Msata Help - Difference between two Renice Version questions

Hello, I have a W520. I'm looking to put in an msata card and take ou the WiMax that's in there.
I saw two different versions of simliar cards from Renice.
Renice K3VLAR
Renice X3
Can anyone tell me the difference bettwen these two? I haven't found a thing and how well they would work in the W520?
Thanks
Josh

The two products linked are exactly the same. The only other product that Renice have in the mPCIe form factor is their mPCIe (netbook) product. It has a different pinout to the mSATA product.
Summary: if it's a mSATA Renice product then it's good to go in a W520.
12.5" HP 2560P i5-2540M 2.6 8GB 60GB Renice X3.SSD 500GB/DVD HD3000 + [email protected] DIY eGPU
•ODD caddy . •SSDs 1.8" ZIF . mSATA/1.8" . •Overclocking PLL pinmod . setPLL . dual/quad-IDA core 2 bios • Past 13" Dell E4310, E4300 12" 2530P, 2510P
DIY eGPU • Thin-and-light Sandy Bridge iGPU, dGPU and eGPU notebooks

Similar Messages

[Urgent] Need help calculating difference between two dates

I'm trying to write a code to display the current day and time, then accept two dates from the user and display the difference between the two dates. To display the current date and time, I've used the SimpleDateFormatter library but I'm having difficulty calculating the difference between two dates. Could someone please help me with this?
Below is my code so far
import java.util.Date;
import java.util.Scanner;
import java.text.SimpleDateFormat;
public class DateFormatter {
     public void displayNow()
          Date todaysDate = new Date();
          SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MMM-dd HH:mm:ss");
          String formattedDate = formatter.format(todaysDate);
          System.out.println("Today's date and time is: "+formattedDate);
     public void calculateDifference(Date startDate, Date endDate)
          /* This is whre i need help! */
     public static void main(String[] args)
          DateFormatter df = new DateFormatter();
          Scanner sc = new Scanner(System.in);
          df.displayNow();
          System.out.println("Please enter a date: ");
          String date1 = sc.next();
          System.out.println("Please enter another date: ");
          String date2 = sc.next();
}The methods displayNow() and calculateDifference(Date startDate, Date endDate) are essential and cannot be skipped out.

tarahmarie101 wrote:
Dude. I've tried doing assignments under pressure, and it doesn't work. Here's a piece of free advice. Start earlier next time, don't put "urgent" in the title of your post b/c it just pisses people off around here--and is a sure sign of an overdue homework assignment which no one around here likes helping with, and try to ask intelligent questions--don't just say "Help me!"
Of course, it takes some time to learn what the intelligent questions are. You have my sympathy. Try asking questions about how to do a particular task, instead of asking people to tell you what to do. It starts to get easier after a while.
actually dude i started on this on monday.. but there were so many other stuff to do along with this.. and i did try referring up the Calendar utility but it was a bit confusing actually.. it was only after that did i come to this forum.. nor am i very good at Java.. anyhoo thanks for your sympathies :P

Difference between two cells?

hi all, I am very new to using a mac, but am loving it so far no problems at all! I got 1 question I couldn't find an answer to tho, is there a way in numbers to have one cell display the difference between two other cells? I can do it by simple subtraction but if I change the values in the other cells some time the answer displays as a negative and others a positive. I would always like it to display as a positive.
example:
200 150 the difference between these two cells is 50
150 200 the difference between these two cells is 50
thanks for any help,
Chupagod

You want to display the absolute value of the difference. Your formula should be ABS(cell1-cell2).

Difference between 4.7 version and 6.0 version

what is the difference between 4.7 version and 6.0 version particularly as far as SD is concerned?

dear vinayak
There are so many differences between the version in different objects
I will explain in two or more objects the difference
1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 t-code
and also there is no CIN tab in that version
but it is there in the 4.7 EE version
This is the major change from the 4.6cc to 4.7EE
2. in 4.7EE there is some settings that are related for CIN
which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
But we can do the same in the 6.0 version
These are the some of the settings that are differed in the two versions and in that two objects
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
Re: SAP version differences 4.5b, 4.6c and ECC6.0
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
rewards if it helps
siva

SSRS expression for difference between two currency values

Hi All;
I need to get the difference between two currency values
Below is my report
I need to get differene between Actual Income and Profile Income and this value should be in "£" In this example it should be £0.00
Any help much appreciated
Thanks
Pradnya07

=sum(Fields!ProfileIncome.Value - Fields!ActualIncome.Value)
This could have either field first, but depends on which field is expected to be larger. You would then format the textbox to show in pounds.
HTH

As to the data type of the data type of the difference between two date type of datas

Hi,
I have a question about the data type of the difference between two date type of datas.
There are two date type of datas as:
SSHIPMENTS.RECEIVEDATETIME
SSHIPMENTS.PROMISEDATETIME
I try to use the following SQL Script in Oracle SQL*Plus as:
SELECT CASE
WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:00:00.000' THEN 'OnTime'
WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:30:00.000' THEN '60-89 Minutes'
ELSE '3+ Hours'
END
FROM SSHIPMENTS;
The error message of "Invalid Number" for the '000 01:30:00.000' happens.
I don't know if the data type of the interval is wrong.
Many Thanks,
Cathy

SELECT CASE
WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss')) < '010000' THEN 'OnTime'
WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss'))< '000 01:30:00.000' THEN '60-89 Minutes'
ELSE '3+ Hours'
END
FROM SSHIPMENTS;
just try it out..

How to find the structural difference between two tables

Hi all,
How to find the structural difference between two tables .
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
Thanks,
P Prakash

you could try something similar to this, for each table pair that you want to compare:
SELECT 'TABLE_A has these columns that are not in TABLE_B', DIFF.*
FROM (
        SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
          FROM all_tab_columns
         WHERE table_name = 'TABLE_A'
         MINUS
        SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
          FROM all_tab_columns
         WHERE table_name = 'TABLE_B'
      ) DIFF
UNION
SELECT 'TABLE_B has these columns that are not in TABLE_A', DIFF.*
FROM (
        SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
          FROM all_tab_columns
         WHERE table_name = 'TABLE_B'
         MINUS
        SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
          FROM all_tab_columns
         WHERE table_name = 'TABLE_A'
      ) DIFF;that's assuming, column_name, data_type and data_length are all you want to compare on.

How to get the difference between two columns in a column group

Hi All,
My first time here and really new to programming. I would like to get the difference between 2 columns that are inside
a column group.
Here is my sample table below: The Column Group is PeriodNumber and can only choose 2. like 1 and 2.. I would like to have a third row which will simply calculate the difference between the amounts in PeriodNumber 1 and 2.
PeriodNumber
Account 1 2
1) Cash 10,000 15,000
2) Receivables 12,000 11,500
3) Equipment 5,000 5,500
Total Assets 27,000 32,000

Hi yabgestopa,
From your description, you want to get the difference between two columns in a column group. After testing it in my environment, we can use custom code to achieve your requirement. For more details, you can refer to the following steps:
Copy the custom code below and paste it to your report. (Right-click report>Report Properties>Code)
Dim Shared Num1 As Integer
Dim shared Num2 As Integer
Public Function GetAmount(Amount as Integer, Type as String)
If Type = "1" Then
Num1=Amount
Else
Num2=Amount
End If
Return Amount
End Function
Public Function GetDif()
Return Num1-Num2
End function
Right-click the second column to insert a third column with Outside Group-Right.
Then use the expressions below in the matrix.
=Code.GetAmount(Fields!Amount.Value,Fields!PeriodNumber.Value)
=code.GetAmount(Sum(Fields!Amount.Value),Fields!PeriodNumber.Value)
=Code.GetDif()
The report looks like below.
If you have any questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Better estimation of phase difference between two signals with variable frequency!

Hello LabView Gurus,
Being a power engineer and having just a little knowledge of signal processing and labview, I have been pulling my hair out for the last couple of days to get a better estimation of phase difference between two signals.
We have two analog voltage signals; 1. sine wave (50Hz ± 1Hz) and 2. a square wave with exactly half of sine wave frequency at any time.
At the starting point of operation (and simulation/acquisition) both signals will have no phase difference. However, the square wave's frequency changes unpredictably for a just a few millisecond but then it gets synchronized with sine wave's frequency again. This means that the square wave will be phased out from its original position. The task of the labview is to find the phase difference between the two signals continuously.
My approach to determine the phase difference is to measure the time when sine wave crosses zero amplitude and the time when the very next square wave changes amplitude from zero volts to +ve voltage (I have a 0.5volts threshold just to avoid any dramas from small line noise). The difference between these times is then divided by the time period and multiplied by 360 to get this phase difference in angles.
As this part is just a small block of a big project, I can only allow 5000Hz sampling rate each for both signals. I read 500 samples (which means I read data from 5 cycles of sine wave and 2.5 cycles of square wave).
Now the problem is, as long as the frequency of sine wave stays constant at exactly 50Hz, I get a good estimation of the phase difference but when the frequency changes even a little (and it will happen in the real scenario i.e 50Hz ± 1Hz and the square wave's frequency is dependent of sine wave's frequency), the estimation error increases.
I have attached my labview program. From front panel, you can set the phase of square wave (between -180 and 0) and you should see the labview's calculated phase in the indicator box named 'Phase'. Then you can press 'Real Frequency' switch that would cause the frequency to change like it would in real operation.
You can observe that the estimation error increases after you push the button.
All I need to do is to reduce this estimation error and make it as close to the actual phase difference as possible. Any help would be greatly appreciated.
I am using LabView 2009 for this task.
The application is for electric machines and the stability/performance of machines under different faults.
Thank you for reading this far!
Regards,
Awais
Attachments:
v603.png ‏320 KB
v603.vi ‏186 KB

Jeff Bohrer wrote:
Basic math gives me a bit of pause on this approach. You are sampling at 50 times the frequency of interest so you get 50 samples per cycle. your phase resolution is 1/50th cycle or 7.2 degrees +/- noise. You will need to samlpe faster to reduce phase resolution or average multiple readings (at a time cost that is signifigant)
Jeff- (Hardly Working)
I am sampling at 100 times the sine wave's frequency and 200 times the square wave's frequency. Increasing the sampling rate completely solves my problem. But since I am acquiring several other inputs, I cannot afford a sampling rate higher than 5kHz.
F. Schubert wrote:
I'm not a signal processing expert, but here my basic understanding.
If you simulate sampling with 5kHz and a frequency of 50 Hz (and both are 'sync' by design), you always get an exact 5 periods. Any variation of your signals frequency gives you a propability to get 4 or 6 'trigger' events. That's an up or down of 20%!
The one measure to reduce such problems is using 'window functions'. They don't fit your current approach (counting instead of a DSP algorithm), so this needs to be reworked as well.
My approach would be to use the concept of a Locki-In amplifier. You need to phaseshift your ref-signal by 90°. Then multiply your measurement signal with the ref signal and the phase shifted ref signal. The obtained values for x/y coordinates of a complex number. Calculate the theta of the complex number (with the LV prim). Feed this in a low pass filter.
The trick on this is, that the square wave has harmonics in it, in this you are interested in the second harmonic which is the sine wave.
To get rid of the effect that the sync between sampling rate and ref signal frequency gives an error, you then can use the window I mentioned above (place it before the lock-in).
For a design that really plays well, use a producer-consumer design pattern to get the calculations done in parallel with the DAQ.
I suggest you to check on wikipedia for some of the keywords I mentioned. Go also for the external links which lead to great tutorials and AppNotes on the signal processing basics.
Sorry, it's not a simple solution I offer and we will have quite some conversation on this forum if you follow this path. Maybe someone else knows a simpler way.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml
An interesting view. the sine wave can indeed be looked as a second harmonic of the square wave. I will implement your idea and get back to you as soon as I get some results. But since I have very limited knowledge of signal processing, it might take me a while to get my hear around the solution you mentioned.

Date difference between two dates

hi All,
i have to right a stored proc to find the difference between two dates.
for example of i give
startdate as 4/1/2015 and enddate 14/1/2015
i should get 1 year , 10 days and 0 months .
i have tried the DateDiff function but it does not calculate the leap year.
please help.

DECLARE @from datetime
DECLARE @to datetime
SET @from = '20150104 8:00'
SET @to = '20150114 10:30'
SELECT DATEDIFF(minute,@from, @to) % 60 as Minutes
SELECT (DATEDIFF(minute,@from, @to) / 60) % 24 as Hours
SELECT DATEDIFF(minute,@from, @to) / (60 * 24) as Days
SELECT DATEDIFF(month,@from, @to) as Months
SELECT DATEDIFF(year,@from, @to) as Year
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Difference between two date in bex query

Hi all,
I need to do a difference between two date using formula variable processing type customer exit beaucause I must use factory calendar in the formula.
How can I do it?
Can you give me an example of the routine?
Thanks a lot
Gianmarco

Hi,
You can still use the same code to copy it and customize as per your need. All you need to do is to subract the dates using the class: CL_ABAP_TSTMP after converting to timestamp and resulting seconds you convert back to days....Please get help from the developers to do this...
Also, ensure that you write back this difference value to your variable so you get it on the reports for your calculations...
Cheers,
Emmanuel.

Find the difference between two columns in an ssrs matrix ? MSCRM

Hi All,
I am working in reporting part of our project (On-line MSCRM 2013) & in reporting services.
I am trying to create report using fetch xml based. Below is the snap what we required the result.
Kindly help me, how to get the difference in both column. (Its a matrix table where year is grouped).
We need difference between both year Like (Plan Revenue of 2013 & Plan Revenue of 2014 difference in Plan Revenue Diff section) and same for Actual
Revenue.
https://social.microsoft.com/Forums/en-US/054d5ca4-0d38-4dc6-84a8-88866cc228fe/find-the-difference-between-two-columns-in-an-ssrs-matrix-mscrm?forum=crmdevelopment
Thanks,
Mohammad Sharique

Hi Bro,
I used parametrized option for year and done the report,Currently we are getting values in Difference column now i want to show
that value in percentage. How can we show the percentage based on that value. Means i want to show the Difference in Percentage.
Kindly help me i tried but getting some issue. Below i am mentioning the code and snap with result.
Below expression using to showing Plan Revenue in Percentage for year.
=
Sum(IIF(Fields!new_year.Value =Parameters!StartYear.Value,cdec(Fields!new_planrevenueValue.Value/1000), cdec(0)))
- Sum(IIF(Fields!new_year.Value =Parameters!EndYear.Value,cdec(Fields!new_planrevenueValue.Value/1000), cdec(0)))
/IIF(Sum(IIF(Fields!new_year.Value = Parameters!StartYear.Value,cdec(Fields!new_planrevenueValue.Value/1000), cdec(0)))>0,
(Sum(IIF(Fields!new_year.Value = Parameters!StartYear.Value,cdec(Fields!new_planrevenueValue.Value/1000), cdec(0))))
,1)
)*100))
Result issue is as below in snap with highlighted in red colour.
Kindly help me on this issue also :)

Extract Time from date and Time and Need XLMOD Funtion to find the Difference between Two Time.

X6 = "1/5/15 5:16 AM" & NOW ....................difference by Only Time
not date
X6 date and Time will be changing, Its not Constant
Dim myDateTime As DateTime = X6
            Dim myDate As String = myDateTime.ToString("dd/MM/yy")
            Dim myTime As String = myDateTime.ToString("hh:mm tt")
            Dim myDateTime1 As DateTime = Now
            Dim myDate1 As String = myDateTime1.ToString("dd/MM/yy")
            Dim myTime1 As String = myDateTime1.ToString("hh:mm tt")
Need to use this function to find the Difference between Two Time. due to 12:00 AM isuue
Function XLMod(a, b)
    ' This replicates the Excel MOD function
    XLMod = a - b * Int(a / b)
End Function
Output Required
dim dd = XLMod(myTime - myTime1)
Problem is myTime & myTime1 is String Need to convert them into Time, Later use XLMOD Funtion.

Induhar,
As an addendum to this, I thought I'd add this in also: If you have two valid DateTime objects you might consider using a class which I put together a few years ago
shown on a page of my website here.
To use it, just instantiate with two DateTime objects (order doesn't matter, it'll figure it out) and you'll then have access to the public properties. For this example, I'm just showing the .ToString method:
Option Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
Dim date1 As DateTime = Now
Dim date2 As DateTime = #1/1/1970 2:35:00 PM#
Dim howOld As New Age(date1, date2)
MessageBox.Show(howOld.ToString, "Age")
Stop
End Sub
End Class
I hope that helps, if not now then maybe at some point in the future. :)
Still lost in code, just at a little higher level.
Thanx frank, can use this in Future....

What is the differences between the older version of Oracle Financials and the 11 i

What is the differences between the older version of Oracle Financials and 11i?

Vijay,Thanks for your answer,but I am still not clear about it,I have a instance to describe my question at detail.
    If there is a final product A, and the planning strategy for A is 20(MTO), the procurement type of A is F(external procurement) at the view mrp2 in the material master datas.
step1: I creat a sales order.
step2: run MRP for A.
step3: transfer the purchase requistion into a purchase order,and the field of acc.***.cat. in the purchase order will be filled out M automatically, because the acc.***.cat. in the planning strategy 20(MTO) is set with E.
    Well, the purchase order is created, what is the relationship between the sales order and the purchase order? What will be happened about costing between the SO and the PO?
    If I delete the E, I make the PO become a standard PO, what is difference between standard PO and the PO including E?
Best Regards
Bob

Function Module to find the Difference between two times.

Hi All,
Wud you plz let me know the Function Module to find the Difference between two times.
Input Time1( Hours:Minutes) Time2 ( Hours:Minutes)
Need Output in Hours:Minutes only . ( No seconds Needed )
Ex :
Input :
       06:00 to 18:00 Output : 12:00
and 20:00 to 06:00 Output: 10:00 with +ve sign only. No -ve sign.
Thanks,
N.L.Narayana

check this .
data : p_timel like sy-uzeit,
       p_timeh like sy-uzeit,
       diff like sy-uzeit,
       di(8) type c .
       p_timel = '200000'.
       p_timeh = '060000'.
       diff = p_timeh - p_timel.
       concatenate diff+0(2) ':' diff+2(2) into di.
       write:/ di.
also check for this.
       p_timel = '060000'.
       p_timeh = '180000'.
see if this can be implemented in ur code .
or else u can try with Fm L_TO_TIME_DIFF passing startdate enddate starttime endtime with UOM as MIN
hope this helps regards,
vijay

Msata Help - Difference between two Renice Version questions

Similar Messages

Maybe you are looking for