Error in send port executed procedure in Biztalk and SQL Server

Hi,
I have a send port which call the below stored procedure
USE
GO
SET
ANSI_NULLS
ON
GO
SET
QUOTED_IDENTIFIER
ON
GO
ALTER
@ProcessId
VARCHAR
(100),
@FilePath
we are revieving the Error as below and the send port is getting suspended
System.Data.SqlClient.SqlException: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 2.
can anyone just help me with this?

Begin TRANSACTION
END TRY
BEGIN CATCH
BEGIN
ROLLBACK TRANSACTION ;
END
Exactly, you have a BEGIN TRANSACTION and a ROLLBACK in error case, but no COMMIT at all.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

MSDTC Error on Send Port

Running BizTalk Server 2010, we've two identical Send Ports in two different BizTalk applications, both calling same stored procedure with same properties but one works and the other fails with the following error.
An error occurred while processing the message, refer to the details section for more information Message ID: {B44DCA75-BC09-40AA-99A3-09A6A9BC5CBB} Instance ID: {1074A172-0ADB-4045-A27D-EE6FC94D285A}
Error Description: System.Transactions.TransactionManagerCommunicationException: Communication with the underlying transaction manager has failed. ---> System.Runtime.InteropServices.COMException: The MSDTC transaction manager was unable to push the transaction
to the destination transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot find each other by their NetBIOS names, or the support for network
transactions is not enabled for one of the two transaction managers. (Exception from HRESULT: 0x8004D02A) at System.Transactions.Oletx.ITransactionShim.Export(UInt32 whereaboutsSize, Byte[] whereabouts, Int32& cookieIndex, UInt32& cookieSize, CoTaskMemHandle&
cookieBuffer) at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts) --- End of inner exception stack trace --- Server stack trace: at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult
result) at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result) at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result) at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult
result)
If it's a problem with the MS DTC or the stored procedure permissions, it should not work for both of these but it is working for one of them, which means the access and permissions
are fine, really bowled over this, any idea, what could be wrong?
Thanks
Syed

Hi Syed,
Your problem lies with firewall blocking your SQL outbound call .You need to Open the Ports to do the communication
Error ":Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot
find each other by their NetBIOS names, or the support for network transactions is not enabled for one of the two transaction managers."
Thanks
Abhisek

How to use ADO(Microsoft ActiveX Data Objective 2.8 Library) to execute the store procedure of database in SQL server

how to use ADO（Microsoft ActiveX Data Objective 2.8 Library) to execute the store procedure of database in SQL server?
Does any body can tell me about this?
thanks
[email protected]

Hi
Did you succeed to execute the procedure?
How ?
Thanks
Shimon Zerbib

Database Adapter and SQL Server procedure issue

Hello,
I am using Jdev 11.1.1.7.0 and SQL Server 2005.
In the Database Adapter configuration wizard, Specify Stored Procedure step, I choose the “GEACupax” schema and got the following error after a click on “Procedure Browse” button:
com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'GEACUPAX.INFORMATION_SCHEMA.SCHEMATA'.
The command Database Adapter tried to execute was:
(from jdev log:) select schema_name from GEACUPAX.INFORMATION_SCHEMA.SCHEMATA order by schema_name;
Note, the schema name has changed to uppercase. I think that is the problem. If I try this query in SQLDeveloper, it returns the same error. I can fix it changing the schema name to “GEACupax”. The case matters.
Any ideas?
Leandro.

Vijay,
Thanks for you reply.
I figure out a related bug:
Bug 12859472: Cannot browse store procedure in case-sensitive MS SQL Database
There are two possible workarounds:
1. Use a database name with capital letters
2. Do not use stored procedures, but access the tables directly.
The notes on the Bug ticket describes that the issue would be scheduled to be fixed in PS7 which is 11.1.1.8.
Cheers!
Leandro.

How to call procedure in Java from SQL Server Database

Hello Every Body
i Have Question about
How to call procedure in Java from SQL Server Database
Thanks

Hi,
have you tried a Google search? I just gave it a 3 second try and already found: http://stackoverflow.com/questions/6113674/how-do-i-execute-a-ms-sql-server-stored-procedure-in-java-jsp-returning-table-d
Frank

ORA-28545: error diagnosed by Net8 for DG4ODBC for link with SQL Server

Database: 11.2.0 Windows 32-bit (on WindowsXP SP3)
ORACLE_HOME = D:\Oracle\Product\11.2.0\dbhome
GATEWAY_HOME = D:\Oracle\Product\11.2.0\tg
odbc : sqlserver (working... i can import table's data in MS Excel) its ok...
D:\Oracle\Product\11.2.0\dbhome\hs\admin\initsqlserver.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = sqlserver
HS_FDS_TRACE_LEVEL = 0
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
D:\Oracle\Product\11.2.0\dbhome\NETWORK\ADMIN\listener.ora
# listener.ora Network Configuration File: D:\Oracle\Product\11.2.0\dbhome\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = orcl)
(ORACLE_HOME = D:\Oracle\Product\11.2.0\dbhome)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\Oracle\Product\11.2.0\dbhome\bin\oraclr11.dll")
(SID_DESC=
(SID_NAME=sqlserver)
(ORACLE_HOME = D:\Oracle\Product\11.2.0\dbhome)
(PROGRAM = dg4odbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.20.0.32)(PORT = 1521))
ADR_BASE_LISTENER = D:\Oracle\Product\11.2.0\dbhome
Listener Status
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.20.0.32)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 30-SEP-2011 11:13:53
Uptime 0 days 0 hr. 0 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\Oracle\Product\11.2.0\dbhome\network\admin\listener
.ora
Listener Log File d:\oracle\product\11.2.0\dbhome\diag\tnslsnr\stylo-dba
\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.20.0.32)(PORT=1521)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Service "sqlserver" has 1 instance(s).
Instance "sqlserver", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
D:\Oracle\Product\11.2.0\dbhome\NETWORK\ADMIN\tnsnames.ora
# tnsnames.ora Network Configuration File: D:\Oracle\Product\11.2.0\dbhome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.20.0.32)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
sqlserver =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.20.0.32)(PORT=1521))
(CONNECT_DATA =
(SID=sqlserver))
(HS = OK)
TNS PING Restult
C:\Documents and Settings\Administrator>tnsping sqlserver
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 30-SEP-2
011 11:15:47
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\Oracle\Product\11.2.0\dbhome\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=172.20.0.32)(PO
RT=1521)) (CONNECT_DATA = (SID=sqlserver)) (HS = OK))
OK (50 msec)
C:\Documents and Settings\Administrator>
Database Link
create database link sqlserver connect to uoracle identified by uoracle using 'sqlserver';
SQL>
SQL> select from sysobjects@sqlserver*
ERROR:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from DG4ODBC
SQL>
Waiting for help. What thing im missing.....

Hi Naeem,
You have said the install setup is -
ORACLE_HOME = D:\Oracle\Product\11.2.0\dbhome
GATEWAY_HOME = D:\Oracle\Product\11.2.0\tg
but in the listener.ora you have set ORACLE_HOME for the gateway as -
(ORACLE_HOME = D:\Oracle\Product\11.2.0\dbhome)
To use DG4ODBC installed in the 'tg' ORACLE_HOME then you should configure a listener in the gateway OH -
D:\Oracle\Product\11.2.0\tg\network\admin
and start this listener. This listener will need to use a different port from the RDBMS listener in the other OH.
Change the gateway tnsnames.ora entry used by the RDBMS to reflect this port change.
One other point - SQL*Server is case sensitive so you may need to create the database link as -
create database link sqlserver connect to "uoracle" identified by "uoracle" using 'sqlserver';
if the user/password are defined in lower case in SQL*Server.
Also, the same for object names depending on the SQL*Server configuration -
select "column_name" from "owner"."table_name"@sqlserver ;
Regards,
Mike
Edited by: mkirtley on Sep 30, 2011 8:12 AM

ODBC errors for Oracle Migration Workbench and SQL Server 2000 on Windows

Hi all-
I setup a new ODBC connection for the Oracle 10g Migration Workbench to MS SQL Server 2000 on Windows XP and keep getting the following errors when I try to
either test the new ODBC connection to MS SQL Server 2000 for use with the Oracle Migration Workbench tool. Goal is to fix these errors so that I can migrate our test SQL Server 2000 databases to Oracle 10g.
Current configuration
- Oracle 10.1 Migration Workbench
- Oracle 10g Database (target)
- MS SQL Server 2000 (source database)
-Windows XP
-ODBC 3.85.1117 driver for Windows XP with SQL Server and Oracle
Errors:
I. When I test the ODBC connection:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL server not found.
TESTS FAILED!
Now here is what has me totally confused:
I can use the command line ISQL to access the database on the server and IP is all correct and port is available. So I can access the SQL Server database fine it is when I try to setup ODBC that it gives me problems.
Any tips how to get this ODBC working?
Thanks
Ben Prusinski

1. Jing Jin. If you had READ the post you would have seen that installing later versions is NOT an option.
2. Not supported does NOT mean does NOT work, as Balmukund pointed out in the referenced thread. The site that this databases supports is using ASP which is also NOT supported by Microsoft. As it turns out Balmukund's solution actually turns
out to be the correct solution. I installed SS2K and its Service pack 4 on the machine last night. Good answer Balmukund. as we say in the Navy, "BRAVO ZULU!!" which means "WELL DONE!!
3. Tom Li I just posted the question less than 48 hours ago. My last post was less than 24 hours ago. I think I have the right to be given the opportunity to determine whether a reply is the answer or not. I understand you don't like unanswered
posts sitting around for weeks, months or years. (I don't like it either as I have a few that are still unanswered after several years.) But you should not be showing replies as answers before I even get a chance to see them, much less try them out.
You should also not be showing replies as answers which don't address the criteria of the question. I specifically stated that I had to install SS2K. I went on to state, "And before anyone asks I need to install this version because that is what
the customer is using and I need to duplicate their databases." So the correct answer, if in fact SS2K did not work on Windows 7, would have been a virtual machine answer, as suggested on the thread Balmukund referenced. So before you mark a reply
as an answer read the question.
Edward R. Joell MCSD MCDBA

Syntax error when creating a user-defined table type in SQL Server 2012

Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
CREATE TYPE ReportsTableType AS TABLE
( reportId INT
, questionId INT
, questionOrder INT );
Results:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'AS'.

Hope these posts could help,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
Regards, Dineshkumar,
Please Mark as Answer if my post answers your question and
Vote as Helpful if it helps you

SMS_SRS_REPORTING_POINT - Error retrieving folders with SCCM 2012 and SQL Server 2008 R2 SP2

Hi:
According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the
listed reports I get errors and no report runs.
I am running SQL Server 2008 R2 SP2 on a remote server. SQL is installed on its own server. There is no firewall between the Configuration Manager server and SQL Server.
Thanks.
Mark
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:15:07 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
SRSRP registry key change notification triggered.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:17:40 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)

Hi:
Windows Firewall is off on both systems.
I can ping the Configuration Manager server from the SQL Server by netbios name, ip address and fully qualified domain name.   I can ping the SQL Server from the Configuration Manager server by netbios name, ip address and fully qualified domain
name.
I have uninstalled and installed the Reporting Point Service a couple of times and everything looks fine according to the logs after the install finishes but these errors only appear each time I try and Run a report.
Mark

Migrate biztalk 2006R2/SQL server 2005 projects to Biztalk 2013/SQL server 2012

We have Biztalk application projects deployed on Biztalk 2006R2/SQL server 2005 environment on a single server
Now we have installed and configured Biztalk 2013/SQL server 2012 in a multicomputer environment where Biztalk server is on one computer while SQL server is on the other.
Now it's time to migrate the projects 2006R2 to 2013.. Is it a smooth process? I found a lot of posts about migration from 2006R2 to Biztalk 2010... Just wondering if it is similar or more complex?? Appreciate any help/suggestions.. thanks!!

Hi Annee,
Following article should answer your question:
BizTalk Application Migration Guide
Also have a look at following forum post:
http://social.msdn.microsoft.com/Forums/en-US/f9ac6b6c-3dbe-487b-85c5-448d257d62f4/migration-from-biztalk-server-2006-to-2013?forum=biztalkgeneral
Maheshkumar S. Tiwari|http://tech-findings.blogspot.in/

Linked Server error: Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON' between sql server 2005 32 bit and sql server 2012 64 bit

Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.S

Hello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Sap4.7 and sql server 2000 on windows2003:when install di ,error:MDB-05039

sap4.7 and sql server 2000 on windows2003:
when install database instance ,there is a error,at change tempdb
MDB-05039:Unable to stop server dev ,
please help !!!!

Every time you start SQL Server it also creates a new tempdb. When you change the layout (physical structure, size) you have to restart SQL Server in order for these changes to take effect.
It seems that the installation routine has changed the layout (it does that according to your input!) and is now trying to stop and restart SQL Server. When you run into this error, have you tried to stop and restart SQL Server manually? After that choose the Retry option of the installation routine. Just a guess...
Do you have some more log information?
Sven

Error on Send Port configured using HTTP adapter

Hi All,
For Load balancing purpose we have created new host and host instance and changed send handler for send port configured using
plain HTTP adapter.
We are getting below error after change:
A password is mandatory if UserName is specified
Parameter name: Password
Please advice.
Thanks
Pooja Jagtap Software Engineer KPIT Cummins

Have you updated the password for your Host instance . Try restarting your host instance once .
Thanks
Abhishek

Error ORA-03113 when execute procedure via OEM

Hi All,
I got error messages
ORA-03113: end-of-file on communication channel
ERROR at line 1:
ORA-03114: not connected to ORACLE
when execute procedure via Oracle Enterprise Manager
Who do you know what 's the problem and how can I resolves ?
Thanks,
Mcka

Solution Description:
=====================
The ORA-3113 error is a general error reported by Oracle client tools,
which signifies that they cannot communicate with the oracle shadow
process. As it is such a general error more information must be collected
to help determine what has happened.
This short article describes what information to collect for an
ORA-3113 error when the Oracle server is on a Unix platform.
General Issues:
===============
1) Is it only one tool that encounters the error or
do you get an ORA-3113 from any tool doing a similar operation?
If the problem reproduces in SQL*Plus, use this in all tests
below.
2) Check if the problem is just restricted to:
[ ] One particular UNIX user,
[ ] Any UNIX user
or [ ] Any UNIX user EXCEPT as the Oracle user.
3) Check if the problem is just restricted to:
[ ] One particular ORACLE logon
or [ ] Any ORACLE logon that has access to the
relevant tables.
4) If you have a client-server configuration does this occur from:
[ ] Any client
[ ] Just one particular client
or [ ] Just one group of clients ?
If so what do these clients have in common ?
Eg: Software release .
5) Do you have a second server or database version where the
same operation works correctly?

Error in send port executed procedure in Biztalk and SQL Server

Similar Messages

Maybe you are looking for