MS sql test converted to long and job log states that 1 row read at time

I am going from ms sql to ms sql server. The source text datatype is being covnerted to a long. No problem there. However, when the job runs, there is a warning: Rows per committ has been reset to 1 because table conatins a long column.
11.7 of DI
How can I get around this?

Michael,
This is indeed a limitation in the DI 11.7 (and earlier) releases which might result in a slower performance when loading data with long or CLOB datatypes.
In DI XI 3.0 (or version 12.0) we significantly improved the large object support. Main improvements were supporting BLOB (in addition to CLOB), extending support to more BLOB/CLOB datatypes for all databases and an optimized intermediate storage of the large objects. Removing the commit=1 restriction was a side effect of these optimizations.
Ben.

Similar Messages

I updated to Firefox 4.0.1 this morning. Norton 5.5 is now disabled and the message states that it is incompatible with 4.0.1. I need the Norton features enabled. Can I go back to 4.0 until this is rersolved?

I updated to Firefox 4.0.1 this morning. Norton 5.5 is now disabled and the message states that it is incompatible with 4.0.1. I need the Norton features enabled. Can I go back to 4.0 until this is resolved?

Please do a Live Update to the Norton product.
They have provided an important update to Firefox 4.0.1.

HT4623 Im trying to do a ios update and it keeps saying that it cant at this time because Im not connected to the internet. I am connected . What is the problem the ios update is 6.1.1

Im trying to do a ios update and it keeps saying that it cant at this time because Im not connected to the internet. I am connected . What is the problem the ios update is 6.1.1

Who is helping here. I'm asking the same question. .???.

My secondary e-mail address used on my daughter's ipod can no longer work. It states, that it is already in use with another apple id. She used it for weeks before this happened.

My secondary e-mail address used on my daughter's ipod can no longer work. She uses this as her imessage texting. First it needed to be verified. Once I tried to verify it on appleid support, It states, that it is already in use with another apple id. She used it for weeks before this happened.

Maybe:
iOS: Troubleshooting FaceTime
iOS: Troubleshooting FaceTime and iMessage activation

My iPhone 5c won't connect to home internet. I have an Actiontec router and my phone shows that I'm connected but no IP address comes up on my phone and Safari and other Apps state that I'm not connected to the internet.

I recently purchased an iPhone 5c and for some unknown reason I can't connect to my wireless router's network at home. I've tried establishing a seperate IP address, manually adding the iPhone device, and even spent an hour with Centurylink's IT support and they couldn't figure it out. They said it was an iPhone error. I had an iPhone 3 about 1 1/2 years ago that had the same problem. I ended up getting rid of the phone because I couldn't solve this problem before. I thought a newer phone would not have the same problem.
My phone shows that I'm connected to my home internet, but when I open up network information for my home internet there is no IP Address listed. Safari and my other apps also state that I'm not connected to the internet. I'm ready to sell my phone back and go to an Android since I didn't have trouble connecting with it before. We also have a Macbook and iPad that both connect to the internet just fine. Please....oh please help.

I was having the same problem; I tried all the recommended fixes in the "more like this" and nothing worked, but finally found the answer. Try this: http://themiddleofthestreet.blogspot.com/2013/11/if-your-iphone-5s-wont-connect- to-wifi.html

I have uninstalled and reinstalled itunes several times now, and it still states that I have not downloaded the 64 bit version and therefore my iphone 5s cannot sync.

I have contacted apple support and followed the steps to uninstall itunes on my laptop, and then reinstalled itunes from the apple website. and when i connect my iphone to my computer it states that it cannot sync due to it not being the 64-bit version. I have done this at least 3 times now and it still won't connect. I am beyond frustrated. Granted, I use a PC for itunes as opposed to a Mac. However, I have never experienced this many problems and difficulties in the past. I have been use an ipod or iphone for at least 10 years.

First, plug off your iPod.
Then uninstall iTunes + all of Apple services (google them).
Restart the PC.
Install iTunes.
If that doesn't help, try this:
http://support.apple.com/kb/TS1567
You should consider moving to Windows 7.
Cheers.

Need a VB-Script that read a txt-file and only the lines that are new since last time

Hi,
I need help to write a VB script that read all new lines since the last time.
For example: The script reads the textfile at specific time, then 10 minutes later the script read the file again, and it should now only read the lines that are new since last time. Anyone that has such a script in your scriptingbox?
cheers!
DocHo
Doc

Based on the excellent idea by Pegasus, where is a VBScript solution. I use a separate file to save the last line count read from the file, then each time the file is read I update the line count. Only lines after the last count are output by the program:
Option Explicit
Dim strFile, objFSO, objFile, strCountFile, objCountFile, strLine, lngCount, lngLine
Const ForReading = 1
Const ForWriting = 2
Const OpenAsASCII = 0
Const CreateIfNotExist = True
' Specify input file to be read.
strFile = "c:\Scripts\Example.log"
' Specify file with most recent line count.
strCountFile = "c:\Scripts\Count.txt"
' Open the input file for reading.
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFile = objFSO.OpenTextFile(strFile, ForReading)
' Check if the line count file exists.
If (objFSO.FileExists(strCountFile) = False) Then
    ' Initial count is 0, so all lines are read.
    lngCount = 0
Else
    ' Open the line count file.
    Set objCountFile = objFSO.OpenTextFile(strCountFile, ForReading)
    ' Read the most recent line count.
    Do Until objCountFile.AtEndOfStream
        lngCount = CLng(objCountFile.ReadLine)
    Loop
End If
' Read the input file.
lngLine = 0
Do Until objFile.AtEndOfStream
    ' Count lines.
    lngLine = lngLine + 1
    strLine = objFile.ReadLine
    If (lngLine >= lngCount) Then
        ' Output the line.
        Wscript.Echo strLine
    End If
Loop
' Close all files.
objFile.Close
If (lngCount > 0) Then
    objCountFile.Close
End If
' Ignore last line of the file if it is blank.
If (strLine = "") Then
    lngLine = lngLine - 1
End If
' Save the new line count.
Set objCountFile = objFSO.OpenTextFile(strCountFile, _
    ForWriting, CreateIfNotExist, OpenAsASCII)
objCountFile.WriteLine CStr(lngLine + 1)
objCountFile.Close
Richard Mueller - MVP Directory Services

I have an older airport express and my computer states that the air port utility version does not support it. Do I need to download an update? My Imac is from SEP of last year, the version with the optical drive

I have an older airport express. My airport utilities states that it does not support this base station. I am try ing to use the airport express in conjunction with a base station to air play my itunes library in another room. I have mountain lion on my Imac (purchased new in SEP of last year. My Imac was the last issued with an internal dvd drive.

Unfortunately, Apple discontinued support of the older AirPort base stations with the introduction of Lion and Mountain Lion.
You might be able to use a somewhat complicated workaround.....not supported by Apple.....if you want to try to use the older AirPort Express.
See this thread for details:
https://discussions.apple.com/message/21397085#21397085
More background info here:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

How do I upgrade Adobe reader - currentlyevery time I try to download a PDf file on my macpro I get a grey screen and a dialog box that says adobe reader is blocked for this website...

Help - a couple of weeks ago I tried up upgrade adobe reader but it never completed loading as far as I can find / that night would never finish
( how would I know , where would I check?)
now every time I need to download a PDF file ( dental claim forms tonight) I get a grey screen with a dialog box that says Adobe reader blocked for this site
and that happens on any site where I am trying to download a PDF…?

What is your operating system? Reader version? Downloading from what browser?

Cisco Supervisor Desktop show "Agent Logs - call" and "Agent Logs - state" in N/A ::: UCCX 8.5.1

Hi team.
The Cisco Supervisor Desktop don't show any logs in the "Agent Logs - State" and "Agent Logs - Call" in some agents.
I restarted the Cisco Desktop Services in CCX Serviceability but the issue continue.
I appreciate any help respect this case.
Thanks a lot.
ErnestoG

Hi Ernesto,
Did you click or selct the Specific Agent\Inbound call which is currently being handled by the Agent. From the Screenshot you have attached (first one) doesn't look like the call has been selected.
Please select or click on that Specific Agent\Inbound call from CSD and check these values.
Hope this helps.
Anand
Please rate helpful posts !!

I have an Iphone 4s and have just gotten a new computer. I would like to transfer/sync my contacts, photos etc to my computer so that when I update my Iphone I won't lose everything. At them moment , when I try and sync it states that I will lose everythi

I have an Iphone 4s and have just gotten a new computer. I would like to transfer my contacts, photos etc. from my Iphone to my new computer so that when I need to sync my phone I will retain everything just as it is now on my Iphone. At the moment, when I try and sync my computer states that I will lose everything on my Iphone. Please help someone, I have too much on my phone to lose it. Thanks

The iphone is not a backup device. Everything should be on your computer.
Copy everything form your old computer, or your backup copy of your old computer, to your new one.

Load-modules.sh and other log stuff that i'm worried about

Hello everyone.
I was going through my log files today. Its been the first time I've really looked at them since I reinstalled (about two weeks ago).
Anyway, some interesting stuff in there this time.
First off load-modules.sh is dropping a lot of errors into everything.log (the other stuff is there so you know where in the log you are looking):
Feb 17 14:32:23 leviathon kernel: skge eth0: Link is up at 100 Mbps, full duplex, flow control both
Feb 17 14:32:23 leviathon kernel: NET: Registered protocol family 10
Feb 17 14:32:23 leviathon kernel: lo: Disabled Privacy Extensions
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001106d00002282sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001106d00004282sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'dmi:bvnAmericanMegatrendsInc.:bvr1010.003:bd01/26/2005:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASUSTeKComputerInc.:rnA8VDeluxe:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001106d00007282sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001022d00001100sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:LNXSYSTM:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001106d00003282sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001106d00001282sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001022d00001101sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001002d00004E48sv00001002sd00004F72bc03sc00i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: Not loading module alias 'pcspkr' because it is blacklisted
Feb 17 14:32:16 leviathon load-modules.sh: 'pci:v00001002d00004E68sv00001002sd00004F73bc03sc80i00' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'platform:vesafb' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: Not loading module 'pcspkr' for alias 'platform:pcspkr' because it is blacklisted
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:LNXSYBUS:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:16 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0800:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0200:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0501:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0C04:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0000:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0100:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:PNP0501:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:17 leviathon load-modules.sh: 'acpi:device:' is not a valid module or alias name
Feb 17 14:32:21 leviathon init: Entering runlevel: 5
Its a builder board, an asus A8V deluxe, with a radeon 9800 AIW for the graphics. I'm using udev 151-3 and mkinitcpio 0.6.2-1 from core.
Should load-modules.sh be trying all these aliases? I do have autodetect as one of my mkinitcpio.conf hooks. Is that hook responsible for trying to load all these aliases? If so, I'm pretty sure I can get by with less in my initcpio. I don't even have a sata drive in this box, so I should be able to get by with HOOKS="base udev pata filesystems"
And on a slightly related note, does anyone else get these while they are running X?
Feb 18 14:13:47 leviathon kernel: X:3373 freeing invalid memtype d02a2000-d02b2000
Feb 18 14:13:47 leviathon kernel: X:3373 freeing invalid memtype d02b2000-d02c2000
Feb 18 14:13:47 leviathon kernel: X:3373 freeing invalid memtype d02c2000-d02d2000
Feb 18 14:13:47 leviathon kernel: X:3373 freeing invalid memtype d02d2000-d02e2000
Feb 18 14:13:47 leviathon kernel: X:3373 freeing invalid memtype d02e2000-d02f2000
Feb 18 14:13:47 leviathon kernel: X:3373 freeing invalid memtype d02f2000-d0302000
It used to happen sometimes on the xorg-server 1.6 line, but seems to happen much more while I'm running xorg-server 1.7. A quick count through everything.log, there are about 80 of those messages with a simultaneous timestamp, and about 40 earlier from me playing the UT2004 demo, all in adjacent memory ranges.
Could this be causing it? (this is while X is loading)
Feb 18 14:13:48 leviathon kernel: agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
Feb 18 14:13:48 leviathon kernel: agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
Feb 18 14:13:48 leviathon kernel: pci 0000:01:00.0: putting AGP V3 device into 8x mode
Feb 18 14:13:49 leviathon kernel: [drm] Setting GART location based on new memory map
Feb 18 14:13:49 leviathon kernel: [drm] Loading R300 Microcode
Feb 18 14:13:49 leviathon kernel: platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
Feb 18 14:13:49 leviathon kernel: [drm] Num pipes: 2
Feb 18 14:13:49 leviathon kernel: [drm] writeback test succeeded in 1 usecs
Feb 18 14:13:49 leviathon load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Also, in Xorg.0.log, there is a message about radeon microcode:
(EE) RADEON(0): Microcode: cannot load microcode
Note: I have kernel modesetting disabled for the time being. I couldn't get it to start early or late. Both gave me out-of-sync errors on my monitor.
Any advice?

dunno why but, to me, this happens when i blacklist modules in MODULES rc.conf section
if you blacklist stuffs in modprobe.d/<whatyouwant> and add it to mkinitcpio.conf problem disappear
[edit] anyway, it's harmless for me. things are done correctly in all cases
don't have had time to investigate init scripts
sorry but no advice for X problem
Last edited by max.bra (2010-02-19 09:35:56)

Aborted Lion installation to backup data and now it states that Lion is installed - but it is not. What to do?

I downloaded Lion from the Mac App Store and started to installed it but stoped the installation when I came to the item of backup data. I then backuped my data and when I opened the Mac App Store again it stateds that Lion is installed - this is not the case. Can I find the Lion download somewhere else on my Mac or what cane I do to install it?

I downloaded Lion from the Mac App Store and started to installed it but stoped the installation when I came to the item of backup data. I then backuped my data and when I opened the Mac App Store again it stateds that Lion is installed - this is not the case. Can I find the Lion download somewhere else on my Mac or what cane I do to install it?

Are there any memory and cpu logging extensions that is addon, not process oriented, that will detect ram/cpu usage, even within the main Firefox process?

And why wasn't this a feature in FF already? I hear it was, but it was dropped in FF4 as part of some kind of feature freeze? Why was this most important of all features removed, and how can I patch this? So I can use my browser properly again. Maybe an addon that would make about-addonsmemory detect that kind of stuff would do, maybe something that forces all addons to operate within the plugin container. Or maybe just something that will moniter everything right.

The CPU usage part is the most important

How do I change the black backgound and faint printed options that I cannot read?

The background above the page that I am viewing is all black with 'File', 'Edit', etc in faint white which is difficult to read. How do I change it and make it all easier to read?

can you provide a screenshot to illustrate your problem?

MS sql test converted to long and job log states that 1 row read at time

Similar Messages

Maybe you are looking for