MSE and Zones (Cisco Connected Mobile Experience)

Hello everybody,
I am trying to do Cisco Connected Mobile Experience work using Cisco Prime 1.3, MSE 7.4, WLC 7.4 (everything virtual appliance) and Meridian App.
It is working well, but although I have configured some zones on Cisco Prime, it is not shown on MSE and Meridian.
What can be happening? Why aren't zones shown?

Dear andre.ortega,
we have similar project.
And may be you can help me, geting answers for my questions.
1. MSE v 7.5 will support navigation features. Can MSE output this information via API to Mobile Apps?
2. did u investigate other solutions for mobile apps then Meridian?
thank you.

Similar Messages

BT and Java - Btl2Cap Connection (Mobile phone and Digital Pen)

Hi!
First a short Introduction:
For a project I have to stream data from Maxell Penit DP201(4.1) to a mobile device (over a midlet). Data Connection is built up over Bluetooth.
My Questions are: Is btl2cap the right method for connecting digital pen and mobile phone?
If yes, is the btl2cap string correct?
The pens device adress is 00-07-CF-56-05-5D
Does anyone know a sample application like this I want to program?
Structure;
package /
Midlet
Class extending thread
Here's the code:
public void run() {
    //Bluetooth
    //String connString = "btspp://0007808303AA:1;master=false";
    String connString = "btl2cap://localhost:0007cf56055d;ReceiveMTU=512;TransmitMTU=512";
    System.out.println(connString);
    try {
            LocalDevice local = LocalDevice.getLocalDevice( ) ;
// build ServiceRecord
            local.setDiscoverable(DiscoveryAgent.GIAC);
L2CAPConnectionNotifier service = (L2CAPConnectionNotifier)
Connector.open(connString);
ServiceRecord sr = local.getRecord(service);
// accept Connection
L2CAPConnection connection = (L2CAPConnection ) service.acceptAndOpen( );
        } catch (Exception e) {
            e.printStackTrace();
        }Thanks to all who can help me to reach the next step in my project.
Best regards

Hi,
The reason for the compilation error is that the IDE is not able to find the jar file where bluetooth api is packed. try to put the jar file in lib directory of the project. Some IDE generates class files even though there are some compilation errors in java file.
So it is better to resolve compilation errors before putting it in the device.
The reason why the app freezes in the device is that you have not used a seperate thread to do the inquiry, try to use a thread where the inquiry will be done so that the apps main thread will respond to the user input.
Hope this help you.

Can Cisco connect be used for small business web filtering?

I am searching for a web filtering solution for our small church. The core requirement is to use a hardware-based solution to filter all internet traffic. Our current wiring looks like this: [ISP router] --> [switch] --> [Open Mesh wireless access points]. Can I connect a Linksys EA2700/3500/4500/6500 between the [ISP router] and the [Switch], disable the Linksys wireless, and use Cisco Connect to filter all the internet traffic?
More info: We will only have a handful of wired/wireless devices which we have control over. We expect most of the rest of the traffic to be generally outside our control via personally owned devices connecting thru the public wifi. Therefore any solution which requires installation of software on individual devices will not work.
(If there are other threads on this topic I'd be more than happy to read them, I just couldn't find any.)
Thanks!!

Hey
check this article:
http://www.oracle.com/technology/pub/articles/cunningham-database-xe.html
Regards

Cisco connect software wants to match the admin password to cisco connect password?

As much as possible i want only one SSID for my router, so i dont want to have another SSID for guest. To protect my router
settings I need to have a different admin password from those of passphrase (i.e. wifi password).
Why is it that cisco connect software wants to match the admin password to cisco connect password?
The cisco connect password is the same as the passphrase. I think its unsafe to have similar passes for both admin password
and passphrase.
Is there any way that cisco connect software would work under different admin password & passphrase?

From what I can tell, the router is set up so that it broadcasts two seperate SSID's with two unique passwords. If you logon to the SSID-Guest network, you are not allowed any kind of Admin access to the router. If you attempt to use the Cisco Connect software, you'll eventually get an error saying that it could not find a network (unless there is an unconfigured router running factory defaults in range). I verified this using a Cisco Linksys E4200 and a few laptops.
So long as you utilize the guest network properly, you should be able to maintain security on your network and use Cisco Connect. Obviously this isn't ideal for most commercial use, but then again I don't know why you would want to use this software on that scale.
If you are trying to keep one SSID for the network, I think you're going to have to use the web based service and do a little manual configuration.
TLDR: Seta different password for the guest network and never give out the primary network password. Guests don't have admin access, even while using Cisco Connect so long as they are connected to the -Guest SSID.

Trouble installing Cisco Connect for E4200

I just got a new E4200 router and downloaded Cisco Connect from the web site...file name CiscoConnect.E4200.1.4.11160.2.exe. When I try to run it, I find through Task Manager that Setup.exe is using about 35 to 40% CPU, but I'm never even getting to anything on the screen, nor is Task Manager even showing it as a running application. I'm running Windows XP SP3 (latest updates). I tuned off the AVG virus scan. But it still just seems to hang. Any ideas? BTW, I used the web interface to fully configure the router and it works fine so I could get by without Cisco Connect, but it might just be easier to use. Thanks. -Bruno

I suppose I've waited five to ten minutes.
This isn't Cisco Connect... it's the install Setup. I tried running it from the CD that came with the router and that one first had me agree to the terms, then it said it was downloading updates and just hung there... but I could see that it had given up actually downloading from the net. When I tried to install from the downloaded setup (not CD), it never got to any user interface.
I'll try again tomorrow and wait longer. But what would it be doing that would suck up CPU time so heavily. It's only an installation setup. BTW, both version sucked up CPU time and the Task Manager said it was Setup.exe that was doing it.

Remove device from Cisco Connect?

Help! I want to REMOVE a device from Cisco Connect and do not see how to do it.

I have a Linksys E3000 router and using Cisco Connect. When I go to Parental controls I see network device a few times but I do not know what theyu are. Is there a way to remove device from there or is there a way to find what the mac address is of the device and then is there a way to rename it???

Cisco connect on E3200

In the beginning everything was fine until i tried to change the PS3 frome NAT3 to NAT2. After many helps from telephone cisco of port forwarding and dmz and such nothing working, i reset the router and uninstalled cisco connect software.
Long story short...
I have internet connection on the laptop, desk top ISP printer and PS3 through the router
Run cisco connect and it says that i am off line
uninstalled, reset router many many times.
Help please

Well if the concerned is just with cisco connect software..
Then you can download the latest cisco connect software from the cisco website ( homesupport.cisco.com ).
Once it is downloaded on your computer.. Run the software it will reconfigure the router settings and will give the option to create your network name and password by urself too..

I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."

This might help restart it http://support.apple.com/kb/TS1567

Windows 8.1 and Cisco Connect Incompatable

I've upgrades a couple of PC's to Windows 8.1. Upon discovering the printer attached to my E4200 v1 by its USB port was not showing after the upgrade, I re-ran Cisco Connect to re-install the printer.
----At this point I'd like to say up front that the E4200 is running the latest firmware, and I am using the latest Cisco Connect available - albeit 2 years old.-----
Cisco Connect gets as far as the USB Printer connect button before displaying an error page telling me "our customer support can help" and giving a link to a support page that doesn't work. Typical Cisco I fear.......
Digging deeper, the Windows Device Manager is showing the system device SXUPTP driver has been blocked from loading, quote:
"The software for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver. (Code 48)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available."
Clicking on "Check for solutions" doesn't find one (typical Microsoft), and letting Windows search for a newer driver doesn't find anything either.
Both PC's, a laptop and a desktop, are the behaving the same - so not a PC issue. Both worked with Windows 8.0.
So what's the story Cisco? We need a Connect update, or at least a fixed driver - when will we see this?
Thnx.

Ok - no thanks to Cisco, I seemed to have found an answer. This is unofficial, do at your own risk. Creating a system restore point first would be sensible.
The clue is the Cisco SXUPTP driver is copyright to Silex. The E4200 must have a Silex chip on board to talk to the USB port, and the SXUPTP driver on the PC is what talks to the chip. I visited the Europe Silex site (the US site is harder to get through - it wants you to know which Silex chip you've got as a starting point) at:
http://www.silexeurope.com/en/home/support/productgroups/common-downloads/
I downloaded SX-Virtual Link 3.12.0 dated 29.05.2013 (05/29/2013 in US speak). This downloaded a zip file called s-33a3120a.zip. I unzipped the contents and ran Cosetup.exe to install. After a restart I now have a functioning SXUPTP driver 3.7.1.0. (Forget what the original Cisco one was - 3.5.0.0?)
Ran Cisco Connect again, and all proceeded as normal. Printer re-installed.
The Silex setup program also installs a piece of software called SX Virtual Link, which seems to offer some low level control over the link to the E4200 USB port. I haven't had a play with this.
So why did I have to hack my way through this? Why didn't Cisco post Windows 8 updates BEFORE it was released, let alone 8.1? NOT impressed.

I updated my LG G3 this week and now it SUCKS! When I'm connected to WIFI, nothing on Facebook works. The photos and videos won't populate. I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.

I updated my LG G3 this week and now it SUCKS! When I'm connected to WIFI, nothing on Facebook works. The photos and videos won't populate. I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now. Before I updated my phone, I really liked it, now I don't like my phone at all! When will this be fixed? I hope it's soon. I'm thinking of changing providers now.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Mobile Devices (Android and iOS) cannot Connect to WS 2008 RRAS L2TP VPN with Pre-Shared Key

I have my Windows Server 2008 standard installed with RRAS service and configure with L2TP VPN with pre-shared key. Services such as Active Directory, DHCP and DNS are not installed. The Internet connection doesn't pass through a router to my server machine.
I have the Verizon fios Internet cable plugged in to the server machine directly.
PCs running Windows and Mac OS X can connect to the server without problem. When I tried to connect by using android or iOS mobiles and tablets, they cannot connect to the server. If I change the VPN type to PPTP, the mobile devices can connect successfully
but I would like to use IPSec/L2TP since it's more secure.
I tried so hard to look for the solution for this issue on Internet but I had no luck on that. Can anyone please provide me some help, please ?
Thanks,
CK

Hi CK,
I think we may need to create a policy in Network Policies. Please follow the steps below,
Right click Network Policies, Click New.
Enter the policy name, click Next.
Click Add, select the Day and Time Restrictions, click
Add.
In the Day and Time Restrictions, choose Permited for
all, click OK.
Click Next five times(leave everything default), click
Finish.
Move the policy to top and try to connect with your device.
If issue persists, please make sure that the Connection Requet Policies have been configured properly.
For detailed information about how to create a network policy, please refer to the link below,
Configuring NPS network policies
http://technet.microsoft.com/en-us/library/dd441006.aspx
Best Regards.
Steven Lee
TechNet Community Support

I have an ipad3 which has been spontaneously restarting and is not connecting well to either mobile service or wireless networks.

I have an ipad3 which has been spontaneously restarting and is not connecting well to either mobile service or wireless networks. It has become unusable. Is there a software update to fix this issue?
I have tried removing and reinserting the sim card - I am not even being asked to put in the sim pin to unlock the sim
I have reset the network settings and reconnected to my wireless network. I can get onto the wireless network but the ipad does not connect to my carrier even though my mobile phone (same carrier) has great service.
It seems to me that due to the connecton issue the ipad then restarts itself so I cant even use it for the local apps that do not require any connection to run because every few minutes the unit reboots.
heading to an istore tomorrow to have it looked at but wondered if there is a software upate or setting I can change myself to fix this isse.
not happy after the cost of the unit and ony had a few days use before the issues started!

Thanks Alan,
in the end it was replaced at the Apple iStore, they restored factory settings and it was still playing up for them too. Weird but the replacement is working perfectly!!

TS1567 Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all my disap

Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!

Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

E2100L Cisco Connect and Network Magic compatibility issues with Mac OS X 10.7 Lion

When you will release the latest version for Wireless router Linksys E2100L?, because I bought a MAC with Lion and I can´t use my Router.
Regards,
Daniel

Older versions of Cisco Connect for Mac computers have compatibility issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect versions 1.4.11222 and newer are compatible with the Lion operating system.
Here is the link to ensure that Cisco Connect can be installed on your Mac: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a4e763be954243cfa0ab960c0fac7105_KB_23xxx_EN_v1.xm...
There is no such information about the release of Cisco Connect for E2100L for the Mac OS X (10.7 “Lion”) compatibility, so you need to wait for further release of the firmrware for E2100L.

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

MSE and Zones (Cisco Connected Mobile Experience)

Similar Messages

Maybe you are looking for