MSDTC Error on Send Port

Running BizTalk Server 2010, we've two identical Send Ports in two different BizTalk applications, both calling same stored procedure with same properties but one works and the other fails with the following error.
An error occurred while processing the message, refer to the details section for more information Message ID: {B44DCA75-BC09-40AA-99A3-09A6A9BC5CBB} Instance ID: {1074A172-0ADB-4045-A27D-EE6FC94D285A}
Error Description: System.Transactions.TransactionManagerCommunicationException: Communication with the underlying transaction manager has failed. ---> System.Runtime.InteropServices.COMException: The MSDTC transaction manager was unable to push the transaction
to the destination transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot find each other by their NetBIOS names, or the support for network
transactions is not enabled for one of the two transaction managers. (Exception from HRESULT: 0x8004D02A) at System.Transactions.Oletx.ITransactionShim.Export(UInt32 whereaboutsSize, Byte[] whereabouts, Int32& cookieIndex, UInt32& cookieSize, CoTaskMemHandle&
cookieBuffer) at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts) --- End of inner exception stack trace --- Server stack trace: at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult
result) at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result) at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result) at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult
result)
If it's a problem with the MS DTC or the stored procedure permissions, it should not work for both of these but it is working for one of them, which means the access and permissions
are fine, really bowled over this, any idea, what could be wrong?
Thanks
Syed

Hi Syed,
Your problem lies with firewall blocking your SQL outbound call .You need to Open the Ports to do the communication
Error ":Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot
find each other by their NetBIOS names, or the support for network transactions is not enabled for one of the two transaction managers."
Thanks
Abhisek

Similar Messages

Error in send port executed procedure in Biztalk and SQL Server

Hi,
I have a send port which call the below stored procedure
USE
GO
SET
ANSI_NULLS
ON
GO
SET
QUOTED_IDENTIFIER
ON
GO
ALTER
@ProcessId
VARCHAR
(100),
@FilePath
we are revieving the Error as below and the send port is getting suspended
System.Data.SqlClient.SqlException: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 2.
can anyone just help me with this?

Begin TRANSACTION
END TRY
BEGIN CATCH
BEGIN
ROLLBACK TRANSACTION ;
END
Exactly, you have a BEGIN TRANSACTION and a ROLLBACK in error case, but no COMMIT at all.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error on Send Port configured using HTTP adapter

Hi All,
For Load balancing purpose we have created new host and host instance and changed send handler for send port configured using
plain HTTP adapter.
We are getting below error after change:
A password is mandatory if UserName is specified
Parameter name: Password
Please advice.
Thanks
Pooja Jagtap Software Engineer KPIT Cummins

Have you updated the password for your Host instance . Try restarting your host instance once .
Thanks
Abhishek

BizTalk Send Port Error

We are getting error on send port after some changes in the map, but there is no change in the map which is throwing error -
Event Type: Error
Event Source: BizTalk Server 2009
Event Category: (1)
Event ID: 5754
Date:  11/26/2013
Time:  1:14:22 PM
User:  N/A
Computer: XXXX
Description:
A message sent to adapter "WCF-Custom" on send port "SndABCD" with URI "mssql://ABCDSQLDB/INSTANCE/ABCDReport?" is suspended.
Error details: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
MessageId: {A79F62AD-3C63-4543-9FEF-2682CF83106A}
InstanceID: {941EBEF7-7008-451C-AEBE-C7407462F943}
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

I have checked below links already which suggest, gac the DLL, but did not work for me -->
http://social.msdn.microsoft.com/Forums/en-US/01791899-a0bf-451d-9004-fe8b696a9270/custom-functoid-the-system-cannot-find-the-file-specified?forum=biztalkediandas2
http://blogs.eliasen.dk/Technical/post/2010/01/17/TheSystemCannotFindTheFileSpecified.aspx
http://stevestechnotes.blogspot.com/2008_02_01_archive.html

IDoc Message: Invalid Sender Port in FM IDOC_INBOUND_SINGLE

Hi experts
For inbounding IDocs I use the FM IDOC_INBOUND_SINGLE.
My problem is, the IDocs always gets the status 56 with error message <Sender port in control record is invalid>.
I don't understand the message, because all ports are maintained in WE21.
When I execute BD84 for created IDocs everything is OK.
But my problem is, that I don't want to execute BD84 after every IDoc which will be created by the FM IDOC_INBOUND_SINGLE.
So could anyone help with the error message <Sender port in control record is invalid>.
Thx for every help

Hello Sachin
Thx for fast help.
However, a few minutes ago I solved the problem (debugged SAP-FM).
Problem had been, that direction was 1 instead of 2.

BizTalk 2013 SFTP Adapter Dynamic SFTP send port exception: Open remote file for write error

I am using BizTalk 2013 SFTP adapter. I defined a Dynamic One-Way
send port on BizTalk server administration.
Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Server stack trace:
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker.OpenRemoteFileWrite(String fileName, Int32 fileOffset)
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpFileWriterStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
Exception rethrown at [1]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId: {926F44F2-9180-4B33-96FF-9E4CBC459382}
InstanceID: {36A50A7F-63C4-48D9-903D-A33C85DDAE36}
Can you please assist with explaining why are we getting this exception?
Thank you for your help.

Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Hi Yaeli1,
From the error message above, please check the permission for file writing , it seems that this issue is related to access permission.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error when using 64-bit host in send port

Guys,
I am trying out a simple message routing scenario. I have created a send pipeline and have used the MIME/SMIME component in the encoding stage of the pipeline. My application has a receive and a send port with receive port configured to receive *.xml documents
and is using XMLReceive pipeline. My send port uses the pipeline I have explained above and contains a filter to BTS.ReceivePortName=="[receive port in the application]". The send port is also configured to use a certificate. The send handler is the 64-bit
BizTalk host. When I drop a message in the receive port, message in the send port gets suspended with error "Retrieving the COM class factory for component with CLSID {254B4003-2AA7-4C82-BB2E-18BA7F22DCD2} failed due to the following error: 80040154
Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
" However when I use a 32-bit host message on the send port gets encrypted as I expect. Has anyone faced this issue before and found a solution? BTW I am using BTS 2010 on 64-bit machine

http://msdn.microsoft.com/en-us/library/aa559177(BTS.10).aspx
This occurs because the MIME pipeline component is not supported in a 64-bit host instance. To resolve this, the host associated with the send and receive handler for the file adapter must be configured as a 32-bit only host. For more information on this
see How to Modify Host Properties. If you already have a 32-bit only host configured on the system and want to use it see Configuring the File Adapter for instructions on configuring the host(s) associated to the file adapter’s send and receive handler.
The following is signature, not part of post
Please mark the post answered your question as the answer, and mark other helpful posts as helpful, so they will appear differently to other users who are visiting your thread for the same problem.
Visual C++ MVP

Sender Port Error in SAP ECC for IDoc

Hi,
I am creating scenario IDOC -> XI -> JDBC with Customer Master IDoc.
After sending it with we19 he said "IDoc sent to SAP system or external program".
In we02 and we05 the IDOC it says "Data passed to port OK".
But in SM58, the IDoc ends in error saying
Transaction IDX1: Port SAPIDST100, client 600, RFC destination contains error.
What I identified that the port SAPIDST100 is the sender port in the IDoc being send. However, for PI we do not need to maintain sender port.
Business Systems:
Sender : SAP ECC
Receiver: SAPPID
Kindly provide your inputs.
Thanks
Rahul

Hi Rahul,
thanks for the information that your scenario is working fine.
But i want to clarify some points:
   - If you send out an IDoc from an ECC system, the senderport is filled with SAP+<system-id> by the SAP IDOC API,
     i.e. if your system id is "ABC", the senderport is "SAPABC"
      => your senderport SAPIDST does not match this template, so i assume you entered the value for the senderport
     manually in the idoc test utility WE19
   - if you send out an idoc, only the receiver port must be created in transaction WE21, it is not necessary to create
     the senderport in WE21, this is not necessary and did not solve your problem
- the idoc was send from ECC (application system with application IDoc metadata) to an XI/PI system (basis system
    without application idoc metadata
   The IDoc adapter on the pi system must analyze the IDoc segments and must know the idoc application metadata,
   but this is not known. So the idoc adapter on PI side looks at the senderport to identify the sender.
   In transaction IDX1 an rfc-destination can be configured to point to the sendersystem with that senderport
   With this rfc-destination the IDoc adapter tries to read the idoc aplication metadata from the ECC system and stores it on PI side.
   If there is no rfc-destination configured in transaction IDX1 on PI side you get the error mentioned in your request.
   I assume that in transaction IDX1 somebody configured the correct RFC-Destination.
I hope this clarification helps you to understand the error and the solution.
Kind regards,
Andreas Dahl

Outbound IDoc Error: Status Code 37 'Sender Port' is invalid

Hi
I have an Error when the Outbound IDoc is triggered.
It shows that 'Sender Port in Control Record is invalid'.
Status Code: 37.
I know that there are some issues with the Sender Port Definition.
Please help me out to solve this problem using some checkpoints at each and every step.
Reward Points Assured.
Regards,
Baburaj

Hi Baburaj Manickam
Good
Follow this simple procedure
1) Send an outbound IDOC data(MATMAS) to a flat file on client1(SENDER).
- Create File Port (WE21) for outbound file.
- Maintain Distribution Model (BD64) for sender ->receiver system.
- Create Partner Profile (WE20) for logical system.
- You can use this program RBDSEMAT (t/code BD10) to generate IDoc MATMAS file(s).
_ Then you can FTP the file(s) to receiver system.
2) Upload the flat file as an IDOC on the inbound sytem
which is Client2(RECIEVER).
- Create File Port (WE21) for inbound file.
- Maintain Distribution Model (BD64) for receiver -> sender system.
- Create Partner Profile (WE20) for logical system.
- You can use this program RSEINB00 to upload IDoc MATMAS file(s).
INBOUND IDOC PROCESSING:
Firstly attach your idoc to a process code.
In the process cod you can tell the system that the specified program should be triggered whenever an idoc of that type comes to the system.
Then you want to have a Z-function module for your idoc processing, if I understand correctly.The steps should be:
1. Create a z function module for idoc inbound posting (copy from a function module idoc_input_*).
2. Set Function Modules as Inbound: - Transaction BD51
3. Assign Function Modules to Logical Messages and Idoc types:- Transaction WE57
4. Create process codes : Transaction WE42, and link the z-function module.
5. Create partner profile: transaction WE20 and attach the message type and process code.
6. In the Z- function module, extract data from the idoc segments, do whatever processing you want to do, and then call BAPI_CREATE_SALES_ORDER_FROMDAT2.
Try the Trasaction WE19 for testing your inbound and outbound IDOCs
Good Luck and Reward me for the same
Thanks
Ashok.N

IDoc_02_Error passing data to port-Communication error when sending with HTTP

Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Getting error - A message going to a one-way send port is being suspended.

Hi,
I am getting the following error message (in the BizTalk administration console), on my Production servers, upon testing one of my BizTalk Interfaces, deployed on the same :-
A message going to a one-way send port is being suspended. Reason: The send port configuration corresponding to the message was not found.
This usually happens when a send port was deleted while it still had some active messages.
The same application is working fine on the Test environment.
Please note
à This is a clustered BizTalk environment.
I have checked, both the Host Instances are running properly, on the same environment.
I am also able to connect to the SQL database (Msgbox) server, that the BizTalk servers are pointing to.
Can you kindly guide on the same.

Hi Shalini,
This very well could be an SSO issue. Are you getting any SSO errors in the event log? Intermittent SSO issues could cause the
inconsistent results you are seeing.
Of course, as the port configuration is stored in the SSODB, if access to this database is restricted port configuration cannot be accessed
and so the message could not be delivered.
Refer: http://blog.sabratech.co.uk/2007/02/send-port-configuration-corresponding.html
Also, try changing the send handler to run under different host instance.
Rachit
Please mark as answer or vote as helpful if my reply does

Error while sending data from XI to BI System

Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
Narendra

Hi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal

Error while sending a message 501 not implemented

Hi all,
running some tests checking some Xi interfaces we have the following problem :
going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
On "send message to" we insert the string:
http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
Executing "Send Message", we get the following error :
"error while sending message : 501 not implemented"
Any suggestion ?
thanks in advance

Hi all,
using a 53100 port and xml code in payload it seems better but we get the following error:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     ... 20 more

Error while sending the email notifcation

Hi All
I am getting this error while sending the email notifcation.If any one of you have any idea regarding this please suggest
[2012-09-12T03:55:41.288-10:00] [soa_server1] [ERROR] [SDP-26102] [oracle.sdp.messaging.driver.email] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingdriver-email] Error while writing e-mail message content.[[
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
     at java.util.Vector.elementAt(Vector.java:427)
     at javax.mail.Multipart.getBodyPart(Multipart.java:157)
     at javax.mail.internet.MimeMultipart.getBodyPart(MimeMultipart.java:256)
     at oracle.sdpinternal.messaging.driver.email.EmailDriver.getHeaderEncoding(EmailDriver.java:1079)
     at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:670)
     at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
     at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
     at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
     at sun.reflect.GeneratedMethodAccessor2553.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy346.onMessage(Unknown Source)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
     at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
     at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
[2012-09-12T03:55:41.331-10:00] [soa_server1] [WARNING] [SDP-25107] [oracle.sdp.messaging.engine.store] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingserver] Message ID bac38bd50a1f32a129c5c739335a7855 in Status object does not match previously recorded Message ID b7e259a30a1f32a12c981a3ffd343f6d.
[2012-09-12T03:55:41.362-10:00] [soa_server1] [ERROR] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Error status received from UMS.[[
Status detail :
     Status type : DELIVERY_TO_GATEWAY:FAILURE,
     Status Content : Failed to set message headers: java.lang.ArrayIndexOutOfBoundsException: 0 >= 0,
     Addressed to : EMAIL:[email protected],
     UMS Driver : Farm_base_domain/base_domain/soa_server1/usermessagingdriver-email:oracle_sdpmessagingdriver_email#Email-Driver,
     UMS Message Id : b7e259a30a1f32a12c981a3ffd343f6d,
     Gateway message Id : ,
     Status Received at : Wed Sep 12 03:55:41 HST 2012.
Check status details and fix the underlying reason, which caused error.
[2012-09-12T03:55:51.492-10:00] [soa_server1] [WARNING] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Could not find notification record corresponding to failed notification : (Channel message id) : b7e259a30a1f32a12c981a3ffd343f6d[[
Hence it will not be retried.
Possible cause could be purging of notification data after sending out notification, but before receiving status.
]]

Are you using your email address to send the email notifications if it Is not configured with AD? Have you populated the mail attribute in weblogic console-->realms-->my realms-->users
In addition are you sure you have configured the 'Email Driver Properties' correctly in EM ?? have you specified the Notification Mode to Email ?
Please make sure that the outgoing mail server and port along with the username and password are correct.
Also validate the workflow settings in your EM?
In addition, please validate that when you logon to BPM worklist using the admin account and click on the name for e.g. weblogic, you see the email attribute populated properly.
Thanks
ACM

Error while sending email to distribution list

Hello All,
I am not able to send the email to Shared & Private distribution list.
It is giving an error "Function <Send> not possible"
I can send the email to users by specyfying their email id & recepient type as Internet address while sending mail from the Business Workplace. But we want to send it to users in shared/private distribution list.
SCOT, SMTP are properly configured as per SAP Note 455140.
Interestingly Routing Test in the SAPConnect shows no errors. Also the internal traces are enabled, but it shows nothing for the outbound traces.
Response starting with "220", in the telnet results (for both SAP server & Exchange server) confirms that the SCOT configuration is correct for Mail Host & Mail Port.
We are on ECC6 on Oracle 10g & Windows.
I have searched this forum but couldnot find relevant answer.
If anybody has faced such problem, let me know how to resolve this.
Regards,
Vivdha

Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael.

MSDTC Error on Send Port

Similar Messages

Maybe you are looking for