MRRL tcode customization

Hi,
We are customizing the tcode MRRL.
Based on service entry in ML81N system has to pick short text entered in ML81N to MRRL tcode.
Please tell how can this be done?
Is there any user exit for that?
Please reply,
Dipak

Hi,
MRRL Transaction code is used for the Invoice verification for ERS vendor.
For ERS Vendor after running this transaction code system will generate Invoices.
I am not getting where you want to copy the text of SES in invoice.
I think it will not work in standard SAP.
Regards,
Manish

Similar Messages

  • How to set up or change recipient email for MRRL Tcodes

    Hi,
    1. After running the Tcode MRRL with specific a CC, a Vendor, a PO and a PO item
    2. Go to tcode sost, I found out that the recipient email is what maintained in General data for the CC and vendor in tcode xk03
    3. I want to change the recipient email to what maintained in Company Code data (tcode xk03)
    Can I pursuit this task by configuration ? If I can not do that is there any way to make the corresponding changes by development works ?
    Thanks in Advanced,
    Hung
    Edited by: hungto on Feb 14, 2011 7:44 AM
    Edited by: hungto on Feb 16, 2011 5:29 AM

    Hey mexigrl64,
    Thanks for using Apple Support Communities, and great question!
    The @icloud.com email address is only required if you want to use iCloud Mail & Notes. You can still use your Apple ID (in your case, the @yahoo.com address) for iCloud Contacts, Calendars, Reminders, Find my iPhone, Backup, etc. In short, you can use all of these functions without creating the @icloud.com address.
    From the information you provided, and if backups are your only concern, then it sounds like you are good to go! There is no need to configure your iCloud settings to reflect the @icloud.com address, as this is just another email account that others can reach you at.
    For more information on the @icloud.com address:
    iCloud: Set up an @icloud.com email address
    http://support.apple.com/kb/PH2620
    Creating an iCloud account: Frequently Asked Questions
    http://support.apple.com/kb/HT4436
    For additional information on iCloud backup:
    iCloud: Backup and restore overview
    http://support.apple.com/kb/HT4859
    Thanks,
    Matt M.

  • Adding field in MRRL Tcode Initial screen

    Hi,
      We have a requirement that i have to add one parameter in MRRL initial screen, Please can any one give guidelines to resolve this issue.
    With Thanks & Regards,
    Samba

    Go to Report RMMR1MRS.
    Click SHIFT + F4
    Go to line 91
    ENHANCEMENT-POINT rmmr1mrs_04 SPOTS es_rmmr1mrs STATIC.
    Right click and enahcement implementation ->create enhancement
    You willbe able to write your own code. declare the parameters/select option which ever you want.
    Similar way use enhancement spot ES_MMERS-> Adding custom Field in Output..
    BAdI MRM_ERS_IDAT_MODIFY (BAdI to change document lines in ERS):
    Hope it solves your problem
    Nabheet

  • CA03 tcode customization of workcenter, activity type

    Hello Expert,
    In CA03 Transaction Code, there are fields like Operating,workcenter, plant , control Key, Activity Type etc..
    I just want to know where these all customization can be done want to check cost center and activity hours for one article.
    where we assign operating, workcenter,plant, control key, Activity type ???
    Thanks in Advance.
    Sujeet

    Dear Sujeet,
    1.Work center and routing are also the master datas for PP Module.
    2.Work center is the place at which the individual operations are carried out and its created using CR01.
    3.Each work center will be linked to a cost center in the costing tab.
    4.Before making this assignment, for a combination of cost center and activity type the activity per hour
    rate will be maintained in KP26 for the periods.
    5.If for the same activity type different rates are to be maintained means,then it can assigned to a
    different cost center only.
    6.One work center can be linked only to one cost center.
    7.one cost centers can be linked to several work centers.
    8.Cost centers will be created using KS01 and activity types using KL01.
    9.While creating routing using CA01,for each operation a work center must be assigned.It means that
    particular operation will be done in the mentioned work center.
    10.Control key can be assigned either directly in the work center or else in the routing manually it can
    be added or changed.
    11.A control key tells the whether an operation is relevant to scheduling,costing,capacity
    requirements,qualtity insepction characteristics.
    12.Control key configuration can be made in OP67.
    13.OP5A is for configuring the routing.
    14.OPFA is for configuring the work center fields.
    Regards
    Mangalraj.S

  • Help required on MRRL tcode

    hi,
    As of now client is printing generated ERS invoices but the new requirement is he wants the output to be generated in pdf and this pdf document should be moved to his portal.
    can any one help me in fixing this issue?

    hi,
    GO to NACE transaction, there you can find various applications, Select the appilcation ME  and the output type as wa01 or wa03 double click the processing routines and there you assign the required samrtform for your print.
    REgards,
    velu

  • Witholding tax calculation in MRRL tcode

    HI
    I have an requiremment to calculate withholding tax on particular condition type of PO in ERS.what should i do to achieve that ......need help ASAP...????

    Hi,
    1. 194C - Payment in excess of Rs.30,000/- in a single payment or Rs.75,000 in aggregate in a FY
    Not possible to meet entire requirement.
    2. 194I - Payment in excess of Rs.1,80,000 p.a.
    it is possible
    suggest you to use the  Accumulation function
    Please also maintain the Minimum /Maximum amounts per with holding Tax Type & use the below mentioned path for the same
    SPRO>Financial Accounting>Financial Accounting Global Settings>Withholding Tax>Extended Withholding Tax>Calculation>Minimum and Maximum Amounts>Define Min/Max Amounts for Withholding Tax Types
    Assign the Maximum  base amount as Rs.180000/-
    then at the time of calculating Withholding Tax it will calculate tax for anything excees of the above mentioned amount
    Please refer the below link for details
    http://www.sapficoconsultant.com/pdf/Extended%20Withholding%20tax%20configuration.pdf
    Regards
    Praveen P C

  • MM Report in SAP  tcode

    Dear All,
    can anybudy explain where i got these report in sap or any tcode
    Customization of reports / MIS will help us in keeping a check on the excess inventory,
    Some of the reports which are immediately required are –
    •     Summary of the PO’s
    •     Summary of the delivery schedule – Monthly – per month and cumulative. – Qty & Value
    •     Report on receipt of material against the delivery schedule. – Qty & Value
    •     Vendor outstanding age analysis.
    with warm Regards

    Dear
    chk this
    Summary of the PO’s- Use ME80FN with purchse order history selection in change view.
    Summary of the delivery schedule – Monthly - ME80FN
    Report on receipt of material against the delivery schedule- ME80FN and ME2N with the selection of we102/106
    Vendor outstanding age analysis- MC46 to MC50 and FBL1N
    regds
    dev...!

  • Mrrl issue

    Dear All
      My requirement is like this..
         MRRL tcode is creating IR no automatically , but when IR is getting created it is getting posted on
          todays date means it is taking system date...
       I debugged the program they are using one FM   MRM_INVOICE_VERIFICATION_ERS
        but there is no date option
    I need to give date option in Selection Screen so that IR will be posted on that date itself..
    Please help me...

    Hi Soyunee
        Thanks a lot for reply , i will implement it  and let you know...
    Only doubt is that i have made one customized report like MRRL wherein i have given selection screen...
    I just wanna know whether this exit will trigger in that program..

  • ERS --- Reference field

    Hi All...
    Question in ERS Invoice.
    I am Implementing ERS Process for our intercompany scenario. When the COmpany code A recieves the
    goods the ERS invoice is created based on the GR and the Reference Field in the Invoice is filled up with the Inbound Delivery Number. Can anyone say where is this config of copying Inbound Delviery Number into the ERS Invoice exist or its a std?? What are the other fields all can be updated in this field  using the
    std SAP config ?
    Regards
    Balaji

    If you receive the GR against the PO then PO number will be copied or if you enter the GR against the Delivery then Inbound delivery number will be copied.
    this is the std system...there is no config for this.
    This selection you do in the MRRL tcode where you select
    1        Document selection per vendor                         
    2        Document selection per purchase order                 
    3        Document selection per order item                     
    4        Document selection per delivery document/service entry

  • Need help with output type EDI for ERS

    All,
    I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
    1)  I have output type ERS6 which is defined as ERS EDI.  I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
    2)  I've added my supplier to this output type. 
    3)  I assume I need to create a partner profile for this supplier?  If so can someone tell me the message type to use?
    Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
    Thanks for your help.
    Sandra

    Hi,
    You don't have to modify thise setup unless you have any customized requirement.
    You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
    Enter the following values using tcode WE20.
    Field                                       Value
    Message type                         GSVERF
    Partner type                             LI (vendor)
    Partner function                        LF (vendor)
    Port                                         SUBSYSTEM ( Port to your middleware)
    Output mode                            such as Collect IDocs
    Basic type                                GSVERF01
    Application                                 MR
    Output type                                ERS6 or the type you have defined
    Regards,
    Karuna

  • Enhancement MRMH0001

    My requirement is like this..
    MRRL tcode is creating IR no automatically , but when IR is getting created it is getting posted on
    todays date means it is taking system date...
    For this purpose i am using
                      MRMH0001(EXIT_SAPLMRMH_001) EXIT_SAPLMRMH_001..
    I am writing this small piece of code inside the execute..
       if E_RBKPV_ERS_CHANGE-budat is initial.
       move '20081011' to E_RBKPV_ERS_CHANGE-budat.
       e_change = 'X'.
       endif.
    But i am getting this error..
      System error: Error in routine MRM_RBKPV_CHECK -RBKPV-BLART
    then i debugged the exit i found when i am passing this date to E_RBKPV_ERS_CHANGE
    it updates h_rbkpv..
    but when it updates h_rbkpv budat it removes blart , lifnr  and some other fields...
    tha is why error is coming.
    Please i need help.

    ishfaq ghani wrote:Hello,
    First of all, i don't have SAP available at the moment to check this, so sorry if i am wrong.
    I am not sure, but before that IF instruction, you need to have something like this:
    move-corresponding I_RBKPV into E_RBKPV_ERS_CHANGE
    From what i have seen on [This Thread|Re: Idoc status 51 error; i believe that all the contents of H_RBKPV are replaced by E_RBKPV_ERS_CHANGE. And if this 2nd structure is empty, then H_RBKPV will become empty as well..
    >
    > I am writing this small piece of code inside the execute..
    >
    >    if E_RBKPV_ERS_CHANGE-budat is initial.
    >    move '20081011' to E_RBKPV_ERS_CHANGE-budat.
    >    e_change = 'X'.
    >    endif.
    >
    > But i am getting this error..
    >   System error: Error in routine MRM_RBKPV_CHECK -RBKPV-BLART
    >
    > then i debugged the exit i found when i am passing this date to E_RBKPV_ERS_CHANGE
    > it updates h_rbkpv..
    > but when it updates h_rbkpv budat it removes blart , lifnr  and some other fields...
    > tha is why error is coming.
    Hope this helps you both,
    Just let me know the results
    Good luck!

  • What is the use of tcode mrrl

    Dear Experts,
    what is the use of tcode mrrl
    Pls give a solution...
    Kind Regards
    Sajid

    Hi Shaik
    When you want to do the automatic settlement.....using ERS
    you will use the MRRL transaction code to settle the invoice.... it will generate the credit note in background.
    In Automatic settlement you wont receive the Invoice from the vendor....
    REgards
    anand

  • Customization of tcode 'Create Billing Document - *VF01*'

    Hi,
    I have a requirement where I need to enable the disabled field Item in TCode VF01 (to make the field similar to Document Number which is enabled). Please suggest me how to proceed as Functional guys said it is not possible to do from Functional side.
    Any kind of input is highly appreciated.
    Thanks
    RKU

    Hello,
    think there is no 'customization' for the item-field in VF01 - it's just an only output field in Screen SAPMV60A / 0102 - it would be a modification.
    But you could just use the button 'selection list' - that one allows to pick only one or certain items from the document you want to bill. 
    Regards Wolfgang

  • ERS:Tcode MRRL

    Hi,
    ERS Process post invoice for all open good receipt without expecting the invoice from vendor.
    The tcode is MRRL.while runnig this i getting error of base line date.
    what is cause of error, how to solve this problem.
    shakir
    Edited by: Shakir on Jan 27, 2008 7:59 PM

    Hi,
    The error message is like this
    "Change Baseline Date.GR Doc. 5000123513 Posted on 20.12.2007."
    i had check the vendor master payment term in purchasing data screen it has been assign with correct payment term
    The purchasing document also assign withsame term.
    The detail of payment terms setting in OME2 are as fallow
    Account type :
    customer
    vendor
    Default base line date :
    posting date
    payment terms
    no. of days 45
    rest all other setting it is blank,i am trying to send what setting are made for payment terms.
    let me if any other setting are mandatory for ERs.
    thanks for ur reply.......
    shakir

  • Self invoices for inbound vs. outbound transportation POu2019s with tcode MRRL

    Hi Gurus
    1.     Is it possible to generate different self invoices for inbound vs. outbound transportation POu2019s with tcode MRRL? We have requirements from some business to have separate invoices, whereas some other want unique invoice.
    2.     How can we manage transports across different countries in/out EC? According to our fiscal specialists are saying, different VAT codes apply for every u201Csectionu201D of the journey, separating the EC section vs. non EC section.
    Thanks for your time
    Sridevi

    Hi Gurus
    1.     Is it possible to generate different self invoices for inbound vs. outbound transportation POu2019s with tcode MRRL? We have requirements from some business to have separate invoices, whereas some other want unique invoice.
    2.     How can we manage transports across different countries in/out EC? According to our fiscal specialists are saying, different VAT codes apply for every u201Csectionu201D of the journey, separating the EC section vs. non EC section.
    Thanks for your time
    Sridevi

Maybe you are looking for