Ms-exchange 2013 audit logs retrieving in csv format not working?
I need help regarding pulling specific information from exchange 2013. The information pertains to mail-exchange audit logs. The exchange in my environment is ms-exchange 2013. Steps performed so far are:-
**step#1**
Create test Environment on Exchange Server 2010 and Active Directory:
Two Mailboxes for testing (with dummy email messages) (i.e., test-mailbox-1, test-mailbox-2)
Two Active Directory Accounts for testing (testAcct01, testAcct02)
Assign Permission to Test Mailboxes: Owner of Email Box test-mailbox-1: testAcct01, Owner of Email Box test-mailbox-2: testAcct02
**step 2**
Enable Mailbox Auditing on the test-mailbox-1:
Use EMS to enable mailbox auditing on mailbox: test-mailbox-1
Commands:
o Set-Mailbox -Identity "test-mailbox-1" -AuditDelegate Copy,Create,FolderBind,HardDelete,Move,MoveToDeletedItems,SendAs,SendOnBehalf,SoftDelete,Update -AuditEnabled $true
o Set-Mailbox -Identity "test-mailbox-1" -AuditAdmin Copy,Create,FolderBind,HardDelete,MessageBind,Move,MoveToDeletedItems,SendAs,SendOnBehalf,SoftDelete,Update -AuditEnabled $true
Note: You must have permission for Organization Management and Record Management if you want to enable mailbox auditing.
**step#3**
Verify that the Mailbox Auditing is Successfully enabled for mailbox: test-mailbox-1:
Use EMS to verify the settings of mailbox auditing
Command:
o Get-Mailbox "test-mailbox-1" | Format-List *audit*
**step#4**
Verify that the Mailbox Auditing is Successfully enabled for mailbox: test-mailbox-1:
Use EMS to verify the settings of mailbox auditing
Command:
o Get-Mailbox "test-mailbox-1" | Format-List *audit*
**step#5**
Perform test activities on mailbox “test-mailbox-1” using account id: testAcct02
For Example: Access Inbox folder, move items from one folder to another folder, delete items, read messages, send email using SendAs and SendOnBehalf, create new folder, copy email items etc.
**step#6**
Perform test activities on mailbox “test-mailbox-1” using “Administrator” Account.
For Example: Access Inbox folder, move items from one folder to another folder, delete items, read messages, send email using SendAs and SendOnBehalf, create new folder, copy email items etc.
**step#7**
Use EMS Cmdlet to retrieve Mailbox audit logs for mailbox “test-mailbox-1”
Command:
o Search-MailboxAuditLog -Identity test-mailbox-1 -LogonTypes Admin,Delegate –ShowDetails -StartDate mm/dd/2014 -EndDate mm/dd/2014 | Export-Csv “c:\test-Audit-Results.csv”
o New-MailboxAuditLogSearch "Admin and Delegate Access" -Mailboxes " test-mailbox-1" -LogonTypes Admin,Delegate -StartDate mm/dd/2014 -EndDate mm/dd/2014 -StatusMailRecipients [email protected]
I'm unable to go past step#7, as I see nothing in csv file. I don't know why is this? any help.
Hi,
I will perform these steps in my lab and paste the result.
Beg your patient waiting.
Thanks
Mavis
Mavis Huang
TechNet Community Support
Similar Messages
-
Exchange 2010 SP3 cohabitation Exchange 2013 ecp?exchver=15 from external not work
Hi
i have installed an exchange 2013 cohabitation with exchange 2010 for migration. outlookanywere,ecp,owa, autodiscovery...etc are configurered
when i try to connect to the eac or owa internaly its work, but when i try to do externaly https://mail.mydomain.com/ecp?exchver=15
i have error 302, 301 to many redirections
how can i fix this
thanksin advanceHi,
Generally, status 301 means that the resource (page) is moved permanently to a new location. Please refer to Sneff_Gabor's suggetsion to check the Redirect setting s for OWA and ECP in IIS manager.
Additionally, please provide more information about your issue and collect any error logs for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
Exchange 2013 OWA Intergration - More than 1 CAS - not working?
Hello,
Not sure why I can't get this working properly in my test lab. My admin user is unable to sign in through OWA to Lync but the actual client works fine. I get the "there is an error, contact your system administrator." I followed the TechNet article
here http://technet.microsoft.com/en-us/library/jj688098.aspx. Here is my configs
PS C:\Users\Administrator.R5A> get-cspartnerapplication
Identity : Exchange
AuthToken : Value=https://autodiscover.domain.tld/autodis
cover/metadata/json/1
Name : Exchange
ApplicationIdentifier : 00000002-0000-0ff1-ce00-000000000000
Realm : domain.tld
ApplicationTrustLevel : Full
AcceptSecurityIdentifierInformation : False
Enabled : True
PS C:\Users\Administrator.R5A> get-csoauthconfiguration
Identity : Global
PartnerApplications : {Name=Exchange;ApplicationIdentifier=00000
002-0000-0ff1-ce00-000000000000;Realm=DOMAIN.
TLD;ApplicationTrustLevel=Full;AcceptSecuri
tyIdentifierInformation=False;Enabled=True
OAuthServers : {}
Realm :
ServiceName : 00000004-0000-0ff1-ce00-000000000000
ExchangeAutodiscoverUrl : https://autodiscover.domain.tld/autodiscover/a
utodiscover.svc
ExchangeAutodiscoverAllowedDomains :
PS C:\Users\Administrator.R5A> get-cstrustedapplication
Identity : torsv-excas01.domain.tld/urn:application:outlook
webapp
ComputerGruus : {torsv-excas01.domain.tld sip:[email protected];gruu;opaque=srvr:outlookweba
pp:ybjGB5gixFCrsTQrQHNQHAAA}
ServiceGruu : sip:[email protected];gruu;o
paque=srvr:outlookwebapp:ybjGB5gixFCrsTQrQHNQHAAA
Protocol : Mtls
ApplicationId : urn:application:outlookwebapp
TrustedApplicationPoolFqdn : torsv-excas01.domain.tld
Port : 5199
LegacyApplicationName : outlookwebapp
Identity : torsv-excas02.domain.tld/urn:application:outlook
webapp
ComputerGruus : {torsv-excas02.domain.tld sip:[email protected];gruu;opaque=srvr:outlookweba
pp:NVWngwaX91yyXJLGooUVkwAA}
ServiceGruu : sip:[email protected];gruu;o
paque=srvr:outlookwebapp:NVWngwaX91yyXJLGooUVkwAA
Protocol : Mtls
ApplicationId : urn:application:outlookwebapp
TrustedApplicationPoolFqdn : torsv-excas02.domain.tld
Port : 5199
LegacyApplicationName : outlookwebapp
PS C:\Users\Administrator.R5A> get-CsTrustedApplicationPool
Identity : TrustedApplicationPool:torsv-excas01.domain.tld
Registrar : Registrar:sip.domain.tld
FileStore :
ThrottleAsServer : True
TreatAsAuthenticated : True
OutboundOnly : False
RequiresReplication : False
AudioPortStart :
AudioPortCount : 0
AppSharingPortStart :
AppSharingPortCount : 0
VideoPortStart :
VideoPortCount : 0
Applications : {urn:application:outlookwebapp}
DependentServiceList : {}
ServiceId : 1-ExternalServer-1
SiteId : Site:MySite
PoolFqdn : torsv-excas01.domain.tld
Version : 6
Role : TrustedApplicationPool
Identity : TrustedApplicationPool:torsv-excas02.domain.tld
Registrar : Registrar:sip.domain.tld
FileStore :
ThrottleAsServer : True
TreatAsAuthenticated : True
OutboundOnly : False
RequiresReplication : False
AudioPortStart :
AudioPortCount : 0
AppSharingPortStart :
AppSharingPortCount : 0
VideoPortStart :
VideoPortCount : 0
Applications : {urn:application:outlookwebapp}
DependentServiceList : {}
ServiceId : 1-ExternalServer-2
SiteId : Site:MySite
PoolFqdn : torsv-excas02.domain.tld
Version : 6
Role : TrustedApplicationPool
Test-CsExStorageConnectivity works fine.
What's weird is when I try testing OWA IM login and use the SIP debugger I see this entry.
Start-Line: NEGOTIATE sip:127.0.0.1:5061 SIP/2.0
FROM: <sip:sip.domain.tld>;ms-fe=torsv-lync01.domain.tld
TO: <sip:sip.domain.tld>
CALL-ID: 4a017cf0e45a4bd7b1a78bdd83821277
CSEQ: 1 NEGOTIATE
VIA: SIP/2.0/TLS 192.168.1.9:65137
MAX-FORWARDS: 0
CONTENT-LENGTH: 0
SUPPORTED: NewNegotiate
SUPPORTED: ECC
REQUIRE: ms-feature-info
SERVER: RTC/5.0
$$end_record
Why are the TO and From fields showing the same thing? What am I missing
Exchange CAS 1 and CAS 2 running Exchange 2013 SP1 on Server 2008 R2
Lync 2013 with latest windows updates.For anyone that finds this in Google and has separated Exchange 2013 roles or had this issue I resolved it with the help of Microsoft.
First issue
- Web.config edits on MBX servers instead of CAS. You do NOT do any web.config edits on the CAS server. The reason is the CAS server proxies the request to Mailbox servers and the actual server connecting to Lync is your mailbox servers.
- Verify that your IIS port 443 binding on your mailbox server for both backend / default website the certificate matches and has all the names in it.
- Thumbprint that you put in your web.config file should be the cert thumbprint currently equipped on your Mailbox server.
Second issue I had was the Lync config wasnt correct. We deleted all the trusted application servers and recreated the trusted application server by creating new multi trusted app. added in the two CAS servers. then recreated the New-CsTrustedApplication
to tie with the newly created application server pool.
iisreset on all the servers and then the issue was resolved!
The reason why the SIP request was malformed was due to not having the web.config edits done properly. -
1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1
Hi,
I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting âCSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23â.
Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
Other reports are working fine.
1. TACAS+ Accounting - not working
2. Logged in Users - not working
3. TACAS+ Administration - working
4. Passed Authentication - working
5. Failed Attempts - working
Any suggestions or any idea, please revert.
Regards
VineetHi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet -
repeating error message reads: "valid apple id but not icloud account." when trying to start my icloud account. I tried downloading on a different computer and logging in and it did not work. I have restarted my computer several times. I have changed my password several times. I have tried to access the icloud page. Nothing has worked. Now I have this stupid app and some of my music is still not being shared on both of my computers.
I have the same problem signing in...but, I finally got a screen saying you have to set up a account on a device..like an ipad to get a iCloud sign in ...my apple id is [email protected] and this screen reset to [email protected]
If you don't have an apple device you may be out of luck. I don't know. I'm still waiting for help just as you are...good luck to both of us though. -
Each time I log into iCloud, I check, Keep me logged in, but this does not work. I have to reenter user name and password etc each time I try to go back to my iCloud account.
Hi,
In Keychain Access app in the Menu for the App is Keychain First Aid.
If you open this is the tick box for Synchronising the Login password with the so called Login Keychain ticked ?
9:49 pm Monday; March 16, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
SharePoint 2013 audit log unexpected error
In one of my SharePoint 2013 site collection, when i try to save a audit log, i get unexpected error. It worked fine before last week and no any special setting has been applied before the issue appeared. The issue doesn't appear in other site collection.
i have tried to reproduce the issue with farm admin account and site collection admin, no success for all these accounts. However, i can see access denied error in the ULS log although i think the permission is not the problem. You may check the ULS log below.
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xC33B005
2jtj Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Unified Logging Service c91s
Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtk High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtq High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jx8 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s03 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s02 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jw0 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 06/19/2014 10:48:07.68, Original Level: Verbose] SQL connection time: 0.064296296654057
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General 8nca
Medium Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32
errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Runtime tkau
Unexpected System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在
System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General ajlz0
High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)
在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)
在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44i have added the account to the local admin group of SQL Server and SharePoint Server. the issue remains. it is the system admin of the SQL server.
Logging Correlation Data
Medium
Name=Request (POST:https://xxx/_layouts/15/CustomizeReport.aspx?ReportId=df9e0f20-f356-4115-9286-ac6eecbc03ce&Category=Auditing)
Authentication Authorization
Medium
Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|tlw\farmadmin, ClaimsCount=28
Logging Correlation Data
Medium
Site=/
Information Rights Management
Medium
Information Rights Management (IRM): Requesting user is System account.
Files
High
UserAgent not available, file operations may not be optimized. 在 Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean
disposeIlb) 在 Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) 在 Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) 在 Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) 在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
String& redirectUrl, Boolean& ObjectIsList, Guid& listId) 在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
bytes) 在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound) 在 Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
virtualPath) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate) 在 System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
在 System.Web.UI.Page.ApplyMasterPage() 在 System.Web.UI.Page.PerformPreInit() 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 在 System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error) 在 System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) 在 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) 在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) 在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
Files
Medium
Spent 0 ms to bind 29783 byte file stream
Monitoring
High
Leaving Monitored Scope (GetFileAndMetaInfo). 执行时间=17.6751425083646
Monitoring
High
Leaving Monitored Scope (GetWebPartPageContent). 执行时间=17.8435806939653
OpenXml
Medium
OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\FarmAdmin\AppData\Local\Temp\tmpBFE2.tmp, fcm=3)
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:33.08, Original Level: Verbose] SQL connection time: 0.0727483919888626
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:35.00, Original Level: Verbose] SQL connection time: 0.07969118458531
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
0xC33B005
Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xC33B005
Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:36.86, Original Level: Verbose] SQL connection time: 0.0706353681551612
General
Medium
Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode,
IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean
disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Runtime
Unexpected
System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
General
High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset,
Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close()
在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable
query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest()
在 System.Web.UI.Page.ProcessRequest(HttpContext context) 在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) -
Exchange 2013 migrations logs deleted!
Hi,
I migrated mailboxes from 2010 to 2013 one domain straight forward process that went successfully. The migration reports were deleted from the 2013 ECP. Any idea how to get logs or information on "when" mailboxes were moved to the 2013 servers?
Thank you
Ibby667Hi,
I migrated mailboxes from 2010 to 2013 one domain straight forward process that went successfully. The migration reports were deleted from the 2013 ECP. Any idea how to get logs or information on "when" mailboxes were moved to the 2013 servers?
Thank you
Ibby667
You can get that information using Get-Mailboxstatistics.
Example:
Get-Mailbox | Get-MailboxStatistics -IncludeMoveReport | FL Displayname,MoveHistory
UPDATE: Exchange 2013 stores by default information about the latest
5 moves in the mailbox, so that is why you can get the information even if the migrationbatch or moverequest has been deleted (MaxMoveHistoryLength="5" in *\bin\MsExchangeMailboxReplication.exe.config)
Martina Miskovic
all suggestions in here will work, however i like & believe it is best to pull the moverequeststatistics vs the mailbox statistics.
as listed in my reply, this will help to user determine numerous things about the move that the mailboxstatistics will not show
I agree, but if the moverequests has been deleted (default setting: 30 days) and you want to know when a mailbox was moved, then you can with Get-Mailboxstatistics.
Martina Miskovic -
Exchange 2013 RPC URL shows Error 404 Page Not Found
Hi,
I have been told by Barracuda Support to verify my Exchange 2013 RPC url is working correctly using the following address in a Web Browser:
https://RoH server address/rpc
When I hit this URL I input my credentials and get a Error 404 - Page Not Found.
I dont have any issues with Outlook Anywhere and clients are working fine. The tests come from this article and I am wondering if they are still valid for Exchange 2013 so need some help:
https://techlib.barracuda.com/BMA/EnableRoH
Does anyone else get the 404 error when they try the RPC virtual directory? If I got rpc/rpcproxy.dll that works fine and no issues.
We have Outlook Anywhere configured for NTLM authentication so maybe this is an issue and should be Basic?I did some digging in the CAS RPC logs and I found this connection attempt:
<snip>
2014-06-18T15:22:40.902Z,CAS-SERVER,RpcHttp,"S:Stage=EndRequest;S:UserName=domain\admin;S:OutlookSessionId=""{1A731432-5548-402F-892A-C9FE489BB78D}"";S:AuthType=Basic;S:Status=404 Not Found;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.domain.local:593;S:RequestId=7b1e355e-6448-4ed4-8112-8ab13d88a76f;S:ClientIp=192.168.0.17"
</snip>
As you can see the 404 Not Found is for the request to /rpc. I am wondering if maybe this has changed in Exchange 2013 SP1? Or have I got a bigger issue here? -
I am not sure if this is a BUG or this is as intended. Typically if a mailbox is 'deleted' from the EAC or ECP console the user account is disabled and the mailbox is marked for removal (soft-delete) until the retention policy expires the item (default
30 days). However we deleted a mailbox and the mailbox was purged immediately as well as the user was moved to the hidden recycle bin in Active Directory.
We replicated this issue twice in a DAG environment, we do not have this issue in a non-DAG environment.
Question: Other than restoring from the backup, is there a way to recover the mailbox?
Thank You,
-Jake
Jacob Evans Jake of All TradesHi,
I tested in my lab, Exchange 2013 CU1 with DAG deployed, if I deleted a mailbox from EAC, then it would be a disconnected mailbox and the associated Active Directory user account was also deleted. I could find it under the Disconnected Mailbox.
Was the mailbox logged ever?
If you delete a mailbox that you never log in, it won't show as disconnected mailbox.
And for the question :"Question: Other than restoring from the backup, is there a way to recover the mailbox?", I'm afraid you have to recover from backup.
Best regards,
Belinda Ma
TechNet Community Support -
Crystal report 8.5 export to csv and rtf format not working with office 2013
Hi Experts,
Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
i debugged the code and found the application hangs at function Report.Export(False).
below is the code snippet
.PDFExportAllPages = True 'ePDFExportAllPages
.PDFFirstPageNumber = ePDFFirstPageNumber
.PDFLastPageNumber = ePDFLastPageNumber
.RTFExportAllPages = True 'eRTFExportAllPages
.RTFFirstPageNumber = eRTFFirstPageNumber
.RTFLastPageNumber = eRTFLastPageNumber
.UseReportDateFormat = eUseReportDateFormat
.UseReportNumberFormat = eUseReportNumberFormat
.UseReportNumberFormat = eUseReportNumberFormat
.XMLAllowMultipleFiles = eXMLAllowMultipleFiles
.XMLFileName = eXMLFileName
Report.Export (False) ----Application hangs here and eventually crash
Looking forward for your help, as it is very urgent
Regards
MohitHi Mohit
CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Hi Experts,
I am facing issue while installing exchange 2013 sp1 in mixed(2007, 2010 and 2013) environment, the issue is: CAS role not installing/configuring "Echangeweb" (ews) virtual directory if i install only CAS role. If i install CAS role and mailbox
role then there is no issue, everything is fine.
In single CAS role installation, "EWS" folder is creating inside "Exchangeweb" folder but it shows empty folder.
If any one have any idea please let me know, why this is happening? was i am doing anything wrong while installing?
Regards,
Ravi Nalla
Hewlett-Packard
ravinallaHi Ravi,
Agree with Martina. I install Exchange 2013 CAS server and Mailbox server separately. "exchweb" folder exists on Mailbox server only. Here is the exchweb folder information on Mailbox server for your reference.
Here is the ews folder information on CAS server for your reference.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Issue with Update Rollup 5 for Exchange 2010 SP3 - Mailboxes that were auto mapped not working
Below is my response in another thread but creating a new one in the hopes that someone has the same issue and a solution besides mine below.
Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.Not sure why it was suggested to use the auto mapping feature to grant permissions because that is the component that is causing the issue. Also, there is nothing wrong with the auto configuration because the user can access their own mailbox just fine and
also select mailboxes in their Outlook that were NOT auto mapped.
With that said, here is how I fixed them all.
Remove the permissions using the Exchange Console. Don't forget Send As
Wait about 15 minutes. The mailbox should disappear from the users Outlook
Open an Exchange PowerShell window and run the following command:
.\add-mailboxpermissionsnoautomap.ps1 -Identity mailbox -User user -AccessRights FullAccess
Have the user add the mailbox to their Outlook using the manual process.
All is well....
If you don't have the PS script add-mailboxpermissionsnoautomap.ps1, you can download it. I stumbled across it a few years ago and use it all the time. If you can't find it, just use the Exchange built in command for adding mailbox folder permissions but
specify automap $false.
The idea here is to grant the user access without auto mapping. -
Outlook 2013 Auto Account Setup for Linked Mailbox Not working
We've created a linked mailbox, in Exchange 2013 (in domain1), for a user in another AD forest, domain2. We have the AutoDiscover service configured in the other AD forest as well. Our only issue now is trying to find a way to get the Outlook Auto Account
Setup to automagically configure a user's profile the first time Outlook 2013 is started. If we type in the user's email address and name and click Next, the profile is created successfully.
I spoke to Microsoft support who helped me confirm that AutoDiscovery was configured correctly in the other forest. Reading this information (
https://technet.microsoft.com/en-us/library/bb124251.aspx ) on AutoDiscover, I found what may be the issue. It notes that
"If the Outlook client is joined to a domain, the user's domain account is used."
Since the linked mailbox is associated with domain1, Outlook looks like it cannot use the domain account from domain2. I wonder if there might be a registry hack to bypass this and force Outlook clients in domain2 to look at email addresses in domain1?
Orange County District AttorneyHi,
According to your description, I noticed that “If we type in the user's email address and name and click Next, the profile is created successfully”. Do you mean the linked mailbox can be setup automatically when you fill in the Name and E-mail Address in
the Auto Account Setup page? For example:
If that is the case, the autodiscover service in Exchange side should be configured correctly and it is working for Outlook client automatically account setup.
If the account can’t be setup automatically when using autodiscover service, please
verify that the Master Account (Domain2\User1) has full access to the Linked Mailbox ([email protected]) as well as the smtp address using the cmdlets Get-Mailbox and Get-MailboxPermission in Exchange server:
Get-Mailbox [email protected] | fl PrimarySmtpAddress,*Type*,*Link*
Get-MailboxPermission [email protected] | fl
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING
The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
But I am able to access the Configuration manager and TCP/IP are enabled.
I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
Tks - VinayReporting Service
http://msdn.microsoft.com/en-us/library/jj219068.aspx
http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
Please find the helping URL
Thanks
Jaison A
http://infomoss.blogspot.in
Maybe you are looking for
-
Understandng the callable object within GP
Hi All, I have basic question on callable objects in GP. I would like to know how the Adobe form content gets persisted with in GP . Example : We have 4 steps in a GP process , one requestor and two approvers. Each step is a webDynpro callable object
-
Good morning all, I am working with Acrobat Pro 10. Thi smorning I need to create an entry field that will represent a percentage. I need to knkow if it is possible to set the field up so it requires the user to input a seven digit decimal per the in
-
Regarding webservice call in webdybpro application
Hi Friends, i have wriiten application using webservices(using EJB) i need to call that webservice in webdybpro... In one of method it takes 100+ inputs and gives me result... But when in webdynpro when i set input parametrs 100 and execute that we
-
Log files for successuly send EMAIL
How to configure SMTP_OUT or SMTP_IN to make a log file with the successfuly send EMAIL ?
-
The Lightroom 1.1 update will be available from Adobe.com later this week. I apologize for the confusion for those that are patiently awaiting this release, but during the course of delivery testing, the update was publicly available through the Adob