cost elements which are relating to expenses.. .. then only expenses will be settled .
best regards
assign points if useful
Message was edited by:
Emani

Field Planning Indicator for Orders on IW32

Dear SDN,
please, in which table(s) is the field "Planning Indicator" stored for Orders on IW32/IW38 ??
(This field (set of radio buttons) is under "Control" Tab)
I've searched all this forum, but couldn't find any clue.
Thank you.
Fabio

That's it!
The field only gets valued when the Order is either "Planned order" or "Immediate order". My mistake..
Thanks Keshav.

BUG in Conversion of Planned order to Production Order.

Dear all,
I got an error while conversion of planned order to production order are as follows,
No Default values maintained for op.generation for order type ZFT1(matlPILSF002).
Can anyone please guide me to proceed further.
Kumar.

Hi,
Root cause behind this problem is, no Routing found.
First complete below settings.
- Go to OPJG And create defult Operation creation in case of no Routing found.This setting will generate the default Operation incase of no routing found during Order creation.
- In T.code OPJF Create automatic selection parameters (Selection ID) for Routing.
- In T.Code OPL8 Maintain Selection ID for Routing and also maintain type of Routing selection (3 - Automatic Routing selection)
Regards,
Dhaval

User Exit or BADI For MRP Planning

Dear all ,
I want to Control the MRP Planning ( MD01 ) only for Demand Orders..
Tell me any User exits / Badi for that Issue..
i checked in this enchancement M61X0001, this is correct or wrong ,,,,
With Regards ,
GJ

HI
Possible exits
LMDR2001 User exits restr. profiles of opt. pur.ord.-based load bldg
LMDZU001 User exits in additional planning.
I hope there are no BADi's for this try for implicit enhancements if u r using ECC 6.0
Regards
Edited by: Rasheed salman on Dec 20, 2008 9:54 AM

Error when convert planned order to process order

when using tcode COR7, unable to convert planned order (make to stock) to process order.
error message: No default value is maintained for operation generation for order type ZI03
note: order type is customised.
please assist where to check or maintain the default value..TQVM

Dear ,
Create default operation for the process order type and plant combination in OPJG and then check for converting the planned
order to process order.
If you want the system to automatically pick the master recipe,then make the necessary settings and selection ID for the process
order type and plant combination in COR4.
Check and revert
Regards
S Mangalraj
Edited by: Mangalraj.S on Sep 24, 2010 1:51 PM

Mail generation on Order/Notification created.

Hi
I want that the mail is automatically generated & sent to any specific R/3 user or any specified mail id when Order or Notification is created. How to do this?
By using Workflows or by enhancements?
Regards.

Dear ñíkhíl,
Follow the steps for notification creation IW21:
1. Goto SPRO
IMG-PMCS-Maintenance and Service Processing-Maintenance and Service Notifications-Notification Processing-Set wrokflow for Maintenance Notifications.
click on Assign Agents it takes to a new screen, der open Process Sample maintenance notification select PMtask: Edit newly-created notification den click on create agent assignment (press F5) on the top left corner of the screen. it pos up a new window select user and mention the concerned user there.
Come back from that screen, click on Activate Event Linking open WS20000317 for task BUS2038 CREATED click on the details button and tick both the options Event Linkage activated and Enable usage of event que press enter, then you can observe the Green indicator Activated.
Now create a Notification, it will trigger a mail in SAP to the user u assigned. That user can check SAP mail box (T code SBWP, Inbox - workflow).
2. You can follow the same setting for maintenance orders creation too.
IMG-PMCS-Maintenance and Service Processing-Maintenance and Service Orders-Functions for order types-set work flow for orders.
open PM-PM-WOC-Maintenance orders, follow the same settings that of notifications.
Hope this will help you achieving your requirement.
Regards,
Praveen.

What's the difference between task list release for order and release for c

What's the difference between task list release for order and release for cost?

Pallavi,
The status of the task list determines in which other application areas the respective task list may be used.
Release for costing: means that the task list can be used to calculate costs in Transaction IA16 i.e. the costs for the task list operations would be calculated if released for costing status is set.
Release for use in the order: Released for Order means that you can use the task list in an order i.e. you could include operations from a task list in an order.
Regards,
Usman

Issue in passing process order related to order type ZGP9.

Hi Experts,
There has been a development done in CIF user exit to block process orders having order type ZGPD & ZGP7. But we are also facing issue for process order flow for order type ZGP9.
1. To avoid double counting of Depack orders (order type ZGPD) in actual production key figure of SCIPIO, stop sending actual production for order types ZGPD from P1 to SCIPIO.
2. To block Rework (ZGP7) and De-pack (ZGPD) Process order in CIF from SCIPIO end, Add one extra field in Custom Structure CI_ORDCUS which transfers Process Orders to APO. This field will capture "Order Type" for Process Orders and send it to APO.
could any body suggest me why the issue is coming for process order ZGP9.

Hi Venkat,
1) Check whether the user exit is implemented properly
2) Check whether the process order showing ZFGP9 is
created recently?
3) Archive that process order and try creating a manual
process order and check. If still error persists, use an
abapper to check which table is calling that order type
and accordingly you can proceed.
Regards
R. Senthil Mareeswaran.

Restriction of planned order generation (mrp)in other plant.

Hi,
I am running mrp for sales orders and i want to restrict the planned order generation in other plants other than the sales order plant.
through standard activity it can be blocked by not maintaining special procurement key of stock transfer.
But some users are creating manual demand in other plant(STPO) against the same sales order for some sub assembly. so if they are running MD02 in their plant it is creating planned orders against the same sales order.
I want to restrict the planned order generation against any sales order in other plants. How it can be done.any enhancement please suggest.
Regards
Madan

Hi,
we cannot restrict the authorizations so specifically here in my business client.
Based on planned orders we have defined some programs.
the programs are effecting because of these unwanted planned orders which have been created for a different plant sales orders.
Is there any enhancement or BADI to control the creation of planned orders in other plant for a sales order of different plant.
please suggest.
Regrds
Madan

MRP not considering open purchase orders when planning for open sales order

Dear Experts,
1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
2 what tcode can I use to delete all purchase reuisitions in the sytem

There was no response to these questions so i had to close it to make space for another

MRP Planned order generation for Order reservation excluding Dependent Requirements

Similar Messages

Maybe you are looking for